HiCommand® Device Manager Error Codes

Error Messages from the Hitachi

Storage Command Suite Common

Component

This chapter lists and describes the error messages output by the Hitachi

Storage Command Suite Common Component:



Error Messages Output by Hitachi Storage Command Suite Common

Component

Error Messages from the Hitachi Storage Command Suite Common Component

Hitachi Device Manager Error Codes

8-1

Error Messages Output by Hitachi Storage Command Suite

Common Component

This chapter lists and describes the error messages output by the Hitachi

Storage Command Suite Common Component. An error message from the

Hitachi Storage Command Suite Common Component consists of a message

ID and the error message text. The format is as follows:



Format:

KAPMmmmmm-z message-text (see Table 8-1)

KDJEmmmmm-z message-text (see Table 8-2)

KEHGmmmmm-z message-text (see Table 8-3)

mmmmm is a message number, and z is one of the following message levels:

–

I: Information

–

W: Warning

–

E: Error



Output destination:

– Output level 0

The error message is output to syslog or the event log, integrated trace, and original log trace.

–

Output level 10

The error message is output to the original log trace.

Some of the error messages might be output to the integrated log trace for UNIX.

Table 8-1, Table 8-2, and Table 8-3 list the Hitachi Storage Command Suite

Common Component error messages, and provide recommended actions for resolving the error conditions. If the problem cannot be resolved, collect maintenance information, and then contact the Hitachi Data Systems Support

Center (see Calling the Hitachi Data Systems Support Center for contact

information).

8-2 Error Messages from the Hitachi Storage Command Suite Common Component


Table 8-1 Hitachi Storage Command Suite Common Component

Messages (KAPM)

Error Code Error Message

KAPM00001-E

KAPM00002-E

ID=aa...aa,LogTraceLibrary error. Trace

START failed. bb...bb

aa...aa: ID of the program using the log

bb...bb: Error message output by the log trace library when the system failed to start the trace

Output destinations: syslog/Eventlog

ID=aa...aa,LogtraceLibrary error. Trace

STOP failed. bb...bb


bb...bb: Error message output by the log trace library when the system failed to stop the trace


KAPM00003-W ID=aa...aa,Trace output error.



KAPM00004-W

ID=aa...aa,Integrated trace output error.



KAPM00005-E File I/O failed.(filename=aa...aa).

aa...aa: Name of the version file


KAPM00006-E ID=aa...aa,Invalid eventlog source.

Eventlog's config not found in the registry(source name="HiCommand

Log")



KAPM00011-E ID=aa...aa,Versionfile name is null.



Description and Action

An attempt to start the log trace has failed.

Collect maintenance information and contact the Support Center.

An attempt to start the log trace has failed.


An attempt to output the log trace has failed.

Check whether the log file is read only.

An attempt to output an integrated log trace has failed.

Check whether the Hitachi Network

Objectplaza Trace Monitor 2 service is running.

An attempt to create a version file has failed.

Check whether the version file specified for aa...aa can be written.

The registry for Eventlog was not found.


KAPM00012-E ID=aa...aa,PP version is null.



KAPM00013-E ID=aa...aa,Trace log file name is null.



The version file name has not been specified.


The version of each PP has not been specified.


The name of the individual log trace has not been specified.




8-3


KAPM00014-E ID=aa...aa,Class name is null.



KAPM00015-E ID=aa...aa,Kind of Event is null.



KAPM00016-E ID=aa...aa,Message-ID is null.



KAPM00017-E

KAPM00018-E

KAPM00019-E

KAPM00020-E

KAPM00021-E

KAPM00022-E

aa...aa

aa...aa: NullPointerException message


aa...aa

aa...aa: Exception message



The class name of the program to be used to output the log has not been specified.


The value that indicates the type of message event for output has not been specified.


The message ID for the message to be output has not been specified.


A NullPointerException occurred in

LogTraceManager.


An unexpected exception occurred in

LogTraceManager.


The ID (bb...bb) length attached to

Eventlog is too long.


ID=aa...aa,SyslogID size error:idEnt=bb...bb


bb...bb: Eventlog ID


ID=aa...aa,Invalid version length:version=bb...bb


bb...bb: Version character string


ID=aa...aa,Invalid log file number:logNum=bb...bb


bb...bb: Number of individual log trace files


ID=aa...aa,Invalid log file size:logSize=bb...bb


bb...bb: File size of the individual log trace


The version character string is too long.


The number of individual log trace files is invalid.


The size of an individual log trace file is invalid.




Error Code

KAPM00023-E

KAPM00024-E

KAPM00025-E

KAPM00090-I

KAPM00091-E

KAPM00092-I

KAPM00102-E

KAPM00103-E

KAPM00104-E

KAPM00105-E

Error Message

ID=aa...aa,Invalid message type:kind=bb...bb


bb...bb: Message type


ID=aa...aa,Invalid output level:level=bb...bb


bb...bb: Output level


The value of the encoding setting

bb...bb of the unique log output of

aa...aa is invalid.

aa...aa: Program name request to output log

bb...bb: Encoding


The SSO server started successfully.


An attempt to start the SSO server has failed.


The SSO server was stopped successfully.



A value indicating the message type is invalid.


An invalid log output level exists in the code.


The value of the encoding setting bb...bb of the unique log output of aa...aa is invalid.






Output destinations: Destinations for output level 10, and windows.

An error occurred during DBMS access processing.

Output destinations: Destinations for output level 10.

The DBMS is not running.


The product name is not specified.


An unexpected value was returned from the integrated authentication server.

(aa...aa)

aa...aa: Unexpected return value


An authentication error occurred.


An error occurred during DBMS access processing.



Make sure the DBMS has started.



An unexpected value was returned from the integrated authentication server.




8-5

Error Code

KAPM00106-E

KAPM00107-E

KAPM00108-E

KAPM00110-E

KAPM00111-I

KAPM00112-I

KAPM00113-I

KAPM00114-I

KAPM00115-E

KAPM00116-E

KAPM00117-E

Error Message

An attempt to update the authentication data has failed.


An attempt to delete the authentication data has failed.


An attempt to print the authentication data has failed.



An attempt to update the authentication data has failed.


An attempt to delete the authentication data has failed.

Retry execution. If the problem cannot be solved, collect maintenance information and contact the Support

Center.

An attempt to print the authentication data has failed.


Center.

The HSSOContext value is invalid.


The authentication data was successfully updated.

The HSSOContext value is invalid.


The authentication data was successfully updated.


The authentication data was successfully deleted. (aa...aa)

aa...aa: Product name


The authentication data is already deleted. (aa...aa)



The authentication data was successfully displayed.


An attempt to communicate with the

SSO server has failed.


An attempt to update authentication data has failed.


The RD area of HBase is blocked.


The authentication data was successfully deleted.

The authentication data is already deleted.

The authentication data was successfully displayed.

An attempt to communicate with the SSO server has failed.


This message is displayed when an attempt to update authentication data fails.

Please restart the Single Sign On server.


Remove the cause of the HiRDB blockage, and then try again.



Error Code

KAPM00119-E

KAPM00130-E

KAPM00131-E

KAPM00132-E

KAPM00133-E

KAPM00134-E

KAPM00138-E

KAPM00139-I

KAPM00140-I

KAPM00141-E

KAPM00145-E

Error Message

Deletion of the license event data has failed.


There is no value in the request.


A required token is not specified.


The event name is invalid.




An error occurred during a DBMS access.



Deletion of the license event data has failed.

Make sure the DBMS has started, and then retry the operation. If you cannot solve the problem, collect the maintenance information, and then contact the Support Center.

There is no value in the request.


A required token is not specified.


The event name is invalid.




An error occurred during a DBMS access.



Authentication data for delete processing is invalid.


Deletion of authentication data for all products will now start.


Deletion of authentication data will now start.

Application name: aa...aa

Service name: bb...bb

aa...aa: Application name

bb...bb: Service name


An attempt to lock the table has failed.






Authentication data for delete processing is invalid.


Deletion of authentication data for all products will now start.

Deletion of authentication data will now start.







8-7

Error Code

KAPM00162-E

KAPM00163-E

KAPM00192-E

KAPM00199-E

KAPM00203-E

KAPM00204-E

KAPM00205-E

KAPM00206-E

Error Message

There is an error in the protocol.

(element = aa...aa)

aa...aa: Element



(element = aa...aa, attribute = bb...bb, value = cc...cc)

aa...aa: Element

bb...bb: Attribute

cc...cc: Value


An exception was detected.


aa...aa

aa...aa: Name of the exception object and the reason that object was thrown, or the backtrace for that object






An error occurred during access to the

DBMS.


The specified event data has already been registered. (application type =

aa...aa, event type = bb...bb, event code = cc...cc)

aa...aa: Application type

bb...bb: Event type

cc...cc: Event code







An exception was detected.


Detailed information for KAPMxxxxx-E.

This indicates the thrown exception object and the backtrace for that object.

See the message KAPMxxxxx-E.





An error occurred during access to the

DBMS.

Collect maintenance information, and then contact the Support Center.

The specified event data has already been registered.




Error Code

KAPM00207-E

KAPM00208-E

KAPM00210-E

KAPM00211-E

KAPM00212-E

KAPM00213-E

Error Message

Event data cannot be updated because no event data exists. (application type =

aa...aa, event type = bb...bb, event code = cc...cc)





Communication with the SSO server has failed.



A program type specified for

TNB_SoftwareFeature is not registered.

(application type = aa...aa)



Associated data does not exist.

(application type = aa...aa)



An event management object cannot be deleted because the specified parameter is invalid. (application type = aa...aa, event type = bb...bb, event code =

cc...cc)





The value registered in the database is invalid. (application type = aa...aa, event type = bb...bb, event code =

cc...cc)






Event data cannot be updated because no event data exists.


Communication with the SSO server has failed.

Make sure the following have started: the

HBase Storage Mgmt Common Service or

HBase Storage Mgmt Web Service, and the database.

Authentication has failed.


A program type specified for

TNB_SoftwareFeature is not registered.


Associated data does not exist.


An event management object cannot be deleted because the specified parameter is invalid.


The value registered in the database is invalid.




8-9

8-10


KAPM00214-E

KAPM00215-E

The same information is already registered in the database. (application type = aa...aa, event type = bb...bb, event code = cc...cc)





An attribute value is invalid. (attribute =

aa...aa)

aa...aa: Attribute


KAPM00216-W The attribute length exceeds the maximum limit. (attribute = aa...aa, value = bb...bb, maximum limit =

cc...cc)

aa...aa: Attribute

bb...bb: Value

cc...cc: Maximum limit


KAPM00217-E An invalid parameter is specified.


KAPM00252-E

KAPM00253-E

The license information file does not exist. (license information file = aa...aa)

aa...aa: License information file


The license information file might be corrupted. (license information file =

aa...aa)



KAPM00254-E

KAPM00255-E

An attempt to read the license information file has failed. (license information file = aa...aa)



The license information file cannot be accessed. (license information file =

aa...aa) aa...aa: License information file



The same information is already registered in the database.


An attribute value is invalid.


The attribute length exceeds the maximum limit.


An invalid parameter is specified.


The license information file does not exist.


The license information file might be corrupted.


An attempt to read the license information file has failed.


The license information file cannot be accessed.




Error Code

KAPM00900-I

KAPM00901-E

KAPM00902-I

KAPM01001-I

KAPM01002-E

KAPM01003-E

KAPM01004-E

Error Message







Initializing HssoServer configuration.


The system property indicated by hcmds.home

could not be found.


HssoServerRes1_0.dtd was not found. path = aa...aa

aa...aa: Path of file

HssoServerRes1_0.dtd


Can't read DTD files.


KAPM01005-W Failed to close FileStream.






Servlet initialization has started.

The system property indicated by hcmds.home

could not be found.


HssoServerRes1_0.dtd

was not found.


An attempt to read the DTD file has failed.


An attempt to close FileStream has failed.

The IP address of the requesting client.

KAPM01010-E

aa...aa: IP address


Can't get InputStream from Request.


KAPM01013-E

KAPM01017-E

KAPM01019-E

Unsupported command was requested.


Unsupported method was requested.


Unsupported method was requested.


An attempt to acquire an InputStream from a client's request has failed.


The requested command name is invalid.


The requested method name is invalid.


The requested method name is invalid.




8-11

8-12

Error Code

KAPM01024-I

KAPM01025-E

KAPM01026-E

KAPM01028-E

KAPM01034-E

KAPM01036-E

KAPM01040-E

KAPM01042-E

KAPM01046-E

KAPM01051-E

Error Message

Request Information: Version = aa...aa,

Command = bb...bb, ID = cc...cc

aa...aa: Version

bb...bb: Command

cc...cc: ID


A fatal error occurred.


An attempt to initialize the HSSO Server configuration has failed.


The file "aa...aa" could not be read. Path

= bb...bb

aa...aa: File name

bb...bb: File path name


Can't get the required information from request. Request is invalid.


Request XML can't parse to DOM. -

aa...aa



XML version aa...aa for HssoClient is not supported.

aa...aa: Request version


An attempt to parse the request has failed.


The format of the request was invalid.

Cause = aa...aa

aa...aa: Cause


The creation of HSSOContext for authentication has failed. aa...aa




The request information will be displayed.



An attempt to initialize the HSSO server configuration has failed.


The file "aa...aa" could not be read.

Check the specified file path and the permission for reading the specified file.

The request format is invalid (analysis was successful).


The format of the request is invalid.


The version of the specified request is not supported.


An attempt to parse the request has failed.


The format of the request was invalid.


An attempt to create HSSOContext has failed.




Error Code

KAPM01052-I

KAPM01055-E

KAPM01056-E

KAPM01057-E

KAPM01059-E

KAPM01061-E

Error Message

aa...aa accessed.

aa...aa: User ID



Indicates the ID of the accessing user.


The system property specified in hcmds.home cannot be found.


HDVM.user not found at hcmds.home.


HDVM.password not found at hcmds.home.


The specified HSSO session is invalid, or does not exist. Session ID = aa...aa

aa...aa: Session ID


An invalid value is set in the configuration file. Parameter = aa...aa

aa...aa: Parameter name


An attempt at client authentication has failed.


The system property specified in hcmds.home

cannot be found.


HDVM.user

not found at hcmds.home

.


HDVM.password

not found at hcmds.home


.

The specified HSSO session is invalid, or does not exist.

Log in again.

An invalid value is set in the configuration file.

Check the value of the parameter specified for aa...aa in the configuration file.

Windows : Hitachi-Storage-Command-

Suite-Common-Component-installationfolder

\conf\user.conf

Solaris SPARC :

/opt/HiCommand/Base/conf/user.conf

Solaris10(x64) or Linux : Hitachi-

Storage-Command-Suite-Common-

Component-installation-

folder/Base/conf/user.conf



8-13

Error Code

KAPM01062-E

KAPM01063-I

KAPM01065-E

KAPM01066-E

KAPM01067-E

KAPM01068-E

KAPM01073-E

Error Message

A parameter is not set in the configuration file. Parameter = aa...aa




A parameter is not set in the configuration file.

Check the value of the parameter specified for aa...aa in the configuration file.



\conf\user.conf

Solaris SPARC :






The set virtual host name will now be displayed.

HSSO configuration: Virtual Host Name

= aa...aa

aa...aa: Virtual host name


Can't create DOM tree. - aa...aa



A CIM Repository exception occurred.


The status of the response from Device

Manager was FAILED.


aa...aa

aa...aa: Information that is included in the response of HiCommand Device

Manager


The format of the response from Device

Manager was invalid.


An attempt to create a DOM tree from the client request has failed.



When using HiCommand V3.x series, confirm that the InterBase or the

InterClient service is running. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.

When using the HiCommand V4.x series or later, make sure that HiRDB is running. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.

The status of the response from Device

Manager was FAILED. See the following message KAPM01068-E for the cause.


aa...aa: Information that is included in the response of Device Manager.


The format of the response from Device

Manager was invalid.




Error Code

KAPM01081-E

KAPM01084-I

KAPM01088-E

KAPM01089-E

KAPM01090-E

Error Message Description and Action

Authentication has failed. User ID =

aa...aa

aa...aa: User ID


The HSSO session has started. Session

ID = aa...aa



An attempt to load the class failed. Class

= aa...aa

aa...aa: Class name


An attempt to create the instance of the class for authentication failed. Class =

aa...aa



An attempt to create the instance of the class for authorization failed. Class =

aa...aa




Log in again using a valid user ID and password.

The HSSO session has started.

An attempt to load the class failed.

Confirm that the class specified for

aa...aa is the class specified in

HSSO.classpath

.



\conf\user.conf

Solaris SPARC :






An attempt to create the instance of the class for authentication failed.

Check the value of

HSSO.authentication.module

in the configuration file.



\conf\user.conf

Solaris SPARC :






An attempt to create the instance of the class for authorization failed.

Check the value of

HSSO.authorization.module




\conf\user.conf

Solaris SPARC :








8-15

Error Code

KAPM01091-E

KAPM01092-E

KAPM01093-I

KAPM01094-I

KAPM01095-E

KAPM01096-E

KAPM01097-E

KAPM01098-E

Error Message

An attempt to initialize the authentication class failed. Class =

aa...aa



An attempt to initialize the authorization class failed. Class = aa...aa



HSSO configuration: Authentication class = aa...aa



HSSO configuration: Authorization class

= aa...aa



The authenticated user does not have permission. User ID = aa...aa,

Application = bb...bb

aa...aa: User ID

bb...bb: Application


An attempt to authenticate the internal user has failed.


An exception occurred during internal authentication module processing.


An exception occurred during authentication module processing.



An attempt to initialize the authentication class failed.

Take action according to the proceeding message.

An attempt to initialize the authorization class failed.


The authentication class that HSSO uses will now be displayed.

The authorization class that HSSO uses will now be displayed.

The authenticated user does not have permission.

Log in again as a user having the permission.

An attempt to authenticate the internal user has failed.

Confirm that the user specified by the value of

HDVM.user

and

HDVM.password

the following configuration file is registered in Device Manager.

in



\conf\user.conf

Solaris or Linux :


An exception occurred during internal authentication module processing.


An exception occurred during authentication module processing.




Error Code

KAPM01099-E

KAPM01103-I

KAPM01104-I

KAPM01105-E

KAPM01106-E

KAPM01107-E

KAPM01108-E

KAPM01109-E

KAPM01114-E

Error Message

An exception occurred during authorization module processing.


HSSO configuration: Device Manager

Server URL = aa...aa

aa...aa: Device Manager server URL


HSSO configuration: Device Manager

Server Connection Timeout = aa...aa

aa...aa: Device Manager server connection timeout


The JP1 token is invalid.


An attempt to communicate with

JP1/Base has failed.


An error occurred due to a virtual host name. Function Code = aa...aa, Result

Code = bb...bb

aa...aa: Function code

bb...bb: Result code



An exception occurred during authorization module processing.


The URL of the Device Manager server that HSSO uses will now be displayed.

The timeout value for the connection with the Device Manager server that

HSSO uses will now be displayed.

The JP1 token is invalid.

Log in again.

An attempt to communicate with

JP1/Base has failed.

Check the status of JP1/Base.

An attempt to load the library associated with JP1/Base has failed.


An exception occurred during JP1 token authentication processing. Function

Code = aa...aa, Result Code = bb...bb

aa...aa: Function code

bb...bb: Result code


An attempt to acquire the link and launch information failed.


An error occurred due to a virtual host name.

Check the value of hbase.virtualhost

the configuration file.

in



\conf\user.conf

Solaris or Linux :


An attempt to load the associated with

JP1/Base library has failed.


An exception occurred during JP1 token authentication processing.






8-17

8-18


KAPM01115-E

KAPM01116-E

KAPM01119-E

KAPM01123-I

KAPM01124-I

KAPM01125-E

KAPM01152-E

Exception in DeviceManager.

DeviceManager returns FAILED. -

aa...aa

aa...aa: Error message acquired from

Device Manager


No user was returned from

DeviceManager.


No user information is set in the HSSO session.


HSSO configuration: HSSO Session

Timeout = aa...aa

aa...aa: HSSO session timeout


The login process has completed properly.


The login process has failed.


Can't get the application name from request. Request is invalid.


KAPM01154-W aa...aa is not registered.



KAPM01156-E

KAPM01167-I

KAPM01168-E

Exception in Repository. - aa...aa

aa...aa: Message


The database has stopped.




KAPM01205-E No instance of Service associated with

ServiceAccessPoint.



The response status of Device Manager is

"

FAILED

".


The GetUser response does not contain any user information.


No user information is set in the HSSO session.

Log in again.

The timeout value (in seconds) of the

HSSO session will now be displayed.

This audit log data indicates that login was successful.

This audit log data indicates that login failed.

The application name cannot be acquired from the request. The request is invalid.


aa...aa is not registered.

An error occurred when the Common

Repository was accessed.

See the message KAPM02xxx-E.

The database has stopped.



An attempt to acquire the service associated with ServiceAccessPoint has failed.




Error Code

KAPM01206-E

Error Message

No instance of SoftwareFeature associated with Service.


KAPM01208-E Exception in Repository. - aa...aa

aa...aa: Details about the repository access error


KAPM01209-W ServiceAccessPoint is not registered.


KAPM01220-E Communication with the external authentication server has failed.



An attempt to acquire the

SoftwareFeature associated with the

Service has failed.


An error occurred in the access to the repository.


ServiceAccessPoint is not registered.

Communication with the external authentication server has failed.

Perform one of the following procedures:

For LDAP:

1. By using the host, port, and protocol set in exauth.properties, check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.

2. By using the hcmdsldapuser command, check that the information for the server names specified in the auth.server.name attribute in exauth.properties is registered.

3. If StartTLS is used, check the SSL settings.

4. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.

For RADIUS:


2. By using the hcmdsradiussecret command, check that the information for the server names specified in the auth.server.name attribute in exauth.properties is registered.




8-19

Error Code Error Message Description and Action

KAPM01255-E

KAPM01302-E

KAPM01308-E

KAPM01309-E

KAPM01312-E

KAPM01314-E

1. Make sure that the realm name and

KDC specified in exauth.properties are correct.

2. Make sure that the network is connected correctly.

3. Make sure that Kerberos is compatible with the external authentication server.


The response status of Device Manager is

"

FAILED

".


Exception in DeviceManager.

DeviceManager returns FAILED. -

aa...aa

aa...aa: Error message acquired from

Device Manager


Can't get the host name or port number of DeviceManager from configuration.


An attempt to communicate with Device

Manager failed. URL = aa...aa

aa...aa: URL


The host name or port number of Device

Manager cannot be acquired from the configuration.

Confirm that the value of the properties

HDVM.host

and

HDVM.port

are set in init.conf

.

An attempt to communicate with Device

Manager failed.

Check the status of Device Manager, and check the values of

HDVM.protocol,

HDVM.host

and

HDVM.port




\conf\user.conf

Solaris or Linux :


Device Manager server XML API version

aa...aa is not supported.


The Device Manager Server XML API version aa...aa is not supported.

aa...aa: Version


DeviceManager Server version aa...aa is not supported.

aa...aa: Version of Device Manager


The connection to Device Manager timed out.


Device Manager server version aa...aa is not supported.


The connection to Device Manager timed out.

Confirm that Device Manager is running.



Error Code

KAPM01331-I

KAPM01336-E

KAPM01337-E

Error Message

Connecting to DeviceManager Server specified by aa...aa

aa...aa: URL of Device Manager


URL aa...aa is invalid to DeviceManager

Server.

aa...aa: URL of Device Manager


Authentication Failed in DeviceManager.


KAPM01338-E I/O Error regarding connection to

DeviceManager.


KAPM01353-E Can aa...aa.

aa...aa: User permissions



The connection to Device Manager is being established.

The format of the URL aa...aa for Device

Manager server is invalid.

Confirm that the values of the and

HDVM.host

HDVM.port

properties are valid in init.conf

.

An authentication error occurred in

Device Manager.

Confirm that the specified user was registered in Device Manager.

An I/O Error occurred in the communication with Device Manager.

Confirm that Device Manager is running.

User permissions could not be mapped.


CIMClient creation is starting.

KAPM01402-E

KAPM02001-E


Can't create CIMClient. - aa...aa



Can not be found database.


An attempt to create CIMClient has failed.


KAPM02001-W

Some of connection updated the same instance together. So didn't update the instance.


The database could not be found.

Check the value of

DATABASE.path

in the following file.



\conf\user.conf

Solaris or Linux :


Some of connection updated the same instance together. So didn't update the instance.

Confirm that the candidate for updating was updated. If it was not updated, try again.



8-21

Error Code

KAPM02002-E

KAPM02003-E

KAPM02004-E

KAPM02005-E

KAPM02006-E

KAPM02007-E

KAPM02008-E

KAPM02009-E

Error Message

Your user name and password are not defined.


An unknown host exception occurred while trying to open a socket connection to server.


No suitable driver.



The name or password of the user accessing the database is invalid.

Check the value of

DATABASE.user

or

DATABASE.password




\conf\user.conf

Solaris or Linux :


The host name of the database to be accessed is invalid.

Check the value of the following file.

DATABASE.hostname

in



\conf\user.conf

Solaris or Linux :


The driver name for accessing the database is invalid.

Check the value of

DATABASE.type


Windows : HiCommand-Suite-Common-

Component-installationfolder

\conf\user.conf

Solaris or Linux :


A socket exception occurred while trying to establish a socket connection to server.

Make sure that InterClient is running.

A socket exception occurred while trying to establish a socket connection to server.


InterServer is unable to locate the

InterBase application or service.


aa...aa



aa...aa



Failed to unlock a table when inserting a record or records.


InterServer is unable to locate the

InterBase application or service.

Make sure that InterBase is running.

An SQLException has occurred.


Another type of exception occurred.


The table-unlock process that set the connection during the insert has failed.




Error Code

KAPM02010-E

KAPM02011-E

KAPM02012-E

KAPM02013-E

KAPM02014-E

KAPM02015-E

KAPM02016-E

KAPM02017-E

KAPM02018-E

KAPM02019-E

KAPM02021-E

KAPM02023-E

Error Message

Update data doesn't exist.


Delete data doesn't exist.


Search data doesn't exist.


Exception happened when some CIM class was used.


An attempt to load the definition for a class has failed. Class name = aa...aa



A class definition could not be found.

Class name = aa...aa



A RepositoryException occurred.


The parameter is null.


The parameter is invalid.


The CIMElement already exists.



The CIMElement could not be found.


The CIMObjectPath is incorrect. A key is required.



The data could not be found.






An error occurred while reading or using the value specified in CIM.


An attempt to load the definition for a class has failed.


A class definition could not be found.

Reboot the single signon service.

A RepositoryException occurred.


The parameter is null.




The CIMElement already exists.


Duplicate data exists.


The CIMElement could not be found.


The CIMObjectPath is incorrect. A key is required.




8-23

8-24

Error Code

KAPM02025-E

KAPM02027-E

KAPM02029-E

Error Message

The CIMObjectPath contains an invalid property.


The key property could not be changed.


The initialize parameter is invalid.


KAPM02030-E

KAPM02031-E

KAPM02032-E

KAPM02033-E

KAPM02034-E

KAPM02035-E

KAPM02036-E

An unsupported data type was used.


The CIMClass is invalid. A KEY property is required.


The CIMClass could not be deleted, because it contains instances.


The CIMClass could not be deleted, because it contains subclasses.


A ClassNotFoundException occurred.


A CIMInConnectionPoolException occurred.


A connection to the database could not be established.


KAPM02038-W A DeadLockException occurred.

Description = aa...aa



KAPM02039-W A CIMInDeadLockException occurred.


KAPM02040-E The CIMInstance is invalid.



The CIMObjectPath contains an invalid property.


The key property could not be changed.


The initialize parameter in init.conf is invalid.


An unsupported data type was used.


The CIMClass is invalid. A KEY property is required.


The CIMClass could not be deleted, because it contains instances.


The CIMClass could not be deleted, because it contains subclasses.




A CIMInConnectionPoolException occurred.


A connection to the database could not be established.


A DeadLockException occurred.


A CIMInDeadLockException occurred.


The CIMInstance is invalid.




Error Code

KAPM02041-E

KAPM02042-E

KAPM02044-E

KAPM02045-E

KAPM02046-E

KAPM02047-E

KAPM02048-E

KAPM02049-E

KAPM02050-E

KAPM02051-E

KAPM02052-E

KAPM02053-E

KAPM02054-E

Error Message

The CIMObjectPath is invalid.


The name of property is invalid.


A DBNotFoundException occurred.


The CIMClass is invalid.


The CIMProperty is invalid. The KEY property must be set.


The type of class is invalid.


Failed to get membership groups.


Not authorized object. ObjectName =

aa...aa

aa...aa: Object name


Host name is invalid.


Cannot connect to InterClient.


Cannot connect to InterBase.


SQLException occurred. Description =

aa...aa

aa...aa: Description


Exception occurred. Description =

aa...aa




The CIMObjectPath is invalid.


The name of property is invalid.


A DBNotFoundException occurred.


The CIMClass is invalid.


The CIMProperty is invalid. The KEY property must be set.


The type of class is invalid.


Failed to get membership groups.


Not authorized object.


Host name is invalid.


Cannot connect to InterClient.


Cannot connect to InterBase.


SQLException occurred.


Exception occurred.




8-25

Error Code

KAPM02055-E

KAPM02056-E

KAPM02057-E

KAPM02058-E

KAPM02059-E

KAPM02060-E

KAPM02061-E

KAPM02062-I

KAPM02063-I

KAPM02069-E


CIMException occurred. Description =

aa...aa



A CIMClassNotFoundException occurred.


IOException occurred. Description =

aa...aa



InterruptedException occurred.

Description = aa...aa



The time limit for establishing a connection is over.


An attempt to establish a connection has failed.


aa...aa



The get method changed the state to the standby state.


The createConnection method changed the state to the standby state.


A time-over error occurred when connecting to the repository.


CIMException occurred.




IOException occurred.


InterruptedException occurred.


The time limit for establishing a connection is over.







The get method changed the state to the standby state.

The createConnection method changed the state to the standby state.

A time-over error occurred when connecting to the repository.

If you are trying to log in, log in again. If you have already logged in, retry the operation.




KAPM02070-E

KAPM02071-E

KAPM02072-E

KAPM02073-E

A CIMUnavailableDatabaseException occurred. Detailed message of exception

= aa...aa

aa...aa: Detailed message of exception


HiRDB is not running.


The password of a user connected to

HiRDB is invalid. (user name = aa...aa)

aa...aa: User name


The user name of a user connected to

HiRDB is invalid. (user name = aa...aa)



KAPM02074-W The table name registered into DBMS is changed. Before= aa...aa After =

bb...bb

aa...aa: Before

bb...bb: After


KAPM02075-E An attempt to set a connection to the factory has failed.


KAPM02076-I

Processing to initialize the connection pool was executed.

aa...aa: Initial value, bb...bb: Increment value, cc...cc: Maximum value, dd...dd:

Keep-alive period, ee...ee: Timeout period, ff...ff: Number of retries,

gg...gg: Retry interval

aa...aa: Initial value

bb...bb: Increment value

cc...cc: Maximum value

dd...dd: Keep-alive period

ee...ee: Timeout period

ff...ff: Number of retries

gg...gg: Retry interval



HiRDB is not running.

Please start HiRDB.

A CIMUnavailableDatabaseException occurred.


The password of a user connected to

HiRDB is invalid.

Check the value of

HiRDB.password

in the user.conf

file. If that is not the problem, contact the Support Center.

The user name of a user connected to

HiRDB is invalid.

Check the value of

HiRDB.user

in the user.conf

file. If that is not the problem, contact the Support Center.

The table name to be registered in the

DBMS will be changed.

An attempt to set a connection to the factory has failed.


Processing to initialize the connection pool was executed.



8-27

Error Code

KAPM02077-E

KAPM02078-E

KAPM02079-E

KAPM02080-E

KAPM02201-I

KAPM02202-I

KAPM02203-I

KAPM02204-I

KAPM02210-E

KAPM02211-E

Error Message

An attempt to release the connection of the connection pool has failed.


A RepositoryException occurred. (details

= aa...aa)

aa...aa: Details


An attempt to release the JDBC connection has failed.


A CIMHeldRepositoryException has occurred. Exception message = aa...aa

aa...aa: detailed message of exception


The method was invoked.


The following arguments were specified:

aa...aa

aa...aa: Arguments


External module processing has started.

(module = aa...aa)

aa...aa: Module


External module processing has terminated. (module = aa...aa)

aa...aa: Module


The specified argument is null.


The password is not set.



This message is displayed when an attempt to release the connection of the connection pool fails.


This message is displayed when a

RepositoryException occurs.


This message is displayed when an attempt to release the JDBC connection fails.


A CIMHeldRepositoryException has occurred.


The method was invoked.

The following arguments were specified:

aa...aa

External module processing has started.

External module processing has terminated.

The specified argument is null.

The password is not set.





Error Code

KAPM02213-E

KAPM02214-E

KAPM02215-E

KAPM02216-E

KAPM02217-E

KAPM02218-E

KAPM02219-E

KAPM02220-E

KAPM02221-E

Error Message

An attempt to read the password file has failed.


An attempt to write to the password file has failed.




Confirm that the following file has read permissions. If it does have read permissions, collect maintenance information, and contact the Support

Center.

Windows: Hitachi-Storage-Command-


\conf\.hbaspass

Solaris or Linux:

/opt/HiCommand/Base/conf/.hbaspass

An attempt to write to the password file has failed.

Confirm that the following file has write permissions. If it does have write permissions, collect maintenance information, and contact the Support

Center.



\conf\.hbaspass

Solaris or Linux:

/opt/HiCommand/Base/conf/.hbaspass

The authenticated user does not have permission to execute the method.

The authenticated user does not have permission to execute the method.


The specified user was not found.


The specified group was not found.


The specified user already exists.


The specified group already exists.


The specified user is already registered in the group.

Output destinations: Destinations for output level 10. hadmin cannot be registered in the group.



The specified group was not found.


The specified group already exists.

The specified user is already registered in the group. hadmin cannot be registered in the group.



8-29

Error Code

KAPM02222-E

KAPM02223-E

KAPM02224-E

KAPM02225-E

KAPM02226-E

KAPM02227-E

KAPM02228-E

KAPM02229-E

KAPM02230-E

KAPM02231-E

KAPM02232-E

KAPM02233-E

KAPM02234-I

Error Message

An error occurred during user database access.


The specified mode is unsupported.




The specified user cannot be deleted.


The specified group cannot be deleted.


The common repository is stopping.


The user ID is not set.


The specified user ID is invalid.


The specified password is invalid.


The application type is not set.


The resource group ID is not set.


The specified application is not registered.


The permissions for aa...aa will now be changed. (User ID = aa...aa)

aa...aa: User ID



An error occurred during user database access.

Confirm that DBMS, HBase Storage Mgmt

Web Service and HBase Storage Mgmt

Common Service have started. If they have started, collect maintenance information, and contact the Support

Center.

