Using S-Video jack. Philips MX2600/55, MX2600

Option 3

4

2

1

* IMPORTANT!

– If S-Video is used for DVD playback, the system’s VIDEO OUT setting will need to be changed accordingly.

Using S-Video jack

1

Use an S-Video cable (not supplied) to connect the DVD system’s S-Video

OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV.

2

To hear the TV channels through this

DVD system, use the supplied audio cables (white / red) to connect AUDIO

IN-TV) jacks to the corresponding

AUDIO OUT jacks on the TV.

3

Before starting operation, press TV on the remote to select “

TV” in order to activate the input source.

Connections

9