ST7MDT5-EMU2B Emulator User Manual 3 - STVD7
2
Browse to the folder where your binary file is stored, and select All files (*.*) in the Files of type field.
3.9
3
Select your binary file (
*.hex
or
*.s19
) and click
Open.
The binary code in the
.s19
or
.hex
file will be loaded into STVD7 and you will be able to access the Disassembly Window. A workspace file (of the same name as the binary file, but with an extension
.wsp
) will be created automatically.
Changing your project settings
The Project menu contains the
Build and Rebuild All commands you need to recompile your application after having made changes to it in the course of debugging. You may also access your project or toolchain settings in the event you wish to change them.
31/65
3 - STVD7 ST7MDT5-EMU2B Emulator User Manual
From the main menu, select Project>Project Settings.
32/65
You can change your settings here and continue running your application. When you exit STVD7, the system will ask you if you want to save these settings in the workspace you have been working in. If you choose yes, these will become your new workspace settings; if you choose
no, these settings will be lost.
