advertisement
Using memory card
Displaying a motion picture
1
Press CARD and the card mode screen displays.
2
Press c/d to select “Video”, and then press
ENTER.
3
Press a/b/c/d to select the file you want to play, and then press ENTER.
• Video playback starts.
4
Press CARD again to display the operation panel.
• See page 42 for the operation panel information.
• When viewing a motion picture, by pressing
VIEW MODE the picture size changes.
Small – Medium – Large.
Recording a motion picture
Use this setting to record images you are currently watching.
Record with the settings made in “Rec. Mode” and
“Pre Record”.
1
Press REC to start recording.
• CARD indicator lights up red.
• Recording information displays in the lower right corner of the screen.
2
Press
H to stop recording.
Rec. Mode
Use this setting for recording images you are currently watching. You can select the recording mode (picture quality) for a motion picture.
1
2
Press CARD and the card mode screen displays.
Press MENU and the MENU screen displays.
3
Press c/d to select “Card Setup”.
NOTE
The list of broadcasting type or input signal not available for recording:
1 COMPONENT input
2 HDMI input
3 DVI-I input
4 Card picture
5 Copy guarded signal
6 V-chip blocked program
7 i.LINK input
8 DTV Program
To display the remaining record time.
Press DISPLAY while not recording.
• Remaining record time displays in the lower right corner of the screen.
NOTE
• Do not remove the AC cord from the socket.
• Recording stops if you press TV POWER on the remote control while recording.
• When card has no capacity for recording, “Card is full” displays and stops recording.
• You cannot change the channel or switch the input source while recording.
4
Press a/b to select “Video Setup” and then press ENTER.
5
6
Press a/b to select “Rec. Mode”, and then press ENTER.
Rec. Mode
Pre Record
Repeat Play
File Operation
SP
LP
EP
Press a/b to select the desired mode, and then press ENTER.
47
advertisement
Related manuals
advertisement