The specified mode is unsupported.




The specified user cannot be deleted.

The specified group cannot be deleted.

The common repository has stopped.


The user ID is not set.


The specified user ID is invalid.




The application type is not set.


The resource group ID is not set.


The specified application is not registered.


The permissions for aa...aa will now be changed.



Error Code

KAPM02235-I

KAPM02236-I

KAPM02237-I

KAPM02238-I

KAPM02239-I

KAPM02240-I

KAPM02241-I

KAPM02242-I

KAPM02243-I

Error Message

The permissions for aa...aa were changed. (User ID = aa...aa)

aa...aa: User ID


A user account will now be created.

(User ID = aa...aa)

aa...aa: User ID


The user account was created successfully. (User ID = aa...aa)

aa...aa: User ID


The user-account properties will now be changed. (aa...aa)

aa...aa: Properties list before the change


The user-account properties were changed. (aa...aa)

aa...aa: Properties list after the change


The resource-group properties will now be changed. (aa...aa)

aa...aa: Properties list before the change


The resource-group properties were changed. (aa...aa)

aa...aa: Properties list after the change


The allocation status of the resource group will now be changed. (aa...aa)

aa...aa: Allocation status before the change


The allocation status of the resource group was changed. (aa...aa)

aa...aa: Allocation status after the change



The permissions for aa...aa were changed.

A user account will now be created.

The user account was created successfully.

The user account properties will now be changed.

The user account properties were changed.

The resource group properties will now be changed.

The resource group properties were changed.

The allocation status of the resource group will now be changed.

The allocation status of the resource group was changed.



8-31

Error Code

KAPM02244-I

KAPM02245-I

KAPM02246-I

KAPM02247-I

KAPM02248-I

KAPM02249-I

KAPM02250-E

KAPM02251-E

Error Message

The password will now be changed.


aa...aa: User ID


The password was changed. (User ID =

aa...aa)

aa...aa: User ID


The user account will now be deleted.


aa...aa: User ID


The user account was deleted. (User ID

= aa...aa)

aa...aa: User ID


The resource group will now be deleted.

(resource group ID = aa...aa, resource group name = bb...bb)

aa...aa: Resource-group ID

bb...bb: Resource-group name


The resource group was deleted.

(resource group ID = aa...aa, resource group name = bb...bb)

aa...aa: Resource-group ID

bb...bb: Resource-group name


A resource group with the same name has already been registered. (resource group name = aa...aa)

aa...aa: Resource-group name


A user account with the same user ID has already been registered. (User ID =

aa...aa)

aa...aa: User ID




The password was changed.

The user account will now be deleted.

The user account was deleted.

The resource group will now be deleted.

The resource group was deleted.

A resource group with the same name has already been registered.

A user account with the same user ID has already been registered.



Error Code

KAPM02252-E

KAPM02254-I

KAPM02255-E

KAPM02256-E

KAPM02257-E

KAPM02258-I

KAPM02259-I

KAPM02260-E

Error Message

A resource group with the same ID has already been registered. (group ID =

aa...aa)

aa...aa: Group ID


Request information: (API version =

aa...aa, Command name = bb...bb, User

ID or session ID = cc...cc)

aa...aa: API version

bb...bb: Command name

cc...cc: User ID or session ID


The specified version is not supported.

(version = aa...aa)



The specified command is not supported. (command = aa...aa)

aa...aa: Command name


Authentication has failed. (user ID =

aa...aa)

aa...aa: User ID


Response information: (API version =

aa...aa, Command name = bb...bb,

Response status = cc...cc)


bb...bb: Command name

cc...cc: Response status


Response information when an error occurs: (Error code = aa...aa,

Description = bb...bb)

aa...aa: Error code

bb...bb: Description


An attempt to communicate with a server has failed. (URL = aa...aa)

aa...aa: URL of the server



A resource group with the same ID has already been registered.

Request information.

The specified version is not supported.


The specified command is not supported.



Make sure the combination of user ID and password is correct.

Response information.

Response information when an error occurs.

An attempt to communicate with a server has failed.

Make sure the HBase Storage Mgmt

Common Service or the HBase Storage

Mgmt Web Service of the server specified in the URL has started.



8-33

Error Code

KAPM02261-E

KAPM02262-E

KAPM02263-E

KAPM02269-E

KAPM02270-E

KAPM02271-E

KAPM02272-E

KAPM02273-I

KAPM02274-I

KAPM02275-I

Error Message

An attempt to parse the response has failed.


The request parameter is invalid.


This user does not have execution permissions. (ID = aa...aa)




Output destinations: syslog/Eventlog/Destinations for output level 10, and windows.

The same user ID already exists.


An attempt to communicate with a database has failed.


An error occurred within the server.


The user will now be added. (ID =

aa...aa, user ID = bb...bb)


bb...bb: User ID


The user was added successfully. (ID =



bb...bb: User ID


The password will now be changed. (ID

= aa...aa, user ID = bb...bb)


bb...bb: User ID



An attempt to parse the response has failed.


The request parameter is invalid.


This user does not have execution permissions.



Another user might have deleted the specified user.

Refresh the display and make sure the selected user is registered.

The same user ID already exists.

Specify another user ID.

An attempt to communicate with a database has failed.

Make sure that HiRDB has started.



The user will now be added.

The user was added successfully.




Error Code

KAPM02276-I

KAPM02277-I

KAPM02278-I

KAPM02279-I

KAPM02280-I

KAPM02281-I

KAPM02282-I

Error Message

The password was changed successfully.

(ID = aa...aa, user ID = bb...bb)


bb...bb: User ID


The user profile will now be changed.

(ID = aa...aa, user ID = bb...bb)


bb...bb: User ID


The user profile was changed successfully. (ID = aa...aa, user ID =

bb...bb)


bb...bb: User ID


The permissions will now be changed.

(ID = aa...aa, user ID = bb...bb, permissions = cc...cc)


bb...bb: User ID

cc...cc: Permissions after the change


The permissions were changed successfully. (ID = aa...aa, user ID =

bb...bb, permissions = cc...cc)


bb...bb: User ID

cc...cc: Permissions after the change

Output destinations: syslog/Eventlog/Destinations for output level 10.

The user will now be deleted. (ID =



bb...bb: User ID


The user was deleted successfully. (ID =



bb...bb: User ID




The user profile will now be changed.

The user profile was changed successfully.

The permissions will now be changed.

The permissions were changed successfully.

The user will now be deleted.

The user was deleted successfully.



8-35

Error Code

KAPM02283-E

KAPM02284-I

KAPM02285-I

KAPM02286-E

KAPM02287-I

KAPM02288-I

KAPM02289-E

KAPM02290-I


The old password is incorrect. (ID =



bb...bb: User ID


The user will now be locked. (ID =

aa...aa, user ID = bb...bb)


bb...bb: User ID


The user was locked successfully. (ID =



bb...bb: User ID


An attempt to lock the user has failed.

aa...aa

aa...aa: Detailed information


The user will now be unlocked. (ID =



bb...bb: User ID


The user was unlocked successfully. (ID

= aa...aa, user ID = bb...bb)


bb...bb: User ID


An attempt to unlock the user has failed.

aa...aa



Authentication was successful. (user ID

= aa...aa)

aa...aa: User ID


The old password is incorrect.

The user will now be locked.

The user was locked successfully.

An attempt to lock the user has failed.

See the message that follows.

The user will now be unlocked.

The user was unlocked successfully.

An attempt to unlock the user has failed.

See the Message of the next message.

Authentication was successful.







KAPM02292-W Authentication has failed for aa...aa times in a row, so the user (bb...bb) was locked.

aa...aa: Failure times

bb...bb: User ID


KAPM02294-E

KAPM02295-E



A distinguished name has not been set.


KAPM02296-E

KAPM02297-E

KAPM02298-E

A domain name has not been set.


The specified distinguished name already exists. (distinguished name =

aa...aa)

aa...aa: Distinguished name


The specified distinguished name could not be found. (distinguished name =

aa...aa)



KAPM02301-E

KAPM02302-E

KAPM02303-E hcmds.home is not set in the Java system properties.


An error occurred during loading of a library.


An attempt to acquire user information about a HiRDB-connected user has failed. error code = aa...aa



Authentication has failed for aa...aa times in a row, so the user (bb...bb) was locked.



A distinguished name has not been set.


A domain name has not been set.


The specified distinguished name already exists.

Specify a different distinguished name.

The specified distinguished name could not be found.

Another user might have already deleted the specified authorization group.

Refresh the screen, and then check whether the specified authorization group is registered. hcmds.home

is not set in the Java system properties.


An error occurred during loading of a library.


An attempt to acquire user information about a HiRDB-connected user has failed.




8-37

Error Code

KAPM02304-E

KAPM02305-E

KAPM02306-E

KAPM02307-E

KAPM02401-E

Error Message

An attempt to set a system environment variable has failed. error code = aa...aa



Attempts to set the system environment variables PDDIR and PATH have failed. error code = aa...aa



An attempt to clear an HiRDB system environment variable has failed. error code = aa...aa



The application type is required, but is not set.


An attempt to read the file failed. (path

= aa...aa)

aa...aa: Path



An attempt to set a system environment variable has failed.


Attempts to set the system environment variables PDDIR and PATH have failed.


An attempt to clear an HiRDB system environment variable has failed.


The application type is required, but is not set.


An attempt to read the file failed.

Confirm that a file exists in the specified location.



Error Code

KAPM02409-E

Error Message

A communication error occurred in an external authentication server. (error code = aa...aa)

aa...aa: error code


KAPM02410-W Authentication with an external authentication server has failed. (user

ID = aa...aa, host = bb...bb, port =

cc...cc, protocol = dd...dd)

aa...aa: User ID

bb...bb: Host

cc...cc: Port

dd...dd: Protocol



A communication error occurred in an external authentication server.


For LDAP:

1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.

2. By using the hcmdsldapuser command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.



For RADIUS:

1. By using the host, port, and protocol set in "exauth.properties", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.

2. By using the hcmdsradiussecret command, check that the information for the server names specified in the "auth.server.name" attribute in "exauth.properties" is registered.


The login user failed to be authenticated on the external authentication server.




8-39


KAPM02411-W

Authentication with an external authentication server has failed. The specified user was not found in the external authentication server. (user ID

= aa...aa, host = bb...bb)

aa...aa: User ID

bb...bb: Host


KAPM02412-E

A naming exception occurred. (host =

aa...aa, port = bb...bb, protocol =

cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol



The login user was not found in the external authentication server.


A naming exception occurred.


For LDAP:





For RADIUS:






Error Code

KAPM02413-E

KAPM02414-I

Error Message

The negotiation for a TLS session has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol


Authentication with an external authentication server was successful.

(user ID = aa...aa, host = bb...bb, port

= cc...cc, protocol = dd...dd)

aa...aa: User ID

bb...bb: Host

cc...cc: Port

dd...dd: Protocol



Negotiation for a TLS session has failed.


For LDAP:





For RADIUS:




The login user was successfully authenticated on the external authentication server.



8-41

Error Code

KAPM02416-E

Error Message






For LDAP:





For RADIUS:



If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.



Error Code

KAPM02417-E

Error Message

Communication with an external authentication server has failed. (host =

aa...aa, port = bb...bb, protocol =

cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol




LDAP server has failed.


For LDAP:





For RADIUS:






8-43


KAPM02418-E

The LDAP service cannot be used. (host

= aa...aa, port = bb...bb, protocol =

cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol


KAPM02419-W Only local operation is available because the attempt to read the configuration file for the external authentication server has failed.


KAPM02422-W A parameter in the exauth.properties file contains an invalid value (aa...aa =

bb...bb). The default value (cc...cc) will be used.


bb...bb: Parameter value

cc...cc: Default value


The LDAP service cannot be used.


For LDAP:





For RADIUS:




Only local operation is available because the attempt to read the configuration file for the external authentication server has failed.

Review the settings in the configuration file for the external authentication server.

The exauth.properties file (configuration file for the external authentication server) contains an invalid parameter file.




Error Code

KAPM02423-E

KAPM02424-E

KAPM02425-E

KAPM02426-E

KAPM02427-E

KAPM02429-I

KAPM02430-E

Error Message

Authentication of the search user has failed. (host = aa...aa)

aa...aa: Host



Authentication of the search user at the

LDAP server has failed.

Use the hcmdsldapuser command to register the access user in the external authentication server. If the user has already been registered, check the settings for that user.

An error occurred in the LDAP server. An error occurred in the external authentication server.


A parameter was not specified.

(parameter = aa...aa)



Authentication stopped because a setting in the configuration file for the external authentication server was invalid.


An invalid character was specified in the

URL for a host name or a port number.

(host = aa...aa, port = bb...bb)

aa...aa: Host

bb...bb: Port


A RADIUS packet has been received.

(packet information = aa...aa)

aa...aa: Packet information


Verification of a RADIUS packet has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc, cause = dd...dd)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol

dd...dd: Cause of failure


A parameter is not specified in the configuration file for the external authentication server.


Authentication stopped because a setting in the configuration file for the external authentication server was invalid.


A URL for a host name or a port number, specified in the configuration file for the external authentication server, contains invalid characters.


A RADIUS packet has been received.

Verification of a RADIUS packet has failed.



8-45

Error Code

KAPM02431-E

Error Message

The connection to an external authentication server has timed out.

(host = aa...aa, port = bb...bb, protocol

= cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol



The connection to an external authentication server has timed out.


For LDAP:





For RADIUS:






Error Code

KAPM02432-E

Error Message

SSL-encrypted communication with the external authentication server has failed. (host = aa...aa, port = bb...bb, protocol = cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol


KAPM02434-W The lock processing was interrupted.


KAPM02435-W If the selected user accounts are locked, no more users will have the User

Management permission.


KAPM02436-E Determination of whether lock processing was performed has failed.



SSL-encrypted communication with the external authentication server has failed.


For LDAP:





For RADIUS:




The lock processing was interrupted.

Make a selection such that at least one user has the User Management permission.

If the selected user accounts are locked, no more users will have the User


Make a selection such that at least one user has the User Management permission.

Determination of whether lock processing was performed has failed.

Acquire the maintenance information, and then contact the Support Center.



8-47

8-48


KAPM02450-I

KAPM02451-W Authentication by an external authentication server has failed. (server type = aa...aa, host = bb...bb)

aa...aa: Server type

bb...bb: Host


KAPM02452-I

KAPM02453-E

A user's authentication method has been successfully changed. (authentication method = aa...aa, user ID = bb...bb) aa...aa: Authentication method bb...bb: User ID


An attempt to change a user's authentication method has failed.

(authentication method = aa...aa, user

ID = bb...bb)

aa...aa: Authentication method

bb...bb: User ID


KAPM02454-E

KAPM02455-E

Acquisition of SRV records failed.

(domain name = aa...aa, protocol =

bb...bb)

aa...aa: Domain name

bb...bb: Protocol


A domain has been removed from the domain list because the acquisition of

SRV records failed. (domain name =

aa...aa)



KAPM02456-E

KAPM02457-E

Authentication by an external authentication server was successful.

(server type = aa...aa, host = bb...bb)

aa...aa: Server type

bb...bb: Host


A function cannot be used because group mapping is disabled. (function name = aa...aa)

aa...aa: Function name


Acquisition of the password file failed.


This audit log data indicates that login was successful.

This audit log data indicates that login has failed.

This audit log data indicates that a user's authentication method has been successfully changed.

This audit log data indicates that an attempt to change a user's authentication method has failed.

Acquisition of SRV records failed.

Make sure that SRV records have been defined on the DNS server.

A domain has been removed from the domain list because the acquisition of

SRV records failed.

Make sure that SRV records have been defined on the DNS server.

A function cannot be used because group mapping is disabled.

Revise the settings in the configuration file for the external authentication server

( exauth.properties

).

Acquisition of the password file failed.




Error Code

KAPM02458-E

KAPM02459-E

KAPM02502-E

KAPM02503-E

KAPM02504-E

KAPM02505-E

Error Message

A setting in the configuration file for the external authentication server

( exauth.properties

) is invalid.



A setting in the configuration file for the external authentication server

( exauth.properties

) is invalid.


( exauth.properties

).

The domain cannot be linked to.

Use a domain that can be linked to.

The domain cannot be linked to.

(domain name = aa...aa)



Please enter a password that satisfies the following conditions:

A minimum of aa...aa upper-case characters.

A minimum of bb...bb lower-case characters.

A minimum of cc...cc numerals.

A minimum of dd...dd symbols.

Different from the user ID.

aa...aa: the minimum number of characters

bb...bb: the minimum number of characters

cc...cc: the minimum number of characters

dd...dd: the minimum number of characters





A minimum of aa...aa lower-case characters.



A minimum of aa...aa numerals.



Please enter a password that satisfies the following conditions:


A minimum of bb...bb lower-case characters.

A minimum of cc...cc numerals.

A minimum of dd...dd symbols.


Enter an appropriate value according to the error message.



A minimum of aa...aa lower-case characters.


A minimum of aa...aa numerals.




8-49

Error Code

KAPM02506-E

KAPM02507-E

KAPM02508-E

KAPM02509-E

KAPM02510-I

KAPM02511-E

KAPM02512-E

Error Message

A minimum of aa...aa symbols.





Enter a value that is exactly aa...aa characters long.

aa...aa: the maximum number of characters


The following characters can be used for the value:

A-Z a-z 0-9 # + - . @ _


Authentication by using a KDC was successful. (Kerberos principal =

aa...aa, KDC = bb...bb)

aa...aa: Kerberos principal name

bb...bb: KDC


Communication with KDC failed. (KDC =

aa...aa)

aa...aa: KDC


Resolution of the KDC host name failed.

(KDC = aa...aa)

aa...aa: KDC


KAPM02513-W Authentication by using a KDC failed.

(Kerberos principal = aa...aa, KDC =

bb...bb)

aa...aa: Kerberos principal name

bb...bb: KDC



A minimum of aa...aa symbols.




Enter a value that is exactly aa...aa characters long.


The following characters can be used for the value:

A-Z a-z 0-9 # + - . @ _


Authentication by using a KDC was successful.

Communication with KDC failed.

Make sure the specified KDC is correct.

Resolution of the KDC host name failed.




Make sure the specified KDC is correct.



Make sure the specified host name in the KDC is registered in the DNS server.

Authentication by using a KDC failed.




KAPM02514-I

The krb5.conf file, used for internal processing, was successfully deleted.

(file name = aa...aa)



KAPM02515-W Deletion of the krb5.conf file, used for internal processing, failed. (file name =

aa...aa)



KAPM02516-I The krb5.conf file, used for internal processing, was successfully created.




KAPM02517-E

KAPM02518-I

KAPM02519-E

Creation of the krb5.conf file, used for internal processing, failed. (file name =

aa...aa)



A request to acquire SRV records was sent. (record key = aa...aa)

aa...aa: SRV record key


Communication with the DNS server failed.



The krb5.conf file, used for internal processing, was successfully deleted.

Deletion of the krb5.conf file, used for internal processing, was successful.

The krb5.conf file, used for internal processing, was successfully created.

Creation of the krb5.conf file, used for internal processing, failed.

Make sure you have the necessary permissions to create the file on the specified path.

A request to acquire SRV records was sent.

KAPM02520-E The Kerberos authentication settings are invalid.


KAPM02521-E The Kerberos realm or KDC definition is invalid. (realm name = aa...aa)

aa...aa: Realm name


KAPM02522-W The SRV records are undefined. (record key = aa...aa)



Communication with the DNS server failed.

Make sure the DNS server settings in the

OS are correct.

Make sure the status of the network connected with the DNS server is normal.

The Kerberos authentication settings are invalid.

Revise the Kerberos authentication settings in the exauth.properties

file or the search user definition.

The Kerberos realm or KDC definition is invalid.

Check and, if necessary, revise the exauth.properties

file realm or the KDC definition.

The SRV records are undefined.



8-51

8-52

Error Code

KAPM02523-I

KAPM02524-E

KAPM02525-E

KAPM02526-I

KAPM02527-I

KAPM02528-I

KAPM02529-I

KAPM02551-E

Error Message

Acquisition of the SRV records was successful. (SRV record = aa...aa)

aa...aa: SRV record


Acquisition of the SRV records failed.

(record key = aa...aa)



An error occurred on the DNS server.


Processing to identify the user account will now start. (user ID = aa...aa, server type = bb...bb)

aa...aa: User ID

bb...bb: Server type


The user account was found. (user ID =

aa...aa, internal = bb...bb)

aa...aa: User ID

bb...bb: Boolean value that shows whether an external authentication server is used


The user account was not found. (user

ID = aa...aa)

aa...aa: User ID


The user account was identified. (user

ID = aa...aa, external = bb...bb,

Kerberos user = cc...cc, Kerberos realm

= dd...dd)

aa...aa: User ID

bb...bb: Boolean value that shows whether an external authentication server is used

cc...cc: Kerberos user name

dd...dd: Kerberos realm name


The following characters can be used for the value: aa...aa

aa...aa: Value



Acquisition of the SRV records was successful.

Acquisition of the SRV records failed.

Make sure that the SRV records are defined on the DNS server.

An error occurred on the DNS server.

Check the operation status of the DNS server.

Processing to identify the user account will now start.

The user account was found.

The user account was not found.

The user account was identified.

The following characters can be used for the value.




Error Code

KAPM02603-E

KAPM02604-E

KAPM02605-E

KAPM02606-E

KAPM02607-E

KAPM02615-E

KAPM02616-E

KAPM02617-E

KAPM02618-E

KAPM02620-E

KAPM02625-E

Error Message

The resource group already exists.

(resource group name = aa...aa)

aa...aa: Resource group name


An HcmdsInvalidOperationException occurred.


An HcmdsAuthorizationException occurred.


An HcmdsUserManagementException occurred.


Make sure that the users can be added.


An HSSOException occurred.



The resource group aa...aa already exists.

Check the resource group name, and then change it to a name that differs from the others.

Settings for adding a user are invalid.

Make sure that the settings for adding users are valid.

The logged in user does not have the required permissions to add users.

Add users by using an account that has the required permissions.

A problem occurred while adding a user.


Make sure that the users can be added.

An IOException occurred.


A CIMException occurred.





Make sure that the repository is running.

If you cannot, acquire the maintenance information, and then contact the

Support Center.


Make sure that the file input and output are correct. If you cannot, acquire the maintenance information, and then contact the Support Center.


Make sure that the access method for the repository is correct. If you cannot, acquire the maintenance information, and then contact the Support Center.


Make sure that the connection to the repository is correct. If you cannot, acquire the maintenance information, and then contact the Support Center.

The resource group was not found. The resource group was not found.


The specified software definition aa...aa was not found.



The specified software definition aa...aa was not found.



8-53

Error Code

KAPM02630-I

KAPM02631-I

KAPM02632-I

KAPM02633-I

KAPM02634-I

KAPM02635-E


A resource group has been created.

(login ID = aa...aa, resource group name = bb...bb, module name = cc...cc)

aa...aa: Login ID

bb...bb: Resource group name

cc...cc: Module name

Output destinations: Audit Log

A resource group has been deleted.

(login ID = aa...aa, resource group ID =

bb...bb, module name = cc...cc)

aa...aa: Login ID

bb...bb: Resource group ID



A resource has been added. (login ID =

aa...aa, resource group ID = bb...bb, module name = cc...cc)

aa...aa: Login ID




A resource has been removed. (login ID

= aa...aa, resource group ID = bb...bb, module name = cc...cc)

aa...aa: Login ID




A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name =

cc...cc)

aa...aa: Login ID




Creation of a resource group has failed.

(login ID = aa...aa, resource group name = bb...bb, module name = cc...cc)

aa...aa: Login ID

bb...bb: Resource group name



A resource group has been created.

(login ID = aa...aa, resource group name

= bb...bb, module name = cc...cc)

A resource group has been deleted.



A resource has been added. (login ID =

aa...aa, resource group ID = bb...bb, module name = cc...cc)

A resource has been removed. (login ID

= aa...aa, resource group ID = bb...bb, module name = cc...cc)

A resource group property has been edited. (login ID = aa...aa, resource group ID = bb...bb, module name =

cc...cc)

Creation of a resource group has failed.

(login ID = aa...aa, resource group ID =




Error Code

KAPM02636-E

KAPM02637-E

KAPM02638-E

KAPM02639-E

KAPM02650-I

KAPM02651-I

KAPM02652-I

Error Message

Deletion of a resource group has failed.



aa...aa: Login ID




Addition of a resource has failed. (login

ID = aa...aa, resource group ID =


aa...aa: Login ID




Removal of a resource has failed. (login



aa...aa: Login ID




An attempt to edit a resource group property has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)

aa...aa: Login ID




A parameter has been sent. (HSSO token = aa...aa, application name =

bb...bb)

aa...aa: HSSO token

bb...bb: Application name


The software definition aa...aa does not exist.



aa...aa is not associated with a resource bundle.




Deletion of a resource group has failed.



Addition of a resource has failed. (login

ID =aa...aa, resource group ID =


Removal of a resource has failed. (login



An attempt to edit a resource group property has failed. (login ID = aa...aa, resource group ID = bb...bb, module name = cc...cc)

A parameter has been sent. (HSSO token

= aa...aa, application name = bb...bb)

The specified software definition aa...aa does not exist in the repository.

aa...aa is not associated with a resource bundle.



8-55


KAPM02654-E

KAPM02656-I

KAPM02659-I

A ResourceTabHandleException occurred.


A parameter has been sent. (HSSO token = aa...aa, application name =

bb...bb, resource group ID = cc...cc, resource group name = dd...dd)

aa...aa: HSSO token

bb...bb: Application name

cc...cc: Resource group ID

dd...dd: Resource group name


No users that can be added exist.


KAPM02660-I

KAPM02661-I

A user has been added successfully.

(resource group name = aa...aa, user name = bb...bb)


bb...bb: User name


A user has been removed successfully.



bb...bb: User name


KAPM02704-W An invalid RUAccessPoint object was created. Addition to the launch list is not performed. Name=aa...aa, URL=bb...bb,

TokenVersion=cc...cc, IconUrl=dd...dd,

IconMsg=ee...ee

aa...aa: Name

bb...bb: URL

cc...cc: Token version

dd...dd: Icon URL

ee...ee: Icon message


KAPM02705-E CIMException occurred. The processing that acquires RUAccessPoint will now be interrupted.


A ResourceTabHandleException occurred.

Check and, if necessary, revise the registered software definitions and resource bundles.

A parameter has been sent. (HSSO token

= aa...aa, application name = bb...bb, resource group ID = cc...cc, resource group name = dd...dd)

No users that can be added exist.

A user has been added successfully.


A user has been removed successfully.


An invalid RUAccessPoint object was created. Addition to the launch list is not performed.

CIMException occurred. The processing that acquires RUAccessPoint will now be interrupted.




Error Code

KAPM02706-E

KAPM02802-E

KAPM02803-E

KAPM02804-E

KAPM02806-E

KAPM02809-E

KAPM02810-E

KAPM02811-E

Error Message

The URL format is failed. URL=aa...aa

aa...aa: URL



The URL format is failed.


aa...aa: Execution SQL statement


A HcmdsExecException occurred.

Message=aa...aa, Reason=bb...bb

aa...aa: Message

bb...bb: Reason


Option is invalid.


A Exception occurred. Message=aa...aa

aa...aa: Message


An SQL statement was executed.


A HcmdsExecException occurred.


Option is invalid.

Check the options.

A Exception occurred.


A stack trace will be output.


aa...aa: Stack trace


A FileNotFoundException occurred.



A SQLException occurred.

Message=aa...aa

aa...aa: Message


An EXECUPDATE statement failed.

Execution SQL statement = aa...aa





A FileNotFoundException occurred.


A IOException occurred.










8-57

8-58

Error Code

KAPM02812-E

KAPM02813-E

KAPM02814-E

KAPM02815-E

Error Message

A SQL statement failed.

Message=aa...aa, Reason=bb...bb

aa...aa: Message

bb...bb: Reason


An EXECQUERY statement failed.






File is not found. file-name = aa...aa



aa...aa: Record number


KAPM02818-I

KAPM02891-E

aa...aa: Number of columns


aa...aa: bb...bb

aa...aa: Column name

bb...bb: Value


DB is not found.



A SQL statement failed.


An EXECQUERY statement failed.




File is not found.


Displays the record number.

Displays the number of columns.

Displays the column name and value.

KAPM02892-E User name or password is invalid.


Database is not found.

Check the value of configuration file.

DATABASE.path

in the



\conf\user.conf

Solaris or Linux :


User name or password is invalid.

Check the value of

DATABASE.user

and

DATABASE.password




\conf\user.conf

Solaris or Linux :




Error Code

KAPM02893-E

KAPM02894-E

KAPM02895-E

KAPM02896-E

KAPM02902-E

Error Message

The host name is invalid.


No suitable driver exists.


A connection to InterClient could not be established.


A connection to InterBase could not be established.



aa...aa: Trace message






Check the value of

DATABASE.hostname




\conf\user.conf

Solaris or Linux :



Check the value of

DATABASE.type


Windows : HiCommand-Suite-Common-


\conf\user.conf

Solaris or Linux :



Confirm that the InterClient service is running.


Confirm that the InterBase service is running.

Processing continuation is impossible.


A trace message will be output.



Read legacy record.



Order of hcmdsID change from x to 0.







Change legacy record.

Update CIMClient From 01-00 to 01-

01.

Already update.















Update DB Version.

Create TNB_Classes.

Create TNB_ClassAttribute.

Drop TNB_SERVICEACCESSBYSAP.

Drop

TNB_SOFTWAREFEATURESERVICEIMP

L.

Drop CIMClasses.

Succeed in update DataBase.





8-59

8-60

Error Code

KAPM02903-E

KAPM02904-E

KAPM02905-E

KAPM02907-E

KAPM02910-E

KAPM02911-E

KAPM02912-E

KAPM02913-E

KAPM02914-E

Error Message

A HcmdsUpdateException occurred.

Message = aa...aa, Reason = bb...bb

aa...aa: Message

bb...bb: Reason


An option is invalid.


An exception occurred. Message =

aa...aa

aa...aa: Message



A HcmdsUpdateException occurred.




An exception occurred.


aa...aa: Stack trace


A SQLException occurred. Message =

aa...aa

aa...aa: Message


A SELECT statement failed. Table name

= aa...aa

aa...aa: Table name


An ALTER statement failed. Table name

= aa...aa



A DROP statement failed. Table name =

aa...aa



An UPDATE statement failed. Table name = aa...aa







A stack trace is output.




A SELECT statement failed.


An ALTER statement failed.


A DROP statement failed.


An UPDATE statement failed.






Error Code

KAPM02980-I

KAPM02981-I

KAPM02982-I

KAPM02991-E

KAPM02992-E

KAPM02993-E

KAPM02994-E

KAPM02995-E

Error Message

Update CIMClient from 01-00 to 01-01.


The database has already been updated.


The database was successfully updated.


DB is not found.











Update CIMClient from 01-00 to 01-01.

The database has already been updated.


Database is not found.


DATABASE.path

in the



\conf\user.conf

Solaris or Linux:



Check the value of

DATABASE.user

and

DATABASE.password




\conf\user.conf

Solaris or Linux:



Check the value of

DATABASE.hostname

the configuration file.

in



\conf\user.conf

Solaris or Linux:



Check the value of

DATABASE.type


Windows: HiCommand-Suite-Common-


\conf\user.conf

Solaris or Linux:



Confirm that the InterClient service is running.



8-61

Error Code

KAPM02996-E

KAPM03001-E

KAPM03004-E

KAPM03005-E

KAPM03006-E

KAPM03007-E

KAPM03026-E

KAPM03050-E

KAPM03051-E

KAPM03052-E

KAPM03053-E

KAPM03054-E

Error Message




Illegal parameters have been specified to create HSSO Context.


An error occurred on the HSSO Server.


An error occurred when CIM Client was created.


An unexpected error occurred.


A frame-enabled browser is required.

Output destinations: In window only.

A CIMException was generated during

Console screen display processing.


The parameter sent from the JP1/IM-

View is invalid.


The Launchurl is invalid.


The JP1user ID is invalid.


The JP1token is invalid.


An acquisition failure occurred in

RequestDispatcher.




Confirm that the InterBase service is running.

Fatal error occurred.



Specify the correct user ID and password.

An error occurred on the HSSO server.


An error occurred when CIM Client was created.





Use Internet Explorer 5.5 later or

Netscape 6 later.




The parameter sent from the JP1/IM-

View is invalid.


The Launchurl is invalid.

The JP1user ID is invalid.

The JP1token is invalid.

An acquisition failure occurred in

RequestDispatcher.



Error Code

KAPM03055-E

KAPM03080-E

KAPM03081-E

KAPM03082-E

KAPM03083-E

KAPM03084-E

KAPM03085-E

KAPM03086-E

KAPM03105-E

KAPM03106-E

KAPM03107-E

Error Message

A JavaScript-enabled browser is required.


HSSOIllegalArgumentException:Illegal parameters have been specified to create HSSO Context.


HSSONotRegisteredException: The application is not registered.


HSSOAuthenticationException:

Authentication failed.


HSSOServerException: An error occurred in HSSO Server.


IOException: HSSO SERVER Connection

Error.


HSSOIllegalArgumentException:

"createToken()" was used before authentication.


HSSOIllegalStateException: An unsupported version is specified.


A CIMException was generated during menu bar display processing.


A CIMException was generated during subwindow display processing.


A CIMRepositoryException was generated during menu bar display processing.



A JavaScript-enabled browser is required.

Use a browser that can use JavaScript.

Alternatively, change the setting of the browser to use JavaScript if the use of script is disabled.

HSSOIllegalArgumentException:Illegal parameters have been specified to create

HSSO Context.


HSSONotRegisteredException: The application is not registered.


HSSOAuthenticationException:



HSSOServerException: An error occurred in HSSO Server.


IOException: HSSO SERVER Connection

Error.


HSSOIllegalArgumentException:

"createToken()" was used before authentication.


HSSOIllegalStateException: An unsupported version is specified.




A CIMException was generated during subwindow display processing.






8-63

Error Code

KAPM03108-E

KAPM03109-E

KAPM03110-E

KAPM03111-E

KAPM03112-E

KAPM03113-E

KAPM03114-E

KAPM03119-I

KAPM03120-I

KAPM03122-E

KAPM03123-E

Error Message

A CIMRepositoryException was generated during subwindow display processing.


A CIMProviderException was generated during menu bar display processing.


A CIMProviderException was generated during subwindow display processing.


An exception was generated during menu bar display processing.


An exception was generated during subwindow display processing.


A NoSuchElementException was generated during menu bar display processing.


A NoSuchElementException was generated during subwindow display processing.


Are you sure that you want to log out?


Do you want to end the application?


The request parameter for a launch is invalid.


Could not acquire the required parameter. ParmName=aa...aa




A CIMRepositoryException was generated during subwindow display processing.




A CIMProviderException was generated during subwindow display processing.


An exception was generated during menu bar display processing.


