Analog I/P Termination. Digital Processing Systems DPS-470

ntsc-pal-141.qxd 4/4/00 2:25 PM Page 27

Chapter 3:

Operation

Analog I/P Termination

Terminates the analog input with a 600-ohm load or sets as high impedance input.

CH1: 600R

HIGHZ

CH2: 600R

HIGHZ

Analog Input Type

This selects whether the analog audio inputs are balanced or unbalanced.

CH1: BAL

UNBAL

CH2: BAL

UNBAL

Stereo Mode CH1

Swaps the left and right outputs of channel 1. The last mode in this menu is the sum of the left and right channel divided by two. For example (L+R)/2..

• Stereo (Default)

• Mono Left

• Mono Right

• Mono Sum

• Stereo Reverse

Stereo Mode CH2

Swaps the left and right outputs of channel 2. The last mode in this menu is the sum of the left and right channel divided by two. For example (L+R)/2.

• Stereo (Default)

• Mono Left

• Mono Right

• Mono Sum

• Stereo Reverse

27