advertisement
![Specifications. Panasonic PT-DS8500U | Manualzz Specifications. Panasonic PT-DS8500U | Manualzz](http://s1.manualzz.com/store/data/009757435_1-a1a1ab5b5ecba2761d45dc4a2146cb9f-360x466.png)
Specifications
Amps
DLP chip
Lens scanning frequency
Model No.
Power supply
Power consumption
Panel size
Display system
Number of pixels
Projection lamp
Optical output
*2
Applicable
*1
For RGB signal
For YP
B
P
R
signal
For video signal
(S-video included)
PT-DZ8700U
970 W
PT-DS8500U
AC120 V 60 Hz
950 W
When [STANDBY MODE] is [ECO] : Approx. 0.2 W
When [STANDBY MODE] is [NORMAL] : Approx. 6 W
PT-DW8300U
9.5 A
0.96 inch (aspect ratio 16 : 10)
2 304 000 pixels
(1 920 × 1 200 dots) × 3
0.95 inch (aspect ratio 4 : 3)
9.0 A
Three-unit DLP chip, DLP type
1 470 000 pixels
(1 400 × 1 050 dots) × 3
0.85 inch (aspect ratio 16 : 9)
1 049 088 pixels
(1 366 × 768 dots) × 3
Option
2 bulbs × 355 W UHM lamp
10 600 lm (ANSI)
H : 15 kHz - 100 kHz, V : 24 Hz - 120 Hz
PIAS (Panasonic Intelligent Auto Scanning) system
9 600 lm (ANSI)
Dot clock frequency
Less than 162 MHz
[480i]
[480p]
[720/50p]
[1 035/60i]
[1 080/60i]
[1 080/25p]
[1 080/30p]
[1 080/50p]
H: 15.73 kHz,
H: 31.5 kHz,
H: 37.5 kHz,
H: 33.75 kHz,
H: 33.75 kHz,
H: 28.13 kHz,
H: 33.75 kHz,
H: 56.25 kHz,
V: 59.94 Hz
V: 59.94 Hz
V: 50 Hz
V: 60 Hz
V: 60 Hz
V: 25 Hz
V: 30 Hz
V: 50 Hz
[576i]
[576p]
[720/60p]
[1 080/50i]
[1 080/24p]
[1 080/24sF]
[1 080/60p]
H: 15.63 kHz,
H: 31.25 kHz,
H: 45 kHz,
H: 28.13 kHz,
H: 27 kHz,
H: 27 kHz,
H: 67.5 kHz, z
HD/SYNC, VD terminals are not compliant with 3 value composite SYNC.
V: 50 Hz
V: 50 Hz
V: 60 Hz
V: 50 Hz
V: 24 Hz
V: 48 Hz
V: 60 Hz
H : 15.75 kHz/15.63 kHz, V : 50 Hz/60 Hz
Color system
Screen size
Screen aspect ratio
Projection scheme
Contrast ratio
Terminals
For DVI-D/HDMI signal
For SDI signal
RGB1 IN
RGB2 IN
480p, 576p, 720/60p, 720/50p, 1 080/60p, 1 080/50p, 1 080/60i, 1 080/50i, 1 080/24sF, 1 080/30p,
1 080/25p, 1 080/24p z z
Displayable resolution : VGA - WUXGA (non-interlace)
Dot clock frequency : 25 MHz - 162 MHz
SMPTE259M compatible: [480i], [576i]
SMPTE292M compatible: [720/60p], [720/50p], [1 035/60i],
[1 080/60i], [1 080/50i], [1 080/25p],
[1 080/24p], [1 080/24sF], [1 080/30p]
—
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
70 inch - 600 inch *3
16 : 10 4 : 3 16 : 9
Menu-selectable from front/rear/ceiling mount, and floor mounting
10 000 : 1 (when [DYNAMIC IRIS] has been set to [3])
1 set, BNC × 5
[RGB signal] 0.7 V [p-p]
[YP
B
P
R
HD/SYNC
VD
75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
TTL high impedance, automatic positive/negative polarity compatible
TTL high impedance, automatic positive/negative polarity compatible
signal] Y : 1.0 V [p-p] Synchronization signal included, P
B
P
R
: 0.7 V [p-p] 75 Ω
1 set of high density, D-sub 15-pin (female)
[RGB signal] 0.7 V [p-p]
[YP
B
P
R
HD/SYNC
VD
75 Ω (G-SYNC : 1.0 [p-p] 75 Ω)
TTL high impedance, automatic positive/negative polarity compatible
TTL high impedance, automatic positive/negative polarity compatible
signal] Y : 1.0 V [p-p] Synchronization signal included, P
B
P
R
: 0.7 V [p-p] 75 Ω
124
- ENGLISH
Specifications
Model No.
