Diverting calls when your line is busy (divert if busy). Alcatel-Lucent IP Touch 610, IP Touch 610 WLAN Handset, IP Touch 310 WLAN Handset, IP Touch 310
Add to My manuals27 Pages
advertisement
4
4.10
Diverting calls when your line is busy (divert if busy)
Callers can be diverted to another telephone if you are already on the line.
Menu Ok
OK
Forward select the 'diversion' function
OK
Onbusy
OR
OK
Rediallist
Ok
OR
OK
Indiv.rep.
Ok
Ok
2 ab c
5 jkl
3 def
6 mn o number receiving diversion;
Keep in touch
• Predefined message:
diversion is acknowledged
OK
FixedMsg
Ok change language of message
Ok
Ok
OK
select the message to be sent
OR
OK
Gotomessage
Ok
•
Change language of message:
2 ab c
5 jkl
3 def
6 mn o enter the no. of the message to be sent
(01 to 27)
4.11
Do not disturb
You can make your terminal temporarily unavailable for all calls.
Menu Ok
OK
Forward select the 'diversion' function
OK
DoNotDisturb
Ok diversion is acknowledged
Callers wishing to contact you will see the 'Do Not Disturb' message displayed on their sets when they try to call..
Ok
OK
Language change language of message
• Personal message:
Ok Ok
OK
NewMsg
* Create a temporary personal message: create a temporary personal message*
2 ab c
5 jkl
3 def
6 mno send message enter the text: the number pad keys have letters that you can display by successive presses,
4.12
Leaving a recorded message for internal callers
You can leave a message on your terminal which will be displayed on the screen of the terminal calling you.
Menu Ok
OK
Forward select the 'diversion' function
OK
Text
Ok
OK
2 ab c
5 jkl
3 def
6 mno position the cursor in the entry field, erase last character entered,
Select a digit (keys 0 to 9): the digit can be accessed after all the characters of the key pressed have been displayed on the screen.
17
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 3 How to use this guide
- 7 Switch on your telephone
- 7 Switch off your telephone
- 7 Making a call
- 7 Receiving a call
- 7 Calling your correspondent by name (company directory)
- 7 Make a call using the personal phone book
- 7 Redialling
- 8 Make a call-back request to a busy number
- 8 Sending DTMF signals
- 8 Mute, so that your correspondent cannot hear you
- 9 Making a second call during a conversation
- 9 Answering a second call during a conversation;
- 9 Switching between calls (Broker call)
- 9 Transferring a call
- 10 Transfer a call to the voice mailbox of an absent party
- 10 Three-way conference with internal and/or external correspondents (conference)
- 10 Placing a call on hold (hold)
- 10 Placing an outside call on hold (parking)
- 11 Store a number
- 11 Adjust audio volume
- 12 Answering the general bell
- 12 Call pick-up
- 12 Hunting groups
- 12 Calling a correspondent on his/her loudspeaker
- 12 Sending a written message to an internal correspondent
- 13 Send a voice message copy
- 14 Sending a recorded message to a number / a distribution list
- 14 Broadcasting a message on the loudspeakers of a station group
- 14 Modify the automated attendant welcome message remotely
- 15 Selecting calls to be diverted
- 15 Diverting calls to another number (immediate diversion)
- 15 Diverting your calls to your voice message service
- 15 When you return, consult recorded messages
- 16 Activate/disable the personal assistant
- 16 Personal assistant : reaching you with one number only
- 16 Diverting calls to your pager
- 16 Forwarding your calls from the receiving terminal (“Follow me”)
- 16 Cancelling all diversions
- 17 Diverting calls when your line is busy (divert if busy)
- 17 Do not disturb
- 17 Leaving a recorded message for internal callers
- 18 Consulting written messages
- 18 Message notification
- 19 Initializing your voice mailbox
- 19 Customising your voice greeting
- 19 Modifying your personal code
- 19 Configuring the telephone ringer
- 20 Adjusting screen brightness
- 20 Selecting language
- 20 Programming your personal directory
- 21 Programming an appointment reminder
- 21 Lock / unlock your telephone
- 21 Configure the set according to the background noise (Noise mode)
- 22 Activate/deactivate the Key tones
- 22 Activate/deactivate the Warning tones
- 23 Batteries
- 23 Desktop Charger
- 24 Dual Chargers
- 24 The Gang Charger - only on Mobile IP Touch 610 WLAN
- 24 Cleaning the Chargers
- 25 start the call
- 25 Adjusting the volume level of the tones
- 25 Subscribing to channels
- 25 Making a call on another channel
- 25 Receiving a call
- 25 Selecting a channel
- 26 Adjusting the volume level of the tones
- 26 Change PTT volume