advertisement
Part names
* The examples used throughout this manual are based on the LC-32GD6U model.
Display
VOLUME buttons
(VOLl/k )
CHANNEL buttons
(CH s/r)
INPUT button
POWER button
14
Remote control sensor Headphone jack
OPC sensor CARD indicator
POWER indicator OPC indicator
SLEEP indicator
*OPC: Optical Picture Control
(See page 33.)
Part names
Display
LC-37GD6U
LC-32GD6U
INPUT 3 terminals
INPUT 1 terminals
MONITOR OUTPUT terminals
INPUT 2 terminals
LC-26GD6U
MONITOR
OUTPUT terminals
INPUT 3 terminals
INPUT 1 terminals i.LINK terminals
CableCARD slot
DIGITAL IN terminal
INPUT 2 terminals
AC INPUT terminal
EXTERNAL SPEAKER terminals
DIGITAL AUDIO OUTPUT terminal
SYSTEM RESET**
CENTER CHANNEL
INPUT terminal
* This terminal
INPUT 5 terminals looks different on the LC-26GD6U.
INPUT 4 terminal
DC OUTPUT terminal
(Terminal for expanded functionality in the near future.)
RS-232C terminal
RESET*
* Press RESET if the system cannot return to its
original state after performing various operations.
ANALOG A IN terminal
ANALOG A OUT terminal
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• Dolby virtual resets to off
• Image position initializes
** Press SYSTEM RESET if the system does not operate after starting up.
ANALOG B IN terminal
NOTE
• Pressing RESET will not work if the System is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 66 for clearing the secret number when you know it. See page 100 for initializing to the factory preset values when you forget your secret number.
15
advertisement
Related manuals
advertisement