VIDEO IN
S-VIDEO IN
DVI-D IN
HDMI IN
PT-DZ8700U PT-DS8500U
1 set, BNC, 1.0 V [p-p] 75 Ω
PT-DW8300U
1 set, Mini DIN 4-pin, Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω, compatible with S1 signal
1 set, DVI-D 24-pin (Single link), DVI 1.0 compatible, HDCP compatible
1 set, HDMI 19-pin (HDCP/Deep color compatible)
1 set, BNC, Y/CB/CR/4 : 2 : 2, 10 bits
SMPTE259M/SMPTE292M compatible
1 set, D-sub 9-pin, RS-232C compatible, computer control use
—
Terminals
SDI IN
SERIAL IN/OUT
REMOTE 1
IN/OUT
REMOTE 2 IN
LAN
Power cord length
Cabinet
Dimensions
Weight
Operating environment
Remote control
Power supply
Operating range
Weight
Dimensions
Ceiling bracket
Projection lens
1 set, M3 pin jack, wired remote control use, multiple connection use
1 set, D-sub 9-pin, external control use
1 set, RJ-45, network connection use, PJLink compatible, 10 Base-T/100Base-TX
3.0 m
Moulded plastic
Width : 530 mm (20 7/8"), Length : 200 mm (7 7/8"),
Height : 548.5 mm (21 19/32") (540 mm (21 1/4") : not including surface projection parts)
Approx. 24.0 kg (52.9 lbs.) *4
Temperature *5 : 0 °C to 45 °C
Humidity : 10 % to 80 % (no condensation)
DC 3 V (AA/R6 battery × 2)
Approx. 30 m (98'5") (when operated directly in front of signal receptor)
134 g (4.7 ozs.) (including batteries)
Width : 51 mm (2"), Length : 176 mm (6 15/16"), Height : 28 mm (1 3/32")
For high ceiling : ET-PKD310H
For low ceiling : ET-PKD310S
Ceiling Mount Attachment : ET-PAD310
ET-D75LE6, ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4
ET-D75LE5, ET-D75LE8
ET-D75LE10, ET-D75LE20, ET-D75LE30
Options
Lens Motor
Cover
Replacement
Lamp Unit
Replacement filter unit
Smoke Cut Filter
Frame
ET-D75MC1
ET-LAD310 (1 bulb), ET-LAD310W (2 bulbs)
ET-ACF310
ET-SFD310
ET-PFD310
*1 :
*2 :
*3 :
*4 :
*5 :
Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
If ET-D75LE5 is installed, screen size is 70 inches - 300 inches.
This is the average value. It may differ depending on each product.
When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be
5 °C lower than this higher limit.
When a Smoke Cut Filter is used, the ambient temperature is 0 °C to 35 °C. However, use at high altitudes is not possible.
z
The part numbers of accessories and separately sold components are subject to change without notice.
ENGLISH -
125
Specifications
Dimensions
<Unit : mm>
462 (18 - 7/32")
530 (20 - 7/8")
26 (1 - 1/32") 468 (18 - 7/16")
About brand
Trademark Acknowledgement z z z z z
Microsoft ® and its logos, Windows ® , Windows ® XP, Windows Vista ® , Windows ® 7, and Internet Explorer ® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Macintosh, Mac OS and Safari are the trademarks of Apple Inc. registered in the United States and other countries.
PJLink™ is a pending trademark in Japan, the United States, and other countries and regions.
HDMI, the HDMI logo and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC.
Other types of names such as company names and product names appearing in this instruction manual are trademarks or registered trademarks of their respective holders.
The ® and TM marks are not indicated in this instruction manual.