An exception was generated during subwindow display processing.




A NoSuchElementException was generated during subwindow display processing.


Are you sure that you want to log out?

Do you want to end the application?

The request parameter for a launch is invalid.


Center.

The required parameter could not be acquired.


Center.



Error Code

KAPM03124-E

KAPM03125-E

Error Message

Failed to changing of token version.

Token=aa...aa

aa...aa: Token


Failed to getting of service information.

Description=aa...aa




An attempt to change the token version has failed.


Center.

The acquisition of the service information has failed.


Center.

An attempt to get the path string failed.

Log in again.

KAPM03304-E An attempt to get the path string failed.


KAPM03354-W

A value is not set because an argument is invalid.


KAPM03355-W A value is not acquired because an argument is invalid.


KAPM03356-W A default is set because an argument is invalid. default = aa...aa

aa...aa: Default


KAPM03357-E A parameter of request is invalid. paramName = aa...aa, value = bb...bb


bb...bb: Value


KAPM03358-E

KAPM03361-E

KAPM03362-E

The tree element is invalid. treeElement

= aa...aa

aa...aa: Tree element


An attempt to get the root element data has failed.


An attempt to get the common repository has failed.


A value is not set because an argument is invalid.

A value is not acquired because an argument is invalid.

A default is set because an argument is invalid.

A parameter of request is invalid.

Log in again.

The tree element is invalid.

Log in again.

An attempt to get the root element data has failed.


An attempt to get the common repository has failed.




8-65


KAPM03363-E

KAPM03364-E

An attempt to get the common resource has failed.


The registered data in the common repository is invalid.


KAPM03366-E An attempt to get the name of default view is invalid. application name =

aa...aa



KAPM03368-W An invalid association definition exists in the repository. instance = aa...aa

aa...aa: Instance


KAPM03370-W

A tree element relation

(TNB_AssocNavigationDef) is invalid. name=aa...aa, associationClass=bb...bb, fromName=cc...cc, toClassName=dd...dd, fromRole=ee...ee, toRole=ff...ff

aa...aa: Related name

bb...bb: Related class name

cc...cc: Class name of a relation place

dd...dd: Class name of a related agency

ee...ee: Attribute of a relation place

ff...ff: Attribute of a related agency


KAPM03371-W A tree element relation

(TNB_AllInstanceNavigationDef) is invalid. name=aa...aa, fromName=bb...bb, toClassName=cc...cc

aa...aa: Related name

bb...bb: Class name of a relation place

cc...cc: Class name of a related


KAPM03375-W An attempt to get the tree element data has failed. element = aa...aa

aa...aa: Element



An attempt to get the common resource has failed.




An attempt to get the name of default view is invalid.


An invalid association definition exists in the repository.



(TNB_AssocNavigationDef) is invalid.


(TNB_AllInstanceNavigationDef) is invalid.

An attempt to get the tree element data has failed.




KAPM03377-W

A tree has not been created in the state where the specification object was opened. objectName = aa...aa



KAPM03378-W The specified object does not exist or is not shown in the tree. pathName =

aa...aa, objectName = bb...bb

aa...aa: Path name

bb...bb: Object name


KAPM03379-E

KAPM03380-W An active object was not found. By default, the root object will be set.


KAPM03381-E

An attempt to create a tree from a request has failed.


An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, log in again and then retry.


KAPM03382-E

KAPM03383-E

A tree has not been created in the state where the specification object was opened.

The specified object does not exist or is not shown in the tree.

An attempt to create a tree from a request has failed.

Log in again.

An active object was not found. By default, the root object will be set.

An internal error occurred. If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, collect maintenance information, and then contact customer support.


An internal error has occurred. Retry the operation. If the problem still cannot be solved, log in again and then retry.


An internal error occurred.

If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, log in again and then retry. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.


If you click the Refresh button, the initial object tree will be displayed. If you cannot display the tree, log in again and then retry. If the problem cannot be solved, collect maintenance information, and then contact the Support Center.

An internal error has occurred.

Retry the operation. If the problem still cannot be solved, log in again and then retry.

Do the following:

1. Retry the operation.

2. If the problem still cannot be solved, log in again and then retry.

3. If the problem still cannot be solved, collect maintenance information and contact the Support Center.



8-67


KAPM03384-E

KAPM03501-E

An internal error has occurred. Retry the operation. If the problem still cannot be solved, collect maintenance information, and then contact customer support.


A CIM object name is not available for the selected object.


KAPM03502-W There is no default method.


KAPM03503-W The repository data is invalid, so the localization object acquisition failed.


KAPM03504-W A resource is not found, so the localization object acquisition failed.


KAPM03505-W The selected object is already deleted.


KAPM03702-E A HSSOIllegalStateException occurred during launch.


KAPM03703-E An attempt to get to the URL encoding of a token failed. token = aa...aa

aa...aa: Token


KAPM03708-E

KAPM03709-E

A HSSOAuthenticationException was generated during user profile display processing.


A HSSOIllegalArgumentException was generated during user profile display processing.


KAPM03710-E A HSSOServerException was generated during user profile display processing.



An internal error has occurred.

Retry the operation. If the problem cannot be solved, collect maintenance information, and then contact the

Support Center.

A CIM object name is not available for the selected object.


There is no default method.

The repository data is invalid, so the localization object acquisition failed.


A resource is not found, so the localization object acquisition failed.


The selected object is already deleted.

Click the Refresh in NavigationFrame.

A HSSOIllegalStateException occurred during launch.


An attempt to get to the URL encoding of a token failed.


A HSSOAuthenticationException was generated during user profile display processing.


A HSSOIllegalArgumentException was generated during user profile display processing.


A HSSOServerException was generated during user profile display processing.





KAPM03712-E

KAPM03716-E

KAPM03717-W The resource bb...bb for object aa...aa cannot be accessed.


bb...bb: Resource name


KAPM03718-E The data format of the resource bb...bb for the object aa...aa is invalid.


bb...bb: Resource name


KAPM03721-E The attribute bb...bb for object aa...aa is missing.


bb...bb: Value of attribute


KAPM03722-E

KAPM03723-E

An attempt to get membership groups failed.


The format of the URL bb...bb for the object aa...aa is invalid.


bb...bb: URL


The resource information of bb...bb for object aa...aa is missing.


bb...bb: Related name


Property cc...cc of bb...bb for object

aa...aa is missing.


bb...bb: Related name

cc...cc: Value of attribute


KAPM03931-W Your session is invalid. Logout, and then login again.


KAPM03951-E An internal server error has occurred.


An attempt to get membership groups failed.


The format of the URL bb...bb for the object aa...aa is invalid.


The resource bb...bb for object aa...aa cannot be accessed.

The data format of the resource bb...bb for the object aa...aa is invalid.


The attribute bb...bb for object aa...aa is missing.


The resource information of bb...bb for object aa...aa is missing.


Property cc...cc of bb...bb for object

aa...aa is missing.


Your session is invalid. Logout, and then login again.

An internal server error has occurred.




8-69

Error Code

KAPM03952-E

KAPM03954-E

KAPM03956-E

KAPM03957-E

KAPM03958-E

KAPM03960-E

KAPM03961-E

KAPM03962-E

Error Message

An attempt to get the Session has failed.


An attempt to get the HSSOSubject has failed.


The login process has not completed properly.





The request type is not correct.


An attempt to get the string from the

ResourceBundle failed.


An attempt to get the

RequestDispatcher for "aa...aa" failed.

aa...aa: Unexpected operation


An attempt to get the application name has failed.




An attempt to get the Session has failed.


An attempt to get the HSSOSubject has failed.


The login process has not completed properly.

Specify the correct user ID and password.




The request type is not correct.


An attempt to get the string from the

ResourceBundle failed.


An attempt to get the RequestDispatcher for "aa...aa" failed.


An attempt to get the application name has failed.



Log in again. If the problem cannot be solved, collect maintenance information and contact the Support Center.



Error Code

KAPM03964-E

KAPM03965-E

KAPM03966-E

Error Message

An error occurred on the Single Sign On server.




Communications of the Single Sign On server have failed.




Do the following:

1. When using HiCommand V3.x series, make sure that the InterBase service is running. When using the

HiCommand V4.x series or later, make sure that HiRDB is running.

2. If you are using HiCommand Device

Manager, make sure its services are running.

3. Make sure that the settings and statuses of the Single Sign On server service are appropriate.

4. If the problem cannot be solved, collect maintenance information and contact the Support Center.


Do the following:

1. When using HiCommand V3.x series, make sure that the InterBase service is running. If it is not running, start

InterBase and log in again. If it is running, restart the Single Sign On

Server, and log in again.

When using the HiCommand V4.x series or later, make sure that HiRDB is running. If it is not running, start

HiRDB and log in again. If it is running, restart the Single Sign On

Server, and log in again.

2. If you are using HiCommand Device

Manager, make sure its services are running.

3. Make sure that the settings and statuses of the Single Sign On Server are appropriate.

4. If the problem cannot be solved, collect maintenance information and contact the Support Center.


An error occurred on the web server or proxy server. Do the following:

1. Make sure that the services of the

Single Sign On server are running.




8-71

Error Code

KAPM03967-E

Error Message





An error occurred on the web server or proxy server. Do the following:

1. Make sure that Hitachi Storage

Command Suite Common Web Service is running.


The token is invalid.

Log in again.

KAPM03968-E

KAPM03969-E

KAPM03970-E

KAPM03971-E

The token is invalid. token=aa...aa.

aa...aa: Token


The request is invalid.token=aa...aa.

The name of application=bb...bb.

aa...aa: Token

bb...bb: Name of application


The request is invalid.token=aa...aa.

The name of application=bb...bb.

aa...aa: Token

bb...bb: Name of application


The application is not registered. The name of application=aa...aa.

aa...aa: Name of application


The request is invalid.




The application is not registered.




This message is displayed when the usage output method of the command starts.

This message is displayed when the usage output method of the command ends.

The hcmdssup

command has started.

KAPM04004-I

Output destinations: Destinations for output level 10. hcmdssup is finished.


KAPM04006-W Log initialization has failed.


The hcmdssup

command has stopped.

The process outputting the hcmdssup log has failed.




Error Code

KAPM04007-E

KAPM04008-E

KAPM04009-E

KAPM04010-E

KAPM04011-E

KAPM04012-E

KAPM04013-E

KAPM04014-E

KAPM04022-E

Error Message

File is not found. file-name=aa...aa



The error has occurred in file access. file-name=aa...aa



aa...aa

aa...aa: NumberFormat exception message


aa...aa

aa...aa: IllegalArgument exception message


aa...aa

aa...aa: NullPointerException message


aa...aa

aa...aa: IndexOutOfBounds exception message


aa...aa

aa...aa: SecurityException message


aa...aa



Hostname is too long.





The file could not be found.


An error occurred while the file was being accessed. hsso.conf


A NumberFormatException occurred during the processing of hcmdssup

.


An IllegalArgumentException occurred during the processing of hcmdssup

.


A NullPointerException occurred during the creation of an object, such as a file object.


An IndexOutOfBoundsException occurred during the processing of hcmdssup

.


A SecurityException occurred while a system property was being accessed.


An unexpected exception occurred.


The host name is too long.

Specify a host name less than 64 bytes.

The port number is invalid.

Specify a port number from 1 to 65535.

The port number is invalid.

The specified value is outside the integer range. Check the port number.



8-73

8-74


KAPM04025-I hcmdssup succeeded.


KAPM04027-E

KAPM04028-E

KAPM04034-E

KAPM04035-E

KAPM04036-E

KAPM04038-E

KAPM04040-E

KAPM04042-E

KAPM04050-I

KAPM04051-E

KAPM04052-E

The hcmdssup

was executed successfully.


The SSL port number is invalid.




An attempt to read the file hsso.conf has failed.


An attempt to write to the file hsso.conf has failed.

Output destinations: Destinations for output level 10, and windows. hcmdssup

has failed.



Specify a port number with a value from

1 to 65535.


The type of the port number is not an integer. Check the specified value.

An attempt to read the file hsso.conf has failed.

Make sure that the hsso.conf file exists, that you have access permissions for this file, and that the file is not in use.

An attempt to write to the file hsso.conf has failed.

Make sure that the hsso.conf file exists, that you have access permissions for this file, and that the file is not in use.

The specified command line input is invalid.

Specify a valid option, and then reexecute the command.

The specified command line input is invalid. (input data = aa...aa) aa...aa: input data


The specified host name is invalid.


The specified port number is invalid.


The specified SSL port number is invalid.


The command hcmdsprmset ended successfully.


The command hcmdsprmset has failed.




The specified host name is invalid.




The specified SSL port number is invalid.


The command ended successfully.

The command failed.


The specified command line input was invalid.

Make sure the command format is correct.



Error Code

KAPM04059-E

KAPM04061-E

KAPM04101-E

KAPM04102-E

KAPM04103-E

KAPM04104-I

KAPM04105-E

KAPM04106-E

KAPM04107-E

KAPM04108-E

KAPM04109-E

KAPM04110-E

Error Message

The specified host name is too long.


The value specified for an option is invalid.


Container server name is invalid.

Server= aa...aa

aa...aa: Container server name


Archive file is not found. file=aa...aa

aa...aa: Archive file name


Program type is invalid. type=aa...aa

aa...aa: Program type


Starting web application registration...


Privilege is invalid.



The specified host name is too long.



Revise the values specified for the options.

Container server name is invalid.


Archive file is not found.


Program type is invalid.


Web Application registration is now starting.

Cannot get tmpjavavm.properties file name.


Failed to get service registration status. service=aa...aa

aa...aa: Service name


Cannot get javavm.properties file name.


Cannot set JavaVM option.


Cannot set Java options.


The user does not have sufficient permissions to execute the command.

Execute the command as a user with

Administrator permission.

Cannot get tmpjavavm.properties file name.


Failed to get service registration status.


Cannot get javavm.properties file name.


Cannot set JavaVM option.


Cannot set Java options.




8-75

Error Code

KAPM04111-E

KAPM04112-E

KAPM04113-E

KAPM04114-E

KAPM04115-E

KAPM04116-I

KAPM04117-I

KAPM04118-E

KAPM04119-E

KAPM04120-E

KAPM04121-I

KAPM04122-E

Error Message

An attempt to check whether a program type exists in the hcmdswebpp.ini

file has failed.


Cannot write hcmdswebpp.ini

file.


Service registration has failed. service=aa...aa



Failed to get service registration status. service=aa...aa



Service registration has failed. service=aa...aa


Output destinations: Destinations for output level 0. hcmdsweb registration has succeeded.


Starting web application deletion...


Program type is not registered. type=aa...aa



Cannot delete service and folder.


Cannot delete hcmdswebpp.ini

file.

Output destinations: Destinations for output level 10. hcmdsweb deletion has succeeded.


Cannot get only a war file name.



An attempt to check whether a program type exists in the hcmdswebpp.ini

file has failed.


Cannot write hcmdswebpp.ini

file.


Service registration has failed.


Failed to get service registration status.


Service registration has failed.

Collect maintenance information and contact the Support Center. hcmdsweb registration was successful.

Web application deletion is now starting.

Program type is not registered.


Cannot delete service and folder.


Cannot delete hcmdswebpp.ini

file.

Collect maintenance information and contact the Support Center. hcmdsweb deletion was successful.

Cannot get only a war file name.




Error Code

KAPM04123-E

KAPM04124-E

KAPM04125-E

KAPM04126-E

KAPM04127-E

KAPM04128-E

KAPM04129-E

KAPM04130-E

KAPM04133-E

KAPM04134-E

KAPM04135-E

Error Message

Cannot get hcmdswebpp.ini

file name.


Cannot get name. tmphcmdswebpp.ini

file


Log initialization has failed.



Cannot get hcmdswebpp.ini

file name.


Cannot get tmphcmdswebpp.ini

file name.


Cannot insert new line character.


An attempt to exchange hcmdswebpp.ini

with tmphcmdswebpp.ini

has failed.

Output destinations: Destinations for output level 10. hcmdsweb

registration has failed.

Output destinations: Destinations for output level 0. hcmdsweb

deletion has failed.


Cannot read hcmdswebpp.ini

file.




The parameter is incorrect.


The database specified does not exist.


An unexpected error occurred. Error code = aa...aa





Cannot insert new line character.


An attempt to exchange hcmdswebpp.ini

with tmphcmdswebpp.ini

has failed.

Collect maintenance information and contact the Support Center. hcmdsweb

registration has failed.

Take action according to the last message. hcmdsweb

deletion has failed.

Take action according to the last message.

Cannot read hcmdswebpp.ini

file.


OpenSCManager

command error.


Access is denied.


The parameter is incorrect.


The database specified does not exist.






8-77

Error Code

KAPM04136-E

KAPM04137-E

KAPM04138-E

KAPM04139-E

KAPM04140-E

KAPM04141-E

KAPM04142-E

KAPM04143-E

KAPM04144-E

KAPM04145-E

KAPM04146-E

Error Message

RegOpenKeyEx command error.ErrorCode(aa...aa)



A duplicate name exists on the network.


The filename, directory name, or volume label syntax is incorrect.


The account name is invalid or does not exist.


Circular service dependency was specified.


Service already exists. service=aa...aa



The handle is invalid.


The specified service has been marked for deletion.


CreateService command error. code=aa...aa



DeleteService command error. code=aa...aa



OpenService command error. code=aa...aa




RegOpenKeyEx command error.


A duplicate name exists on the network.


The filename, directory name, or volume label syntax is incorrect.


The account name is invalid or does not exist.


Circular service dependency was specified.


Service already exists.


The handle is invalid.


The specified service has been marked for deletion.


CreateService

command error.


DeleteService


OpenService

command error.

command error.




Error Code

KAPM04147-E

KAPM04148-E

KAPM04149-E

KAPM04150-E

KAPM04151-E

KAPM04152-E

KAPM04153-E

KAPM04154-E

KAPM04155-E

KAPM04156-E

Error Message

The specified service does not exist as an installed service.


RegQueryValueEx command error. code=aa...aa



The error has occurred in aa...aa command. code=bb...bb

aa...aa: Command

bb...bb: Error code


The directory cannot be removed. directory=aa...aa

aa...aa: Directory name


The directory is not empty. directory=aa...aa



The directory name is invalid. directory=aa...aa



QueryServiceStatus command error. code=aa...aa



Failed to get installation directory.


Failed to get Service name. service=aa...aa



Service is running. service=aa...aa




The specified service does not exist as an installed service.


RegQueryValueEx

command error.


The error has occurred in aa...aa command.


The directory cannot be removed.


The directory is not empty.


The directory name is invalid.


QueryServiceStatus

command error.


Failed to get installation directory.


Failed to get Service name.


Service is running.

Stop the service, and then execute the command again.



8-79

Error Code

KAPM04157-E

KAPM04158-E

KAPM04159-E

Error Message

Failed to get service status. service=aa...aa



File is not found. file=aa...aa



Failed to delete specified file. file=aa...aa




Failed to get service status.


File is not found.


Failed to delete specified file.


KAPM04161-E

aa...aa: Original file name

bb...bb: New file name


Privilege is invalid to access aa...aa file.



KAPM04162-E

KAPM04163-E

Failed to copy from aa...aa to bb...bb.

aa...aa: Name of the source file

bb...bb: Name of the destination file


Failed to delete service. service=aa...aa



KAPM04164-W Failed to delete the war file. file=aa...aa

aa...aa: War file name


KAPM04165-W

Failed to delete the folder. folder=aa...aa

aa...aa: Folder name


KAPM04166-E Failed to delete service. service=aa...aa



Failed to rename aa...aa to bb...bb.


Permission to access the file is insufficient.


Failed to copy from aa...aa to bb...bb.


Failed to delete service.


Failed to delete the war file.


Failed to delete the folder.


Failed to delete service.





KAPM04167-E

Failed to get service folder. servicefolder=aa...aa

aa...aa: Service folder name


KAPM04168-W Failed to delete service folder. servicefolder=aa...aa

aa...aa: Service folder name


KAPM04169-E

KAPM04172-E

KAPM04173-E

File is not found. file=aa...aa



Failed to write usrconf.properties to installation information.


Failed to read usrconf.properties file.


KAPM04174-E Failed to exchange usrconf.properties to tmpusrconf.properties.


KAPM04175-E

KAPM04176-E

KAPM04177-E

KAPM04178-E

KAPM04197-I

Failed to create directory. directory=aa...aa



Failed to get the war file name. file=aa...aa



Failed to read javavm.properties file.


An attempt to exchange javavm.properties

with tmpjavavm.properties

has failed.


Service registration has succeeded. service=aa...aa




Failed to get service folder.


Failed to delete service folder.


File is not found.


Failed to write usrconf.properties

to installation information.


Failed to read usrconf.properties

file.


Failed to exchange usrconf.properties

to tmpusrconf.properties

.


Failed to create directory.


Failed to get the war file name.


Failed to read javavm.properties file.


An attempt to exchange javavm.properties with tmpjavavm.properties has failed.


The service was successfully registered.



8-81

8-82

Error Code

KAPM04198-I

KAPM04202-I

KAPM04205-E

KAPM04206-E

KAPM04207-E

KAPM04208-E

KAPM04209-E

KAPM04211-E

KAPM04212-E

KAPM04213-E

KAPM04214-E

KAPM04215-E

Error Message

Service registration has succeeded. service=aa...aa



Service deletion has succeeded. service=aa...aa



Memory alloc error. code=aa...aa



The system cannot find the file specified.


The system cannot find the path specified.


The system cannot open the file.


The process cannot access the file because it is being used by another process.


Failed to get tmpusrconf.properties file name.


Failed to get usrconf.properties file name.


ExtractionWarFolderPath function error.


Failed to get web-users.xml file name.


Failed to get template usrconf.properties file name.



The service was successfully registered.

The service was successfully deleted.

Memory alloc error.


The system cannot find the file specified.


The system cannot find the path specified.


The system cannot open the file.


The process cannot access the file because it is being used by another process.


Failed to get tmpusrconf.properties file name.


Failed to get usrconf.properties file name.


ExtractionWarFolderPath function error.


Failed to get web-users.xml file name.


Failed to get template usrconf.properties file name.




Error Code

KAPM04216-E

KAPM04217-E

KAPM04218-E

KAPM04219-E

KAPM04220-E

KAPM04221-E

KAPM04222-E

KAPM04223-E

KAPM04224-E

KAPM04225-E

KAPM04226-E

KAPM04227-E

KAPM04228-E

Error Message

Failed to get template web-users.xml file name.


Failed to get template javavm.properties file name.


Failed to get Display name.


Failed to load hntr2t.dll

. code=aa...aa



The file

option is invalid.


The type

option is invalid.


The server

option is invalid.


The classpath

option is invalid.


The librarypath

option is invalid.


The javaoption

option is invalid.


The

Xms

option is invalid.


The

Xmx

option is invalid.


RegCreateKeyEx

command error. code=aa...aa




Failed to get template web-users.xml file name.


Failed to get template javavm.properties file name.


Failed to get Display name.


Failed to load hntr2t.dll.


The file

option is invalid.


The type

option is invalid.


The server

option is invalid.


The classpath

option is invalid.


The librarypath

option is invalid.


The javaoption

option is invalid.


The

Xms

option is invalid.


The

Xmx

option is invalid.


RegCreateKeyEx

command error.




8-83

8-84

Error Code

KAPM04229-E

KAPM04230-I

KAPM04231-E

KAPM04232-E

KAPM04233-E

KAPM04234-E

KAPM04235-E

KAPM04236-E

KAPM04237-E

KAPM04238-E

KAPM04239-E

Error Message

RegSetValueEx

command error. code=aa...aa



Service deletion has succeeded. service=aa...aa





An attempt to register the program type in the registry failed. program type = aa...aa



An attempt to delete the program type in the registry failed. program type = aa...aa



Failed to remake service.


The minimum heap size has exceeded the maximum heap size.


The minimum heap size has exceeded the already set up maximum heap size.


The service name exceeds 256 characters.


The service registration is not possible because the service name exceeds 256 characters.


An attempt to get the service control manager execution file path failed.



RegSetValueEx

command error.


Service deletion has succeeded.



An attempt to register the program type in the registry failed.


An attempt to delete the program type in the registry failed.


Failed to remake service.


The minimum heap size has exceeded the maximum heap size.


The minimum heap size has exceeded the already set up maximum heap size.


The service name exceeds 256 characters.


The service registration is not possible because the service name exceeds 256 characters.


An attempt to get the service control manager execution file path failed.




Error Code

KAPM04240-E

KAPM04241-E

KAPM04242-E

KAPM04243-E

KAPM04244-E

KAPM04245-E

KAPM04246-E

KAPM04247-E

KAPM04248-E

KAPM04249-E

Error Message

An error occurred when the environment settings folder was created.


An error occurred when the environment settings file was set.


An error occurred when the web application archive file was expanded.


An error occurred when a directory expanded with the web application archive file was deleted.


An error occurred when registering and updating the web server.


An error occurred when registering and updating Tomcat.


An error occurred when the usrconf.properties file was merged.


An attempt to acquire the number of file lines has failed.


An attempt to create Map information has failed.


An attempt to read data from a file has failed.



An error occurred when the environment settings folder was created.


An error occurred when the environment settings file was set.


An error occurred when the web application archive file was expanded.


An error occurred when a directory expanded with the web application archive file was deleted.


An error occurred when registering and updating the web server.

If you are using Windows, close the

Services window (in the Control Panel), and then re-install. If the problem cannot be solved, collect maintenance information and contact the Support

Center.

An error occurred when registering and updating Tomcat.

If you are using Windows, close the

Services window (in the Control Panel), and then re-install. If the problem cannot be solved, collect maintenance information and contact the Support

Center.

An error occurred when the usrconf.properties file was merged.


An attempt to acquire the number of file lines has failed.


An attempt to create Map information has failed.


An attempt to read data from a file has failed.




8-85

Error Code

KAPM04250-E

KAPM04251-E

KAPM04252-E

KAPM04253-E

KAPM04254-E

KAPM04255-E

KAPM04256-E

KAPM04257-E

KAPM04258-E

Error Message

An attempt to set the javaVM debug option has failed.


The jvmoption

option is invalid.


An error occurred in an internal function.

(call function = aa...aa, use function =

bb...bb, note = cc...cc, error code =

dd...dd)

aa...aa: Call function

bb...bb: Use function

cc...cc: Note

dd...dd: Error code


A memory allocation error occurred.

(call function = aa...aa, use function =

bb...bb, note = cc...cc, error code =

dd...dd)

aa...aa: Call function

bb...bb: Use function

cc...cc: Note

dd...dd: Error code


An attempt to acquire the daemon shell name has failed.


An attempt to write service registration information to the version file has failed.


An attempt to delete service registration information from the version file has failed.


An attempt to start the hcmdssrv command has failed.


An error occurred during execution of the hcmdssrv command.



An attempt to set the JavaVM debug option has failed.


The jvmoption

option is invalid.






An attempt to acquire the daemon shell name has failed.


An attempt to write service registration information to the version file has failed.


An attempt to delete service registration information from the version file has failed.


An attempt to start the hcmdssrv command has failed.


An error occurred during execution of the hcmdssrv command.





KAPM04259-E

KAPM04260-E

KAPM04261-E

An attempt to create the boot shell has failed.


The startup mode of the service is invalid. (start mode = aa...aa)

aa...aa: Start mode


The starttype

option is invalid.


KAPM04262-E

KAPM04263-E

KAPM04264-E

An attempt to create the usrconf.cfg file has failed.


An attempt to deploy the compiled JSP file has failed.


A path was not found for the Web application folder. (folder path =

aa...aa)

aa...aa: Folder path


KAPM04265-E

KAPM04266-E

A path was not found for the compiled

JSP storage folder. (folder path =

aa...aa)

aa...aa: Folder path


The contents of the directory are invalid.

(Directory path = aa...aa)

aa...aa: Directory path


KAPM04267-W An attempt to delete the hwc directory has failed. (Directory path = aa...aa)

aa...aa: Directory path


KAPM04271-E An attempt to update the web application version has failed.



An attempt to create the boot shell has failed.


The startup mode of the service is invalid.


The starttype

option is invalid.

Confirm the specification of the starttype

option.

An attempt to create the usrconf.cfg file has failed.


An attempt to deploy the compiled JSP file has failed.


A path was not found for the Web application folder.


A path was not found for the compiled

JSP storage folder.


The contents of the directory are invalid.


An attempt to delete the hwc directory has failed.

An attempt to update the Web application version has failed.




8-87


KAPM04272-E

Failed to delete specified directory.

Directory=aa...aa

aa...aa: Directory


KAPM04273-W An attempt to execute the aa...aa function has failed. (error code =

bb...bb, description = cc...cc)

aa...aa: Function name


cc...cc: Error description


KAPM04274-E An attempt to load the DLL has failed.


KAPM04275-E

KAPM04276-E

KAPM04279-E

KAPM04280-E

KAPM04281-E

KAPM04282-E

KAPM04283-E


Failed to delete specified directory.

See the message KAPMxxxxx-W.

This message is displayed if an attempt to add a service description has failed.

The service explanation was not added.

It will be added the next time the hcmdsweb

command is executed.

An attempt to acquire the function address in the DLL has failed.


The file does not exist. (file name =

aa...aa)



An attempt to add a service description has failed.




The specified service is not registered.


An attempt to acquire the installation directory has failed.


The name of the specified service is invalid.


This message is displayed if an attempt to load the DLL has failed.


This message is displayed if an attempt to acquire the function address in the

DLL has failed.


This message is displayed if the file does not exist.


This message is displayed if an attempt to add a service description has failed.

Take the appropriate action based on the preceding message.

This message is displayed if a memory allocation error has occurred.

Please see the message that follows.

This message is displayed if the specified service is not registered.


This message is displayed if an attempt to acquire the path of the Hitachi Storage

Command Suite Common Component installation folder has failed.


This message is displayed if the specified service name is invalid.




Error Code

KAPM04284-E

KAPM04285-E

KAPM04286-E

KAPM04287-E

KAPM04288-E

KAPM04289-E

KAPM04290-E

KAPM04291-I

KAPM04292-I

KAPM04293-E

KAPM04294-I

KAPM04295-I

Error Message

An attempt to access the service explanation definition file has failed.


The service explanation definition file is invalid.


An attempt to change a service configuration parameter has failed.


An attempt to connect the service control manager has failed.


An attempt to open the service handle has failed.


An attempt to access the service explanation definition file has failed.


The service name was not specified.


Registration of the aa...aa Web application will now start.



Deletion of the aa...aa Web application will now start.



An attempt to delete the JSP servlet class file has failed.


The JSP servlet class file was deleted successfully.


Deletion of the JSP servlet class file will now start.



This message is displayed if an attempt to access the service explanation definition file has failed.


This message is displayed if the service explanation definition file is invalid.


This message is displayed if an attempt to change a service configuration parameter has failed.


This message is displayed if an attempt to connect the service control manager has failed.


This message is displayed if an attempt to open the service handle has failed.


This message is displayed if an attempt to access the service explanation definition file has failed.


This message is displayed if the service name is not specified.


Web application registration is now starting.

Web application deletion is now starting.

An attempt to delete the JSP servlet class file has failed.


The JSP servlet class file was deleted successfully.

Deletion of the JSP servlet class file will now start.



8-89

Error Code

KAPM04296-I

KAPM04301-I

KAPM04303-I

KAPM04304-I

KAPM04306-I

KAPM04307-E

KAPM04311-E

KAPM04312-E

Error Message

Deletion of the JSP servlet class file will now end.



Deletion of the JSP servlet class file will now end.

Uninstallation of aa...aa has started.



[All processing has finished.]


All processing has finished.

Uninstallation was successful.


All of the services for aa...aa have been deleted.



Restart the machine, and then execute the program again.


All of the services for aa...aa have been deleted.

Restart the machine, and then execute the program again.

Uninstallation has failed.

Manually perform the deletion. Output destinations: Destinations for output level 10, and windows.

Uninstallation was successful. Restart the machine.


"aa...aa" has not stopped. Stop the service, and then try again.



An attempt to acquire an installation path for aa...aa has failed. Manually delete the installation directory.



An attempt to acquire registry information has failed.


Uninstallation was successful. Restart the machine.

aa...aa has not stopped.

Stop the service, then retry.

An attempt to acquire an installation path for aa...aa has failed.

Manually delete the installation directory.

An attempt to acquire registry information has failed.




KAPM04313-E

KAPM04314-E

An attempt to acquire the registry information has failed. Manually delete the registry information.


Some files remained. Manually delete them.


KAPM04315-W All the files for aa...aa will now be deleted. Is this OK?



KAPM04316-W Are you sure you want to delete all of the files?





An attempt to acquire the registry information has failed. Manually delete the registry information.

Some files remained. Manually delete them.

All the files for aa...aa will now be deleted. Is this OK?

Are you sure you want to delete all of the files?

Uninstallation was interrupted.

KAPM04318-I

KAPM04319-E


The OS setting information was successfully deleted.


An attempt to delete the OS setting information has failed.


KAPM04320-W The resident process "aa...aa" has not stopped.

aa...aa: Process name


KAPM04321-I The OS settings information will now be deleted to stop the resident process.


The OS setting information was successfully deleted.

An attempt to delete the OS setting information has failed. manually perform the deletion.

The resident process aa...aa has not stopped.

The OS settings information will now be deleted to stop the resident process.

A DOMException has occurred.




A RuntimeException has occurred.




8-91

Error Code

KAPM04380-E

Error Message

MalformedURLException occurred.

aa...aa
















A MalformedURLException has occurred.


An IllegalDataException has occurred.


An IllegalOptionException has occurred.

Specify a valid option to execute the command.

An IOException has occurred.


A SAXException has occurred.


An HttpProtocolException has occurred.


A ServerNotStartException has occurred.

Confirm that Device Manager, Hitachi

Storage Command Suite Common Web

Service, and Hitachi Storage Command

Suite Single Sign On Service are running, and that the port numbers used by these services are correct.

An Exception has occurred.


Servlet initialization has started.



Error Code

KAPM04405-E

KAPM04421-E

KAPM04422-E

KAPM04423-E

KAPM04426-E

KAPM04429-E

KAPM04440-E

Error Message

Can't read DTD file.



An attempt to read the DTD file has failed.

Windows: Copy the file hcmdsrepClient.dtd

and hcmdsrepServer.dtd

from Hitachi-



\sample\conf

to Hitachi-Storage-

Command-Suite-Common-Componentinstallation-folder

\conf

Solaris or Linux: Copy the file hcmdsrepClient.dtd


from

/opt/HiCommand/Base/sample/conf

to

/opt/HiCommand/Base/conf

The IP address of the requesting client.

aa...aa: IP address


The error has occurred in Repository process.


The illegal data has detected in Server process.


The error has occurred in Server process.


The version is incorrect. Version aa...aa is required.

aa...aa: Versions supported by the server


An error occurred during server processing.


Token has timed out.


The error has occurred in Repository process.

When using HiCommand V3.x series, make sure that InterBase or InterClient is running. If the problem cannot be solved, contact the Support Center.

