Video Out. Digital Processing Systems DPS-470

ntsc-pal-141.qxd 4/4/00 2:25 PM Page 20

DPS-470 Operator’s Manual

Video Out

Clamp Speed

Y/C Horiz Delay

Y/C Vert Delay

CAV In

CAV Out

• For all outputs, selecting Monochrome places the DPS-470 into ‘Forced

Monochrome’ mode where the chrominance picture detail is suppressed, and a black-and-white image is created. The color burst is still present.

• Normal (default)

• Force Black Out: all outputs are forced to super-black.

Applicable to the COMPOSITE Synchronizer and the CAV input modes.

• Normal (default): the input video clamp is set to a ‘30-line’ time constant.

• Fast: the input video clamp is set to a ‘3-line’ time constant. This mode is used when hum is present on the input video signal.

The control range is from -518 ns to +592 ns, in 74 ns increments. The factory default setting is 0 ns delay. (Does not affect D1 input.)

The control range is from –2 lines to +1 line. The factory default is 0 lines.

(Does not affect D1 input.)

Selects component analog input format.

• Beta In (default)

• MII In (NTSC only)

Selects component analog output format.

• Beta Out (default)

20