ST7MDT5-EMU2B Emulator User Manual 3 - STVD7
3 STVD7
STVD7 is an integrated development environment that allows you to edit, debug and rebuild your application all from within STVD7.
The following sections tell you:
•
Section 3.1
—how to install the STVD7 software,
•
Section 3.2
—how to launch STVD7,
•
Section 3.3
—a little about STVD7’s debugging features,
• Section 3.4
—what a workspace is,
• Section 3.5
—what toolchains and application files are supported by STVD7,
• Section 3.6
—how to create a STVD7 workspace,
• Section 3.7
—how to open existing workspaces,
• Section 3.8
—how to open binary files,
•
Section 3.9
—how to change your project settings,
•
Section 3.10
—how to save workspaces,
•
Section 3.11
—how to switch from the build context to the debug context,
• Section 3.12
—how to configure the target MCU in order to debug more accurately and efficiently.
3.1 Installing STVD7
Your emulator comes with the MCU on CD CD-ROM which contains a number of
ST7 software tools. These tools run under the Windows
®
95, 98 and Windows NT
® operating systems.
To install and setup the ST7 software tools, follow these steps:
1
Close all other open applications on your Windows desktop.
2
Insert the MCU on CD into your CD-ROM drive. The CD-ROM’s autorun feature will open up a welcome screen on your PC. If the autorun feature does not work, use Windows
®
Explorer to browse to the CD-ROM’ s root folder, and doubleclick on
Welcome.exe
.
3
Select Install Your Development Tools from the list of options. A new screen will appear listing the different families of STMicroelectronics MCUs.
4
Use your mouse to place the cursor over the
ST7 Tools option. Choose
ST Tools, then ST7 Toolchain from the lists that appear.
5
The install wizard will be launched. Follow the instructions that appear on the screen.
19/65
1