When using the HiCommand V4.x series or later, make sure that HiRDB is running. If the problem cannot be solved, contact the Support Center.

The illegal data has detected during server process.




The client version is not 1.0.




Token has timed out.

Execute hcmdsrep again.



8-93


Repository registration is now starting.


KAPM04455-W aa...aa has already registered in

Repository.

aa...aa: Value specified by the type option and the displayname option


KAPM04463-W aa...aa is not found in Repository.



KAPM04464-E aa...aa is associated with more than one

ServiceAccessPoint Instances.



aa...aa was already registered in the repository.

Specify a different combination of the type

option and the displayname

option to execute hcmdsrep

.

aa...aa was not found in the repository.

Specify registered information to execute hcmdsrep

.

aa...aa is associated with more than one

ServiceAccessPoint Instance.

The database may be broken. Collect maintenance information and contact the

Support Center.

Deletion of product information from the repository is now starting.


KAPM04468-W aa...aa is not found in Repository.



aa...aa was not found in the repository.

Specify a valid program type to execute hcmdsrep

.

Acquisition of display information from the repository is now starting.

KAPM04475-W No results were found in Repository.


KAPM04480-E


Type name is too Long.


No results were found in Repository.

KAPM04481-E

KAPM04489-E

Type or URL is not set.


This version does not support the add option.


Type name is too Long.


Support Center.

Type or URL is not set.


Support Center.

This version does not support the add option.

The add option cannot be used.



Error Code

KAPM04499-E

KAPM04510-E

KAPM04511-E

KAPM04512-E

KAPM04513-E

KAPM04514-E

KAPM04515-E

KAPM04516-E

KAPM04517-E

KAPM04518-E

KAPM04519-E

KAPM04520-E

Error Message

Detail of exception: aa...aa

aa...aa: Contents of the exception


Option is invalid. option= aa...aa

aa...aa: Option



aa...aa: Option



aa...aa: Option


Option value is invalid. optionvalue=aa...aa

aa...aa: Option value


Following Option is not supported:

aa...aa

aa...aa: Option



aa...aa: Option



aa...aa: Option


Option is invalid.


Option is invalid.


Option is invalid.


Option is invalid.



Detail of exception.


Specify a valid option.





An option value is invalid.








Option is invalid.


Option is invalid.


Option is invalid.


Option is invalid.




8-95

8-96

Error Code

KAPM04521-E

KAPM04522-E

KAPM04523-E

KAPM04524-E

KAPM04525-E

KAPM04529-E

KAPM04554-E

Error Message

Option is invalid.


Invalid Group or Role.


Username or password is invalid.


Failed to connect to HiCommand Suite

Single Sign On Service.


Failed to connect to HiCommand Device

Manager.



Option is invalid.


Invalid Group or Role.

Specify the name and password of a user who belongs to the GROUP "Global" and

ROLE "Admin".

Username or password is invalid.

Specify a user name and password registered in Device Manager.

Failed to connect to Hitachi Storage

Command Suite Single Sign On Service.

Confirm that Hitachi Storage Command

Suite Single Sign On Service is running.

Failed to connect to Device Manager.

Confirm that the Device Manager service is running.




Option needs value. option=aa...aa

aa...aa: Option


An HSSOException has occurred.


A FileNotFoundException has occurred.

Windows: Copy the file hcmdsrepClient.dtd


from Hitachi-



\sample\conf

Command-Suite-Common-Componentinstallation-folder

to Hitachi-Storage-

\conf

Solaris or Linux: Copy the file hcmdsrepClient.dtd


from

/opt/HiCommand/Base/sample/conf

to

/opt/HiCommand/Base/conf



An option requires a value.

Specify a value for the option.





Not support tag type detected.


An unsupported tag type was detected.




Error Code

KAPM04555-E

KAPM04556-E

KAPM04557-E

KAPM04558-E

KAPM04560-I

KAPM04561-I

KAPM04562-E

KAPM04563-E

KAPM04601-E

KAPM04602-E

KAPM04603-E

Error Message

Value is too long.


Failed to connect to HiCommand Suite

Common Web Service.


A single sign-on server exception has occurred.


An invalid role was detected.

Output destinations: Destinations for output level 10. hcmdsrep

add has succeeded. aa...aa


Output destinations: In window only. hcmdsrep

delete has succeeded. aa...aa



add has failed. aa...aa



delete has failed. aa...aa



Command format is invalid.


Command format is invalid. invalidparam=aa...aa

aa...aa: Invalid parameter


File is not found. file-name=aa...aa




The value is too long.

Enter a string that does not exceed the character limit.

Hitachi Storage Command Suite Common

Web Service could not be connected.

Confirm that Hitachi Storage Command

Suite Common Web Service is running.


Confirm that the Hitachi Storage

Command Suite Server is running.

Confirm that the used database is running.

If the problem cannot be solved, contact the Support Center.

An invalid role was detected.

Specify a user belonging to the group

"Admin" or "Peer" and the user's password. hcmdsrep

add has succeeded. hcmdsrep

delete has succeeded. hcmdsrep

add has failed.

See the message output prior to receiving this message. hcmdsrep

delete has failed.

See the message output prior to receiving this message.

The command format is invalid.


The command format is invalid.


The file could not be found.




8-97

8-98

Error Code

KAPM04604-E

KAPM04605-E

KAPM04606-E

KAPM04608-I

KAPM04609-E

KAPM04613-I

KAPM04614-E

Error Message

Directory is not found. directoryname=aa...aa



Bundle PP Name is invalid. name=aa...aa

aa...aa: Invalid value


Web Container server is invalid. name=aa...aa

aa...aa: Invalid value


Setup completed successfully.


Failed to create file. file-name=aa...aa



Delete completed successfully.


Failed to setup server.


KAPM04615-E Failed to delete server.


KAPM04616-E

KAPM04702-E

KAPM04703-E

KAPM04705-E

Server is running. pid=aa...aa

aa...aa: Process ID


The option(s) specified is insufficient.


The option value specified is invalid.


The option "aa...aa" is not supported.

aa...aa: Option



The directory could not be found.


The value of the type option is invalid.


The value of the server option is invalid.


Setup completed successfully.

An attempt to create a file has failed.


Delete completed successfully.

An attempt to set up the server has failed.


An attempt to delete the server has failed.


The server is running.










Error Code

KAPM04706-E

KAPM04707-E

KAPM04710-E

KAPM04711-E

KAPM04713-E

KAPM04714-E

KAPM04715-E

KAPM04716-E

KAPM04717-E

Error Message

The option "aa...aa" appears 2 times or more.

aa...aa: Option


The combination of options is invalid.









An exception occurred. See the following message KAPM49001-E for details.







The input XML contains a grammar mistake.


Failed to connect to HBase Storage

Mgmt Common Service.


Failed to connect to HBase Storage

Mgmt Web Service.


Failed to connect to the host specified in hsso.conf.


An invalid URL was detected. ( aa...aa )

aa...aa: URL




Failed to connect to HBase Storage Mgmt

Common Service.

Confirm that HBase Storage Mgmt

Common Service is running.

Failed to connect to HBase Storage Mgmt

Web Service.

Confirm that the HBase Storage Mgmt

Web Service has started. If the HBase

Storage Mgmt Web Service has started, confirm that the hostname in hsso.conf is correct.



\conf\hsso.conf

Solaris or Linux:

/opt/HiCommand/Base/conf/hsso.conf

Failed to connect to the host specified in hsso.conf.

Confirm that the host name in hsso.conf is correct.



\conf\hsso.conf

Solaris or Linux:

/opt/HiCommand/Base/conf/hsso.conf

An invalid URL was detected.

Confirm that the URL is correct.



8-99

8-100


KAPM04718-E

KAPM04719-E

The server returned an empty response.


An unsupported element type was detected in the XML.


KAPM04722-W aa...aa error(s) were detected in the response.

aa...aa: Number of errors


KAPM04723-E

KAPM04724-E

KAPM04800-E

Invalid error information was detected.


Invalid server information was detected.


Authentication information is insufficient.







aa...aa error(s) were detected in the response.






Authentication information is insufficient.

Use a SOAP Client that send

Authentication information.

KAPM04802-E

KAPM04803-E

KAPM04805-E


A single sign-on server communication exception has occurred.




An XML parser exception occurred.


Authentication has failed to authenticate the specified user id or password. See the following message KAPM49001-E for details.


Communication between a single sign-on client and the server has failed. See the following message KAPM49001-E for details.


A single sign-on server exception has occurred. See the following message

KAPM49001-E for details.

When using HiCommand V3.x series, confirm that InterServer/InterBase or

Device Manager is running. If the problem cannot be solved, collect maintenance information and contact the

Support Center.

When using the HiCommand V4.x series or later, make sure that HiRDB or Device

Manager are running. If the problem cannot be solved, collect maintenance information and contact the Support

Center.

An XML parser exception occurred.





KAPM04806-E

KAPM04807-E

The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is

dd...dd. TARGET=ee...ee

aa...aa: XML tag name including unexpected value

bb...bb: Name of attribute unexpected value is set

cc...cc: Unexpected value of attribute

dd...dd: Value of attribute the server expects

ee...ee: Information for processing


The XML element aa...aa is not allowed as a child of element bb...bb.

TARGET=cc...cc

aa...aa: Tag name of unexpected element

bb...bb: Tag name of element including unexpected element

cc...cc: Information for processing


KAPM04808-W The received XML attribute aa...aa is not allowed as an attribute of bb...bb.

TARGET=cc...cc

aa...aa: Unexpected attribute name

bb...bb: Tag name of element including unexpected attribute



KAPM04809-E Message catalog information is insufficient for the log message.

TARGET=aa...aa

aa...aa: Information for processing


KAPM04810-E

KAPM04812-E


TARGET=aa...aa



Failed to connect to HiCommand Device

Manager.



The received XML element aa...aa contains an unexpected value cc...cc for attribute bb...bb. The expected value is

dd...dd.


The XML element aa...aa is not allowed as a child of element bb...bb.


The XML attribute aa...aa is not allowed as an attribute of bb...bb.


Message catalog information is insufficient for the log message.



See the following message KAPM49001-E for details.


Failed to connect to Device Manager.

Confirm that the service is running and check the value of HDVM.host in the init.conf file.



8-101


KAPM04813-E

KAPM04814-W

The CIM datatype aa...aa is invalid for

bb...bb; it will be handled as a string type.

aa...aa: Specified CIM data type name

bb...bb: Attribute name Specified CIM data type is specified


KAPM04815-E

An exception occurred. TARGET=aa...aa



KAPM04816-E

This operation aa...aa is unknown.

TARGET= bb...bb

aa...aa: Unexpected operation

bb...bb: Information for processing


INSTANCENAME cannot be used for the set operation. TARGET=aa...aa



KAPM04817-E The CIM operation aa...aa is missing required argument bb...bb.

TARGET=cc...cc

aa...aa: CIM operation name

bb...bb: Essential parameter name



KAPM04818-I

KAPM04819-I

Starting CIM access... Method = aa...aa

aa...aa: Name of the method of the repository API


Ending CIM access...


KAPM04820-I

KAPM04821-I

Receiving a request...


Replying to the request...





The CIM datatype aa...aa is invalid for

bb...bb; it will be handled as a string type.

Specify a supported data type.

This operation aa...aa is unknown.


INSTANCENAME cannot be used for the set operation.


The CIM operation aa...aa is missing a required argument bb...bb.


CIM access is starting.

Ending CIM access.

Receiving a SOAP request.

Replying to the SOAP request.



Error Code

KAPM04826-I

KAPM04827-I

KAPM04828-I

KAPM04829-I

KAPM04830-I

KAPM04832-E

KAPM04833-E

KAPM04834-E


The instance has been updated.

TARGET=aa...aa



A new instance has been created.

TARGET=aa...aa



The class is empty. TARGET=aa...aa



The instance could not be found.

TARGET=aa...aa



The instance was deleted.

TARGET=aa...aa



The input data aa...aa is not valid for data type bb...bb. TARGET=cc...cc

aa...aa: Input data value

bb...bb: Input data type



The received XML element bb...bb is missing a required attribute aa...aa.

TARGET=cc...cc

aa...aa: Required attribute name

bb...bb: XML tag name which contains attribute of aa...aa



The received XML element bb...bb is missing a required child element aa...aa.

TARGET=cc...cc

aa...aa: XML tag name of the required element

bb...bb: XML tag name of the parent element



The instance has been updated by the set operation.

A new instance has been created by the set operation.

The result of the enumerate operation shows the class is empty.

The instance could not be found.

The instance was deleted.

The input data aa...aa is not valid for data type bb...bb. See the following message KAPM49001-E for details.


The received XML element bb...bb is missing a required attribute aa...aa.


The received XML element bb...bb is missing a required child element aa...aa.




8-103

8-104


KAPM04835-W

The received XML element bb...bb has no child element aa...aa.

TARGET=cc...cc

aa...aa: Required tag name

bb...bb: Tag name of parent element



KAPM04836-E The received XML element aa...aa with attribute bb...bb=cc...cc is duplicated.

TARGET=dd...dd

aa...aa: Duplicated tag name of XML element

bb...bb: Attribute name

cc...cc: Attribute value

dd...dd: Information for processing


KAPM04837-E

KAPM04838-I

The XML element aa...aa as child of element bb...bb is duplicated.

TARGET=cc...cc

aa...aa: Duplicated tag name of XML element

bb...bb: Tag name of parent element



The class has been created.

TARGET=aa...aa



KAPM04839-I

KAPM04840-I

KAPM04841-I

KAPM04842-E

The class already exist. TARGET=aa...aa



The class could not be found.

TARGET=aa...aa



The class was deleted. TARGET=aa...aa



The class aa...aa of the instance is invalid. TARGET=aa...aa




The received XML element bb...bb has no child element aa...aa.

Specify the bb...bb element for the

aa...aa element in the XML file.

The received XML element aa...aa with attribute bb...bb=cc...cc is duplicated.


The XML element aa...aa as child of element bb...bb is duplicated.


The class has been created.

The class already exists.

The class could not be found.

The class was deleted.

The class aa...aa of the instance is invalid.





KAPM04901-E

KAPM04902-E

KAPM04905-E

KAPM04906-I





An attempt to open the file failed. Path

= aa...aa

aa...aa: File path name


The alias for aa...aa was set.

aa...aa: Program product name


KAPM04907-I

KAPM04908-I

The alias for aa...aa was overwritten.



The alias for aa...aa was deleted.



KAPM04910-W The alias for aa...aa does not exist.



KAPM04909-E

KAPM04933-E

KAPM04950-I

KAPM04951-I

The alias for aa...aa does not exist.





PrintWriter was created. path =

"aa...aa", file = "bb...bb"

aa...aa: Path of file bb...bb

bb...bb: File name


BufferedReader was created. path =

"aa...aa", file = "bb...bb"






Set the valid parameter.



An attempt to open the file failed.

Confirm that a file exists in the specified location or does not in use.

The alias for aa...aa was set.

The alias for aa...aa was overwritten.

The alias for aa...aa was deleted.




PrintWriter was created.

BufferedReader was created.



8-105


KAPM04952-E

KAPM04953-I

KAPM04954-W PrintWriter cannot be closed. PrintWriter is null.


KAPM04955-I

PrintWriter has closed.


BufferedReader has closed.


KAPM04956-W BufferedReader cannot be closed.

BufferedReader is null.


KAPM04957-E The specified application command is not registered. application name =

"aa...aa"

aa...aa: Specified application name


KAPM04958-E

KAPM04959-I

The specified application command is already registered. application name =

"aa...aa"

aa...aa: Specified application name


aa...aa has been added to the file.



KAPM04960-I

The file was not found. path = "aa...aa", file = "bb...bb"




KAPM04970-I

KAPM04971-E

aa...aa has been removed from the file.



Processing ended normally.


The specified command is already registered.



The file was not found.


PrintWriter has closed.

PrintWriter cannot be closed. PrintWriter is null.

BufferedReader has closed.

BufferedReader cannot be closed.

BufferedReader is null.

The specified application command is not registered.

The specified application command is already registered.

aa...aa has been added to the file.

aa...aa has been removed from the file.


The specified command is already registered.



Error Code

KAPM04972-E

KAPM04973-E

KAPM04974-E

KAPM04975-E

KAPM04976-E

KAPM04977-E

KAPM05001-I

KAPM05002-E

KAPM05003-E

KAPM05004-E

KAPM05005-E

Error Message

The specified command is not registered.






The type of OS is unknown.


IllegalOptionException occurred.

Description = "aa...aa"

aa...aa: Error details


InconsistencyException occurred.



Output destinations: Destinations for output level 10. hcmdssrv

was entered.


Command format is invalid.


Option is invalid. option=aa...aa

aa...aa: Invalid option


Server name is invalid. servername=aa...aa

aa...aa: Server name


The Win32API has failed. API name=aa...aa, error code=bb...bb

aa...aa: Name of the WIN32API

bb...bb: Results of GetLastError()



The specified command is not registered.





The type of OS is unknown.


IllegalOptionException occurred.


InconsistencyException occurred.


The hcmdssrv

command was entered.

The option is invalid.




The server name is invalid.


An error has occurred in WIN32API.




8-107

Error Code

KAPM05006-E

KAPM05007-I

KAPM05008-E

KAPM05009-I

KAPM05010-E

KAPM05011-E

Error Message

Failed to start service. servicename=aa...aa



Already started service. servicename=aa...aa



Failed to stop service. servicename=aa...aa



Already stopped service. servicename=aa...aa



Failed to query service. servicename=aa...aa



Failed to control service.


KAPM05012-E Failed to access registry. maintenancecode=aa...aa

aa...aa: Maintenance code


KAPM05013-W Failed to read init.conf. maintenancecode=aa...aa



KAPM05014-W Failed to initialize trace. apiname=aa...aa,reason=bb...bb

aa...aa: Log trace API name

bb...bb: Maintenance code



An attempt to start the service has failed.


The service is already running.

An attempt to stop the service has failed.


The service is already stopped.

An attempt to query the service status has failed.


An attempt to control the service has failed.


An attempt to access the registry has failed.


An attempt to read init.conf has failed.


An attempt to initialize the log has failed.

Make sure that multiple instances of the hcmdssrv

command are not executed concurrently. If the problem occurs frequently, collect maintenance information and contact the Support

Center.




KAPM05015-E

KAPM05016-I

An internal function has failed. Function name=aa...aa, error code=bb...bb

aa...aa: Internal function name



Succeeded in starting of service. service-name=aa...aa



KAPM05017-I

KAPM05018-E

Succeeded in stopping of service. service-name=aa...aa



A system call has failed. API name=aa...aa, error code=bb...bb

aa...aa: System call name



KAPM05019-W Definition is invalid. name=aa...aa

aa...aa: Definition value name


KAPM05020-E Failed to open file. maintenancecode=aa...aa



KAPM05021-E

KAPM05022-W Service does not exist.


KAPM05023-E

Service does not exist.


Could not find executable file. filename=aa...aa

aa...aa: Executable file


KAPM05024-W Failed to initialize trace. Reason=aa...aa

aa...aa: Reason



An internal function has failed.


A request to start the service was accepted.

A request to stop the service was accepted.

A system call has failed.


The definition is invalid.


An attempt to open the file has failed.


The service does not exist.


The service does not exist.


Could not find executable file.


Failed to initialize trace.

Processing is continued without a trace.



8-109


KAPM05025-I

KAPM05026-E

KAPM05027-E

KAPM05028-E

KAPM05029-E

KAPM05030-E

The start type has been successfully changed. service-name = aa...aa



An attempt to change the start type has failed. service-name = aa...aa



An attempt to start the DBMS service has failed.


An attempt to stop the DBMS service has failed.


An attempt to acquire the status of the

DBMS service has failed.


An attempt to query the status of a service has failed. (service name =

aa...aa)



KAPM05035-E

KAPM05036-I

An attempt to execute the command

aa...aa has failed.

aa...aa: executable file name


The command aa...aa was executed successfully. (return code = bb...bb)

aa...aa: executable file name

bb...bb: return code


KAPM05037-E An attempt to query a service has failed.


KAPM05038-W The error has occurred in aa...aa command. code=bb...bb

aa...aa: Command




The start type has been successfully changed.

An attempt to change the start type has failed.


An attempt to start the DBMS service has failed.

Refer to details to the hcmdsdbsrv log.

An attempt to stop the DBMS service has failed.


An attempt to acquire the status of the

DBMS service has failed.


An attempt to query the status of a service failed.

Take action according to the message output before or after this message.

An attempt to execute a command has failed.


A command was executed successfully.

An attempt to query a service has failed.

Take action according to the message output before or after this message.

The error has occurred in aa...aa command.



Error Code

KAPM05201-E

KAPM05202-E

KAPM05203-E

KAPM05204-E

KAPM05205-E

KAPM05206-E

KAPM05207-E

KAPM05208-E

KAPM05209-I

KAPM05210-E

KAPM05211-E

KAPM05212-E

KAPM05213-E option.

Error Message

The memory is insufficient.(aa...aa)

aa...aa: Variable name


The number of options is insufficient.


There is no value following the option.


Option is invalid.


There is only a value though there is no


The error occurred in dispatcher.


The error occurred in the registration of the service controller.


The error occurred in the

HandlerRoutine.


The service_stop_thread is started.


The error occurred in the service_stop_thread.


The error occurred in the Report Status.


The error occurred in create JavaVM.


Failed to set processing of JavaVM.



The memory is insufficient.


The number of options is insufficient.


An option has been specified without a value.


An option contains an error.


Only a value is specified for arguments, and not the corresponding option.


An error occurred in the dispatcher.


An error occurred in the registration of the service controller.


An error occurred during list addition of the process's handler function.


A service stop request thread was opened.


An error occurred in the service stop request thread.


An attempt to report progress to the service control manager has failed.


An error occurred while generating the

JavaVM.


An attempt to set up the JavaVM has failed.




8-111

Error Code

KAPM05214-I

KAPM05215-I

KAPM05216-E

KAPM05217-E

KAPM05218-E

KAPM05219-E

KAPM05220-E

KAPM05221-E

KAPM05222-E

KAPM05223-E

KAPM05224-E

KAPM05225-E

Error Message

aa...aa started.



aa...aa stopped.



The error occurred in the start of service.


Failed to get to the option definition file value.


Failed to change the current directory.


Failed to create JavaVM.


Failed to connect to JavaVM.


The class is not found.


The method is not found.



Getinstpath.(aa...aa)

aa...aa: Registry key or registry path


The error occurred in the LoadLibrary.



GetProcAddress.



The service has started.

The service has stopped.



An attempt to get the value of the option definition file has failed.


An attempt to change the current directory has failed.


An attempt to create the JavaVM has failed.


An attempt to connect to the JavaVM has failed.


The class was not found.


The method was not found.


An error occurred while acquiring a key or path from the registry.


An attempt to load the DLL has failed.


An attempt to get the function address in the DLL has failed.




Error Code

KAPM05226-E

KAPM05227-E

KAPM05228-E

KAPM05229-E

KAPM05230-E

KAPM05231-E

KAPM05232-E

KAPM05250-I

KAPM05251-I

KAPM05252-E

KAPM05253-E

KAPM05255-E

Error Message

The error occurred in the AllocConsole.


The error occurred in the DeleteFile.



GenerateConsoleCtrlEvent.



An error occurred while allocating a new console to a process.


An error occurred while deleting a file.


An error occurred while sending the specified signal to the console process group.


An attempt to execute the command to start the Web container server has failed.


An attempt to execute the command to start the Web container server has failed.


An attempt to execute the command to stop the Web container server has failed.


An attempt to execute the thread-dump acquisition command has failed.


The service stopped abnormally.

(service name = aa...aa)



Registration of the information-search user has finished.


Deletion of the information-search user has finished.




The specified option contains an invalid character.




An attempt to execute the command to stop the Web container server has failed.


An attempt to execute the thread-dump acquisition command has failed.


The service stopped abnormally.


Registration of the information-search user has finished.

Deletion of the information-search user has finished.

An option specified for the command is invalid.

Specify a correct option.

The specified option parameter contains an invalid character.

Specify valid characters for the option parameter.





8-113

8-114


KAPM05256-E

KAPM05257-E

KAPM05258-I

KAPM05259-I





The command has started.


The command has ended.


KAPM05263-W No registered information exists








The command has ended.

KAPM05264-E

KAPM05265-E

KAPM05266-W

KAPM05280-I

KAPM05281-I

KAPM05282-E

KAPM05285-E

KAPM05286-E

The file format is invalid.


An error occurred during file I/O processing.


A server has not been registered.


Registration of a secret has succeeded.


Deletion of a secret has succeeded.








No registered information exists.

Register the user information by using the set option, and then re-execute the command. If the same message is output again, acquire the maintenance information, and then contact the

Support Center.





No information was displayed when the list option was specified.


Support Center.

Registration of a secret has succeeded.

Deletion of a secret has succeeded.










KAPM05288-I

KAPM05289-I



The command has finished.


KAPM05293-W No registered information exists.


The command hcmdsradiussecret has started.

The command hcmdsradiussecret has finished.

KAPM05294-E

KAPM05295-E

KAPM05296-W

KAPM05301-E

KAPM05302-E

KAPM05303-E

KAPM05304-I








Register a secret by using the set option, and then re-execute the command. If the same message is output again, acquire the maintenance information, and then contact the Support Center.





No information was displayed when the list option was specified.

Register a secret by using the set option, and then re-execute the command. If the same message is output again, acquire the maintenance information, and then contact the Support Center.

The license has expired.

Use a license key that has not expired.


Output destinations: Destinations for the log.

The system environment is incorrect.


The entered license key is invalid.







Use a regular license key published by the license server.


The acquiring of aa...aa logs started.



Backup of aa...aa started.

KAPM05310-E



The acquiring of aa...aa logs abnormally ended.







8-115

Error Code

KAPM05311-I

KAPM05314-E

KAPM05315-E

KAPM05316-E

KAPM05317-E

KAPM05318-I

KAPM05319-E

KAPM05320-I

KAPM05321-E

KAPM05322-E


The acquiring of aa...aa logs successfully ended.






Backup of aa...aa abnormally ended.


Backup of aa...aa successfully ended.



The specified directory is not empty.




The specified directory name aa...aa is invalid.

aa...aa: Invalid directory name


aa...aa is not registered. bb...bb is available.

aa...aa: Program product name specified in option

bb...bb: Program product name registered in the command


The acquiring of logs successfully ended.

aa...aa



The acquiring of logs abnormally ended.

aa...aa



Backup successfully ended. (aa...aa)



Backup abnormally ended. (aa...aa)



aa...aa does not exist.




Specify an empty directory.


Check the options of the command.

The specified directory name aa...aa is invalid.

Confirm that the specified directory is correct.

aa...aa is not registered. bb...bb is available.

Specify the registered program product name.




Backup successfully ended.

Backup abnormally ended.


aa...aa does not exist.

Confirm that the file exists in the specified directory.



Error Code

KAPM05323-I

KAPM05324-E

KAPM05325-E

KAPM05326-E

KAPM05328-I

KAPM05329-E

KAPM05330-E

KAPM05331-E

KAPM05332-E

KAPM05333-E

KAPM05334-I

KAPM05335-E


Information for restore:

To restore the HiCommand shared repository, specify the "

/enforce

" option.

Before restoring, you have to stop the services "

InterServer

" and "

InterBase

Server

".

Note that the HiCommand shared repository is overwritten with old backup data after the restore.


The privilege is invalid.


Information for restore:

To restore the Hitachi Storage Command

Suite shared repository, specify the

"

/enforce

" option.

Before restoring, you have to stop the services "

InterServer

" and "

InterBase

Server

".

Note that the Hitachi Storage Command

Suite shared repository is overwritten with old backup data after the restore.

An attempt to execute hcmdsras failed.


An attempt to execute jar has failed.


The privilege is invalid.

Execute as a user with execution privilege.

An attempt to execute hcmdsras failed.


An attempt to execute jar has failed.

Make sure that the file name specified in the arc option does not include the pathname. If that is not the problem, contact the Support Center.

The hcmdsbasebackup processing has succeeded.

The hcmdsbasebackup processing has succeeded.


The hcmdsbasebackup processing has failed.












The license key file that was entered could not be found.


The hcmdsbasebackup processing has failed.



Check the options of the command.


Use a license key that has not expired.




Use a regular license key published by the license server.


The license key file that was entered could not be found.

Confirm that the specified path is valid.



8-117

8-118

Error Code

KAPM05336-E

KAPM05337-I

KAPM05390-I

KAPM05402-E

KAPM05403-E

KAPM05405-E

KAPM05406-E

KAPM05407-E

KAPM05410-E

KAPM05411-E

KAPM05413-E

KAPM05414-E


The license key file that was entered is invalid.


The license key that should be entered does not exist in the license key file.


The hcmdsras processing has succeeded.






The license key file that was entered is invalid.

The license key file that was input may be damaged. Contact the Support Center and acquire a new license key file.

The license key that should be entered does not exist in the license key file.

Confirm that the specified license key file is correct.

The hcmdsras processing has succeeded.


Specify all the necessary options.


Specify the option and specify the necessary proceeding values (user name and password, etc.).


Do not specify an unsupported option.


aa...aa: Option



aa...aa: Option





Check the specification of the option.




Confirm that no option that should be specified exclusively is specified at the same time.




Confirm that the file exists, that the file is not in use, and that the make directory of the file is correct.






A fatal structure error was detected in the input XML.




A fatal structure error was detected in the input XML.





KAPM05415-E

KAPM05417-E

KAPM05418-E

KAPM05419-E An unsupported element type was detected in the XML.


KAPM05422-W aa...aa error(s) were detected in the response.

aa...aa: Number of errors


KAPM05423-E

An error occurred during communication processing. (Detail: aa...aa)



An invalid URL was detected. (aa...aa)

aa...aa: URL




KAPM05424-E

KAPM05425-E





The input file contains a grammar mistake.


KAPM05426-E

KAPM05427-E

KAPM05432-E

KAPM05433-E

An error occurred when inputting the file.


The specified value is invalid. value =

aa...aa

aa...aa: Value


Link registration processing has failed.

Processing is interrupted.


The acquisition as a result of registration processing has failed.



An error occurred during communication processing. See the following message

KAPM49001-E for details.


An invalid URL was detected.

Check the specification of the URL.





aa...aa error(s) were detected in the response.







Correct the syntax error in the specified definition file.



The specified value is invalid.

Confirm the value in the user definition application file.

Link registration processing has failed.

Processing is interrupted.


The acquisition as a result of registration processing has failed.




8-119

8-120


KAPM05434-E

KAPM05435-E

KAPM05436-E

KAPM05437-E

I/O of XML has failed.


An error occurred in the SAX parser.


An attempt to analyze the execution result has failed.


The execution result of the XREP processing was null.


KAPM05438-W The "aa...aa" xrep processing result is

bb...bb.

aa...aa: Result of hcmdsxrep command

bb...bb: Result of the command


KAPM05439-E

KAPM05440-E

An attempt to register a link has failed.


An attempt to delete a link has failed.


KAPM05441-W An attempt to check the result has failed.


KAPM05442-E

KAPM05443-E

The registered information was not found.


The table that registers a link does not exist.


KAPM05444-E An error occurred within the server.


KAPM05445-E

KAPM05446-I

An unexpected error occurred within the server.









An attempt to analyze the execution result has failed.


The execution result of the XREP processing was null.


The "aa...aa" xrep processing result is

bb...bb.


An attempt to register a link has failed.


An attempt to delete a link has failed.


An attempt to check the result has failed.


The registered information was not found.


The table that registers a link does not exist.




An unexpected error occurred within the server.






KAPM05501-I Backing up the database to file aa...aa...



KAPM05502-I INTERBASE_PID=aa...aa.

aa...aa: InterBase process ID


KAPM05503-W

The file aa...aa will be overwritten. Is this OK?



KAPM05504-W The HiCommand Server database will be overwritten by this procedure. Is this

OK?


KAPM05505-E

KAPM05506-E

KAPM05507-I

KAPM05508-E

The aa...aa file does not exist or is not readable. The HiCommand Server database was not altered.



The aa...aa file does not exist or is not readable.The HiCommand Server database was not altered.



Restoring the database from the aa...aa file...



The path of the specified database file is invalid.


Backing up the database to file aa...aa.

INTERBASE_PID=aa...aa.

The file aa...aa will be overwritten. Is this

OK?

The continuation will overwrite the

aa...aa.

The Hitachi Storage Command Suite

Common Component database will be overwritten by this procedure. Is this

OK?

The continuation will overwrite the

Hitachi Storage Command Suite Common

Component database.

The aa...aa file does not exist or is not readable. The Hitachi Storage Command

Suite Common Component database was not altered.

Confirm that aa...aa file exists.

Alternatively, check the permission of the

aa...aa file.

The aa...aa file does not exist or is not readable. The Hitachi Storage Command

Suite Common Component database was not altered.

Confirm that the aa...aa file exists.

Restoring the database from the aa...aa file.

The path of the specified database file is invalid.


DATABASE.path

in the



\conf\user.conf

Solaris or Linux:




8-121

Error Code

KAPM05509-E

Error Message

The specified database file was not found.



The specified database file was not found.

Check the value of

DATABASE.path




\conf\user.conf

Solaris or Linux:


An attempt to read to a file has failed.


KAPM05510-E

KAPM05511-E

An attempt to read to a file has failed. file name=aa...aa.







Backup has succeeded. KAPM05512-I Backup succeeded.


KAPM05513-E An attempt to back up has failed.


An attempt to back up has failed.

Take action according to the message output in the window after command execution.

Restoration has succeeded. KAPM05514-I Restoration succeeded.


KAPM05515-E An attempt to restore has failed.


KAPM05516-E

KAPM05530-I

KAPM05531-I

KAPM05532-I

The setup of the specified database is invalid.


An attempt to restore has failed.

Take action according to the message output in the window after command execution.

The setup of the specified database is invalid.

Make sure the setting for the key that the file

DATABASE

starts is correct.



\conf\user.conf

Solaris or Linux:


Backup of the database has started. Backup of the database has started.


Backup of the database has ended.


Restoration of the database has started.


Backup of the database has ended.

Restoration of the database has started.



Error Code

KAPM05533-I

KAPM05534-I

KAPM05535-I

KAPM05536-I

KAPM05537-I

KAPM05538-I

KAPM05539-I

KAPM05540-I

KAPM05541-I

Error Message

Restoration of the database has ended.


The database will now be backed up to file aa...aa.

aa...aa: Backup file


The system area has been damaged. Do you want to recover the system? [y or n]


Please press the Enter key.


Stop the HiRDB service before restoring the database.


Re-creation of the system area has started.


Re-creation of the system area has ended.


Re-creation of the RD area has started.


Re-creation of the RD area has ended.


An attempt to back up the database has failed.



Restoration of the database has ended.

The database will now be backed up to file aa...aa.

The system area has been damaged.

