Programming an appointment reminder. Alcatel-Lucent IP Touch 610, IP Touch 610 WLAN Handset, IP Touch 310 WLAN Handset, IP Touch 310
Add to My manuals27 Pages
advertisement
5
* Enter the name :
2 ab c
5 jkl
3 def
6 mno enter the text: the number pad keys have letters that you can display by successive presses, position the cursor in the entry field,
OK
2 ab c
5 jkl
3 def
6 mno erase last character entered, enter a digit (keys 0 to 9).
Programming your telephone
5.9
Lock / unlock your telephone
•
Lock / unlock your telephone:
Menu
OK
Lock
Ok
2 ab c
5 jkl
3 def
6 mno enter your personal password
•
Locking the keypad:
Ok
OK
OK
Lock Keys
5.8
Programming an appointment reminder
You can define the time of a temporary reminder (one in 24 hours) or a permanent reminder (every day at the same time).
•
Programming an appointment reminder:
Menu
OK
Appointment
Ok Menu
OK
Ok select the type of appointment
(temporary or
•
At the programmed time, your telephone rings:
permanent)
2 ab c
5 jkl
3 def
6 mn o enter time of appointment
Ok
OR
your telephone is locked/unlocked
•
Lock the keypad automatically:
you can configure your set so that the keypad is blocked automatically after 5, 10 or 20 seconds.
OK
OK
Phone Settings
Ok
Keypad autolock
Ok
OK
select the time period before the automatic locking
•
Unlocking the keypad:
#
•
To cancel your appointment call-back request:
Ok
OK
Appointment
Menu
OK
Ok select the type of appointment
(temporary or permanent)
Menu Ok
OK
Clear enter the reminder time
5.10
Configure the set according to the background noise (Noise mode)
This function is used to configure the set to obtain optimal listening conditions depending on the background noise.
OK
OK
Phone Settings
OK
Noise mode
OK
OK
•
Normal: corresponds to most office environments.
•
High: corresponds to an average level of background noise.
•
Severe: corresponds to an extremely high level of background noise.
21
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 3 How to use this guide
- 7 Switch on your telephone
- 7 Switch off your telephone
- 7 Making a call
- 7 Receiving a call
- 7 Calling your correspondent by name (company directory)
- 7 Make a call using the personal phone book
- 7 Redialling
- 8 Make a call-back request to a busy number
- 8 Sending DTMF signals
- 8 Mute, so that your correspondent cannot hear you
- 9 Making a second call during a conversation
- 9 Answering a second call during a conversation;
- 9 Switching between calls (Broker call)
- 9 Transferring a call
- 10 Transfer a call to the voice mailbox of an absent party
- 10 Three-way conference with internal and/or external correspondents (conference)
- 10 Placing a call on hold (hold)
- 10 Placing an outside call on hold (parking)
- 11 Store a number
- 11 Adjust audio volume
- 12 Answering the general bell
- 12 Call pick-up
- 12 Hunting groups
- 12 Calling a correspondent on his/her loudspeaker
- 12 Sending a written message to an internal correspondent
- 13 Send a voice message copy
- 14 Sending a recorded message to a number / a distribution list
- 14 Broadcasting a message on the loudspeakers of a station group
- 14 Modify the automated attendant welcome message remotely
- 15 Selecting calls to be diverted
- 15 Diverting calls to another number (immediate diversion)
- 15 Diverting your calls to your voice message service
- 15 When you return, consult recorded messages
- 16 Activate/disable the personal assistant
- 16 Personal assistant : reaching you with one number only
- 16 Diverting calls to your pager
- 16 Forwarding your calls from the receiving terminal (“Follow me”)
- 16 Cancelling all diversions
- 17 Diverting calls when your line is busy (divert if busy)
- 17 Do not disturb
- 17 Leaving a recorded message for internal callers
- 18 Consulting written messages
- 18 Message notification
- 19 Initializing your voice mailbox
- 19 Customising your voice greeting
- 19 Modifying your personal code
- 19 Configuring the telephone ringer
- 20 Adjusting screen brightness
- 20 Selecting language
- 20 Programming your personal directory
- 21 Programming an appointment reminder
- 21 Lock / unlock your telephone
- 21 Configure the set according to the background noise (Noise mode)
- 22 Activate/deactivate the Key tones
- 22 Activate/deactivate the Warning tones
- 23 Batteries
- 23 Desktop Charger
- 24 Dual Chargers
- 24 The Gang Charger - only on Mobile IP Touch 610 WLAN
- 24 Cleaning the Chargers
- 25 start the call
- 25 Adjusting the volume level of the tones
- 25 Subscribing to channels
- 25 Making a call on another channel
- 25 Receiving a call
- 25 Selecting a channel
- 26 Adjusting the volume level of the tones
- 26 Change PTT volume