- No category
advertisement
3.4 Memory
3.4.1 SRAM
The OP6800 module is designed to accept 128K to 512K of SRAM packaged in an SOIC case. The standard OP6800 modules come with 128K of SRAM.
3.4.2 Flash Memory
The OP6800 is also designed to accept 128K to 512K of flash memory. The standard
OP6800 modules comes with one 256K flash memory.
NOTE: Z-World recommends that any customer applications should not be constrained by the sector size of the flash memory since it may be necessary to change the sector size in the future.
A Flash Memory Bank Select jumper configuration option based on 0
Ω
surface-mounted resistors exists at header JP2 on the RabbitCore module. This option, used in conjunction with some configuration macros, allows Dynamic C to compile two different co-resident programs for the upper and lower halves of the 256K flash in such a way that both programs start at logical address 0000. This is useful for applications that require a resident download manager and a separate downloaded program. See Technical Note TN218,
Implementing a Serial Download Manager for a 256K Flash, for details.
User’s Manual 23
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 1.1 Description
- 5 1.2 Features
- 6 1.3 Development and Evaluation Tools
- 6 1.3.1 Tool Kit
- 7 1.3.2 Software
- 8 1.4 CE Compliance
- 9 1.4.1 Design Guidelines
- 9 1.4.2 Interfacing the OP6800 to Other Devices
- 11 2.1 Connections
- 14 2.2 Demonstration Program on Power-Up
- 14 2.3 Display Contrast Adjustment
- 15 2.4 Programming Cable Connections
- 16 2.5 Installing Dynamic C
- 16 2.6 Starting Dynamic C
- 17 2.7 PONG.C
- 17 2.8 Where Do I Go From Here?
- 20 3.1 Pinouts
- 21 3.2 Digital I/O
- 21 3.2.1 Digital Inputs
- 22 3.2.2 Digital Outputs
- 23 3.3 Serial Communication
- 23 3.3.1 RS
- 23 3.3.2 RS
- 25 3.3.3 Programming Port
- 26 3.3.4 Ethernet Port (OP6800 models only)
- 27 3.4 Memory
- 27 3.4.1 SRAM
- 27 3.4.2 Flash Memory
- 28 3.5 Keypad Labeling
- 32 4.1 Programming Cable
- 32 4.1.1 Switching Between Program Mode and Run Mode
- 32 4.1.2 Detailed Instructions: Changing from Program Mode to Run Mode
- 32 4.1.3 Detailed Instructions: Changing from Run Mode to Program Mode
- 33 4.2 OP6800 Libraries
- 34 4.3 Sample Programs
- 34 4.3.1 Board ID
- 34 4.3.2 Demonstration Board
- 35 4.3.3 Digital I/O
- 35 4.3.4 Serial Communication
- 35 4.3.5 LCD/Keypad Module Sample Programs
- 36 4.3.6 TCP/IP Sample Programs
- 37 4.4 Font and Bitmap Converter
- 39 5.1 TCP/IP Connections
- 41 5.2 TCP/IP Sample Programs
- 41 5.2.1 How to Set IP Addresses in the Sample Programs
- 42 5.2.2 How to Set Up your Computer’s IP Address for a Direct Connection
- 43 5.2.3 Run the PINGME.C Demo
- 43 5.2.4 Running More Demo Programs With a Direct Connection
- 44 5.2.5 LCD/Keypad Sample Programs Showing TCP/IP Features
- 45 5.3 Where Do I Go From Here?
- 47 6.1 Installation Guidelines
- 48 6.2 Mounting Instructions
- 48 6.2.1 Bezel-Mount Installation
- 52 A.1 Electrical and Mechanical Specifications
- 55 A.2 Conformal Coating
- 56 A.3 Jumper Configurations
- 57 A.4 Use of Rabbit 2000 Parallel Ports
- 59 A.5 I/O Address Assignments
- 61 B.1 Power Supplies
- 62 B.2 Batteries and External Battery Connections
- 62 B.2.1 Battery-Backup Circuit
- 63 B.2.2 Power to VRAM Switch
- 63 B.2.3 Reset Generator
- 64 B.3 Chip Select Circuit
- 66 C.1 Mechanical Dimensions and Layout
- 67 C.2 Power Supply
- 69 C.3 Using the Demonstration Board
- 74 D.1 Board Initialization (OP68xx.LIB)
- 75 D.2 Digital I/O (OP68xx.LIB)
- 76 D.3 Serial Communication (OP68xx.LIB)
- 78 D.4 LEDs (OP68xx.LIB)
- 79 D.5 LCD Display
- 96 D.6 Keypad