Please select whether to restore this system. Enter not). y

(for yes) or

Please press the Enter key. n

(for do

Stop the HiRDB service before restoring the database.

Re-creation of the system area has started.

Re-creation of the system area has ended.

Re-creation of the RD area has started.

Re-creation of the RD area has ended.

KAPM05544-E

KAPM05545-E An attempt to restore the database has failed.



Make sure that the directory specification is correct. If you cannot solve the problem, collect maintenance information and contact the Support Center.

An attempt to restore the database has failed.


The backed-up version is different from the version in the current environment.

KAPM05546-W The backed-up version is different from the version in the current environment.


KAPM05547-I Do you want to continue and restore the database?


Do you want to continue and restore the database?



8-123

8-124

Error Code

KAPM05548-I

KAPM05550-E

KAPM05551-E

KAPM05559-E

KAPM05560-E

Error Message

Restoration of the database will continue.


The option(s) specified is invalid.


An attempt to execute the aa...aa command has failed.



KAPM05552-E

KAPM05553-E

KAPM05558-E

HiRDB has not been installed.


The RD area of the specified program type could not be found.


KAPM05554-E The aa...aa could not be deleted.



KAPM05555-E

KAPM05556-E

An attempt to set the environment variable has failed.


An attempt to create the backup file has failed.


KAPM05557-E An I/O error occurred.


An attempt to open the archive file has failed.


The backup file format is invalid.


The database location of the specified program type has not been created.



Restoration of the database will continue.


Specify the option correctly.


Make sure that the command specification is correct. If you cannot solve the problem, collect maintenance information and contact the Support

Center.


Make sure that HiRDB has been installed.


Make sure that HiRDB has been set up.

The file aa...aa could not be deleted.

An attempt to set the environment variable has failed.


An attempt to create the backup file has failed.


An I/O error occurred.


An attempt to open the archive file has failed.

Make sure that the file specification is correct. If it is correct but you still cannot solve the problem, collect maintenance information and contact the Support

Center.

The backup file format is invalid.

Specify a valid backup file.


Make sure that the specified application is installed.



Error Code

KAPM05561-I

KAPM05562-E

KAPM05563-I

KAPM05564-E

KAPM05565-I

KAPM05566-E

KAPM05567-E

KAPM05568-E

KAPM05569-E

KAPM05570-I

KAPM05573-E

KAPM05574-E

KAPM05575-E

Error Message

The database was backed up successfully.




The database was completely restored.


An attempt to completely restore the database has failed.


The database was partially restored.


An attempt to partially restore the database has failed.




aa...aa:bb...bb


bb...bb: Message


aa...aa













The database was backed up successfully.


The database was completely restored.

An attempt to completely restore the database has failed.

The database was partially restored.

An attempt to partially restore the database has failed.



Message for debugging.







Center.


Confirm that HiRDB has already installed.



8-125

8-126

Error Code

KAPM05576-E

KAPM05577-E

KAPM05578-E

KAPM05579-E

KAPM05580-I

KAPM05581-I

KAPM05586-I

KAPM05587-I

KAPM05588-I

KAPM05589-I

Error Message



An attempt to clear an HiRDB environment variable has failed.






Re-creation of the database has started.


Re-creation of the database has ended.




Confirm that HiRDB has already set up.




Make sure that the specified application is installed.



Re-creation of the database has started.

Re-creation of the database has ended.

Unsetup of aa...aa has started.



Unsetup of aa...aa has ended.



Setup of aa...aa has started.



Setup of aa...aa has ended.



Execution of the aa...aa command has started.



Execution of the aa...aa command ended normally.



Backup of the parameter definition file has ended.


The backup file of the parameter definition file has been deleted.


Execution of the aa...aa command has started.


Backup of the parameter definition file has ended.

The backup file of the parameter definition file has been deleted.



Error Code

KAPM05590-E

KAPM05591-E

KAPM05592-E

KAPM05596-E

KAPM05597-E

KAPM05598-E

KAPM05599-E

KAPM05601-I

KAPM05602-I

Error Message











Center.

HiRDB has not been set up.

Confirm that HiRDB has already set up.

HiRDB has not been set up.






The aa...aa file was not found.

Make sure that HiRDB has been set up. If you cannot solve the problem, collect maintenance information and contact the

Support Center.

The aa...aa file could not be read.

Make sure that HiRDB has been set up. If you cannot solve the problem, collect maintenance information and contact the

Support Center.

The aa...aa folder could not be deleted.


aa...aa: Folder name


An SQL exception occurred.


An attempt to clear the HiRDB system environment variables has failed.




aa...aa:bb...bb


bb...bb: Message


The acquisition of HiRDB detail logs has started.


The acquisition of HiRDB detail logs was successful.



Check whether HiRDB is running. If it is, collect maintenance information, and contact the Support Center.

An attempt to clear the HiRDB system environment variables has failed.





The acquisition of HiRDB detail logs has started.

The acquisition of HiRDB detail logs was successful.



8-127

Error Code

KAPM05603-I

KAPM05604-I

KAPM05605-I

KAPM05606-I

KAPM05607-E

KAPM05608-E

KAPM05609-E

KAPM05610-I

KAPM05611-E

KAPM05612-E

Error Message

The acquisition of the HiRDB RDAREA has started.


The acquisition of the HiRDB RDAREA was successful.


The acquisition of the table data has started.


The acquisition of the table data was successful.


The command aa...aa is executing in another process.




The acquisition of the HiRDB RDAREA has started.

The acquisition of the HiRDB RDAREA was successful.

The acquisition of the table data has started.

The acquisition of the table data was successful.

The wait for the end of the command




The command aa...aa timed out and ended.



The command is executing in another process.

After the command executing in the other process finishes, re-execute the command.

The wait for the end of the command executing in another process has failed.

Re-execute the command. If this does not resolve the problem, collect maintenance information, and then contact the Support Center.

The command executing in another process timed out.


The specified product is a version for which registration data can be moved.

(This was determined by comparing the versions of the specified product and the product to be installed.)

The specified product is a version for which registration data can be moved.



The specified product is a version for which registration data cannot be moved. (This was determined by comparing the versions of the specified product and the product to be installed.)


The version of the specified product could not be acquired. (product name =

aa...aa)



The specified product is a version for which registration data cannot be moved.



An attempt to execute the version acquisition function has failed.




Error Code

KAPM05613-E

KAPM05614-E

KAPM05615-E

KAPM05616-E

KAPM05617-E

KAPM05618-I

KAPM05619-I

KAPM05620-I

KAPM05621-E

KAPM05622-E

KAPM05623-E

KAPM05624-E


The format of the version number file for the specified product is invalid.


The specified product is not installed.

(product name = aa...aa)



An internal error occurred: aa...aa

aa...aa: Detailed message


The number of specified options is invalid.


The contents of the version file are invalid.


The hcmdsppcheck started.

command has


The hcmdsppcheck

command has ended.


The hcmdsppvrs successful.

command was


The hcmdsppvrs command failed.


The format of the version number file for the specified product is invalid.


The product specified by the version check command is not installed.


An internal error occurred. A detailed message to pinpoint the cause is displayed in the log.


The number of options to specify in the version check function is invalid.


The version number file contains characters that are not numbers.


The version check function has started.

The version check function has ended.

The version acquisition function was successful.

Initialization of the log failed.


An attempt to assign memory to store the log file path has failed.


An attempt to acquire the installation path has failed.


An attempt to execute the version acquisition function has failed.










8-129

Error Code

KAPM05625-E

KAPM05626-E

KAPM05627-E

Error Message

The product names do not match.




There is no version number file.



The product name specified by the version check function does not match the registered product name.


The product name that must be specified by the version check function is not specified.


There is no version number file in the location specified by the version check function.


Upgrade permission file already exists. KAPM05628-I

KAPM05629-E

KAPM05630-E

A file already exists at the specified output destination.


A folder already exists at the specified output destination.


There is no registry key for HBase.


KAPM05640-I

The user ID and password were changed successfully.


KAPM05641-I

KAPM05642-W Neither the user ID nor the password was changed.


KAPM05643-E

There is no password file to reference.


The format of the password file is invalid.


KAPM05644-E An attempt to change the user ID and password has failed.


A folder already exists at the output destination specified by the version check function.

After deleting the output destination folder, re-execute the command, or specify an empty directory.

There is no registry key for Hitachi

Storage Command Suite Common

Component.


The specified user ID and password were changed successfully.

The password file that writes the user ID and password was not found.

The specified user ID and password are the same as before.

Specify a new (different) ID and password.

The password file might have been corrupted.

Collect the maintenance information, and then contact the Support Center.

An attempt to change the specified user

ID and password failed because an error occurred.

Check the preceding log.



Error Code

KAPM05645-E

KAPM05646-E

KAPM05647-E

KAPM05648-E

KAPM05649-E

KAPM05650-E

KAPM05654-E

KAPM05655-E

KAPM05656-E

KAPM05657-I

KAPM05658-I

KAPM05659-E

Error Message



The specified argument contains an invalid character.


An attempt to acquire the HiCommand


Component installation path has failed.








An attempt to output the password file has failed.


The character string specified by the option is too long.


The character string specified by the option is too short.


The hcmdschangeaccount started.

command has


The hcmdschangeaccount ended.

command has


The program product specified by the type option is invalid.



Please make sure the specification of the option is correct.

Specify the option correctly, and execute the command again.

An invalid character was specified in the option.

Enter valid characters only.

An attempt to acquire the Hitachi


Component installation path has failed.








An error occurred during processing to write to the password file.


The character string specified by the option exceeds the maximum number of characters.

Enter a character string that is within the maximum number of characters.

The length of the character string specified by the option is less than the minimum number of characters. Enter a character string that is at least the minimum number of characters.

The hcmdschangeaccount started.

command has

The hcmdschangeaccount ended.

command has

The value specified for the type option is invalid.

Enter a correct value.



8-131

8-132

Error Code

KAPM05660-E

KAPM05661-E

KAPM05662-E

KAPM05663-E

KAPM05672-I

KAPM05673-E

KAPM05674-E

KAPM05675-E

KAPM05676-E

KAPM05677-E

KAPM05678-I

KAPM05679-E

KAPM05680-E

The user ID specified by the newid option is invalid.


The password specified by the newpass option is invalid.






The memory size was changed successfully.


An attempt to change the memory size has failed.


A fatal error occurred during processing.


The service is running.


In a Windows x32 environment, the memory size cannot be changed to

Large.

Error Message




The current memory size is aa...aa.

aa...aa: Memory size


The current memory size is unknown.





The value specified for the newid option is invalid.


The value specified for the newpass option is invalid.


An error occurred during processing to load the password file.



Please execute it again after changing the user name.

The memory size was changed successfully.

An attempt to change the memory size has failed.

Check the message output before or after this message, and take action appropriate to that message.



The service is running.

Stop the service, and then execute the command again.

In a Windows x32 environment, the memory size cannot be changed to

Large.

Specify a valid option to execute the command.



The current memory size is displayed.

The current memory size is unknown.

Use the hcmdschgheap command to reset the memory size.





Error Code

KAPM05681-E

KAPM05682-E

KAPM05683-E

KAPM05684-E

KAPM05685-E

KAPM05686-E

KAPM05687-I

KAPM05688-E

KAPM05689-E

KAPM05690-E

KAPM05691-E

KAPM05699-E

Error Message

An entered argument is invalid.


The specified options are insufficient.


The value specified for an option is invalid. (option = aa...aa)

aa...aa: Option


The specified value is invalid. (value =

aa...aa)

aa...aa: Value


The hcmds.home value cannot be acquired.


An attempt to load the file has failed.

(file = aa...aa)





Execution of the hcmdsweb command has failed.


Execution of the hcmdsweb2 command has failed.


In Windows x86 version, you cannot specify Large.


Command execution failed because services were running.





An entered argument is invalid.

Specify an appropriate argument.

A necessary option is not specified.

Specify a valid option, and then try again.

The value specified for an option is invalid. (option = aa...aa)

Check the value specified for the option.

The specified value is invalid. (value = aa...aa)

Specify an appropriate value.




(file = aa...aa)



Execution of the hcmdsweb command has failed.


Execution of the hcmdsweb2 command has failed.


In Windows x86 version, you cannot specify Large.


Command execution failed because services were running.

Stop all Suite products, Single Sign On

Server, and Common Web Service, and then re-execute the command.





8-133


KAPM05802-E

KAPM05803-E

KAPM05804-E

KAPM05805-E

KAPM05806-E



The specified arguments are insufficient.


The specified value of option is invalid.

(Option = aa...aa)

aa...aa: Option name


The specified directory cannot be created. (directory = aa...aa)



The specified directory name already existed as a file. (file = aa...aa)



KAPM05807-E


aa...aa)

aa...aa: Specified value


KAPM05808-E The aa...aa does not exist.





KAPM05810-E The aa...aa already exists.



KAPM05811-E

Command aa...aa returns value bb...bb.

The error message is cc...cc.


bb...bb: Return code

cc...cc: Error message






Specify a valid value.

The file aa...aa does not exist.



The specified value of option is invalid.

Check the specified value of the option.

The specified directory cannot be created.

Make sure that you have write permission for the directory.

The specified directory name already existed as a file.

Specify another directory name.

Make sure that the file specification is correct. If you cannot solve the problem, collect maintenance information and contact the Support Center.

The directory aa...aa does not exist.


The file aa...aa already exists.

Delete the file, or move to another directory.

Command aa...aa returns value bb...bb.

The error message is cc...cc.

Check the specified value of the option. If you cannot solve the problem, collect maintenance information and contact the

Support Center.



Error Code

KAPM05812-I

KAPM05813-E

KAPM05814-E

KAPM05815-E

KAPM05816-E

KAPM05817-E

KAPM05818-I

KAPM05819-I

KAPM05820-I

KAPM05821-I

KAPM05822-I

KAPM05823-E




An IOException occurred. (details =

aa...aa)

aa...aa: Exception details


An exception occurred. (details =

aa...aa)



A NullPointerException occurred. (details

= aa...aa)



An error occurred while executing the hcmdsauthmode command.


There is no RD area in the system.







A NullPointerException occurred.


An error occurred while executing the hcmdsauthmode command.



Make sure that the Hitachi Storage

Command Suite product has been installed.

The hcmdsauthmove command has started.

The hcmdsauthmove command has started.


Processing to import data has started.


Processing to import data has ended.


Processing to export data has started.


Processing to export data has ended.


HiRDB has not started.







Start HiRDB.

The directory aa...aa already exists.

Specify another directory. aa...aa: Directory name




8-135

8-136

Error Code

KAPM05825-E

KAPM05826-E

KAPM05827-E

KAPM05828-E

KAPM05829-E

KAPM05830-E

KAPM05831-E

KAPM05832-I

KAPM05833-E

KAPM05834-I

KAPM05835-E

KAPM05836-E


An HSSOException occurred. (details =

aa...aa)



A CIMException occurred. (details =

aa...aa)




(directory name = aa...aa)



An attempt to execute the hcmdsauthmove command has failed.






An attempt to execute SQL has failed.


The authentication data was backed up successfully.


An attempt to back up the authentication data has failed.


The authentication data was restored successfully.


An attempt to restore the authentication data has failed.


An attempt to acquire the physical table name has failed. (table name = aa...aa)








Specify an empty directory.

An attempt to execute the hcmdsauthmove command has failed.








The authentication data was backed up successfully.

An attempt to back up the authentication data has failed.

The authentication data was restored successfully.

An attempt to restore the authentication data has failed.

The physical table name was not requested from the logical table name.

Make sure the DBMS has started, and then re-execute. If you cannot solve the problem, collect the maintenance information, and then contact the

Support Center.




KAPM05837-W

The column data exceeds 80 characters.

(column data = aa...aa)

aa...aa: Column data


KAPM05838-E

KAPM05840-E

An attempt to execute the SQL has failed. (SQL = aa...aa, error code =

bb...bb)

aa...aa: Executed SQL statement





KAPM05841-E

KAPM05842-I

KAPM05843-E

KAPM05844-E

KAPM05845-E

KAPM05846-E

KAPM05850-E


The column data of the TNB_AccountUser table could not be reduced to within 80 characters.

An attempt to execute the SQL has failed.


The option is invalid. Code = [aa...aa],

Data = [bb...bb]

aa...aa: Generated code

bb...bb: Generated option and value

Output destinations: Destinations for output level 10. hcmdsbanner

[aa...aa]{,[bb...bb],......[.....]}

aa...aa: Command line argument

bb...bb: Command line argument


The message file does not exist.



Specify correct options, and then reexecute the command.



The options specified for the command will be displayed.

The path specified for the message file is not a file.


The message exceeded 1000 characters.


The path specified in the aa...aa option is not an absolute path.

aa...aa: Option


An attempt to set the banner message display has failed.


The message file specified in the " file

" option does not exist.

Please specify the correct file, and then execute the command.

The path of the message file specified in the " file

" option is not a file.

Please specify the correct file, and then execute the command.

The message of the message file specified in the "file" option exceeded

1,000 characters.

Please keep the message to 1,000 characters or less.


Specify the absolute path, then retry.

An attempt to set the banner message has failed.




8-137


KAPM05851-E

An attempt to set the banner message display has failed. File = [aa...aa], Code

= [bb...bb]

aa...aa: File or directory

bb...bb: Generated code


KAPM05852-I Setting of the banner message display has been completed.


KAPM05860-W The banner message display has already been cancelled.



An attempt to set the banner message has failed.


The setting of the banner message has been completed.

The banner message has already been deleted.



Error Code

KAPM05861-E

KAPM05862-E

KAPM05863-I

KAPM05876-E

KAPM05879-E

KAPM05880-E

KAPM05881-E

KAPM05882-E

KAPM05883-E

KAPM05884-E

KAPM05885-E


An attempt to cancel the banner message display has failed.


An attempt to cancel the banner message display has failed. File =

[aa...aa], Code = [bb...bb]

aa...aa: File or directory

bb...bb: Generated code


Cancellation of the banner message display has been completed.




aa...aa

aa...aa: Information for debugging


The value of EXCurrentVersion is invalid.


EXCurrentVersion does not exist.


The registry key that must be acquired does not exist.




The version management file is invalid


The version management file that must be acquired does not exist.


An attempt to delete the banner message has failed.


An attempt to delete the banner message has failed.


The banner message has been released.



Information for debugging.

The value of EXCurrentVersion is invalid.


EXCurrentVersion does not exist.






The version management file is invalid


The version management file that must be acquired does not exist.




8-139

Error Code

KAPM05886-E

KAPM05887-I

KAPM05890-I

KAPM05891-E

KAPM05892-I

KAPM05893-I

KAPM05894-E

KAPM05895-E

KAPM05896-E

KAPM05897-E

KAPM05898-E

KAPM05899-E

Error Message

An attempt to acquire the version has failed.




Please make sure the product has been correctly installed.

If it has been correctly installed, acquire the maintenance information, and then contact the Support Center.

The processing of the version acquisition function was succeeded.

The hcmdsvrsutil utility was successful.


The hcmdsbasevrs successful.

command was


The sub-key that shows the version does not exist.


The hcmdsbasevrs started.

command has


The hcmdsbasevrs

command has ended.










An attempt to create the log file path has failed.


There is no registry key for HBase.


The version display function was successful.



The version display function has started.

The version display function has ended.









An attempt to create the log file path has failed.


There is no registry key for Hitachi


Component.




Error Code

KAPM05900-I

KAPM05901-I

KAPM05902-E

KAPM05903-E

KAPM05904-I

KAPM05905-E

KAPM05909-E

KAPM05910-E

Error Message

The hcmdsdbtrans started.

command has


The hcmdsdbtrans normally.

command ended





The hcmdsdbtrans


The hcmdsdbtrans normally.

command ended

An option is invalid. Code=[aa...aa],

Data=[bb...bb]

aa...aa: Code indicating generation location

bb...bb: Generated option and value

Output destinations: Destinations for output level 10. hcmdsdbtrans

[aa...aa]{,[bb...bb],......[.....]}

aa...aa: Command line argument

bb...bb: Command line argument



aa...aa: Option




An attempt to acquire the version of








The options specified for the command are displayed.


Specify the absolute path, then retry.



An attempt to acquire the version of the installed aa...aa failed.

Make sure that the products have been properly installed, and if necessary, take actions to satisfy this condition. If an error still occurs after taking the above actions, collect maintenance information, and then contact Customer Support.



8-141

Error Code

KAPM05911-E

KAPM05912-I

KAPM05913-E

KAPM05914-E

KAPM05915-E

KAPM05916-E

KAPM05920-E

Error Message

aa...aa is a version that cannot be registered.




The aa...aa data in the registration data cannot be registered because the data cannot be used with the installed aa...aa version.

Change the installed aa...aa version to the version used when the registration data was created, or to a version for which the registration data can be moved.

If operation is possible without registering the aa...aa data, exclude this data and register the data for the other products.

aa...aa cannot be registered because it is not installed.

If the aa...aa data is necessary, install

aa...aa, and then re-execute the command.

aa...aa cannot be registered because it is not installed.



Processing to register aa...aa will stop because it is not installed.



Processing to register aa...aa will stop because it is not in the registration data.



Processing to register data will stop because aa...aa, specified in the type option, is not installed.

If registration of aa...aa is necessary, install aa...aa and then re-execute the command.

If operation is possible without registering the aa...aa data, exclude this data and register the data for the other products.

Processing to register data will stop because aa...aa, specified in the type option, is not in the registration data.

Use the type option to specify only the products that are included in the archive file or in the directory specified by the workpath option.

An attempt was made to register primary server data into the secondary server.

Check the data to be imported.

An attempt was made to register primary server data into the secondary server.


An attempt was made to register secondary server data into the primary server.


The archive file specification is incorrect.


An attempt was made to register secondary server data into the primary server.

Check the data to be imported and the setting of the server to which the data is to be imported.

The archive file name specified in the file option is incorrect.

Revise the path specified in the command option.



Error Code

KAPM05921-E

KAPM05922-E

KAPM05923-E

KAPM05924-E

KAPM05925-E

KAPM05926-E

Error Message

An attempt to extract the archive file has failed.


An attempt to create an archive file has failed.


An archive file cannot be created because the data exceeds 2 GB.


The work directory specification is incorrect.


The work directory is not empty.


The format of the registration data in the work directory is incorrect.



An attempt to extract the archive file specified in the file option has failed.

Make sure the following conditions are satisfied, and if necessary, take actions to satisfy them:



The capacity of the disk used for the directory specified by the workpath option is sufficient.



The archive file is for the hcmdsdbtrans

command.

If an error still occurs after taking the above actions, collect maintenance information, and then contact Customer

Support.

An attempt to create an archive file has failed.

Make sure that you secure sufficient space in the disk that is to store the archive file. If an error still occurs even after securing the disk space, collect maintenance information, and then contact Customer Support.

An archive file cannot be created because the data exceeds 2 GB.

Instead of the archive file, transfer the data stored in the directory specified by the workpath option to the migration destination server.

The work directory specification is incorrect.

Revise the path specified in the workpath option.

The work directory is not empty.

Specify an empty directory or uncreated directory as the work directory.

A file or directory required by the hcmdsdbtrans

command is not in the work directory specified by the workpath option.



When the file option is specified

Check whether the specified file is the archive file for the hcmdsdbtrans command.

When the file option is not specified



Check whether all the contents of the directory specified by the workpath option when exporting are stored in the directory specified by the workpath option.

If an error still occurs after taking the above actions, collect maintenance information, and then contact Customer

Support.



8-143

Error Code

KAPM05927-E

KAPM05928-E

Error Message

DBMS is not running.


DBMS is not set up.



Data I/O cannot be performed because the DBMS is not running.

Start the DBMS by using the hcmdsdbsrv command.

Data I/O cannot be performed because the DBMS is not set up.

Make sure the installation status of the product is correct.

An attempt to delete a file or directory made in the work directory has failed.

Please delete the work directory.

KAPM05929-W An attempt to delete the work directory has failed.


KAPM05930-I aa...aa will now be exported.

aa...aa: "The application data" or "The authentication data"


KAPM05931-I

KAPM05932-I

KAPM05933-I

aa...aa has been exported.



aa...aa has been deleted from the authentication data.



The archive file will now be created.


KAPM05934-I

KAPM05935-I

KAPM05936-I

KAPM05937-I

The archive file has been created.


The archive file will now be extracted.


The archive file has been extracted.


aa...aa will now be imported.



aa...aa will now be exported.

aa...aa has been exported.

aa...aa has been deleted from the authentication data.

The archive file will now be created.

The archive file has been created.

The archive file will now be extracted.

The archive file has been extracted.

aa...aa will now be imported.



Error Code

KAPM05938-I

KAPM05939-E

KAPM05950-E

KAPM05951-E

KAPM05952-E

KAPM05953-I

KAPM05954-E

KAPM05955-E

KAPM05956-E

KAPM05957-E

Error Message

aa...aa has been imported.



aa...aa

aa...aa: Details from the time of the error


The specified product is not supported.



aa...aa has been imported.

See the preceding detailed error message.

Take action according to the preceding message.





The product specified by the version acquisition function is not supported.


There is no sub-key that indicates the version.



The product specified by the version acquisition function is not installed.

Please install the product specified by the option.

The processing of the version acquisition function succeeded.

The processing of the hcmdsvrsutil library succeeded.






The processing of the hcmdsvrsutil library failed.


There is no registry key for the specified product.



Please specify the product name, and then re-execute the command.


Please specify the correct product name, and then re-execute the command.

The processing of the version acquisition function failed.


There is no registry key for the product specified by the version acquisition function.





8-145

8-146

Error Code

KAPM05958-E

KAPM05959-E

KAPM05970-I

KAPM05971-E

KAPM05972-E

KAPM05973-I

KAPM05974-I

KAPM05975-E

KAPM05976-E

KAPM05977-E

KAPM05978-E

Error Message

An attempt to acquire the sub-key that shows the version of the specified product has failed.


The file that stores the installation path is invalid.


The hcmdsppvrs successful.

command was



(product name = aa...aa)



An attempt to acquire version information for the specified product has failed.


The hcmdsppvrs



The hcmdsppvrs

command has ended.




Log initialization failed.


Initialization of the installation path has failed.





There is no sub-key that indicates the version of the product specified by the version acquisition function.



The file that stores the installation path is invalid.


The version acquisition function was successful.

The product specified by the version acquisition function is not installed.

Please install the specified product.

The version of the product specified by the version acquisition function could not be acquired.



The version acquisition function started.

The version acquisition function ended.





Initialization of the installation path failed.






Error Code

KAPM05979-E

KAPM05980-E

Error Message

The number of specified options is invalid.


A file already exists at the specified output destination.


KAPM05981-E A folder already exists at the specified output destination.


KAPM05982-E The file-creation function failed.


KAPM05983-E The file-writing function failed.


KAPM05984-I

KAPM05985-E

The version was successfully acquired.

(product name = aa...aa, version =

bb...bb)


bb...bb: Version


An attempt to acquire the version has failed. (product name = aa...aa)



KAPM05986-E A fatal error occurred: aa...aa

aa...aa: Detailed message


KAPM05987-I The processing of the hcmdsvrsutil library succeeded.



The number of options specified by the version acquisition function is invalid.


The file already exists at the output destination specified by the version acquisition function.


The folder already exists at the output destination specified by the version acquisition function.


The function that creates the file for writing the version value failed.


The function that writes the version value to the file failed.


The version acquisition was successful.




A fatal error occurred. A detailed message showing the cause is output.

Make sure the specified product is supported. If it is supported, the specified product name might be incorrect; so enter the correct product name, and then re-execute the command.

The processing of the version acquisition function succeeded.



8-147

8-148

Error Code

KAPM05988-E

Error Message

The processing of the hcmdsvrsutil library failed. (RTN = aa...aa, message

= bb...bb)

aa...aa: Version acquisition function return code

bb...bb: Version acquisition function error message



The processing of the version acquisition function failed.


Fatal error.


Updating of the database has started. KAPM06001-I

KAPM06002-I

KAPM06003-I

KAPM06004-I

KAPM06005-I

KAPM06006-I

KAPM06007-I

KAPM06008-E

KAPM06009-I

KAPM06010-E


Updating of the database has started.


The database was updated from 01-00 to 01-01.


The database need not be updated to

01-01.


The database updating from 01-01 to

03-00 has started.


The database was updated from 01-01 to 03-00.


The database need not be updated to

03-00.


The database is already updated.


Updating of the database abnormally ended.


Updating of the database has ended.


An attempt to backup of the database has failed.


The database was updated from 01-00 to

01-01.

The database does not need to be updated to 01-01.

The database updating from 01-01 to 03-

00 has started.

The database was updated from 01-01 to

03-00.

The database does not need updating to

03-00.

The database is already updated.

Updating of the database has abnormally ended.


Updating of the database has ended.

An attempt to backup the database has failed.




Error Code

KAPM06011-E

KAPM06012-I

KAPM06013-I

KAPM06015-E

KAPM06016-E

KAPM06017-E

KAPM06018-E

KAPM06019-E

KAPM06020-E

Error Message

An attempt to restore of the database has failed.


The database does not need to be updated to aa...aa.

aa...aa: Version


The database has been updated from

aa...aa to bb...bb.

aa...aa: Old version

bb...bb: New version


An attempt to change the database meta definition has failed.





The database does not need to be updated to aa...aa.

The database has been updated from

aa...aa to bb...bb.

The version of the database to be upgraded is unknown.


The current database version could not be obtained.


An attempt to acquire the connection has failed.


An attempt to set up the auto-commit function has failed.


An attempt to create the lock table has failed.


An attempt to change the database meta definition has failed.

Confirm that InterBase has started. If it has started, collect maintenance information, and contact the Support

Center.

The version of the database to be upgraded is unknown.


The current database version could not be obtained.


Center.

An attempt to acquire the connection has failed.


Center.

An attempt to set up the auto-commit function has failed.


Center.

An attempt to create the lock table has failed.


Center.



8-149

Error Code

KAPM06021-E

KAPM06022-E

KAPM06023-E

KAPM06024-E

KAPM06025-E

KAPM06026-E

KAPM06027-I

KAPM06028-E

KAPM06029-E

KAPM06030-E

Error Message





An attempt to update the version of the database version table has failed.


An error occurred during an attempt to read a file.


An attempt to acquire the database version has failed.


An attempt to upgrade the database has failed.




An attempt to set up the environment has failed. (system property name =

aa...aa)

aa...aa: System property name


Database is not running.


Disk capacity is insufficient.





Center.



Center.

An attempt to update the version of the database version table has failed.


Center.

An error occurred during an attempt to read a file.




Center.



Center.


An attempt to set up the environment has failed.



Please start HiRDB.

Disk capacity is insufficient.

Restore the repository from the backup file, increase the database capacity, and then re-execute.



Error Code

KAPM06031-E

KAPM06032-E

KAPM06033-E

KAPM06034-E

KAPM06035-E

KAPM06036-E

KAPM06037-I

KAPM06038-E

KAPM06039-E

KAPM06040-E

KAPM06041-E

Error Message





The current database version is incorrect.


Exclusion control of a TNB_DBVersion table has failed.


The access class of a database could not be found.


Access of a database has failed.


The database has been update from version aa...aa to bb...bb.

aa...aa: version

bb...bb: version


An attempt to acquire the user names of users who access the database has failed.


The version of the target database is unknown.








Restore the repository from the backup file, and then re-execute. If the problem cannot be resolved even after reexecution, collect maintenance information and contact the Support

Center.



The current database version is incorrect.


Exclusion control of a TNB_DBVersion table has failed.


The access class of a database could not be found.


Access of a database has failed.


The database has been update from version aa...aa to bb...bb.

An attempt to acquire the user names of users who access the database has failed.


The version of the target database is unknown.








8-151


KAPM06042-W

The SQL will be disregarded. (SQL =

aa...aa, error code = bb...bb)




KAPM06043-E An attempt to perform a rollback has failed.



This message is displayed when the executed SQL statement is to be disregarded during processing to upgrade the database version.

KAPM06044-E

KAPM06045-I

KAPM06046-I

KAPM06047-I

KAPM06048-E

The version upgrade definition file is invalid.


The SQL will now be executed. (SQL =

aa...aa)

aa...aa: SQL statement


Processing to upgrade the database version started. (version = aa...aa)

aa...aa: Database version


Processing to upgrade the database version ended. (version = aa...aa)

aa...aa: Database version


An attempt to execute the SQL has failed. (SQL = aa...aa, error code =

bb...bb)




KAPM06049-E

KAPM06100-I



The hcmdschgurl command started.


This message is displayed when an attempt to perform a rollback during processing to upgrade the database version has failed.


Support Center.

The version upgrade definition file is invalid.


This message is displayed when the SQL statement is to be executed during processing to upgrade the database version.

Processing to upgrade the database version started.

Processing to upgrade the database version ended.

This message is displayed when an attempt to execute the SQL during processing to upgrade the database version has failed.


Support Center.



The hcmdschgurl command started.



Error Code

KAPM06101-I

KAPM06102-E

KAPM06103-I

KAPM06104-E

KAPM06105-I

KAPM06106-E

KAPM06111-I

KAPM06112-E

KAPM06113-E

KAPM06114-E

KAPM06115-E

Error Message

The hcmdschgurl command successfully ended.


The hcmdschgurl command abnormally ended.


An attempt to back up the database has succeeded.




An attempt to restore the database has succeeded.




The URL was changed from "aa...aa" to

"bb...bb".

aa...aa: Old URL

bb...bb: New URL


The specified URL before the change is invalid. URL = "aa...aa"

aa...aa: URL


The specified URL after the change is invalid. URL = "aa...aa"

aa...aa: URL


An attempt to connect to the database has failed.





The hcmdschgurl command successfully ended.

The hcmdschgurl command abnormally ended.


An attempt to back up the database has succeeded.



An attempt to restore the database has succeeded.



The URL was changed from "aa...aa" to

"bb...bb".

The specified URL before the change is invalid.

Confirm that the URL is valid.

The specified URL after the change is invalid.


An attempt to connect to the database has failed.

Confirm that the InterBase or the

InterClient service is running.


Confirm that the option is valid.



8-153


KAPM06116-E

KAPM06117-E

CIMException occurred. Description =

"aa...aa"







KAPM06118-E The BaseURL column does not exist in the class. class name = "aa...aa"



KAPM06119-W

The specified URL does not exist in the class. URL = "aa...aa"

aa...aa: URL


KAPM06120-I The URL is not registered.


KAPM06121-E IllegalDataException occurred.


aa...aa: Details


KAPM06122-W The specified URL before the change and after the change are same.


KAPM06123-W The program product specified by the type option is invalid.


KAPM06130-I

KAPM06131-I

The hcmdsinitsetup command has started.


The hcmdsinitsetup command was successful.


KAPM06132-E The hcmdsinitsetup command has failed.


CIMException occurred.




The BaseURL column does not exist in the class.


The specified URL does not exist in the class.


The URL is not registered.

IllegalDataException occurred.


The specified URL before the change and after the change are same.


The value specified for the type option is invalid.


