Installing Optional Modules. Data Management 4.1

TimeClock Plus 4.1

11

This section will allow you to determine what you want your individuals to be referred to throughout TimeClock Plus. If you were tracking employee hours you would want the references to be “employee”. If you were tracking students, you would want the references to be “student”, etc.

15) Click on the

Finish button once you have completed this section.

16) If you would like to make any changes to the settings entered throughout the Quick Setup Wizard, click on the

Back

button. If the settings are correct, click

Finish to close the wizard.

Installing Optional Modules

Optional modules are available for Version 4.1 of the TimeClock Plus application, including Payroll Export Modules and Multi-

Company module. These modules can be installed by downloading the module via the AutoUpdate utility (Requires the use of an Activation Key provided by your TimeClock Plus representative). Once they are downloaded, or added to Module Manager, they have to be enabled through Module Manager.

Installing Modules Through AutoUpdate

The preferred method of installing a module is through the AutoUpdate utility. The steps of downloading a module through the AutoUpdate utility are as follows.

1) Open the AutoUpdate Utility.

2) 2. Click on the

Modules button.

3) 3. Input the activation key provided by your TimeClock Plus Sales Representative or by the TimeClock Plus Support

Technician for the module, and click on the

Ok button.

4) 4. The module will be downloaded and added to the list of available modules in Module Manager.

Note: Anytime that you are using AutoUpdate, you must have an internet connection already established, if not,

AutoUpdate will not be able to retrieve the updates or modules until a connection to the internet is made.

Adding the Module from a file

In the event that a module cannot be acquired through AutoUpdate, a module can be added by file from a TimeClock Plus Support Technician. In order to add the module into the list of modules in Module

Manager, complete the following steps.

1) In the

TimeClock Plus Module Manager window, click on the Add button.

2) In the

Add Module window, click on the browse (…) button. Browse to the location of the .dll file for this module, select the directory, and click

open.

3) Select the module from the list and click on the

Ok button.

4) Input the activation key provided by your TimeClock Plus Sales Representative or by the TimeClock Plus Support

Technician for this module, and click on the

Ok button. This module will be added in the list of available modules in

Module Manager.

Note: Once the module has been added to Module Manager, it must now be activated (enabled). When you install a module in module manager, it is automatically activated for the current company.

Loading the Module