Enable RSS
Expanded
Disable
UCC/EAN 128
Emulation
Enable
UCC/EAN 128
Emulation
END
5-26
Symbologies
RSS Expanded
The following options apply to the RSS Expanded symbology.
Disable/Enable RSS Expanded
When this feature is disabled, the scanner will not read RSS Expanded bar codes.
UCC/EAN 128 Emulation
When enabled, RSS Expanded bar codes will be translated to the UCC/
EAN 128 label data format.
START
STATE
Disable
RSS Expanded
BAR CODE
PowerScan® 7000 SRI
RSS Expanded
Length Control
Fixed Length Decoding —
When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding —
When variable length decoding is enabled, the scanner will decode a bar code if the label length falls in the range of the configurable minimum and maximum length.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the
RSS
Expanded Length 1, Length 2 Programming Instructions
below.
5. Set Length 2 to the second fixed length (or to ‘000’ if there is only one fixed length) by following the
RSS Expanded Length 1, Length
2 Programming Instructions
below.
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the minimum length by following the
RSS
Expanded Length 1, Length 2 Programming Instructions
below.
5. Set Length 2 to the maximum length by following the
RSS
Expanded Length 1, Length 2 Programming Instructions
below.
User Manual 5-27
Symbologies
START
MODE
Variable
Length
Decoding
BAR CODE
Fixed Length
Decoding
END
5-28 PowerScan® 7000 SRI
RSS Expanded
RSS Expanded Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad
and scan the three digits
(zero padded) representing the length in decimal notation.
For RSS Expanded bar codes, only the data characters are included in the length calculations.
NOTE
4. Scan the END bar code.
START
SETTING BAR CODE
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 001
Set Length 2
DEFAULT SETTING FOR THIS FEATURE:
074 decimal
END
User Manual 5-29
Symbologies
Minimum Reads
This feature specifies the minimum number of consecutive times an RSS
Expanded label must be decoded before it is accepted as good read.
START
READS
Minimum =
1 Read
BAR CODE
Minimum =
2 Reads
Minimum =
3 Reads
Minimum =
4 Reads
END
5-30 PowerScan® 7000 SRI
RSS Expanded
RSS Expanded 2D Component
This feature controls the requirement that a 2D label component be decoded when an RSS Expanded base label is decoded.
• Enable — Requires that a 2D label component be decoded when an RSS Expanded base label is decoded.
• Disable — Does NOT require a 2D label component to be decoded when an RSS Expanded base label is decoded.
START/END
STATE
Disable
RSS Expanded
2D Component
BAR CODE
Enable RSS
Expanded 2D
Component
User Manual 5-31