The hcmdsinitsetup command has started.

The hcmdsinitsetup command was successful.

The hcmdsinitsetup command has failed.



Error Code

KAPM06138-E

KAPM06139-E

KAPM06140-E

KAPM06141-E

KAPM06142-E

KAPM06143-E

KAPM06144-E

KAPM06146-E

KAPM06147-E

KAPM06149-E

KAPM06153-E

KAPM06154-E

KAPM06159-E


A required database path is missing.


An error occurred during a parameter check.


Memory is insufficient.


The HiRDB environment already exists.


Free disk space is insufficient.


An error occurred in the system definition entry file.


The port is already being used.


A required database path is missing.



Check the memory capacity for the operation environment. If necessary, increase the memory.

The HiRDB environment already exists.



Check the disk capacity for the operation environment. If necessary, free some disk area.





Other errors.


An attempt to create the file has failed.


An attempt to create the file has failed.


An attempt to write to the file has failed.


An attempt to delete the file has failed.


An attempt to execute the command has failed.




An attempt to acquire a cluster configuration file has failed.







An attempt to acquire a cluster configuration file has failed.

Check the cluster configuration file.



8-155

8-156

Error Code

KAPM06160-E

KAPM06161-E

KAPM06162-E

KAPM06163-E

KAPM06164-E

KAPM06165-E

KAPM06166-E

KAPM06169-E

KAPM06170-I

Error Message

The value of hcmds.home cannot be acquired.


The cluster configuration file was not found.


An attempt to acquire the key name has failed.


An attempt to acquire a value has failed.





(file = "aa...aa")



An attempt to register the authentication data has failed.


An attempt to log in as an internal user has failed.


The hcmdsdbstatus started.

command has




The cluster configuration file was not found.









See the next message.

An attempt to register the authentication data has failed.

If this message is displayed following the

KAPM06111-I message when the hcmdschgurl

command is executed, information was successfully registered into the local repository of the distributed environment, but the registered information in the remote machine has not been applied.

To apply the registered information in the remote machine, either start or restart the Single Sign On Server for the remote machine.

If you cannot resolve the problem even by doing this, check the network connection and settings.

If you still cannot resolve the problem, acquire the maintenance information, and then contact the Support Center.

An attempt to log in as an internal user has failed.

See the next message.

The


hcmdsdbstatus started.

command has



Error Code

KAPM06171-I

KAPM06172-I

KAPM06173-E

KAPM06176-I

KAPM06177-I

KAPM06178-I

KAPM06179-E

KAPM06180-E

KAPM06181-E

KAPM06182-E

KAPM06183-I

KAPM06184-E

KAPM06185-E


The hcmdsdbstatus ended.

command has


The hcmdsdbstatus successful.

command was


The hcmdsdbstatus

command has failed.


The DBMS is running.


The DBMS is now starting or shutting down.


The DBMS service has stopped.


The DBMS restart was interrupted.


The DBMS service has stopped or does not exist.


The database has not been set up.




Command execution results: "aa...aa"

aa...aa: Displayed output of the executed command






The hcmdsdbstatus terminated.

command has

The hcmdsdbstatus successful.

command was

The hcmdsdbstatus

command has failed.


The DBMS is running.

The DBMS is now starting or shutting down.

The DBMS stopped.

The restart of the DBMS was interrupted.


The DBMS service has stopped or does not exist.


The database has not been set up.




Execution result of command.

The execution of the command failed.






8-157

Error Code

KAPM06186-E

Error Message

The value of acquired. hcmds.home

could not be


KAPM06187-E

KAPM06203-E

KAPM06206-E

KAPM06207-E

An attempt to judge the DBMS status has failed.


The list of table name is empty.


An unexpected error occurred during

InterBase processing.


The list of table names is empty.


KAPM06214-E

KAPM06215-E

KAPM06216-E

KAPM06217-E

KAPM06218-E

KAPM06219-E



InterBaseServer is not running.


InterServer is not running.


An argument contains a null value.




The specified directory cannot be created. (directory = aa...aa).



The specified directory name already exists as a file. (file = aa...aa)





cannot be


An attempt to judge the DBMS status has failed.


The list of table name is empty.


An unexpected error occurred during

InterBase processing.


The list of table names is empty.


A table aa...aa has been created.

InterBaseServer is not running.

Make sure that InterBaseServer is running.

InterServer is not running.

Make sure that InterServer is running.







The specified directory name already exists as a file.




Error Code

KAPM06220-E

KAPM06221-E

KAPM06222-E

KAPM06223-E

KAPM06224-E

KAPM06226-E

KAPM06227-I

KAPM06228-E

KAPM06229-E

KAPM06230-E


The specified file name already exists as a directory. (directory = aa...aa )



The specified database file (aa...aa ) does not exist.

aa...aa: Database file name


The specified XML file (aa...aa) does not exist.

aa...aa: XML file name



aa...aa)

aa...aa: Value




The specified file (aa...aa) does not exist in the argument of the pdload command.

aa...aa: Name of non-existent file


The processing on table aa...aa finished successfully.



The CSV file (aa...aa) contains an invalid line.



An attempt to read the data from table




An unexpected return value (aa...aa) was returned from the pdload command.

aa...aa: Unexpected return value


The specified file name already exists as a directory.


The specified database file (aa...aa ) does not exist.


The specified XML file (aa...aa) does not exist.






The specified file (aa...aa) does not exist in the argument of the pdload command.


The processing on table aa...aa finished successfully.

The CSV file (aa...aa) contains an invalid line.


An attempt to read the data from table



An unexpected return value (aa...aa) was returned from the pdload command.




8-159

Error Code

KAPM06231-E

KAPM06232-E

KAPM06234-E

KAPM06235-E

KAPM06239-E

KAPM06241-E

KAPM06242-E

KAPM06243-E

KAPM06244-E

KAPM06245-E

Error Message

An attempt to upgrade InterBase has failed.




A table name in XML is null or 0 bytes.


An unexpected XML tag (aa...aa) has been detected.

aa...aa: Unexpected XML tag


An error occurred during SAX processing.


A fatal error occurred during SAX processing.


An unexpected data length (aa...aa) was detected.

aa...aa: Unexpected value


A SAXException occurred. (details =

aa...aa)

aa...aa: SAXException detailed information


The length of the data to be moved to

HiRDB exceeds the HiRDB limit. (data type of excessively long data, length) =

(aa...aa, bb...bb)

aa...aa: Data type of the excessively long data

bb...bb: Length of the excessively long data





An attempt to upgrade InterBase has failed.




A table name in XML is null or 0 bytes.


An unexpected XML tag (aa...aa) has been detected.


An error occurred during SAX processing.


A fatal error occurred during SAX processing.


An unexpected data length (aa...aa) was detected.


A SAXException occurred.


The length of the data to be moved to

HiRDB exceeds the HiRDB limit.



Please start HiRDB.



Error Code

KAPM06246-I

KAPM06248-I

KAPM06249-E

KAPM06250-I

KAPM06251-E

KAPM06252-E

KAPM06255-I

KAPM06256-E

Error Message

The table aa...aa was successfully created.




Table aa...aa was successfully created.







The data was registered successfully in table aa...aa.



The data was not registered in table

aa...aa.



Authentication has failed at aa...aa.

aa...aa: Database name


Table aa...aa was not created.





The data was registered successfully in table aa...aa.

The data was not registered in table

aa...aa.


Authentication has failed at aa...aa.




Processing to initialize database conversion is being performed.


The specified file could not be created.

(file = aa...aa)



Databases of application aa...aa are not supported.


Processing to initialize database conversion is being performed.

The specified file could not be created.




8-161


KAPM06257-I

Data is now being read from the old database. (progress = aa...aa/bb...bb)

aa...aa: Number of converted tables

bb...bb: Total number of tables to be converted


KAPM06258-I




KAPM06262-I

The database is now being converted.

(progress = aa...aa/bb...bb)

aa...aa: Number of converted tables

bb...bb: Total number of tables to be converted


The hcmdssslsetup started.

command has


KAPM06263-I

KAPM06264-I

KAPM06266-E

KAPM06267-E

The hcmdssslsetup ended.

command has


The hcmdssslsetup successfully.

command ended




The sslc.cnf file was not found.







This message is output when the hcmdssslsetup

command starts.


command ends.


command ends successfully.

This message is output when an option specified for a command is invalid.

Specify valid options.

This message is output when the sslc.cnf file does not exist at the storage location.

If the file option has been specified, confirm that the sslc.cnf file has been specified in the path for the argument.

If the file option has not been specified, collect the maintenance information, and then contact the Support Center.



Error Code

KAPM06268-E

KAPM06269-E

KAPM06270-I

KAPM06271-I

KAPM06272-E

KAPM06273-I

KAPM06274-I

KAPM06275-E

KAPM06276-I

KAPM06277-I

KAPM06278-E

Error Message

The sslc.cnf file is invalid.


Execution of the sslc command failed.



This message is output when the format of the sslc.cnf file is invalid.

Make sure that the sslc.cnf can be accessed, or that the user who executed the command has the appropriate privileges, and then execute the command again.

If there is still a problem, collect the maintenance information, and then contact the Support Center.

This message is output when execution of the sslc command fails.


This message is output when processing to create a private key starts.

Processing to create a private key has started.


Processing to create a private key has ended.


Processing to create a private key failed.


This message is output when processing to create a private key ends.

This message is output when processing to create a private key fails.


This message is output when processing to create a self-signed certificate starts.

Processing to create a self-signed certificate has started.


Processing to create a self-signed certificate has ended.


Processing to create a self-signed certificate failed.


Processing to create a self-signed certificate in DER format has started.


Processing to create a self-signed certificate in DER format has ended.


Processing to create a self-signed certificate in DER format failed.


This message is output when processing to create a self-signed certificate ends.

This message is output when processing to create a self-signed certificate fails.


This message is output when processing to create a self-signed certificate in DER format starts.

This message is output when processing to create a self-signed certificate in DER format ends.

This message is output when processing to create a self-signed certificate in DER format fails.




8-163

Error Code

KAPM06280-E

KAPM06281-I

KAPM06282-I

KAPM06283-E

KAPM06284-E

KAPM06285-E

KAPM06286-E

KAPM06287-E

KAPM06288-E

KAPM06289-E

KAPM06290-E

Error Message




This message is output when an internal error occurs.


Processing to create a certificate content file started.

Processing to create a certificate content file started.


Processing to create a certificate content file ended.


Processing to create a certificate content file has failed.


The sslc

command was not found.


File deletion has failed.


The private key was not found.


The self-signed certificate was not found.


The DER format self-signed certificate was not found.


The certificate contents file was not found.




Processing to create a certificate content file ended.

Processing to create a certificate content file has failed.


The sslc

command was not found.


Deletion of a private key, self-signed certificate, DER format self-signed certificate, or certificate content file created by the has failed. hcmdssslsetup

command


The private key was not found in the storage destination after it was created.


The self-signed certificate was not found in the storage destination after it was created.


The DER format self-signed certificate was not found in the storage destination after it was created.


After the certificate contents file had been created, it was not found in the storage destination.






Error Code

KAPM06303-E

KAPM06304-E

KAPM06305-E

KAPM06306-E

KAPM06307-E

KAPM06308-E

KAPM06309-E

KAPM06310-E

KAPM06311-E

KAPM06312-E

KAPM06313-E

KAPM06317-E

Error Message







Specify all the necessary options.




















The specified value is invalid. value =

aa...aa

aa...aa: Value





Specify the option and specify the necessary proceeding values. (user name and password, etc.)


Do not specify an unsupported option.


Check the specification of the option.










Correct the syntax error in the specified definition file.









8-165

Error Code

KAPM06318-E

KAPM06319-I

KAPM06321-E

KAPM06322-E

KAPM06323-I

KAPM06324-E

KAPM06325-I

KAPM06326-E

KAPM06327-I

KAPM06328-E

KAPM06330-I

KAPM06331-I

Error Message





The "bb...bb" file to be used by "aa...aa" does not exist.

aa...aa: Command name, class name, etc.

bb...bb: Name of the file that does not exist




Execution of the "aa...aa" command ended normally.



An attempt to execute the "aa...aa" command has failed.



HiRDB was started.


HiRDB was not started.


HiRDB was stopped.


HiRDB was not stopped.


aa...aa processing started.

aa...aa: Method name


aa...aa processing finished.

aa...aa: Method name






The bb...bb file to be used by aa...aa does not exist.

Check whether the file is in the specified location.






HiRDB was started.

HiRDB was not started.


HiRDB was stopped.

HiRDB was not stopped.


aa...aa processing started.

aa...aa processing finished.



Error Code

KAPM06332-E

KAPM06333-E

KAPM06334-E

Error Message

The database of the specified product has not been set up.


HiRDB cannot be stopped because a

Suite product is connected to HiRDB.


InterBase is not running.


KAPM06335-E The DBMS has not started.


KAPM06337-E

KAPM06338-E

KAPM06339-E

KAPM06340-E

KAPM06341-E

KAPM06342-E


Authentication has failed in the DBMS.








The DBMS environment already exists.




KAPM06343-E

KAPM06344-E







Use the hcmdsdbsetup command to set up the database of the specified product.



Stop the Suite product that is connected to HiRDB, then retry.

InterBase is not running.

Check whether InterBaseServer is running. For details, check hcmdsdbconvert[n].log.

The DBMS has not started.

Check whether DBMS is running. For details, check hcmdsdbconvert[n].log.

Authentication has failed at InterBase.

Specify the correct user ID and password. For details, check hcmdsdbconvert[n].log.

Authentication has failed in the DBMS.

Specify the correct user ID and password. For details, check hcmdsdbconvert[n].log.


Check hcmdsdbconvert[n].log.


Check hcmdsdbconvert[n].log.


Check hcmdsdbinitsetup[n].log.

The DBMS environment already exists.



Check the operating environment for the disk capacity. If necessary, free up some disk space. For details, check hcmdsdbinitsetup[n].log.







8-167

8-168

Error Code

KAPM06345-E

KAPM06346-E

Error Message



The file "aa...aa" already exists.



KAPM06347-W The specified file system area "aa...aa" already existed, so it was deleted.

aa...aa: File system area


KAPM06348-I

KAPM06349-E

The database was created successfully.


An attempt to create the database has failed.


KAPM06350-I

KAPM06351-E

KAPM06352-E

The database was deleted successfully.


An attempt to delete the database has failed.


Directory creation has failed. (directory

= aa...aa)

aa...aa: directory name


KAPM06353-I Set up the database again.


KAPM06396-E "aa...aa":"bb...bb"


bb...bb: Message


KAPM06398-E "aa...aa"

aa...aa: Message






If the target file is hcmdsdbsetRDArea.ini, a database might already exist at the specified database creation destination.

If such a database exists, change the database creation destination, and then perform setup again.

If such a database does not exist, delete the file indicated by aa...aa, and then perform setup again.

The specified file system area aa...aa already existed, so it was deleted.

The database was created successfully.

An attempt to create the database has failed.

The database was deleted successfully.

An attempt to delete the database has failed.

Directory creation has failed.

Check the destination where the database will be created. If necessary, revise the destination and set up the database again. If you cannot resolve the problem, collect maintenance information, and then contact the

Support Center.

Set up the database again.





Error Code

KAPM06399-E

KAPM06403-E

KAPM06404-E

KAPM06405-I

KAPM06407-E

KAPM06408-I

KAPM06409-E

KAPM06410-I

KAPM06411-I

KAPM06412-I

KAPM06413-I

KAPM06414-E

Error Message

















The "bb...bb" file to be used by "aa...aa" does not exist.

aa...aa: Command name, class name, etc.

bb...bb: Name of the file that does not exist


Execution of the "aa...aa" command ended normally.






The setup status is "not set up".


The setup status is "stand-alone".


The setup status is "active system".


The setup status is "standby system".


The option specification is incorrect.



The bb...bb file to be used by aa...aa does not exist.




The setup status is "not set up".

The setup status is "stand-alone".

The setup status is "active system".

The setup status is "standby system".

The option specification is incorrect.

Review and, if necessary, revise the option specification.



8-169

Error Code

KAPM06429-E

KAPM06433-E

KAPM06434-I

KAPM06436-E

KAPM06437-E

KAPM06438-I

KAPM06439-I

KAPM06440-I

KAPM06441-I

KAPM06442-E

KAPM06443-E

KAPM06444-E

Error Message










Processing ended normally. Processing ended normally.







The HiRDB service has started.


The HiRDB service has stopped.


The HiRDB service has already started.


The HiRDB service has already stopped.


The HiRDB service has not been set up.


An attempt to start the HiRDB service has failed.


An attempt to stop the HiRDB service has failed.


An attempt to execute the aa...aa command has failed.


Please review the specification of the option.

The HiRDB service has started.

The HiRDB service has stopped.

The HiRDB service has already started.

It is already stopped by HiRDB service.

The HiRDB service has not been set up.

Make sure that the products have been properly installed, and if necessary, take actions to satisfy this condition. If an error still occurs after taking the above actions, collect maintenance information, and then contact Customer Support.

An attempt to start the HiRDB service has failed.


An attempt to stop the HiRDB service has failed.




Error Code

KAPM06445-E

KAPM06459-E

KAPM06501-I

KAPM06502-I

KAPM06503-E

KAPM06504-E

KAPM06505-E

KAPM06506-E

KAPM06507-E

KAPM06508-E

Error Message








Hitachi Storage Command Suite product is connected to HiRDB.

Stop any Hitachi Storage Command Suite products that are connected to HiRDB, and then retry the operation.

If you cannot resolve the problem even by doing this, acquire the maintenance information, and then contact the

Support Center.



The method has started.



The method has started.


The method has finished.




A specified option is insufficient.


The value specified in the option is invalid. (option = aa...aa)



The specified directory cannot be created. (directory = aa...aa)

aa...aa: Directory


The specified directory already exists as a file. (file = aa...aa)




aa...aa)

aa...aa: Specified value


The method has finished.



A specified option is insufficient.


The value specified in the option is invalid.

Check the specified value of the option.


Make sure that you have write permission for the directory.

The specified directory already exists as a file.

Specify another directory name.


Specify a valid value.



8-171

8-172








Make sure that the file specification is correct. If you cannot solve the problem, collect maintenance information and contact the Support Center.

The directory aa...aa does not exist.



Delete the file, or move to another directory.

KAPM06511-E The aa...aa already exists.



KAPM06513-E

KAPM06514-I

KAPM06515-E

KAPM06516-E

KAPM06517-E

KAPM06518-E



Command aa...aa returned the value

bb...bb. The error message is cc...cc.


bb...bb: Return code

cc...cc: Error message




An IOException occurred. (details =

aa...aa)



An exception occurred. (details =

aa...aa)



A NullPointerException occurred. (details

= aa...aa)





The directory aa...aa already exists.

Specify another directory.

Command aa...aa returned the value

bb...bb. The error message is cc...cc.

Check the specified value of the option. If you cannot solve the problem, collect maintenance information and contact the

Support Center.






A NullPointerException occurred.



Make sure that HiRDB is installed. When a product of HiCommand 4.0 or later is installed, HiRDB is automatically installed.



Error Code

KAPM06519-E

KAPM06520-E

KAPM06521-E

KAPM06522-E

KAPM06523-I

KAPM06524-I

KAPM06525-I

KAPM06526-I

KAPM06527-I

KAPM06528-I

KAPM06529-I

KAPM06530-I

KAPM06531-I

Error Message

An error occurred while executing the hcmdsdbmode command.




The RD area for aa...aa has not been set up.





The hcmdsdbmove command has started.


Initialization for moving the database is being performed.


The data for aa...aa will now be moved.





The table definitions of the database are being imported.


The data is being imported.


The database procedures are being imported.







An error occurred while executing the hcmdsdbmode command.



Start HiRDB.

The RD area for aa...aa has not been set up.

In the type option, specify the installed product name.


Make sure that the Hitachi Storage

Command Suite products has been installed.

The hcmdsdbmove command has started.

Initialization for moving the database is being performed.

The data for aa...aa will now be moved.


The table definitions of the database are being imported.


The database procedures are being imported.





8-173

Error Code

KAPM06532-I

KAPM06533-I

KAPM06534-I

KAPM06535-I

KAPM06536-I

KAPM06537-I

KAPM06540-I

KAPM06541-I

KAPM06542-E

KAPM06543-I

Error Message

The table definitions of the database are being exported.


The data is being exported.


The database procedures are being exported.




The data is being imported. (progress =

aa...aa/bb...bb)

aa...aa: Amount of imported data

bb...bb: Total amount of data to be imported


The data is being exported. (progress =

aa...aa/bb...bb)

aa...aa: Amount of exported data

bb...bb: Total amount of data to be exported


The view is being imported.


The view is being exported.


The data to be imported to aa...aa is not in the directory in the datapath option.

aa...aa: The product for which the data to be imported cannot be found.


The database was exported successfully.



The table definitions of the database are being exported.


The database procedures are being exported.




The view is being imported.

The view is being exported.

When the import option was specified in the hcmdsdbmove command, the data to be imported from the product displayed in the message was not in the directory specified by the datapath option.

Please check that the data to be imported exists in the directory specified by the datapath option.

Also, if import data of multiple products exists in different directories, specify the type option, and then import the data for each product one product at a time.

The database was exported successfully.



Error Code

KAPM06544-E

KAPM06545-I

KAPM06546-E

KAPM06570-E

KAPM06571-E

KAPM06572-E

KAPM06573-E

KAPM06574-E

KAPM06575-E

KAPM06576-E

KAPM06577-E

Error Message

An attempt to export the database has failed.


The database was imported successfully.


An attempt to import the database has failed.




The specified options are insufficient.


The specified option value is invalid.


The specified directory name already exists as a file name. (file name =

aa...aa)



The directory name exceeds aa...aa characters.

aa...aa: Length of directory name

(number of characters)


The same value cannot be specified for the databasepath and exportpath parameters.



An attempt to export the database has failed.

The database was imported successfully.

An attempt to import the database has failed.

This message is displayed when the format of the specified option is invalid.

Specify a valid option, then retry.

This message is displayed when a required option is not specified or an unnecessary option is specified.

Specify a valid option, then retry.

This message is displayed when the specified value of the option is invalid.

Specify a valid option value, then retry.

This message is displayed when the directory name specified in the command option already exists as a file.


This message is displayed when the length (number of characters) of the directory name specified in the option exceeds the maximum.






This message is displayed when the character strings specified for the databasepath and exportpath parameters are the same.

Specify a different directory name, then retry.

This message is displayed when a required property has not been set in the cluster settings file.

Make sure the contents of the cluster settings file are correct.

This message is displayed when a value has not been set correctly in the cluster settings file.

Make sure the values in the cluster settings file are correct.



8-175

Error Code

KAPM06578-E

KAPM06579-E

KAPM06580-E

KAPM06581-E

KAPM06582-E

KAPM06583-E

KAPM06584-I

KAPM06585-I

KAPM06586-I

KAPM06587-E

Error Message

The cluster settings file was not found.




An attempt to clear a DBMS environment variable has failed.


The DBMS has not stopped.



This message is displayed when there is no cluster settings file in the conf directory.

Make sure that cluster.conf is in the conf directory.

This message is displayed when hcmds.home has not been set in the system properties.

Make sure that hcmds.home has been set in the system properties.

This message is displayed when an attempt to delete the DBMS client environment variable has failed.


This message is displayed when the

DBMS did not stop when the command was executed.

Before executing a command, stop the

DBMS service.

This message is displayed when an attempt to load the file has failed.



(file = aa...aa)




(file = aa...aa)



Processing to export data was successful.


Re-creation of the database was successful.


Processing to import data was successful.


An attempt to export data has failed.


This message is displayed when an attempt to write to the file has failed.


This message is displayed when data was exported successfully.

This message is displayed when the database was re-created successfully.

This message is displayed when data was imported successfully.

This message is displayed when an attempt to export data has failed.

Remove the cause of the failure, then retry. If the problem still cannot be solved, collect the maintenance information, and contact the Support

Center.



Error Code

KAPM06588-E

KAPM06589-E

KAPM06590-I

KAPM06591-E

KAPM06592-E

KAPM06601-I

KAPM06602-E

Error Message

An attempt to re-create the database has failed.


An attempt to import data has failed.



This message is displayed when an attempt to re-create the database has failed.


Center.

This message is displayed when an attempt to import data has failed.


Center.

This message is displayed when command execution ended normally.



The data to be imported was not found in the specified directory.


The data to be imported to aa...aa is not in the directory specified in the exportpath option.

aa...aa: The product that the import data could not be found.


This message is displayed when the data to be imported could not be found in the specified directory.

Specify the directory to which the data was exported, then retry. If the problem still cannot be solved, collect the maintenance information, and contact the Support Center.

The data to be imported of the product displayed in the message is not in the directory specified for the exportpath option.

Please confirm to exist an import data in the directory specified by the exportpath option.

Entered parameter.

aa...aa: Parameter entered by the user


User ID = aa...aa, application = bb...bb, permissions = cc...cc

aa...aa: User ID of the target user

bb...bb: Target application

cc...cc: Permission set by the target user


A specified parameter is invalid.


User ID = aa...aa, application = bb...bb, permissions = cc...cc

A specified parameter is invalid.

Check the specified parameter.



8-177

Error Code

KAPM06603-E

KAPM06604-E

Error Message

An attempt to read the file has failed.

(file = aa...aa)

aa...aa: Absolute path of the file


The database has not started.


An attempt to communicate with the server or database has failed.



An attempt to read the file has failed.

Make sure the file exists on the specified path aa...aa.

The database has not started.

Make sure the database has started.

KAPM06605-E

KAPM06606-E

KAPM06609-I

KAPM06610-E

KAPM06611-E

An error has occurred.


The command ended normally.


An option specification is invalid.


An attempt to load the hsso.conf file has failed.



KAPM06613-W Authentication data was not found in the repository.


An attempt to communicate with the server or database has failed.

Make sure the following have started: the

HBase Storage Mgmt Common Service or

HBase Storage Mgmt Web Service, and the database.

An error has occurred.


The command ended normally.

An option specification is invalid.

Specify a valid option as shown in the message, and then execute the command.

An attempt to load the hsso.conf file has failed.

Make sure the host name in hsso.conf is correct.


Make sure that the user name and password are correct.

If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.

Authentication data was not found in the repository.



Error Code

KAPM06614-E

KAPM06640-E

KAPM06641-E

KAPM06642-E

KAPM06643-E

KAPM06659-E

KAPM06665-I

KAPM06666-I

Error Message

An attempt to communicate with SSO

Server has failed.






An error occurred during file input.


An attempt to acquire file information has failed.


aa...aa



The DBMS has started.


The DBMS has stopped.



An attempt to communicate with SSO

Server has failed.

For a distributed environment:

5. If you executed the command from the primary side:

Make sure that the Single Sign-On server on the primary side is running.

6. If you executed the command from the secondary side:

Make sure that the Single Sign-On server on the primary side is running.

If the Single Sign-On server on the primary side is not running, start it, and restart the Single Sign-On server on the secondary side.

If the Single Sign-On server on the primary side is running, make sure that the Single Sign-On server on the secondary side is running.

For a non-distributed environment:

1. Make sure that the Single Sign-On server is running.

If you cannot solve the problem, collect the maintenance information, and then contact the Support Center.





An error occurred during file input.


An attempt to acquire file information has failed.





The DBMS has started.

The DBMS has stopped.



8-179


KAPM06667-I

KAPM06668-I

KAPM06669-E

KAPM06670-E

KAPM06671-E

KAPM06672-E

KAPM06673-E

aa...aa processing has started.

aa...aa: Processing name


aa...aa processing has finished.








aa...aa)

aa...aa: Value


Execution of the command aa...aa has failed.



The DBMS did not start.


KAPM06674-E

KAPM06675-I

KAPM06676-I

The DBMS did not stop.


The DBMS has not been set up




KAPM06679-E The value of hcmds.home cannot be acquired.


KAPM06683-E "aa...aa":"bb...bb"

aa...aa: command name

bb...bb: message



Processing has started.

Processing has finished.







Execution of the command has failed.


The DBMS did not start.


The DBMS did not stop.


The DBMS has not been set up




Message for debugging:




KAPM06689-E

KAPM06690-E

KAPM06691-E

Processing has terminated abnormally.

(processing name = aa...aa)



The file hcmdsdbsetRDArea.ini does not exist.




KAPM06692-W Execution of the command aa...aa has failed.



KAPM06753-E A property value in the installation information file is invalid. (aa...aa)

aa...aa: Property value


KAPM06760-I A method has started.


KAPM06761-I

KAPM06762-I

KAPM06763-I

KAPM06764-I

KAPM06765-E

KAPM06766-E

A method has finished.


The hcmdsssltool command has started.


The hcmdsssltool command has ended.


The hcmdsssltool command ended successfully.




Creation of a private key failed.



Processing has terminated abnormally.

(processing name = aa...aa)


The file hcmdsdbsetRDArea.ini does not exist.




Execution of the command has failed.


A property value in the installation information file is invalid.

Check the contents of the installation information file.

A method has started.

A method has finished.

The

The

The hcmdsssltool command

has started. hcmdsssltool command

has ended. hcmdsssltool command successfully.


Check the options.

ended

Creation of a private key failed.

Check the file output location and the specified distinguished name, and then re-execute the command.

If this does not resolve the problem, collect maintenance information, and then contact the Support Center.



8-181

Error Code

KAPM06767-E

KAPM06768-E

KAPM06769-E

Error Message

Creation of a self-signed certificate failed.


Creation of a CSR failed.


Creation of a certificate content file failed.



Creation of a self-signed certificate failed.



Creation of a CSR failed.



Creation of a certificate content file failed.





Failed to delete a key store.

KAPM06770-E An internal error occurred.


KAPM06771-W Failed to delete a key store.


KAPM06772-E

KAPM06773-E

KAPM06774-E

KAPM06775-E

No value has been specified for an option.






Analysis of binary data failed.(position =

aa...aa,part = bb...bb)

aa...aa: Position

bb...bb: Part



Check the options.





Analysis of binary data failed.




Error Code

KAPM06776-E

KAPM06777-I

KAPM06780-I

KAPM06782-I

KAPM06783-I

KAPM06784-I

KAPM06785-I

KAPM06787-E

KAPM06790-E

KAPM06791-E

KAPM06792-E

KAPM06793-E

Error Message

The keytool command failed.



The keytool command failed.

Take action according to the content of the following messages:



KAPM06766-E







KAPM06767-E

KAPM06768-E

KAPM06769-E

The keytool command has ended. The keytool command has ended.(Return code = aa...aa)

aa...aa: Return code


Enter Server Name [default=aa...aa]:

aa...aa: Host name


Enter Server Name.

Enter Organizational Unit.


Enter Organization Name

[default=aa...aa]:



Enter your City or Locality:


Enter your State or Province:


Enter your two-character country-code:


Enter Organization Name.

Enter your City or Locality:

Enter your State or Province.

Enter your two-character country-code.

The Distinguished Name is confirmed.



Creation of a distinguished name failed.


An IllegalArgumentException occurred.




A HBaseDeleteFileException occurred.




Creation of a distinguished name failed.


An IllegalArgumentException occurred.




A HBaseDeleteFileException occurred.






8-183

Error Code

KAPM06794-E

KAPM06795-E

KAPM06796-E

Error Message

A KeyStoreException occurred.


A CertificateException occurred.


An UnrecoverableKeyException occurred.


KAPM06799-I aa...aa aa...aa: Debug information


KAPM06900-I


KAPM06901-I

Processing to start the service has started.


The service was started successfully.



A KeyStoreException occurred.


A CertificateException occurred.


An UnrecoverableKeyException occurred.


A NoSuchAlgorithmException occurred.


This message contains debug information.

This message is displayed when processing to start the service starts.

KAPM06902-I

KAPM06903-I

KAPM06904-I

KAPM06905-I

KAPM06906-I

KAPM06907-I

Processing to stop the service has started.


The service was stopped successfully.


Processing to start the DBMS has started.


The DBMS was started successfully.


Processing to stop the DBMS has started.


The DBMS was stopped successfully.


This message is displayed when the service starts successfully. However, if the HiCommand version is earlier than

5.7, you might need to start some of the services manually because they do not start automatically.

This message is displayed when processing to stop the service starts.

This message is displayed when the service stops successfully.

This message is displayed when processing to start the DBMS starts.


DBMS starts successfully.

This message is displayed when processing to stop the DBMS starts.


DBMS stops successfully.



Error Code

KAPM06908-E

KAPM06909-E

KAPM06910-E

KAPM06911-E

KAPM06912-E

KAPM06913-E

KAPM06914-E

KAPM06915-E

Error Message



An attempt to stop the service has failed.


The database has not been initialized.


An attempt to release the connection of the connection pool has failed.


KAPM06920-W Log initialization failed.


KAPM06921-E

An attempt to start the DBMS has failed.


An attempt to stop the DBMS has failed.


An attempt to start the service or the

DBMS has failed.


An attempt to stop the service or the

DBMS has failed.





This message is displayed when an attempt to start the service fails.


This message is displayed when an attempt to stop the service fails.

Stop the Suite product that is connected to the DBMS, then retry. If the problem still cannot be resolved, collect the maintenance information, and contact the Support Center.

This message is displayed when an attempt to start the DBMS fails.


This message is displayed when an attempt to stop the DBMS fails.


This message is displayed when an attempt to start the service or the DBMS fails.


This message is displayed when an attempt to stop the service or the DBMS fails.


The database has not been initialized.


This message is displayed when an attempt to release the connection of the connection pool fails.



If the problem occurs frequently, collect maintenance information, and then contact the Support Center.





8-185


KAPM06922-E

KAPM06923-E

KAPM06924-E

KAPM06925-E

KAPM06926-E

KAPM06927-E

The aa...aa command will stop because setting an environment variable failed.

(details = bb...bb)


bb...bb: Details


The aa...aa command will stop because internal processing failed. (details =

bb...bb)


bb...bb: Details



(function = aa...aa, error code =

bb...bb)

aa...aa: Function



A system environment variable is invalid.


The aa...aa command will stop because setting an environment variable failed.

(details = bb...bb)


bb...bb: Details


The aa...aa command will stop because internal processing failed. (details =

bb...bb)


bb...bb: Details


KAPM07000-W Update the current JavaScript to the latest version.


KAPM07001-E The specified user cannot log in because the user does not have permission to access the manager screen.


The specified command stopped because setting an environment variable failed.

Re-execute the command. If the problem cannot be solved, collect maintenance information, and then contact the

Support Center.

The specified command stopped because internal processing failed.


Support Center.



A system environment variable was invalid.


The specified command stopped because setting an environment variable failed.


Support Center.

The specified command stopped because internal processing failed.


Support Center.

Update the current JavaScript to the latest version.

The specified user cannot log in because the user does not have permission to access the manager screen.

Log in as a user who has Hitachi Storage

Command Suite Common Component

Administrator permissions.