126
- ENGLISH
advertisement
Related manuals
advertisement
Table of contents
- 2 Important Information
- 2 Important Safety Notice
- 8 Precautions with regard to safety
- 8 WARNING
- 11 CAUTION
- 11 Cautions when transporting
- 12 Cautions when installing
- 14 Security
- 14 Cautions on use
- 15 Cleaning and maintenance
- 15 Disposal
- 16 Accessories
- 17 Preparation
- 17 About Your Projector
- 17 Remote control
- 18 Projector body
- 20 Setting projector ID number to remote control
- 20 Using a wired remote control
- 21 Getting Started
- 21 Setting up
- 21 Projection method
- 22 Screen size and throw distance
- 33 Front leg adjusters and throwing angle
- 34 Connections
- 34 Before connection to the projector
- 35 Connecting example : AV equipment
- 36 Connecting example : Computers
- 37 Removing/attaching the projection lens (optional)
- 37 How to install the projection lens
- 37 How to remove the projection lens
- 38 Basic Operation
- 38 Powering ON/OFF
- 38 Connecting the power cord
- 39 Powering up the projector
- 39 Making adjustment and selection
- 40 Powering off the projector
- 40 Direct power off function
- 41 Projecting
- 41 Selecting the input signal
- 41 How to adjust the focus, zoom and shift
- 42 Adjustment range after lens position (optical shift)
- 43 Moving the projection lens position to the home position
- 43 Lens adjustment to compensate for uneven screen focus
- 46 Basic operations using the remote control
- 46 Using the SHUTTER function
- 46 On-screen display function
- 46 Switching the input signal
- 46 STATUS function
- 47 Automatic adjustment
- 47 Using the FUNCTION button
- 47 Displaying the internal test pattern
- 48 Changing the picture aspect ratio
- 49 Settings
- 49 Menu Navigation
- 49 Navigating through the menu
- 50 MAIN MENU
- 50 SUB MENU
- 52 PICTURE menu
- 52 PICTURE MODE
- 53 CONTRAST
- 53 BRIGHTNESS
- 53 COLOR
- 53 TINT
- 54 COLOR TEMPERATURE
- 55 GAMMA
- 55 SYSTEM DAYLIGHT VIEW
- 56 SHARPNESS
- 56 NOISE REDUCTION
- 56 DYNAMIC IRIS
- 57 SYSTEM SELECTOR
- 57 To display pictures complying with the sRGB standard
- 58 POSITION menu
- 58 SHIFT
- 58 ASPECT
- 59 ZOOM
- 60 CLOCK PHASE
- 60 GEOMETRY (PT-DZ8700/PT-DS8500 only)
- 62 KEYSTONE (PT-DW8300 only)
- 63 ADVANCED MENU
- 63 DIGITAL CINEMA REALITY
- 63 BLANKING
- 64 INPUT RESOLUTION
- 64 CLAMP POSITION
- 64 EDGE BLENDING
- 66 FRAME DELAY
- 66 RASTER POSITION
- 67 DISPLAY LANGUAGE menu
- 67 Changing the display language
- 68 DISPLAY OPTION menu
- 68 COLOR MATCHING
- 69 LARGE SCREEN CORRECTION
- 69 SCREEN SETTING (PT-DZ8700/PT-DS8500 only)
- 70 WAVEFORM MONITOR (PT-DZ8700 only)
- 71 AUTO SIGNAL
- 71 AUTO SETUP
- 72 RGB IN (Only RGB input)
- 72 DVI-D IN
- 73 HDMI IN
- 73 SDI IN (PT-DZ8700/PT-DS8500 only)
- 73 ON-SCREEN DISPLAY
- 74 BACK COLOR
- 74 STARTUP LOGO
- 74 FREEZE
- 75 PROJECTOR SETUP menu
- 75 PROJECTOR ID
- 75 INSTALLATION
- 75 HIGH ALTITUDE MODE
- 76 COOLING CONDITION
- 76 LAMP SELECT
- 76 LAMP RELAY
- 77 LAMP POWER
- 77 BRIGHTNESS CONTROL
- 81 STANDBY MODE
- 81 SCHEDULE
- 82 RS-232C
- 83 STATUS
- 84 NO SIGNAL SHUT-OFF
- 84 REMOTE2 MODE
- 84 FUNCTION BUTTON
- 84 DATE AND TIME
- 85 LENS CALIBRATION
- 85 FILTER COUNTER RESET
- 86 SAVE ALL USER DATA
- 86 LOAD ALL USER DATA
- 86 INITIALIZE
- 86 SERVICE PASSWORD
- 87 P IN P menu
- 87 Using the P IN P function
- 87 Setting the P IN P function
- 88 TEST PATTERN menu
- 88 TEST PATTERN
- 89 SIGNAL LIST menu
- 89 Registering a signal to the list
- 89 Renaming a registered data
- 89 Deleting a registered data
- 90 Managing the sub memory list
- 91 SECURITY menu
- 91 SECURITY PASSWORD
- 91 SECURITY PASSWORD CHANGE
- 92 DISPLAY SETTING
- 92 TEXT CHANGE
- 92 MENU LOCK
- 92 MENU LOCK PASSWORD
- 93 CONTROL DEVICE SETUP
- 94 NETWORK menu
- 94 NETWORK SETUP
- 94 NETWORK CONTROL
- 94 NETWORK STATUS
- 95 Network connections
- 96 Accessing from the Web browser
- 107 Maintenance
- 107 Monitor Lamp indicators
- 107 Managing the indicated problems
- 109 Replacement
- 109 Before replacing the unit
- 109 Replacing the unit
- 112 Troubleshooting
- 114 Appendix
- 114 Technical Information
- 114 PJLink protocol
- 115 Control commands via LAN
- 117 Serial terminal
- 120 REMOTE 2 IN terminal
- 121 Two window display combination list
- 121 Restoring the MENU LOCK PASSWORD to default
- 122 List of compatible signals
- 124 Specifications
- 126 Dimensions
- 126 About brand
- 127 Ceiling mount bracket safeguards
- 127 Attachment procedure
- 128 Index