Basic Settings. KYOCERA FS-C2026MFP+, ECOSYS FS-C2626MFP, FS-C2126MFP+, ECOSYS FS-C2126MFP, FS-4200DN, ECOSYS FS-C2526MFP, FS-2100D, FS-4100DN, FS-4300DN, FS-2100DN
Add to My manuals96 Pages
advertisement
4 Basic
In the Basic tab, you can specify the most commonly used printer driver settings.
To return to the original settings, click Reset. The Reset button is available when accessing the printer driver from the application's Print dialog box.
Basic Settings
Printer Driver
The Basic tab contains several settings for the most commonly used printing tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws paper from. Unless you are using a custom paper type, you can leave it set to Auto source selection.
Page Sizes
This setting should match the page size setting in your application. The printing result is based on the page size specified in this setting. You can also create a custom page size.
Media type
This setting selects the Source based on the types of media that are specified in the printing system. In general, you can leave it set to
Unspecified.
4-1
advertisement
Key Features
- Laser
- 1200 x 1200 DPI
- Printing colours: Black
- A4 40 ppm
- Duplex printing
- Ethernet LAN
- Built-in display
- Maximum duty cycle: 150000 pages per month
- Total input capacity: 500 sheets Total output capacity: 250 sheets
- Internal memory: 256 MB 750 MHz