Code 39. Psion Teklogix PowerScan 7000

Below you will find brief information for Linear Imager PowerScan 7000. The PowerScan 7000 SRI (Standard Range Imager) is a handheld scanner that delivers aggressive read rates and depths of field on 1D and stacked codes. It is designed for today’s demanding commercial and industrial environments and offers superior image quality, speed, durability, and the ability to read poor quality bar codes. The scanner is comfortable to hold, easy to use, rugged, and excellent for the most demanding applications.

PDF

Document

Code 39

The following options apply to the Code 39 symbology.

Disable/Enable Code 39

When this feature is disabled, the scanner will not read Code 39 bar codes.

Check Character Calculation

When enabled, the scanner will calculate the check character of the labels. Turn this option on only when a checksum is present in the Code

39 labels.

Check Character Transmit

Enable this option to transmit the check character with scanned bar code data.

Start/Stop Characters

Enables/disables transmission of Code39 start and stop characters.

Code 39 Full ASCII

Enables/disables the translation of Code 39 characters to Code 39 full-

ASCII characters

User Manual 5-35

Symbologies

Code 39 — continued

START

STATE BAR CODE

Disable

Code 39

Enable

Code 39

Disable

Check Char

Calculation

Enable

Check Char

Calculation

Disable

Check Char

Transmission

Enable

Check Char

Transmission

5-36 PowerScan® 7000 SRI

Code 39 — continued

START

STATE

Don’t Transmit

Start/Stop

Characters

BAR CODE

Transmit

Start/Stop

Characters

Disable

Code 39 Full

ASCII

Enable

Code 39 Full

ASCII

END

Code 39

User Manual 5-37

Symbologies

Code 39 — continued

Length Control

Fixed Length Decoding —

When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.

Variable Length Decoding —

When variable length decoding is enabled, the scanner will decode a bar code if the label length falls in the range of the configurable minimum and maximum length.

Configuring Fixed Length Decoding:

1. Scan the START bar code.

2. Scan the Fixed Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the first fixed length by following the

Code 39

Length 1, Length 2 Programming Instructions

below.

5. Set Length 2 to the second fixed length (or to ‘000’ if there is only one fixed length) by following the

Code 39 Length 1, Length 2 Programming Instructions

below.

Configuring Variable Length Decoding:

1. Scan the START bar code.

2. Scan the Variable Length Decoding bar code.

3. Scan the END bar code.

4. Set Length 1 to the minimum length by following the

Code 39

Length 1, Length 2 Programming Instructions

below.

5. Set Length 2 to the maximum length by following the

Code 39

Length 1, Length 2 Programming Instructions

below.

5-38 PowerScan® 7000 SRI

Code 39 — continued

START

MODE

Variable

Length

Decoding

BAR CODE

Fixed Length

Decoding

END

Code 39

User Manual 5-39

Symbologies

Code 39 Length 1, Length 2 Programming

Instructions

1. Scan the START bar code.

2. Scan either the Set Length 1 or Set Length 2 bar code.

3. Turn to

Appendix C, Alpha-Numeric Pad

and scan the three digits

(zero padded) representing the length in decimal notation.

For Code 39 bar codes, all check, data and full ASCII shift characters are included in the length calculations.

Start/Stop characters are not included.

NOTE

4. Scan the END bar code.

SETTING BAR CODE

Set Length 1

DEFAULT SETTING FOR THIS FEATURE: 003

Set Length 2

DEFAULT SETTING FOR THIS FEATURE:

050 decimal

END

5-40 PowerScan® 7000 SRI

Code 39

Code 39 — continued

Quiet Zones

This feature enables/disables the requirement that quiet zones must be present for Code 39 bar codes.

START

STATE

Don’t require

Quiet Zones

BAR CODE

Require Quiet

Zones

END

User Manual 5-41

Symbologies

Code 39 — continued

Code 39 Stitching

Enables/disables stitching for Code 39 labels. When parts of a Code 39 bar code are presented to the scanner with this feature enabled, the bar code parts will be assembled by the scanner’s software, and the data will be decoded if all bar code proofing requirements are met.

START

STATE

Disable

Code 39

Stitching

BAR CODE

Enable

Code 39

Stitching

END

5-42 PowerScan® 7000 SRI

Code 39

Code 39 — continued

Minimum Reads

This feature specifies the minimum number of consecutive times an

Code 39 label must be decoded before it is accepted as good read.

START

READS

Minimum =

1 Read

BAR CODE

Minimum =

2 Reads

Minimum =

3 Reads

Minimum =

4 Reads

END

User Manual 5-43

Key features

Aggressive read rates
Superior image quality
Speed and durability
Read poor quality bar codes
Comfortable to hold
Easy to use
Rugged design

Frequently asked questions

The scanner can be connected via RS-232 serial, USB, Wand Emulation, IBM, or Keyboard Wedge. The correct interface cable is included for the scanner interface type you ordered.

The scanner is typically factory-configured. You can customize the scanner through use of the instructions and programming bar codes available in the manual.

The scanner is factory programmed for the most common terminal and communications settings. You can reset the scanner to its factory configuration by scanning the Standard Product Default Settings bar code from the manual.

This feature sets a time limit that determines how much time must pass before reading the same label again (e.g. two identical items in succession).

This feature disables or enables the indication (from the Beeper) that the scanner is receiving power.

This setting determines the amount of time the scanner continues to scan in triggerless or stand mode once scanning has been activated.

The Laser Pointer is a value-added option that can be activated or deactivated through the manual. When the trigger is pressed and Scan Mode is set to Single, the laser pointer will be activated for the time period configured by this feature.