Error Code

KAPM07002-E

KAPM07003-E

KAPM07004-E

KAPM07005-E

KAPM07006-E

KAPM07007-E

KAPM07008-E

KAPM07009-E

KAPM07010-E

KAPM07011-E

KAPM07012-E

KAPM07013-E

KAPM07014-E

Error Message

The application is not registered on the

HSSO Server.


The user ID and/or password are not correct.


The executing user does not have permission to execute the method.


The specified user does not exist.




This user has already been deleted.


A problem occurred during processing.


A communication error occurred during processing.


Null is specified for the argument.




The specified group does not exist.


An attempt to register user information has failed, because a problem occurred during registration processing.


An attempt to update user information has failed, because a problem occurred during update processing.



The application is not registered on the

HSSO Server.


The user ID and/or password are not correct.

Input the correct user ID and password.

The executing user does not have permission to execute the method.


The specified user does not exist.

Confirm the user information.


Input a value other than the specified user name.

This user has already been deleted.

Confirm the user information.

A problem occurred during processing.


A communication error occurred during processing.






The specified group does not exist.

Confirm the group information.

An attempt to register user information has failed, because a problem occurred during registration processing.


An attempt to update user information has failed, because a problem occurred during update processing.




8-187

Error Code

KAPM07015-E

KAPM07016-E

KAPM07017-E

KAPM07018-E

KAPM07019-I

KAPM07021-E

KAPM07022-E

KAPM07023-I

KAPM07024-E

Error Message

An attempt to delete user information has failed, because a problem occurred during deletion processing.


An attempt to change the password has failed, because a problem occurred while processing the change.


A problem occurred during an attempt to acquire user information.


A problem occurred during an attempt to acquire group information.


The user information was successfully deleted.



An attempt to delete user information has failed, because a problem occurred during deletion processing.


An attempt to change the password has failed, because a problem occurred while processing the change.


A problem occurred during an attempt to acquire user information.


A problem occurred during an attempt to acquire group information.


The user information was successfully deleted.

User ID aa...aa will be deleted.

If deleted, this user will not be able to log on. Is this OK?

If deleted, this user will not be able to log on. Is this OK?

aa...aa: User ID


A problem occurred during an attempt to acquire HiCommand application information.


An attempt to update HiCommand application information has failed, because a problem occurred during update processing.


HiCommand application information will now be updated.


A problem occurred during an attempt to acquire user application information.


A problem occurred during an attempt to acquire Hitachi Storage Command Suite application information.


An attempt to update Hitachi Storage

Command Suite application information has failed, because a problem occurred during update processing.


Hitachi Storage Command Suite application information will now be updated.

A problem occurred during an attempt to acquire user application information.





KAPM07025-E

KAPM07026-I

An attempt to update user application information has failed, because a problem occurred during update processing.


User application information will now be updated.


KAPM07027-W The specified user application name already exists. application name =

aa...aa




An attempt to update user application information has failed, because a problem occurred during update processing.


User application information will now be updated.

The specified user application name already exists.

Input a value other than the specified application name.

This entry is required. Enter a value.

Input a value. This entry is required. Enter a value.

aa...aa: Input item


A character that cannot be used for this entry has been entered.



A character that cannot be used for this entry has been entered.

Use only characters that are valid for this item.

KAPM07031-E

The number of characters in this entry exceeds the maximum.



The password entries do not match.


The number of characters in this entry exceeds the maximum.

Input a character string of a length less than or equal to the maximum.

Enter from 4 to 255 characters for this entry.



KAPM07033-W The specified URL does not exist in the class. URL = aa...aa

aa...aa: URL


The password entries do not match.

Make sure that the values for the password and password confirmation input items are identical.

Enter from 4 to 255 characters for this entry.

Input a character string of a length between 4 and 255 characters (inclusive) for this input item.

The specified URL does not exist in the class.




8-189

Error Code

KAPM07034-E

KAPM07035-E

KAPM07036-I

KAPM07037-I

KAPM07230-I

KAPM07231-I

KAPM07232-I


IllegalDataException occurred. (details =

aa...aa)

aa...aa: Details


The format of the specified URL is invalid. URL = aa...aa

aa...aa: URL


The password will change. Is this OK?



After the password changes, you must log in again.


IllegalDataException occurred.


The format of the specified URL is invalid.

Check the entered URL. If necessary, enter the correct URL.



After the password changes, you must log in again.

The same value cannot be specified into these input items.

Please reinput other values in an input item.

The same value cannot be specified into these input items.



The user was registered successfully.

(operator = aa...aa, user ID = bb...bb, function = cc...cc)

aa...aa: Operator name

bb...bb: Processed user ID

cc...cc: Function name


The user was deleted successfully.












This is an audit log showing that the user has been registered successfully.

This is an audit log showing that the user has been deleted successfully.

This is an audit log showing that the password has been changed successfully.



Error Code

KAPM07233-I

KAPM07235-I

KAPM07236-I

KAPM07237-E

KAPM07238-E

KAPM07239-E

Error Message

The user information was modified successfully. (operator = aa...aa, user

ID = bb...bb, function = cc...cc)





The user was locked successfully.






The user was unlocked successfully.






The specified password does not satisfy the entry conditions. (operator =

aa...aa, user ID = bb...bb, function =

cc...cc)





The specified e-mail is too long.






The old password is incorrect. (operator

= aa...aa, user ID = bb...bb, function =

cc...cc)






This is an audit log showing that the user information has been modified successfully.

This is an audit log showing that the user has been locked successfully.

This is an audit log showing that the user has been unlocked successfully.

This is an audit log that shows that the password that doesn't meet the input requirement is specified.

This is an audit log that shows that the e-mail string that is too long is specified.

This is an audit log that shows that the old password is incorrect.



8-191

Error Code

KAPM07240-E

KAPM07241-I

KAPM07242-E

KAPM07243-I

KAPM07244-E

KAPM07245-I

KAPM07246-E

KAPM07247-I

Error Message

An attempt to execute the aa...aa operation has failed. (operator =

bb...bb, user ID = cc...cc, function =

dd...dd)

aa...aa: Operation name

bb...bb: Operator name

cc...cc: Processed user ID

dd...dd: Function name


A user was registered successfully. (user

ID = aa...aa)

aa...aa: User ID


Registration of a user has failed. (user

ID = aa...aa)

aa...aa: User ID


The user information was updated successfully. (user ID = aa...aa)

aa...aa: User ID


An attempt to update the user information has failed. (user ID =

aa...aa)

aa...aa: User ID


A user was deleted successfully. (user

ID = aa...aa)

aa...aa: User ID


Deletion of a user has failed. (user ID =

aa...aa)

aa...aa: User ID


The authorization group was added successfully. (operator = aa...aa, distinguished name = bb...bb, function

= cc...cc)


bb...bb: Distinguished name




This is an audit log that shows that the

aa...aa process has failed.

This audit log data indicates that a user was registered successfully.

This audit log data indicates that registration of a user has failed.

This audit log data indicates that the user information was modified successfully.

This audit log data indicates that an attempt to update the user information has failed.

This audit log data indicates that a user was deleted successfully.

This audit log data indicates that deletion of a user has failed.

This is an audit log that shows all the authorization groups that have been added successfully.



Error Code

KAPM07248-E

KAPM07249-I

KAPM07250-I

KAPM07251-I

KAPM07252-E

KAPM07253-I

KAPM07254-E

Error Message

An attempt to execute the aa...aa operation has failed. (operator =

bb...bb, distinguished name = cc...cc, function = dd...dd)

aa...aa: Operation name

bb...bb: Operator name

cc...cc: Distinguished name

dd...dd: Function name


The authorization group was deleted successfully. (operator = aa...aa, distinguished name = bb...bb, function

= cc...cc)





The permissions were changed successfully. (operator = aa...aa, distinguished name = bb...bb, permissions = cc...cc)



cc...cc: Permissions after they were changed


The authorization group was registered successfully. (distinguished name =

aa...aa)



An attempt to register the authorization group has failed. (distinguished name =

aa...aa)



The authorization group was deleted successfully. (distinguished name =

aa...aa)



An attempt to delete the authorization group has failed. (distinguished name =

aa...aa)




This is an audit log that shows the failed aa...aa processes.

This is an audit log that shows all the authorization groups that have been deleted successfully.

This is an audit log that shows all the permissions that have been changed successfully.

This is an audit log that shows all the authorization groups that have been registered successfully.

This is an audit log that shows all the authorization groups that have failed to be registered.

This is an audit log that shows all the authorization groups that have been deleted successfully.

This is an audit log that shows all the authorization groups that have failed to be deleted.



8-193

Error Code

KAPM07255-I

KAPM07256-E

KAPM07300-I

KAPM07301-I

KAPM07302-I

KAPM07303-E

KAPM07306-E

KAPM07307-E

KAPM07308-E

KAPM07309-E

KAPM07310-I

KAPM07311-I

Error Message

The authorization group's permissions were changed successfully.

(distinguished name = aa...aa)



An attempt to change the authorization group's permissions has failed.




The hcmdshpsimcert started.

command has


The hcmdshpsimcert terminated.

command has


The hcmdshpsimcert successful.

command was


The hcmdshpsimcert failed.

command has



cannot be



This is an audit log that shows all the authorization group permissions that have been changed successfully.

This is an audit log that shows all the authorization group permissions that have failed to be changed.

The hcmdshpsimcert

command started.

The hcmdshpsimcert

command ended.

The hcmdshpsimcert successful.

command was

The hcmdshpsimcert

command failed.








Importing of the certificate has started.


Importing of the certificate has ended.


The hcmds.home

acquired.

value cannot be



Please revise the option specification.





Importing of the certificate started.

Importing of the certificate ended.




KAPM07312-E

KAPM07313-E

KAPM07314-E

KAPM07315-E

The host name or the port number is invalid.



HPSIM server has failed.


The format of the certificate acquired from the HPSIM server is invalid.


An attempt to load the keystore file has failed.


KAPM07316-W The certificate of the specified host is already registered.


KAPM07317-I

KAPM07318-E

The following certificate was imported into the keystore.


An attempt to output the keystore file has failed.


KAPM07319-E

KAPM07320-I

An attempt to input the keystore file has failed.


Host name: "aa...aa"



KAPM07321-I

KAPM07322-I

KAPM07323-I

Processing to display the certificate list has started.


Processing to display the certificate list has ended.


The certificate is not stored.




Please revise the specified host name.

Communication with the HPSIM server failed.

Please confirm whether the HPSIM server running.

The format of the certificate acquired from the HPSIM server is invalid.




The certificate of the specified host has already been registered.

The following certificate was imported to the keystore.



An attempt to input the keystore file has failed.


Host name

Processing to display the certificate list started.

Processing to display the certificate list ended.

The certificate is not stored.



8-195


KAPM07324-E

KAPM07325-I

KAPM07326-I

KAPM07346-I

A problem occurred while displaying the certificate list.


Deletion of the certificate has started.


The certificate has been deleted.


KAPM07327-I

KAPM07328-W The certificate for the aa...aa host is not registered.



KAPM07329-E

The certificate for the aa...aa host was deleted.



KAPM07330-E

An attempt to delete the certificate has failed.


An attempt to renew the keystore has failed.


KAPM07342-E An exception occurred.


KAPM07343-E

KAPM07344-I



GET processing for "

/Proxy/Getkey

" has started.


KAPM07345-I GET processing for " ended.

/Proxy/Getkey

" has


The request from "aa...aa" was accepted.




A problem occurred while displaying the certificate list.


Deletion of the certificate started.

The certificate has been deleted.

The certificate of the specified host was deleted.

The certificate of the specified host name is not registered.

An attempt to delete the certificate has failed.


An attempt to modify the keystore has failed.






The GET processing of " started.

/Proxy/GetKey

"

The GET processing of " ended.

/Proxy/GetKey

"

The request from aa...aa was accepted.




KAPM07347-I

KAPM07348-E

KAPM07349-E

The one-time key was issued. (key =

aa...aa)

aa...aa: Onetimekey


An attempt to issue the one-time key has failed.


An attempt to create the one-time key failed because the number of keys had exceeded the maximum.


KAPM07350-W

The one-time key does not exist. (key =

aa...aa)



KAPM07351-W The expiration date of the one-time key has passed. (key = aa...aa)



KAPM07352-I The one-time key was deleted normally.

(key = aa...aa)



KAPM07355-I

The one-time key that passed the expiration date was deleted. (key =

aa...aa)



KAPM07356-I

KAPM07357-I


/Proxy/SSO

" has started.



/Proxy/SSO

" has ended.


KAPM07358-E An error occurred during a parameter check.



The one-time key was issued. (key =

aa...aa)

An attempt to issue the one-time key has failed.


An attempt to create the one-time key failed because the number of keys exceeded the maximum.

Please check whether a one-time key has been generated illegally.

The one-time key does not exist. (key =

aa...aa)

The one-time key expired. (key =

aa...aa)

The one time key was deleted normally.

(key = aa...aa)

The expired one-time key was deleted.

(key = aa...aa)

The GET processing of " started.

/Proxy/SSO

"

The GET processing of " ended.

/Proxy/SSO

"





8-197


KAPM07359-I

KAPM07360-E

KAPM07363-I

KAPM07364-E

KAPM07367-I

The host name is valid.




The one-time key is valid.


KAPM07368-W The one-time key is invalid.


KAPM07371-I Verification of the request parameter was successful.


KAPM07372-E

KAPM07375-I

An attempt to verify the request parameter has failed.


The URL is a normal value.


KAPM07376-E

Parameter output: "aa...aa" = "bb...bb"

aa...aa: Parameter

bb...bb: Value


An attempt to load the keystore has failed.


KAPM07377-E

The URL is an invalid value.


An attempt to convert the aa...aa permission has failed.

aa...aa: Authority name



Parameter output: aa...aa = bb...bb

An attempt to load the keystore has failed.


The host name is valid.


Please make sure the certificate from the launch-source has been imported.

The one-time key is valid.

The one-time key is invalid.

Verification of the request parameter was successful.

Verification of the request parameter failed.


The URL value is normal.

The URL value is invalid.


An attempt to convert the aa...aa permission has failed.




Error Code

KAPM07378-I

KAPM07379-E

KAPM07380-I

KAPM07381-E

KAPM07382-E

KAPM07383-I

KAPM07384-I

KAPM07385-E

KAPM07386-E

KAPM07387-E

KAPM07388-E

KAPM07389-E

Error Message

A redirection to "aa...aa" will be performed.

aa...aa: redirect URL




The certificate of aa...aa has been imported.

aa...aa: Alias


The certificate of aa...aa has not been imported.

aa...aa: Alias


A server problem occurred.


Data verification has started.


Data verification has ended.


An invalid character string was specified for the token.


"SHA1with RSA" is not supported.


The certificate format is invalid.


The signature object has not been initialized.


"US-ASCII" is not supported.



The user will be redirected to aa...aa.



The aa...aa certificate has been imported.

The aa...aa certificate has not been imported.

Please confirm whether the certificate is importing done.

A problem with the server occurred.


Verification of the data started.

Verification of the data ended.

An invalid character string was specified for the token.


"SHA1withRSA" is not supported.


The format of the certificate is invalid.


The signature object has not been initialized.


"US-ASCII" is not supported.




8-199

8-200

Error Code

KAPM07390-I

KAPM07391-I

KAPM07392-E

KAPM07393-E

KAPM07400-E

KAPM07401-I

KAPM07402-I

KAPM07403-E

KAPM07404-E

KAPM07405-E

KAPM07406-E

KAPM07407-E

Error Message

Generation of the HSSO token has started.


Generation of the HSSO token has ended.


The permission conversion definition file was not found.


An attempt to load the permission conversion definition file has failed.


The definition file was not found.


Generation of the X509 certificate object has started.


Generation of the X509 certificate object has ended.









The format of the certificate acquired from HPSIM is invalid.





Generation of the HSSO token started.

Generation of the HSSO token ended.

The permission conversion definition file was not found.


An attempt to load the permission conversion definition file has failed.


The definition file was not found.


Generation of the X509 certificate object started.

Generation of the X509 certificate object ended.







Please confirm whether the HPSIM server running.

The format of the certificate acquired from HPSIM is invalid.




Authentication succeeded.




Error Code

KAPM07420-E

KAPM07421-E

KAPM07422-E

KAPM07423-E

KAPM07424-E

KAPM08001-E

KAPM08002-E

KAPM08003-E

KAPM08004-E

KAPM08005-E





(aa...aa)

aa...aa: Argument


A specified value is invalid. (aa...aa,

bb...bb)

aa...aa: Parameter

bb...bb: Value




The domain name is invalid.


The user name is invalid.








There is an unusable character in the domain name sent from HPSIM.

Please revise the HPSIM domain name.

There is an unusable character in the user name sent from HPSIM.

Please revise the HPSIM user name.














Please fix the cause of the error. For details on the cause, see the

HpsimSSO[n] log.














8-201

Error Code

KAPM08006-E

KAPM08007-E

KAPM08008-E

KAPM08009-I

KAPM08010-E

KAPM08011-E

KAPM08013-E

KAPM08015-E

KAPM08016-E

KAPM08017-E

KAPM08018-E

KAPM08019-E

KAPM08020-E

Error Message







The logout process has completed.




Your session is invalid.











The logout process has completed.



Your session is invalid.

Logout, then login.


Use a browser supported by the Hitachi

Storage Command Suite products being used.

Now loading.


The registered data in the common repository is invalid.(aa...aa)









An error occurred on the SSO Server.



SSO server has failed.









Logout, then login.

An error occurred on the SSO server.

Logout, then login.

An attempt to communicate with the SSO server has failed.

Logout, then login.



Error Code

KAPM08021-E

KAPM08022-E

KAPM08100-E

KAPM08101-E

KAPM08102-E

KAPM08103-E

KAPM08104-E

KAPM08105-E

KAPM08106-E

KAPM08107-E


The DBMS is stopped.


The Common Component database is blocked.




The specified node was not found. key=(aa...aa)

aa...aa: Node key


The object tree has not been created.


An attempt to create the object tree has failed.


An attempt to add a child node to the object tree has failed. (aa...aa)

aa...aa: Node key


The specified node has already been registered. key=(aa...aa)

aa...aa: Node key


The tree information cannot be acquired. (aa...aa)

aa...aa: Node key


The node information is invalid. (aa...aa,

bb...bb)


bb...bb: Acquired value


The DBMS is stopped.


The Common Component database is blocked.

Please contact the server administrator.



The specified node was not found.


The object tree has not been created.


An attempt to create the object tree has failed.


An attempt to add a child node to the object tree has failed.


The specified node has already been registered.


The tree information cannot be acquired.


The node information is invalid.




8-203


KAPM08108-E

KAPM08109-E

KAPM08110-E

KAPM08111-E

KAPM08112-E

An invalid argument was specified during node creation. (aa...aa, bb...bb)




The tree information is invalid. (aa...aa,

bb...bb)

aa...aa: Route-node key (database)

bb...bb: Route-node key (memory)


The node array cannot be acquired.

(aa...aa, bb...bb)




The hierarchy number of the node array cannot be acquired. (aa...aa, bb...bb)




The node array is invalid. (aa...aa,

bb...bb)




KAPM08113-E The hierarchy number of the node array is invalid. (aa...aa)

aa...aa: Hierarchy number of the node


KAPM08114-W An invalid argument was specified during node creation. (aa...aa, bb...bb)




KAPM08115-E An internal error occurred.



An invalid argument was specified during node creation.


The tree information is invalid.


The node array cannot be acquired.


The hierarchy number of the node array cannot be acquired.


The node array is invalid.


The hierarchy number of the node array is invalid.


An invalid argument was specified during node creation.






Error Code

KAPM08116-E

KAPM08150-E

KAPM08152-E

KAPM08154-E

KAPM08160-E

KAPM08200-E

KAPM08201-E

KAPM08202-E

KAPM08203-E


A value that exceeds the maximum value has been specified. (aa...aa,

bb...bb)




The request is invalid. (aa...aa, bb...bb)

aa...aa: Key

bb...bb: Value


The request is invalid. (aa...aa)

aa...aa: Key


An attempt to display the object tree has failed.


The data registered in the common repository is invalid. (aa...aa, bb...bb)

aa...aa: Key

bb...bb: Value


The request parameter required for the display of the Application Bar area is invalid.



If you click the "Refresh Tree" button, the initial object tree will be displayed. If you cannot display the tree, log out, and then log in again.


The number of elements in the array does not match the other arrays.


The request parameter required for the display of the Summary area is invalid.


A value that exceeds the maximum value has been specified.

Check and, if necessary, revise the settings.





An attempt to display the object tree has failed.


The data registered in the common repository is invalid.


The request parameter required for the display of the Application Bar Area is invalid.



If you click the "Refresh Tree" button, the initial object tree will be displayed. If you cannot display the tree, log out, and then log in again. If you cannot resolve this problem, collect maintenance information, and then contact the

Support Center.

The number of elements in the array does not match the other arrays.


The request parameter required for the display of the Summary area is invalid.




8-205

Error Code

KAPM08302-E

KAPM08303-E

KAPM08304-E

KAPM08308-E

KAPM08309-E

KAPM08311-E

KAPM08402-E

KAPM08403-E

Error Message

An error occurred while acquiring the resource bundle.


An error occurred while reading the resource file.


An attempt to access the resource file has failed.




The URL object cannot be created.


An attempt to access the file has failed.


An unusable HTML tag is included.


The warning banner message exceeded

1000 characters.



An error occurred while acquiring resource bundle.


An error occurred during resource file input.


An attempt to access the resource file has failed.




URL object was not able to be made.


An attempt to access the file has failed.


This message is displayed when the message entered by the user contains an unusable HTML tag.

Please enter supported HTML tags only.

This message is displayed when the warning banner message entered by the user exceeds 1000 characters.

Enter no more than 1000 characters.



Error Code

KAPM08404-E

Error Message

An attempt to register the warning banner message has failed.



This message is displayed when an attempt to register a warning banner message from the security GUI window fails.

Perform the following actions:

1. Check that the following folder exists:

Windows: Hitachi Storage Command

Suite Common Componentinstallation-

directory\Base\ conf\sec\resource

Solaris:

/opt/HiCommand/Base/conf/sec/resou rce

Linux: Hitachi Storage Command

Suite Common Componentinstallation-

directory/Base/conf/sec/resource

2. Please delete the following folder:


Suite Common Component- installation-folder

\ \Base conf\sec\resource\bannerresource.p

roperties

Solaris or Linux:

/opt/HiCommand/Base/conf/sec/resou rce/bannerresource.properties

3. Make sure you have access permissions for the following file.


Suite-Common-Componentinstallationfolder

\conf\sec\resource\bannerreso urce.properties

Solaris:


Linux: Hitachi-Storage-Command-

Suite-Common-Componentinstallationdirectory

/Base/conf/sec/resource/ba nnerresource.properties




8-207

Error Code

KAPM08405-E

KAPM08406-E

KAPM08407-E

KAPM08408-E

Error Message

An attempt to delete the warning banner message has failed.


The specified file name already exists as a directory name. (directory name =

aa...aa)



The specified directory name already exists as a file name. (file name =

aa...aa)



The directory does not exist. (directory name = aa...aa)




This message is displayed when an attempt to delete a warning banner message from the security GUI window fails.

Perform the following actions:

1. Check that the following file exists:


Suite Common Componentinstallationfolder

\Base\conf\sec\resource\banne rresource.properties

Solaris:


Linux: Hitachi Storage Command

Suite Common Componentinstallationdirectory

/Base/conf/sec/resource/ba nnerresource.properties


This message is output to the log when an attempt to register a warning banner message from the security GUI window fails.

The system environment is invalid.



The system environment is invalid.



Please create the following folder, then retry:


Suite Common Component-installationdirectory\Base\

conf\sec

Solaris:

/opt/HiCommand/Base/conf/sec

Linux: Hitachi Storage Command Suite

Common Component-installationdirectory/Base/conf/sec



Error Code

KAPM08409-E

KAPM08410-E

KAPM08411-E

KAPM08412-E

Error Message

An attempt to delete the warning banner message has failed.


The specified node is invalid. (node name = aa...aa)

aa...aa: Node name

Output destinations: Destinations for output level 10. hcmds.home

is not set in the Java system properties.


The bannertaglist.conf

exist.

file does not



This message is output to the log when an attempt to delete a warning banner message from the security GUI window fails.

Check that the following file exists:


Suite Common Component-installationdirectory\Base

\conf\sec\resource\bann erresource.properties

Solaris:

/opt/HiCommand/Base/conf/sec/resourc e/bannerresource.properties


Common Component-installationdirectory/Base/conf/sec/resource/banner resource.properties

This message is displayed when an invalid node is specified in the tree display in the security GUI window.

Collect maintenance information and contact the Support Center. hcmds.home

has not been set in the Java system properties.

Make sure that hcmds.home has been set in the Java system properties.

This message is displayed when no bannertaglist.conf file exists during processing to acquire a supported tag list.

Check that the following file exists:


Suite Common Component-installation-

directory \conf\sec\bannertaglist.conf

Solaris:

/opt/HiCommand/Base/conf/sec/bannertaglist.c

onf


Common Component-installation-

directory/Base/conf/sec/bannertaglist.co

nf



8-209

Error Code

KAPM08431-E

Error Message

An attempt to register the security settings information has failed.


KAPM08910-E An exception occurred.



When failing from security GUI screen to the security configuration registration will be displayed.

Do the following:

1. Confirm the following folder exists.


Suite-Common-Componentinstallationfolder\Base\

conf\sec\resource

Solaris:

/opt/HiCommand/Base/conf/sec/resou rce


Suite-Common-Component-

Installationdirectory

/Base/conf/sec/resource

2. Please delete it when the following folders exist.



\Base\conf\sec\resource\secur ity.conf

Solaris:

/opt/HiCommand/Base/conf/sec/resou rce/security.conf




/Base/conf/sec/resource/se curity.conf

3. Make sure you have access permissions for the following file.



\Base\conf\sec\resource\secur ity.conf

Solaris:

/opt/HiCommand/Base/conf/sec/resou rce/security.conf




/Base/conf/sec/resource/se curity.conf






Error Code

KAPM08911-E

KAPM08912-E

KAPM08913-E

KAPM08914-E

KAPM08915-E

KAPM08980-E

KAPM08999-E

KAPM09062-E

Error Message



Null is specified for the argument.(aa...aa)

aa...aa: Arguments


A value is invalid.(aa...aa, bb...bb)

aa...aa: Key

bb...bb: Value




There is an invalid statement in the configuration file of HBase Storage

Mgmt Web Service.


An attempt to acquire

RequestDispatcher has failed.

aa...aa: Jsp name


aa...aa







Logout, then login.





A value is invalid.


There is an invalid statement in the configuration file of HBase Storage Mgmt

Web Service.

The Listen definition in httpsd.conf, the configuration file of HBase Storage Mgmt

Web Service, is invalid.

Revise httpsd.conf as follows, and then restart all Suite products, Single Sign On

Server, and Common Web Service:

(1) Make sure that the Listen definitions of IPv4 non-SSL ports are written before other Listen definitions.

(2) Make sure that the value specified for the Listen definition of IPv4 non-SSL ports are valid values.

An attempt to acquire RequestDispatcher has failed.


Detailed information for KAPMxxxxx-E.


See the message KAPMxxxxx-E.





8-211

Error Code

KAPM09064-E

Error Message



KAPM09065-E

KAPM09066-E

KAPM09067-E







KAPM09068-E

KAPM09069-E

KAPM09070-E

KAPM10009-E

KAPM10011-E

KAPM10012-E

An attempt to read a file has failed.


An attempt to output a file has failed.




The specified authorization group already exists. (distinguished name =

aa...aa)

aa...aa: distinguished-name




aa...aa: domain-name


The information search user is not registered. (domain name = aa...aa)






Support Center.







Support Center.

An attempt to read a file has failed.


An attempt to output a file has failed.




The specified authorization group already exists.

Revise the name of the external authentication group.


Check the settings for the information search user, the settings of exauth.properties, and the operation of the external authentication server.

Authentication of the information search user has failed.

Register the information search user.




KAPM10013-E

KAPM10014-E

KAPM10015-E

KAPM10016-E

An attempt to search for the specified distinguished name has failed.




DNS communication with the external authentication server has failed.




The SRV record in the LDAP server is not registered. (distinguished name =

aa...aa, domain name = bb...bb)


bb...bb: domain-name


A DNS error has occurred.

(distinguished name = aa...aa, domain name = bb...bb)




KAPM10017-W The length of the specified distinguished name is invalid. (line number = aa...aa, distinguished name = bb...bb)

aa...aa: line number

bb...bb: distinguished-name


KAPM10022-E

The SRV record of the Kerberos server is not registered in DNS. (distinguished name = aa...aa, domain name =

bb...bb)




An attempt to search for the specified distinguished name has failed.

Confirm that the external authentication server is operating normally.

DNS communication with the external authentication server has failed.

Revise the settings and IP address of the external authorization server.

The SRV record in the LDAP server is not registered.

Revise the SRV record settings for the

LDAP server on DNS.

A DNS error has occurred.

Revise the DNS settings.

The length of the specified distinguished name is invalid.

Revise the length of specified distinguished name.

The SRV record of the Kerberos server is not registered in DNS.

Revise the SRV record settings for the

Kerberos server on DNS.



8-213

Error Code

KAPM10029-E

KAPM10034-E

Error Message

The specified Distinguished Name cannot be found. (Distinguished Name =

aa...aa)

aa...aa: Distinguished Name



The specified Distinguished Name cannot be found.

Check that the Distinguished Name for the specified group is correct. If it is correct, confirm that the information search user has been granted the following permissions:





Retrieval permission for the attribute to be retrieved

Reference permission for

Distinguished Names for groups

The specified Distinguished Name already exists.

Check that the specified Distinguished

Name is correct.

KAPM10030-W The specified Distinguished Name already exists. (Distinguished Name =

aa...aa)



KAPM10031-E

KAPM10032-E

The specified Distinguished Name already exists in another domain.

(Distinguished Name = aa...aa)



The operation cannot proceed because the external authentication group linkage function is disabled.


KAPM10033-E No groups that the user belongs to are registered. (user name = aa...aa)



The specified Distinguished Name already exists in another domain.

Check that the specified Distinguished

Name is correct.

The operation cannot proceed because the external authentication group linkage function is disabled.

Enable the external authentication group linkage function.

No groups that the user belongs to are registered.

Register a group that the user belongs to and that is on the external authentication server, and then grant the proper permissions to the group.

No groups that the user belongs to exist.

Add the user to an appropriate group on the external authentication server.

KAPM10100-E

No groups that the user belongs to exist. (user name = aa...aa)



Authentication was canceled because a search user has not been registered.

(domain name = aa...aa, host =

bb...bb, port = cc...cc, protocol =

dd...dd)


bb...bb: Host

cc...cc: Port

dd...dd: Protocol


Authentication was canceled because the search user has not been registered.

Make sure the search user has been registered.



Error Code

KAPM10101-E

KAPM10102-I

KAPM10103-E

KAPM10104-E

KAPM10105-E

Error Message

Authentication was canceled because a setting in the configuration file for the external authentication server

( exauth.properties

) is invalid.



Authentication was canceled because a setting in the configuration file for the external authentication server

( exauth.properties

) is invalid.


( exauth.properties

).

The group information was acquired from an LDAP server.

The group information was acquired from the LDAP server. (domain name =

aa...aa, host = bb...bb, port = cc...cc, protocol = dd...dd, basedn = ee...ee)


bb...bb: Host

cc...cc: Port

dd...dd: Protocol

ee...ee: BaseDN


Acquisition of group information failed.

(userId = aa...aa, domain name =

bb...bb, host = cc...cc, port = dd...dd, protocol = ee...ee, basedn = ff...ff)

aa...aa: User ID

bb...bb: Domain name

cc...cc: Host

dd...dd: Port

ee...ee: Protocol

ff...ff: BaseDN


Confirmation of the existence of a group failed because a setting in the configuration file for the external authentication server

( exauth.properties

) is invalid or a search user setting is invalid.


A search user has not been registered.




Acquisition of group information has failed.


( exauth.properties

).

Confirmation of the existence of a group failed because a setting in the configuration file for the external authentication server

( exauth.properties

) is invalid or a search user setting is invalid.


( exauth.properties

) and the search user settings.

The search user has not been registered.

Make sure the search user has been registered.



8-215

Error Code

KAPM10106-I

KAPM10112-I

KAPM10114-E

KAPM10115-E

KAPM15002-I

KAPM15003-I

KAPM15004-I

Error Message

The existence of a group was successfully confirmed. (groupDN =

aa...aa, domain name = bb...bb, host =

cc...cc, port = dd...dd, protocol =

ee...ee)

aa...aa: GroupDN

bb...bb: Domain name

cc...cc: Host

dd...dd: Port

ee...ee: Protocol


Authentication by a search user was successful. (host=aa...aa, port=bb...bb,protocol=cc...cc)

aa...aa: Host

bb...bb: Port

cc...cc: Protocol


Authentication stopped because a setting in the configuration file for the external authentication server

(exauth.properties) or a search user setting is invalid.


The Kerberos realm, KDC, or a search user definition is invalid. (realm name =

aa...aa)

aa...aa: realm-name


The hcmdscheckauth command will now start.


The configuration check of aa...aa will now start.

aa...aa: Phase number


The result of the configuration check of

aa...aa was normal.




The existence of a group was successfully confirmed.

Authentication by a search user was successful.

Authentication stopped because a setting in the configuration file for the external authentication server

( exauth.properties

setting is invalid.

) or a search user

Revise the exauth.properties

file or the search user definition.

The Kerberos realm, KDC, or a search user definition is invalid.

Check and, if necessary, revise the exauth.properties

file realm, the KDC or a search user definition.

The hcmdscheckauth command will now start.

The configuration check will now start.

The result of the configuration check was normal.



Error Code

KAPM15005-E

KAPM15006-I

KAPM15007-I

KAPM15008-E

KAPM15009-I

KAPM15010-I

KAPM15011-I

KAPM15012-E

Error Message

The result of the configuration check of

aa...aa was abnormal.



The configuration of the server aa...aa will now be checked.



The result of the configuration check of the server aa...aa was normal.



The result of the configuration check of the server aa...aa was abnormal.



The configuration check of aa...aa has finished normally.



The connection to the server aa...aa will now be checked. (host = bb...bb, port number = cc...cc, protocol = dd...dd)


bb...bb: Host name

cc...cc: Port number

dd...dd: Protocol


The server aa...aa can be connected to normally.



The result of checking the connection to the server aa...aa indicated an error. aa...aa: Server name



The result of the configuration check was abnormal.

See the immediately preceding message

KAPMxxxxx-E.

The configuration of the server will now be checked.

The result of the configuration check of the server was normal.

The result of the configuration check of the server was abnormal.

See the immediately preceding message

KAPMxxxxx-E.

The configuration check has finished normally.

The connection to the server will now be checked.

The connection to the server has been checked successfully.

An attempt to check the connection to the server has failed.

Refer to error message KAPM15010-I and the related messages that follow it.



