advertisement
Repeating a section within a title/ track
1
While playing a disc, press REPEAT A-B at the starting point.
2
Press REPEAT A-B again to end the section.
➜
The section A and B can be set only within the same title/track.
➜
The section will now repeat continuously.
3
Press REPEAT A-B again to resume normal playback.
Program favourite tracks
(audio CDs and VCDs)
You can play the contents of the disc in the order you want , by programming the order of the tracks to be played. Up to
99 tracks can be stored.
1
Stop playback, then press PROG on the front panel to enter program mode.
2
Use the numeric keypad (0-9) to enter a valid track number.
➜
"
FULL" will appear if you have programmed 99 tracks.
3
Press OK to store the track.
4
Repeat steps
2
~
3 to select other tracks.
5
Press
ÉÅ to start program playback.
Disc Operations
Clearing the program
●
Stop playback, then press the
Ç again.
➜
"
PROG CLR" appears.
Helpful Hints:
– If the DVD system is disconnected from the power supply, it will erase the program.
– For VCD, the program option is only possible if the PBC mode is turned off.
Using the menu bar to program
IMPORTANT!
You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting the TV”).
1
Stop playback, then press
SYSTEM
MENU.
➜
The menu bar will appear across the top of the TV screen.
2
Press
1 2 to select and press 4 to enter the program menu.
PROGRAM P 00 : 00
3
Use the numeric keypad (0-9) to enter the track number to be programmed.
➜
"
FULL" will appear if you have programmed 99 tracks.
4
Press
ÉÅ to start program playback.
To clear the program
●
Stop playback, then press the
Ç again.
TIPS:
The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.
21
advertisement