- No category
advertisement
25-PIN CABLE ELECTRICAL CONNECTIONS
5
DS4800
USER INTERFACE
Vext 30 Vdc max.
C
8/11
O+
22/12
O-
E
Figure 68 - Open Collector Output Connections
V
CE
max = 30 Vdc
I max = 40 mA continuous; 130 mA pulsed
5.7 USER INTERFACE - HOST
The following table contains the pinout for standard RS232 PC Host interface. For other user interface types please refer to their own manual.
RS232 PC-side connections
1 5
1 13
6 9
9-pin male connector
14 25
25-pin male connector
Pin Name Pin Name
2 RX 3 RX
3 TX 2 TX
5 GND 7 GND
7 RTS 4 RTS
8 CTS 5 CTS
How To Build A Simple Interface Test Cable:
The following wiring diagram shows a simple test cable including power, external (pushbutton) trigger and PC RS232 COM port connections.
25-pin D-sub male 9-pin D-sub female
DS4800
21
TX
20
RX
7
GND
13 Vdc
25
GND
2
3
5
RX
TX
GND
PC
13 Vdc
18
I1A
19
I1B
Power Supply
Vdc (10 – 30 Vdc)
Power GND
Trigger
Test Cable for DS4800
75
advertisement
Related manuals
advertisement
Table of contents
- 13 RAPID CONFIGURATION
- 13 Step 1 – Connect the System
- 16 Step 2 – Mount and Position the Scanner
- 17 Step 3 – Focus the Scanner
- 18 Step 4 – X-PRESS™ Configuration
- 22 Step 5 – Install Genius™ Configuration Program
- 27 Step 6 – Test Mode
- 28 Advanced Scanner Configuration
- 30 INTRODUCTION
- 30 Product Description
- 31 Indicators
- 31 ID-NET
- 33 How To Setup/Configure the Scanner Network
- 34 X-PRESS™ Human Machine Interface
- 34 Diagnostic Indication
- 35 X-PRESS™ Functions
- 37 Display
- 38 Display Messages
- 41 Oscillating Mirror Models
- 42 Subzero Temperature Models
- 43 Model Description
- 43 Accessories
- 44 INSTALLATION
- 44 Package Contents
- 45 Mechanical Installation
- 48 Mounting DS
- 51 Positioning
- 53 CBX ELECTRICAL CONNECTIONS
- 54 Power Supply
- 54 Main Serial Interface
- 55 RS232 Interface
- 56 RS485 Full-Duplex Interface
- 57 RS485 Half-Duplex Interface
- 59 ID-NET™ Interface
- 59 ID-NET™ Cables
- 60 ID-NET™ Response Time
- 64 ID-NET™ Network Termination
- 64 Auxiliary RS232 Interface
- 65 Inputs
- 68 Code Verifier
- 68 Outputs
- 70 User Interface - Host
- 71 25-PIN CABLE ELECTRICAL CONNECTIONS
- 72 Power Supply
- 72 Main Serial Interface
- 73 RS232 Interface
- 74 RS485 Full-Duplex Interface
- 75 RS485 Half-Duplex Interface
- 77 ID-NET™ Interface
- 77 ID-NET™ Cables
- 78 ID-NET™ Response Time
- 82 ID-NET™ Network Termination
- 82 Auxiliary RS232 Interface
- 83 Inputs
- 86 Code Verifier
- 86 Outputs
- 87 User Interface - Host
- 88 TYPICAL LAYOUTS
- 88 Point-to-Point
- 90 Pass-Through
- 92 ID-NET
- 95 RS232 Master/Slave
- 96 Multiplexer Layout
- 97 READING FEATURES
- 97 Advanced Code Reconstruction (ACR™ 4)
- 98 Tilt Angle for Advanced Code Reconstruction
- 99 Advanced Code Reconstruction Reading Conditions
- 101 Linear Code Reading
- 101 Step-Ladder Mode
- 102 Picket-Fence Mode
- 103 Performance
- 104 Reading Diagrams
- 104 X0XX Standard Models
- 107 X1XX Oscillating Mirror Models
- 110 XXX5 Subzero Models
- 113 MAINTENANCE
- 113 Cleaning
- 114 TROUBLESHOOTING
- 114 General Guidelines
- 117 TECHNICAL FEATURES
- 119 GLOSSARY
- 122 INDEX