8-217

Error Code

KAPM15013-E

KAPM15015-I

Error Message

A connection error occurred.



The command hcmdscheckauth will now finish.



A connection error occurred.

Make sure that the external authentication server is running correctly, and then perform one of the following procedures:

For LDAP:

If the message KAPM15084-E is displayed after this message, the message KAPM15084-E shows the details of the LDAP connection error. Please refer to the following and correct the problem:

1. Make sure that the host or IP address, along with the port and protocol specified in exauth.properties are correct.

2. Make sure that the network is correctly connected.

3. Check the firewall settings.

4. Make sure that the LDAP directory server is compatible with the LDAPv3 protocol.

5. Check the SSL settings for when

StartTLS is being used. For StartTLS, specify the host, not the IP address.


For RADIUS:

1. Make sure that the host or IP address, port name, and protocol specified in exauth.properties are correct.

2. Check and then respecify the client secret set for the external authentication server and the secret set for the client.





Make sure that the user who made the specification is registered in the external authentication server.

The command hcmdscheckauth will now finish.



Error Code

KAPM15016-E

KAPM15017-E

Error Message

A file was not found. (file name =

aa...aa) aa...aa: File name


A file could not be read. (file name =

aa...aa)



The settings of the external authentication server are invalid.



A file was not found.

Make sure that the file exists in the specified folder.

A file could not be read.


KAPM15018-E

KAPM15019-E

KAPM15020-E

The configuration file contains a syntax error. (line number = aa...aa, value =

bb...bb)

aa...aa: Line number

bb...bb: Value


The same property key already exists.

(line number = aa...aa, key = bb...bb)


bb...bb: Key


KAPM15021-E A required parameter has not been specified. (key = aa...aa)

aa...aa: Key


KAPM15022-W An optional parameter has been omitted. (value = aa...aa)

aa...aa: Value


KAPM15023-W A property key cannot be identified.

(line number = aa...aa)



KAPM15024-E A secret does not exist.


The settings of the external authentication server are invalid.

Check and revise the configuration file, specifying valid settings for the external authentication server.

The configuration file contains a syntax error.

The value bb...bb on line aa...aa caused a syntax error. Check and, if necessary, revise the configuration file, and then retry the operation.

The same property key already exists.

The key bb...bb on line aa...aa is a duplicate. Check and, if necessary, revise the configuration file, and then retry the operation.

A required parameter has not been specified.

Specify all required parameters, and then retry the operation.

An optional parameter has been omitted.

(value = aa...aa)

A property key cannot be identified.

Check and, if necessary, review the settings in the configuration file for the external authentication server.

A secret does not exist.

Specify a secret, and then retry the operation.



8-219

Error Code

KAPM15025-E

KAPM15026-E

KAPM15027-E

KAPM15028-E

KAPM15029-E

KAPM15030-I

KAPM15031-E

KAPM15032-E

Error Message

No connection could be made from the secondary server.








The value of hcmds.home could not be acquired.


Processing has finished normally.



The configuration file was not found.





No connection could be made from the secondary server.

Connect from the primary server.




Check and, if necessary, revise the specified options.


Specify all required options.



Processing has finished normally.



The configuration file was not found.

Confirm that the file exists, that the file is not in use.



Error Code

KAPM15033-E

KAPM15034-E

KAPM15035-I

KAPM15036-E

Error Message

An error occurred on the aa...aa server.



Authentication information cannot be acquired. (server name = aa...aa)




A server error occurred.


For LDAP:





For RADIUS:




Authentication information cannot be acquired.

Use the hcmdsldapuser

or hcmdsradiussecret

command to reset the authentication information. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.

Authentication information has been acquired.

Authentication information has been acquired.





Use the hcmdsldapuser or hcmdsradiussecret command to reset the authentication information.




8-221

Error Code

KAPM15037-E

KAPM15039-I

KAPM15040-E

KAPM15041-E

Error Message

Specify a value for at least one key.

(key = aa...aa)

aa...aa: Key


A connection was successfully established. (server name = aa...aa)



A connection attempt has failed. (server name = aa...aa)



Authentication has failed. (server name

= aa...aa)




Specify a value for at least one key.

Specify key values, and then retry the operation.

A connection was successfully established.

A connection attempt has failed.


For LDAP:

1. Make sure that the host or IP address, along with the port and protocol specified in exauth.properties are correct.






For RADIUS:

1. Make sure that the host or IP address, port name, and protocol specified in exauth.properties are correct.





See the KAPMxxxxx-E message of the server aa...aa, above.



Error Code

KAPM15042-E

KAPM15043-E

KAPM15044-E

KAPM15045-E

KAPM15046-E

KAPM15047-I

KAPM15049-E unknown.

Error Message

A syntax error occurred. (server name =

aa...aa)



A check cannot be performed because the external authentication server type is unknown.


A check cannot be performed because the server identification name is


A parameter has not been specified.

(key = aa...aa)

aa...aa: Key


An invalid value has been specified for a parameter. (key aa...aa)

aa...aa: Key


The authentication method will now be internal authentication.


The configuration file could not be accessed. (File name = aa...aa)




unknown.

If necessary, revise the value of operation.

A syntax error occurred.

See the KAPMxxxxx-E message of the server aa...aa, above.

A check cannot be performed because the external authentication server type is auth.server.type, and then retry the

A check cannot be performed because the server identification name is unknown.

If necessary, revise the value of auth.server.name, and then retry the operation.

The value for a parameter has not been specified.

Specify the value of the parameter aa...aa, and then retry the operation.

An invalid value has been specified for a parameter.

If necessary, revise the value of the parameter aa...aa, and then retry the operation.

The authentication method will now be internal authentication.

The configuration file could not be accessed.

Make sure that the configuration file exists, that you have access permissions for this file, and that the file is not in use.



8-223

Error Code

KAPM15050-E

KAPM15051-E

Error Message

Authentication of the user account used for information searching has failed.


The DN of the user account used for information searching was not found.



Authentication of the user account used for information searching failed.



For LDAP hierarchical structure model:



Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the hcmdsldapuser command.

For LDAP flat model:



Using the hcmdsldapuser

command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.







Make sure the DN of the user account used for information searching is correct, and then re-execute the command hcmdsldapuser

.









KAPM15052-E

Authentication of the specified user has failed.


Authentication of the specified user failed.


For LDAP:


1. Make sure the user is specified correctly. The user must be specified using only the user name, not the

DN format.

2. Make sure the password for the specified user is correct.

3. Make sure the specified user is registered on the external authentication server and is enabled.

4. Check, and if necessary, revise the values of basedn and attr for the corresponding server in exauth.properties.

5. If an LDAP hierarchical structure model is used, check the following:

- Using the hcmdsldapuser

command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is registered.

- Make sure the user who is used for searching for information has the correct permissions.

6. If an LDAP flat model is used, check the following:



7. If this does not resolve the problem, acquire the maintenance information, and then contact the

Support Center.

For RADIUS:

1. Make sure the user is specified correctly.

2. Make sure the password of the specified user is specified correctly.


4. Make sure that the PAP and CHAP settings are valid.

5. If this does not resolve the problem, acquire the maintenance

Error Messages from the Hitachi Storage Command Suite Common Component 8-225



Error Code

KAPM15053-E

Error Message







1. Make sure the user is specified correctly. The user must be specified using only the user name, not the DN format.

2. Make sure that the specified user is registered in the external authentication server and is enabled.

3. Check, and if necessary, revise the values of basedn and attr for the corresponding server in exauth.properties

.


Use the command hcmdsldapuser to make sure that the server name specified for the attribute auth.server.name

of exauth.properties

is registered.

Make sure that the user account used for information searching has the necessary permissions.


Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name

attribute of exauth.properties

is not registered.




Error Code

KAPM15054-E

Error Message

The specified user was not found. (error code = aa...aa)








DN format.




- Use the command hcmdsldapuser

to make sure that the server name specified for the attribute auth.server.name of exauth.properties is registered.

- Make sure that the user account used for information searching has the necessary permissions.







8-227

Error Code

KAPM15056-E

KAPM15057-E

KAPM15058-I

KAPM15059-E

KAPM15060-I

KAPM15061-E

Error Message



A dn value is invalid.




Perform the following:

1. Make sure that the specified user is registered in the external authentication server.

2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties.




Make sure the user who is used for searching for information has the correct permissions.



1. Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties.

2. If you use the hcmdsldapuser command to register the information for the server specified for the attribute auth.server.name in the file exauth.properties make sure you specify a valid value for the dn option.

The message outputs LDAP connection information.

The message outputs LDAP connection information. (aa...aa = bb...bb, aa...aa

= bb...bb, ......)

aa...aa: Key

bb...bb: Value


aa...aa

aa...aa: Error code details


The file targeted for generation management was successfully saved.


No file targeted for generation management exists.


This message displays details of the previous error message.

Take action according to the preceding message.

The file specified by the command was saved successfully.

The file specified by the command does not exist.

Correctly specify the path to the file to be saved.



Error Code

KAPM15062-E

KAPM15063-E

KAPM15064-E

KAPM15065-E

KAPM15066-W The specified number of generations exceeds the maximum (99).


KAPM15067-E

KAPM15068-E

KAPM15069-E

KAPM15070-I

Error Message

There is not enough free space to save the file.


The specified management target is a directory.


The permissions for the file to be managed are invalid.


An attempt to store the managed file has failed.


Creation of the directory has failed.






The hcmdsfilerotate started.

command has

Output destinations: Destinations for the

log.


There is not enough free space where the file is to be saved.

Secure enough disk space where the file is to be saved, and then re-execute the command.


A directory was specified for the argument of the option that specifies the file.

Specify the absolute path to the file to be saved.

The permissions for the file specified by the command are invalid.

Make sure that you have the permissions for the specified file, and then re-execute the command.


An attempt to save the specified file has failed.

Check the permissions and save destination for the specified file, and then re-execute the command. If you cannot resolve the problem, collect maintenance information, and then contact the

Support Center.

The value of the option that specifies the number of generations exceeds the maximum.

Specify a value from 2 to 98 for the number of generations.

Creation of the directory has failed.

Make sure that the location of the directory in which the specified file is to be saved is correct, and then re-execute the command.



Specify valid options.



The hcmdsfilerotate started.

command has



8-229


KAPM15071-I

KAPM15072-I

The hcmdsfilerotate ended.

command has


A file whose file number is 99 has been overwritten.


KAPM15073-W The command log cannot be output.


KAPM15074-E

KAPM15080-E

KAPM15081-E




(server name = aa...aa)







The hcmdsfilerotate ended.

command has

If the hcmdsfilerotate

command executes 99 times or more within one second, all copied files whose file number was equal to or more than 99 (which is the maximum file number) will be saved with the file number "99".

The command log cannot be output because an environment variable needed for the output is invalid.

Revise the values set for the environmental variables needed for the output of the command log. If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.

This message indicates that the value specified for an option is invalid.

Revise the values specified for the options.






Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the command. hcmdsldapuser











Make sure the DN of the user account used for information searching is correct, and then re-execute the command hcmdsldapuser

.




Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.



Error Code

KAPM15082-E

Error Message

Authentication of the specified user has failed. (server name = aa...aa)





Perform one of the following procedures for LDAP:


DN format.







- Make sure the user who is used for searching for information has the correct permissions.





Support Center.

For RADIUS:






Support Center.



8-231

Error Code

KAPM15083-E

KAPM15084-E

KAPM15085-E

Error Message









DN format.




- Use the command hcmdsldapuser to make sure that the server name specified for the attribute auth.server.name of exauth.properties is registered.

- Make sure that the user account used for information searching has the necessary permissions.


- Using the hcmdsldapuser command, confirm that the information for the server name specified to the auth.server.name attribute of exauth.properties is not registered.


LDAP directory server error is detected.

LDAP directory server error is detected.

(information = aa...aa)

aa...aa: Information


An SSL setting is invalid.


An SSL setting is invalid.

Check and, if necessary, revise the SSL settings.



Error Code

KAPM15086-E

KAPM15087-E

KAPM15088-I

KAPM15089-I

KAPM15090-E

KAPM15091-I

KAPM15092-I

Error Message





A dn value is invalid. (server name =

aa...aa)







2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties.







1. Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties.

2. If you use the hcmdsldapuser command to register the information for the server specified for the attribute auth.server.name in the file exauth.properties make sure you specify a valid value for the dn option.

The common-items check will now start. The common-items check will now start.


The results of the common-items check were normal.


The results of the common-items check include abnormal values.


The individual-realm check will now start.


The results of the realm identified name

aa...aa check were normal.

aa...aa: Realm identified name


The results of the common-items check were normal.

The results of the common-items check include abnormal values.


The individual-realm check will now start.


aa...aa check were normal.



8-233

Error Code

KAPM15093-E

KAPM15094-I

KAPM15095-E

KAPM15096-E

KAPM15097-E

KAPM15098-I

KAPM15102-I

KAPM15103-I

KAPM15104-E

Error Message


aa...aa check include abnormal values.

aa...aa: Realm identified name


The results of the individual-realm check were normal.


The results of the individual-realm check include abnormal values.


The same value already exists. (line number = aa...aa, value = bb...bb)


bb...bb: Value


There is no auth.kerberos.<realm identification name>.realm that corresponds to auth.kerberos.default_realm.


The server connection will now be checked. (user id = aa...aa, realm name

= bb...bb)

aa...aa: User ID

bb...bb: Realm name


The hcmdsunlockaccount started.

command has


The hcmdsunlockaccount finished.

command has


The hcmdsunlockaccount

command cannot be executed on the secondary server. Execute this command on the primary server.

Output destinations: Destinations for output level 10, and windows. finished.



aa...aa check include abnormal values.


The results of the individual-realm check were normal.

The results of the individual-realm check include abnormal values.


The same value already exists.

There are duplicate bb...bb values on line

aa...aa. Check and, if necessary, revise the configuration file, and then retry the operation.

There is no auth.kerberos.<realm identification name>.realm that corresponds to auth.kerberos.default_realm.

Specify auth.kerberos.<realm identification name>.realm as the realm that corresponds to auth.kerberos.default_realm in exauth.properties.

The server connection will now be checked.

The hcmdsunlockaccount started.

The

The hcmdsunlockaccount hcmdsunlockaccount

command has

command has

command cannot be executed on the secondary server. Execute this command on the primary server.

Execute the hcmdsunlockaccount command on the primary server.



Error Code

KAPM15105-E

KAPM15108-I

KAPM15109-I

KAPM15110-E

KAPM15111-E

KAPM15112-E

KAPM15113-E

KAPM15114-E

KAPM15115-E

KAPM15116-E

KAPM15117-E

KAPM15118-E

Error Message

The user account to be unlocked does not have the User Management permission.


The user account was unlocked successfully.


The user account "aa...aa" will now be unlocked.





A command option is invalid.






Communication with the authentication server has failed.


The user ID or password is incorrect.






An HcmdsIllegalArgumentException occurred.



The user account to be unlocked does not have the User Management permission.

Specify a user who has the User


The user account was unlocked successfully.

The user account "aa...aa" will now be unlocked.



A command option is invalid.

Check the options.


Check the options.



Communication with the authentication server has failed.

Make sure the HBase Storage Mgmt

Common Service or the HBase Storage

Mgmt Web Service on the server has started.

The user ID or password is incorrect.

Make sure that the user ID and password are correct.





An HcmdsIllegalArgumentException occurred.




8-235


KAPM15119-E

KAPM15120-E

KAPM15170-E





Acquisition of the installation path has failed.


KAPM15171-E The command aa...aa will stop because internal processing failed. (details =

bb...bb)


bb...bb: Details


KAPM15172-W Log initialization failed.


KAPM15173-E

KAPM15174-E

KAPM15175-E

KAPM15200-I





Acquisition of the installation path has failed.


The specified command will stop because internal processing failed.




The command aa...aa will stop because setting of an environment variable failed. (details = bb...bb)


bb...bb: Details



(function = aa...aa, error code =

bb...bb)

aa...aa: Function



A connection was successfully established. (KDC = aa...aa)

aa...aa: KDC



If the problem occurs frequently, collect maintenance information, and then contact the Support Center.



The command will stop because setting of an environment variable failed.







Error Code

KAPM15201-E

KAPM15202-E

KAPM15203-E

KAPM15204-E

KAPM15205-E


An attempt to connect failed. (KDC =

aa...aa)

aa...aa: KDC


An attempt to connect to the DNS server failed.


On the DNS server,the SRV record corresponding to the realm name is not defined. (realm name = aa...aa)



An unexpected error occurred on the

DNS server.


The KDC resolution failed. (KDC =

aa...aa)

aa...aa: KDC


An attempt to connect failed.

Make sure that the external authentication server is running correctly, and then perform one of the following:

1. Make sure that the realm name and

KDC specified in exauth.properties are correct.

2. Make sure that the network is connected correctly.


4. Make sure that Kerberos is compatible with the external authentication server.



Check and, if necessary, revise the DNS server settings.

On the DNS server,the SRV record corresponding to the realm name is not defined.




Make sure that the realm name is correct.



On the DNS server, define the SRV record corresponding to the realm name.


DNS server.


The KDC resolution failed.




8-237

Error Code

KAPM15206-E

KAPM15207-E

KAPM15208-E

KAPM15209-E

KAPM15210-E

KAPM15211-E

KAPM15212-I

KAPM15213-I

Error Message

An attempt to authenticate failed. (KDC

= aa...aa)

aa...aa: KDC



An attempt to authenticate failed.






Make sure the specified user is registered on the external authentication server.

Check the password of the specified user.







Make sure the time difference between servers not exceeds the specified value in the exauth.properties

.

Make sure the authentication user password has not expired.

Make sure the authentication user account is not invalid.


Make sure the specified user is registered on the external authentication server.

The specified user was not found. (KDC

= aa...aa)

aa...aa: KDC


The specified password is invalid. (KDC

= aa...aa)

aa...aa: KDC


The time difference between servers exceeds the specified value in the exauth.properties. (KDC = aa...aa)

aa...aa: KDC


The authentication user password has expired. (KDC = aa...aa)

aa...aa: KDC


The authentication user account is invalid. (KDC = aa...aa)

aa...aa: KDC


Check the DNS server to confirm the connection status.


Use the default realm to confirm the connection status.



Check the password of the specified user.

The time difference between servers exceeds the specified value in the exauth.properties.

Make sure that the server times are synchronized.

The authentication user password has expired.

Change the password of the specified user.

The authentication user account is invalid.

Validate the registered user on the external authentication server.

Check the DNS server to confirm the connection status.

Use the default realm to confirm the connection status.



Error Code

KAPM15214-E

KAPM15215-E

KAPM15216-E

Error Message

The command cannot be executed on the secondary server.


Creation of the file failed. (file name =

aa...aa)

aa...aa: File name




KAPM15217-W The DBMS is not running.


KAPM15218-W The DBMS is blocked.


KAPM15219-W An error occurred while the DBMS was being accessed.



The command cannot be executed on the secondary server.

Creation of the file failed.








Make sure the file path is correct.

Make sure you have permission to create a file on the specified path.

Make sure there are no files that have the same name as the specified file.




Make sure that the DBMS is running.

The DBMS is blocked.


An error occurred while the DBMS was being accessed.

Make sure that the DBMS, HBase Storage

Mgmt Web Service, and HBase Storage

Mgmt Common Service are running. If they are running, collect maintenance information, and then contact the

Support Center.

The user to be authenticated was not found in the DBMS. (user id = aa...aa)

Make sure aa...aa is registered in the

DBMS.

KAPM15220-W The user to be authenticated was not found in the DBMS. (user id = aa...aa)

aa...aa: User ID


KAPM15221-W An unexpected error occurred on the

DBMS.


KAPM15222-E Acquisition of the KDC from aa...aa failed.




DBMS.

Retry. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.

Acquisition of the KDC from aa...aa failed.




Make sure that the realm name is correct.



Make sure that there is a KDC corresponding to the realm name.



8-239

Error Code

KAPM15223-E

KAPM15229-I

An unexpected error occurred. (KDC =

aa...aa)

aa...aa: KDC


KAPM15224-W The specified user is not registered in the DBMS as a user of the Kerberos authentication method. (user id =

aa...aa)

Error Message

aa...aa: User ID


KAPM15225-W The configuration file contains a syntax error. (line number = aa...aa, value =

bb...bb)


bb...bb: Value


KAPM15226-E An information search user is not registered. (aa...aa = bb...bb)

aa...aa: Property name

bb...bb: Property value


KAPM15227-I Group linkage is enabled.


KAPM15228-W The external authentication group was not linked to because an authentication user was found on the DBMS.



An unexpected error occurred. (KDC =

aa...aa)

Retry. If you cannot resolve the problem, collect maintenance information, and then contact the Support Center.

The specified user is not registered in the

DBMS as a user of the Kerberos authentication method. (user id =

aa...aa)






Change the specified user authentication method to Kerberos.

Create a new user of the Kerberos authentication method.

The configuration file contains a syntax error.

The value bb...bb on line aa...aa caused a syntax error. Check and, if necessary, revise the configuration file, and then retry the operation.

An information search user is not registered.

Register an information search user for

bb...bb.

Group linkage is enabled.

Group acquisition for the server will now be checked. (aa...aa = bb...bb, host =

cc...cc, port = dd...dd, protocol =

ee...ee)



cc...cc: Host name

dd...dd: Port number

ee...ee: Protocol


The external authentication group was not linked to because an authentication user was found on the DBMS.

When linking to an external authentication group, specify a user not registered in Hitachi Storage Command

Suite.

Group acquisition for the server will now be checked.



Error Code

KAPM15230-I

KAPM15231-E

Error Message

Group acquisition was successful.


Group acquisition failed.




KAPM15232-E The group was not registered.


KAPM15233-E On the DNS server, the SRV record corresponding to the domain name is not defined. (domain name = aa...aa)




Perform one of the following actions:





Make sure that the specified user is registered in a group.

Check, and if necessary, revise the values of basedn for the corresponding server in exauth.properties

.

The group was not registered.

Register the group to the specified user.

Alternatively, specify the user to whom the group is registered.

On the DNS server, the SRV record corresponding to the domain name is not defined.




On the DNS server, define the SRV record corresponding to the domain name.



Make sure that the domain name is correct.

The DNS server has been referenced. KAPM15234-I

KAPM15235-E

The DNS server has been referenced.

(aa...aa = bb...bb, domain name =

cc...cc)



cc...cc: Domain name


A server error occurred. (aa...aa =

bb...bb)




A server error occurred.


1. By using the host, port, and protocol set in " exauth.properties

", check whether the authentication server can be accessed, the settings of the external authentication server, and the status of the network.

2. By using the hcmdsldapuser command, check that the information for the server names specified in the

" auth.server.name

" attribute in

"exauth.properties" is registered.





8-241

8-242

Error Code

KAPM15236-E

KAPM15237-I

KAPM15238-E

KAPM15239-E

KAPM15240-E

KAPM15241-E

KAPM15242-E

KAPM15243-E


A check cannot be performed because the group definition is invalid.



(aa...aa = bb...bb)




Group acquisition failed. (aa...aa =

bb...bb)




The group was not registered. (aa...aa =

bb...bb)




On the DNS server,the SRV record corresponding to the domain name is not defined. (aa...aa = bb...bb)




A check cannot be performed because the group definition is invalid.

Revise the auth.group.mapping value, and then retry the operation.








Make sure that the specified user is registered in a group.

Check, and if necessary, revise the values of basedn for the corresponding server in exauth.properties

.

The group was not registered.

Register the group to the specified user.

Alternatively, specify the user to whom the group is registered.

On the DNS server,the SRV record corresponding to the domain name is not defined.




On the DNS server, define the SRV record corresponding to the domain name.



Make sure that the domain name is correct.



An attempt to connect to the DNS server failed. (aa...aa = bb...bb)





DNS server. (aa...aa = bb...bb)




The common items cannot be checked because they are not set correctly.



DNS server.


The common items cannot be checked because they are not set correctly.

Revise the settings for the common items, and then retry the operation.



Error Code

KAPM15244-I

KAPM15245-I

KAPM15246-E


The connection for realm aa...aa was checked.



A connection was successfully established. (aa...aa = bb...bb)




A connection attempt has failed. (aa...aa

= bb...bb)




The connection for realm aa...aa was checked.


A connection attempt has failed.


For LDAP:

1. Make sure that the host or IP address, along with the port and protocol specified in exauth.properties

are correct.






For RADIUS:

1. Make sure that the host or IP address, port name, and protocol specified in exauth.properties

are correct.






8-243

Error Code

KAPM15247-E

KAPM15248-E

Error Message


(aa...aa = bb...bb)





(aa...aa = bb...bb)










Make sure the DN and the password of the user who is used for searching for information are correct, and then re-execute the hcmdsldapuser command.






is not registered.






Make sure the DN of the user account used for information searching is correct, and then re-execute the command

hcmdsldapuser

.





command, confirm that the information for the server name specified to the auth.server.name


is not registered.



Error Code

KAPM15249-E

Error Message

Authentication of the specified user has failed. (aa...aa = bb...bb)






Perform one of the following procedures for LDAP:





.





is registered.






is not registered.

7. If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.

For RADIUS:





5. If this does not resolve the problem, acquire the maintenance information, and then contact the Support Center.



8-245

Error Code

KAPM15250-E

Error Message


(aa...aa = bb...bb)




KAPM15251-E The specified user was not found.

(aa...aa = bb...bb)










.


Use the command hcmdsldapuser to make sure that the server name specified for the attribute auth.server.name

of exauth.properties

is registered.

Make sure that the user account used for information searching has the necessary permissions.




is not registered.





2. Check, and if necessary, revise the basedn and attr values for the corresponding server in exauth.properties

.




is registered.




Error Code

KAPM15252-E

KAPM49001-E

Error Message

A dn value is invalid. (aa...aa = bb...bb) aa...aa: Property name bb...bb: Property value


aa...aa






1. Check, and if necessary, revise the basedn value for the corresponding server in the file exauth.properties

.

2. If you use the hcmdsldapuser command to register the information for the server specified for the attribute a uth.server.name

in the file exauth.properties

make sure you specify a valid value for the dn option.

Detailed information for KAPMxxxxx-E.


See the message KAPMxxxxx-E.



8-247


Messages (KDJE)


KDJE41000-E Failed to connect to web container. errno=aa...aa, bb...bb, cc...cc

aa...aa: System-specific error number

bb...bb: Web container IP address used to communicate with the web server

cc...cc: Web container port number used to communicate with the web server


aa...aa: Worker name


KDJE41002-E Could not redirect the request to worker.

Because redirector could not access the definition file : aa...aa



KDJE41003-

W

Invalid parameter value is specified in

aa...aa file : (bb...bb=cc...cc). Default parameter value is used : dd...dd


bb...bb: Parameter name

cc...cc: Value

dd...dd: Default value


KDJE41004-E Could not redirect the request to a worker because request header was too long.


Recommended Action

An attempt to connect to the web container has failed.

Make sure that:

1. The worker port number is correct.

2. The worker host name or IP address is correct.

3. The queue for web container execution does not exceed the maximum limit.

4. The web container has started.

Remove the cause of the error by following the error's system-specific error number (this is a value defined in errno.h in a UNIX system, and the return value of WSAGetLastError() in a

Windows system).

An error occurred while communicating with the worker.

An error occurred while communicating to worker aa...aa. Follow the message last output (such as KDJE41000) to solve the problem.

The request could not be redirected to the worker because the redirector could not access the definition file.

The definition file of aa...aa could not be accessed. Check the access permissions and whether the definition file exists, and restart the web server.

The value specified in the parameter is invalid. The default value will be used.

To change the value of the bb...bb parameter of aa...aa file from the default value to an appropriate value, and restart the web server.

The redirector could not make a request to the worker, because the header size of the HTTP request is too large.

Remove the cause of the overly large

HTTP request header, and re-access the worker. A possible cause is that the

HTTP GET method is being used instead of the POST method.




KDJE41005-E Could not redirect the request to a worker because worker name which is specified in the mapping definition file was not defined to worker.list parameter in the workers definition file. (worker name=aa...aa)

aa...aa: Worker name


KDJE41006-E Could not redirect the request to a worker because a required parameter was not specified in the workers definition file.

(parameter=aa...aa)



KDJE41007-E Could not redirect the request to a worker because invalid value was specified in the workers definition file.

(parameter=aa...aa,value=bb...bb)


bb...bb: Value


KDJE41008-

W

Invalid parameter value is specified in the workers definition file

(parameter=aa...aa,value=bb...bb).

Default parameter value is used : cc...cc


bb...bb: Value

cc...cc: Default value


KDJE41009-E Could not create worker because it is out of memory.



The redirector cannot redirect the request to the worker because the worker specified in the mapping definition file is not defined in the worker.list parameters.

Specify the worker name (aa...aa) defined in the mapping definition file

(default name: uriworkermap.properties

) in the worker.list parameters of the worker definition file (default name: uriworkermap.properties

), and restart the web server.

The redirector cannot redirect the request to the worker because a required parameter has not been specified in the worker definition file.

Specify the aa...aa parameter in the worker definition file (default name: workers.properties), and restart the web server.

The redirector could not redirect the request to the worker because the parameter value specified in the worker definition file is invalid.

Specify an appropriate value for the worker definition file (default name: workers.properties

) parameter

(aa...aa), and restart the web server.

The parameter value specified in the worker definition file is invalid. The default value will be used.

To change the worker definition file

(default name: workers.properties

) parameter (aa...aa) from the default value, specify an appropriate value in the aa...aa parameter, and restart the web server.

The worker could not be created because memory is insufficient.

Memory has become insufficient. Secure more memory for the system, and restart the web server. This happens when a value specified in the worker definition file parameter

( worker.

worker-name

.cachesize

) is too large. The worker.

workername

.cachesize

value consumes memory as per the following formula:

Memory consumption =

( worker.

worker-name

.cachesize

value) * 10 kilobytes



8-249


KDJE41010-E Failed to connect to web client. errno=aa...aa

aa...aa: System-specific error number


KDJE41012-E The uri pattern that does not start with '/' was specified in the aa...aa file. This parameter is ignored(bb...bb to cc...cc).


bb...bb: URI pattern

cc...cc: Worker name


KDJE41016-E Could not redirect the request because it is out of memory.


No message

ID

The service named aa...aa reported the following error:>>> bb...bb <<<before the error.log file could be opened.More information may be available in the error.log file.

aa...aa: Name of the executable file of

HBase Storage Mgmt Web Service

bb...bb: Message text

Output to event log


An attempt to communicate with the client that submitted the requested has failed.

The client who submitted the request may have stopped during communication. Remove the cause of the error by following the error's system-specific error number (this is the definition value of errno.h in a UNIX system, and the return value of

WSAGetLastError() in a Windows system).

The URI pattern specified in the definition file does not start with the "

/

" character. This parameter will be ignored.

To validate the specified URI pattern and worker name, start the bb...bb URI pattern of the aa...aa file with a "

/

" character, and restart the web server.

The redirector cannot transfer the request because memory is insufficient.

Memory has become insufficient. Secure more memory for the system, and restart the web server.

The error described in bb...bb occurred before the log file (error.log) was opened.

Remove the error cause indicated by the message text, and restart the

HBase Storage Mgmt Web Service.




Messages (KEHG)

Error Code

KEHG00101-E

KEHG00102-E

KEHG00103-E

KEHG00104-E

KEHG00105-E

KEHG05710-E

KEHG05711-E

KEHG05712-E

KEHG05713-E

KEHG05714-E

KEHG05715-E


An empty string or null was specified for the element name.


An empty string or null was specified for the attribute name.


An object in PageContext

(aa...aa) is invalid.

aa...aa: Name of the invalid object


The specified application name is invalid.


The parts initialization has not been performed.


The first column cannot be a value.


Values cannot be used for two consecutive columns.


The last column cannot be a label.


The first line cannot be a value line.


Value lines cannot be used for two consecutive lines.


The last line cannot be a label line.






An object in PageContext (aa...aa) is invalid.


The specified application name is invalid.


The parts initialization has not been performed.


The first column cannot be a value.


Values cannot be used for two consecutive columns.


The last column cannot be a label.


The first line cannot be a value line.


Value lines cannot be used for two consecutive lines.


The last line cannot be a label line.




8-251

8-252


KEHG05901-E

KEHG05902-E

KEHG06500-E

Neither postName nor url has been specified.

Output destinations: Destinations for output level 10. postValue was specified without postName being specified.


Neither postName nor the URL parameter have been specified.


KEHG07501-W The file "aa...aa" could not be read. Path = bb...bb Detail:

cc...cc


bb...bb: Path

cc...cc: Error information


KEHG07502-E Authentication failed.


KEHG07504-E

KEHG08301-E

KEHG08302-E

KEHG08303-E

KEHG08304-E

An attempt to acquire the link and launch information failed. PP Type

= aa...aa

aa...aa: PP type


An attempt to read the file

(aa...aa) has failed.

aa...aa: Name of the file that could not be read


The specified application name is not registered in HiCommand

Suite Common Component.


An attempt to authenticate

HiCommand Suite Common

Component has failed.


An attempt to communicate with the HiCommand Suite Common

Component has failed.



Neither postName nor url has been specified.

Check the JPS coding. postValue was specified without postName being specified.

Check the JPS coding.

Neither postName nor the URL parameter have been specified.








An attempt to read the file (aa...aa) has failed.


The specified application name is not registered in Hitachi Storage Command Suite

Common Component.


An attempt to authenticate Hitachi Storage

Command Suite Common Component has failed.


An attempt to communicate with Hitachi

Storage Command Suite Common Component has failed.




Error Code

KEHG08305-E

KEHG20101-E

KEHG20102-E

KEHG90003-E

KEHG90004-E

KEHG90005-E

KEHG90006-E

Error Message

An error occurred in the H

HiCommand Suite Common

Component.






An unexpected tag was detected.

(tag name: aa...aa, attribute value: bb...bb = cc...cc, ... expected tag name: dd...dd, ...)

aa...aa: Unexpected tag name

bb...bb: Attribute name of aa...aa

cc...cc: Value of the attribute name bb...bb

dd...dd: Expected tag name


An unexpected value was detected for a variable. (variable name = aa...aa, value = bb...bb)

aa...aa: Variable containing the unexpected value

bb...bb: Value of the unexpected variable



(aa...aa)

aa...aa: Error information


A resource file corresponding to the specified locale (aa...aa) was not found.

aa...aa: Locale name



An error occurred in Hitachi Storage

Command Suite Common Component.






An unexpected tag was detected.


An unexpected value was detected for a variable.




A resource file corresponding to the specified locale (aa...aa) was not found.




8-253



HiCommand® Device Manager Error Codes

Error Messages from the Hitachi

Storage Command Suite Common

Component

Error Messages Output by Hitachi Storage Command Suite

Common Component

Key Features

Frequently Answers and Questions

What is the Hitachi Device Manager?

What are the main functions of the Hitachi Device Manager?

What types of storage devices can be managed by the Hitachi Device Manager?

How can I access the Hitachi Device Manager?

Table of contents