advertisement
DVRN960 User
’s Manual
5.3.6 Take a Snapshot
Snapshot is a simple screen capture tool. When users click on the
SNAPSHOT button, it will capture the screenshot of the window that is currently showing on the screen. Each click captures one screenshot to be saved as a JPEG file on the desktop. The snapshot file will be named as
“Snapshot-*”.
NOTE: To ensure that the snapshot files can be saved on the desktop, users must run IE as administrator. To run IE as administrator, right click on the IE browser icon on the desktop and select “Run As
Administrator” to launch IE.
5.3.7 Health Status
This function verifies the HDD status of the DVR. The information items in the status chart are described as below.
Device Name
This item shows the model name of the HDD.
Int./Ext.
This item indicates whether the HDD is an internal or external device.
Total Size
This item indicates the total size of the HDD.
State
This item indicates whether the HDD is active or non-active.
Temperature
This item indicates the current temperature of the HDD in Celsius degree.
64
advertisement
Related manuals
advertisement
Table of contents
- 8 Overview
- 9 System Setup
- 9 Position the Unit
- 9 Connect Devices to the Unit
- 10 Rear Panel Connections
- 12 General System Setup
- 12 USB Mouse Operation
- 13 Functional Icons
- 14 Enter OSD Setup Menu
- 15 User Management
- 16 Power On / Shutdown / Reboot
- 18 HDD Auto Scan
- 19 System Date / Time Setting
- 19 Set Date / Time
- 20 Daylight Saving Time
- 20 Network Time Protocol Setup
- 21 Record Schedule / Quality Setting
- 22 Record Mode Setup
- 23 Schedule Setup
- 23 Preset Record Configuration
- 24 ezRecord Setup
- 25 Advance Schedule Setup
- 25 Schedule Table
- 26 Recording Profile Setup
- 26 Holiday Setup
- 27 Data Lifetime Setup
- 28 Circular Recording
- 28 Audio Recording
- 28 Purge Data
- 29 Event Setting
- 29 Internal Buzzer
- 29 Event Icon
- 30 Alert Notification Setup
- 30 Alert Configuration Set
- 30 Alert Notification
- 30 Alert IP
- 30 Alert Port
- 30 Alert Interval
- 31 Event Full Screen
- 31 Event Duration
- 31 Per Channel Config
- 31 Channel Select
- 31 Video Loss Detect
- 32 Motion Detect
- 32 Detection Configuration
- 33 Alarm In
- 33 Alarm Out
- 33 Copy Event Settings
- 34 E-mail Management
- 35 Basic Operation
- 35 View Live / Playback Video
- 35 Viewing Modes
- 35 Digital Zoom
- 36 Camera Info
- 36 View Live Cameras
- 36 Playback Recorded Videos
- 39 Capture Snapshots
- 39 Sequence
- 39 Sequence with Main Monitor
- 39 Sequence with Call Monitor
- 40 Search Recorded Video
- 40 Search by Time
- 41 Calendar Search
- 42 Search by Event
- 43 Video Export
- 43 OSD Export Menu
- 44 Select the External Device
- 44 Select Video for Exporting
- 45 Digital Signature
- 46 Begin Export
- 46 Quick Video Export
- 46 ezBurn Introduction
- 47 Export Normal Video
- 48 Export Event Video
- 48 Dome Control
- 48 Dome Connection
- 49 Dome Protocol Setup
- 49 RS485 Setup
- 50 Dome Control Buttons
- 51 Set Preset Points
- 51 Call Preset Points
- 52 Run Dome Camera Tour
- 52 System Log Exportation
- 53 Remote Monitoring Software
- 53 Remote Monitoring System Requirements
- 54 Software Installation
- 54 Change Internet Settings
- 56 Install the Remote Monitoring Software
- 57 Login / Logout
- 58 Software Upgrades
- 58 Basic Operation
- 58 View Live Video
- 59 Select Display Mode
- 59 Operate Cameras with Dome Control
- 60 Digital Zoom of Camera Display
- 61 Instant Recording
- 61 Record Video Instantly
- 61 Playback Instant Recorded Video
- 61 Playback Video
- 62 Playback Remote Video
- 63 Playback Local *.drv Files
- 63 Playback Controls
- 64 Verify Digital Signature
- 64 Search from Event List
- 65 Take a Snapshot
- 65 Health Status
- 66 Normal and Dual Streaming
- 66 Upgrade Remote Software / Reboot of Connected DVR
- 67 Remote Monitoring Software Troubleshooting
- 69 Appendix A: Keyboard Access Sketch
- 70 Appendix B: Remote Controller
- 72 Appendix: Setup a DVR Behind a Router