Additional remarks. Fagor CNC 8055 para otras aplicaciones, CNC 8055 for lathes, CNC 8055 para fresadoras, CNC 8055 for milling machines, CNC 8055 para tornos, CNC 8055 for other applications

ADDITIONAL REMARKS

Mount the CNC away from coolants, chemical products, blows, etc. which could damage it. Before turning the unit on, verify that the ground connections have been properly made.

To prevent electrical shock at the central unit of the 8055 CNC, use the proper mains AC connector at the power supply module. Use 3-wire power cables (one for ground connection).

CPU

X1

AXES

X2 X1 X2

I/O

X1

X3 X4

CMPCT

FLASH

X5 X6

X2

USB X7 X8

X3

COM1

I N

OUT

NODE

B

CDEF

ETH

X9

X10

X3

FAGOR

To prevent electrical shock at the monitor of the 8055 CNC, use the proper mains AC connector (A) with

3-wire power cables (one of them for ground connection).

(A)

(B)

X1

W1

Before turning on the monitor of the 8055 CNC and verifying that the external AC line (B) fuse of each unit is the right one. See identification label of the unit itself.

In case of a malfunction or failure, disconnect it and call the technical service. Do not get into the inside of the unit.

CNC 8055

CNC 8055i

·23·

CNC 8055

CNC 8055i

·24·