advertisement
LC-37GD6U
LC-32GD6U
LC-26GD6U
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• Some items may be grayed out. They are not selectable.
• The examples used throughout this manual are based on the LC-32GD6U model.
IMPORTANT:
To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the
TV.
Model No.:
Serial No.:
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
2
IMPORTANT INFORMATION
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR
TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS
DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE
RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING
ACCESSORIES RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART
COMBINATION SHOULD BE MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND
UNEVEN SURFACES MAY CAUSE THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections.
DECLARATION OF CONFORMITY
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-37GD6U
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32GD6U
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-26GD6U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www. sharpusa. com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eia.org
advertisement
Related manuals
advertisement
Table of contents
- 2 IMPORTANT INFORMATION
- 4 DEAR SHARP CUSTOMER
- 4 IMPORTANT SAFETY INSTRUCTIONS
- 7 Contents
- 8 Trademarks
- 8 Patent Notice
- 9 Supplied accessories
- 10 Preparation
- 10 Where to place the TV
- 12 Removing speakers
- 13 Removing the stand
- 13 Setting the Display on the wall
- 14 Inserting the batteries
- 14 Using the remote control unit
- 15 Part names
- 17 Remote control unit
- 18 Cable TV/VCR connection
- 20 Outdoor antenna connection
- 21 Turning on the power
- 21 Turning off the power
- 22 Initial setup
- 23 Changing channels Analog-TV
- 24 Changing volume/sound
- 25 Setting MTS/SAP stereo mode
- 26 Connecting Digital Cable Module
- 27 Basic adjustment settings
- 27 AV input mode menu items
- 28 PC input mode menu items
- 28 EZ setup
- 29 Channel setup
- 31 Antenna Setup-DIGITAL
- 32 Favorite channel setting
- 32 Language setting
- 33 Picture adjustments
- 34 OPC setting
- 35 Color temperature
- 35 3D-Y/C
- 36 Monochrome
- 37 Sound adjustment
- 37 Dolby virtual
- 38 Power control
- 38 Power control for AV source
- 38 Power control for PC source
- 39 Digital Setup
- 39 Video Setup
- 41 Using memory card
- 45 Displaying slide show
- 46 My Program
- 46 Audio Select
- 47 Deleting a still image file
- 47 Deleting all still image files
- 48 Recording a motion picture
- 48 Rec. Mode
- 49 Pre Record
- 49 Repeat Play
- 50 Deleting a motion picture file
- 50 Deleting all motion picture files
- 50 Format
- 51 Using external equipment
- 52 Connecting a DVD player
- 53 or camcorder
- 54 Connecting a Digital TV STB
- 55 Connecting HDMI equipment
- 55 equipment
- 56 Connecting a PC
- 57 i.LINK connection
- 58 Setting the recording mode
- 59 Selecting a D-VHS deck (i.LINK)
- 59 a D-VHS deck (i.LINK)
- 60 Controlling an i.LINK device
- 62 with a D-VHS deck (i.LINK)
- 63 Useful adjustment settings
- 63 Moving the picture on the screen
- 64 Connecting external speakers
- 65 Audio Quality Control
- 68 Input label
- 68 Picture Flip
- 69 AV MODE
- 69 View mode for 4:3 Programs
- 70 View mode (for PC input mode)
- 71 Digital Noise Reduction
- 71 Audio only
- 72 Output Select
- 72 Sleep timer
- 73 Title Display Type
- 74 Closed caption
- 75 Font Style
- 76 Foreground Color
- 76 Foreground Opacity
- 76 Background Color
- 77 Background Opacity
- 77 Character Edge
- 78 (AV input mode only)
- 80 Parental control (setting V-CHIP level)
- 84 V-CHIP BLOCK
- 85 Center Channel Input
- 86 Other viewing options
- 86 Viewing information of the program
- 87 Twin picture functions
- 87 Presetting remote control function
- 93 Troubleshooting
- 94 PC compatibility chart
- 95 RS-232C port specifications
- 97 Optional accessory
- 98 Dimensional drawings