advertisement
Edit Programs When
Selecting the 1 (WHEN) key, from the Edit Program menu, allows the time or button/event that activates the program to be changed. The display shows:
EDIT
1=TIMED 2=BUTTON
Times Programs
Selecting 1 (TIMED) sets the program to be activated at a specific time of day. You are prompted to enter the time and date or days of week. The current default value is shown for each item. Press ' # ' to accept the default.
12:00 AM 5/17
1=TIME
Select 1 (TIME) to enter the new time. If the desired time is the time in which sunrise or sunset will occur, press the up arrow key for sunrise, or the down arrow key for sunset before entering a time.
12:00
HHMM
↓
=SET/PM
You may also choose to have the program execute up to 120 minutes before or after the time of sunrise or sunset.
SUNSET
1=BEFORE 2=AFTER #=AT
If the 1(BEFORE) or 2(AFTER) key is selected, you will be prompted to select the amount of minutes:
ENTER
0-120
When entering a time of day, AM/PM must be specified for the time if the AM/PM format is being used. Otherwise the entered time should be 13:00-23:59.
AM
HHMM
↓
=SET/PM
Select 2 (DATE/DAY) to enter a new date or days of week.
DATE:
MMDD
Next, specify if the program will run once (on the specified date and then be deleted) or if the program will run every year on the specified date (yearly).
RUN
1=ONCE
To change days, press the down arrow (DAY) key. You will be prompted to enter the day(s) that the program will be activated.
Press 1-7 for Monday - Sunday, 0 for Once, 8 for Weekdays, and 9 for Weekends, then ' # '.
DAY(S):
1-7=MON-SUN
Press the ' # ' key and the display will then return to the Edit Program menu:
EDIT
1=WHEN 2=CMD 3=&COND
Page 58
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project