advertisement
Saving the Camera
Position and Action
Preset position Menu
—
When you click
Preset position
in the Administrator menu, the Preset position menu appears. This allows you to save the camera’s pan, tilt and zoom positions and set position/shadow tours (programmed action of the camera).
The Preset position menu consists of 3 tabs: Position,
Tour (position) and Tour (shadow).
The Preview screen is displayed.
Position Tab — Saving pan/tilt/ zoom position
You can set up to 256 camera positions (pan, tilt and zoom positions).
Preview screen
This screen is for monitoring images and setting preset positions.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 24).
Home position setting
Set the current camera position as the home position.
Set
Click to save the current pan, tilt and zoom positions as the home position. To move the camera to the home position, click
in the control panel (page 22).
Reset
Click to reset the home position to the factory-set position.
Position at alarm
The camera can synchronize a preset position with
Sensor input or with the detection functions.
If an alarm is detected by the sensor input or the detection functions, the camera automatically moves to the corresponding preset position.
If you do not want to synchronize with any preset number, select none.
Sensor input 1 (S1)
Select a preset position to synchronize with the alarm from Sensor input 1.
Sensor input 2 (S2)
Select a preset position to synchronize with the alarm from Sensor input 2.
Sensor input 3 (S3)
Select a preset position to synchronize with the alarm from Sensor input 3.
Sensor input 4 (S4)
Select a preset position to synchronize with the alarm from Sensor input 4.
Camera tampering detection (TP)
Select the preset position to synchronize with the camera tampering detect alarm.
VMF (VM)
Select the preset position to synchronize with the VMF detection alarm.
Motion Detection (MD)
Select a preset position to synchronize with the alarm from the motion detection.
Click Detection, and the motion detection menu is displayed to allow you to set the motion detection
Audio detection (AD)
Select the preset position linked with alarm by audio detection function.
Click Detection, and the audio detection menu is displayed to allow you to set the audio detection
72
Saving the Camera Position and Action — Preset position Menu
advertisement
Related manuals
advertisement
Table of contents
- 4 Features
- 5 How to Use This User’s Guide
- 5 System Requirements
- 6 Assigning the IP Address to the Camera
- 6 Assigning an IP address using SNC toolbox
- 8 later
- 10 When using Windows Vista
- 13 When using Windows
- 15 Browser
- 18 Basic Configuration by the Administrator
- 19 Administrator and User
- 20 Logging in to System
- 20 Logging in as a user
- 20 About Viewers
- 21 Configuration of Main Viewer
- 21 Main menu
- 21 Control panel section
- 24 Monitor image
- 24 Plug-in free viewer
- 25 Operating the Camera
- 25 dragging mode)
- 26 (Area zoom mode only)
- 26 area (Area zoom mode only)
- 26 dragging mode only)
- 27 modes)
- 27 control bar (PTZ Control bar only)
- 27 Image
- 27 Facing the camera toward a specified point
- 28 Using the Trigger Button
- 28 Sending a monitor image via e-mail
- 28 Sending a monitor image to an FTP server
- 28 Recording a camera image as a still image
- 29 Controlling alarm output
- 29 Controlling the Day/Night function
- 29 Playing an audio file stored in the camera
- 29 Switching TCP/UDP Transmission Mode
- 30 Using the System Utility
- 30 SNC viewer
- 32 SNC desktop viewer
- 34 How to set up the Administrator menu
- 35 Configuration of the Administrator menu
- 36 Configuring the System — System Menu
- 36 System Tab
- 37 Date & time Tab
- 38 Superimpose Tab
- 39 Installation Tab
- 40 Initialize Tab
- 42 System log Tab
- 42 Access log Tab
- 43 — Camera Menu
- 43 Common Tab
- 44 Picture Tab
- 46 Privacy Masking tab
- 47 Day/Night Tab
- 48 Video codec Tab
- 50 Streaming Tab
- 51 Configuring the Network — Network Menu
- 51 Network Tab
- 53 connection
- 56 QoS Tab
- 57 — Notifying the IP Address
- 59 Setting the SSL function — SSL Menu
- 59 SSL tab
- 61 client authentication
- 62 How to install the CA certificate
- 63 To remove an installed CA certificate
- 64 — 802.1X Menu
- 64 System configuration of 802.1X network
- 65 authentication function
- 66 Client certificate Tab
- 67 CA certificate Tab
- 67 – Example of Windows Server
- 70 Setting the User — User Menu
- 71 Setting the Security — Security Menu
- 72 — Preset position Menu
- 72 position
- 73 Position Tour Tab — Setting a position tour
- 74 Shadow Tour Tab - Setting a shadow tour
- 75 Function
- 77 mode when detecting the alarm
- 78 e-mail sending mode
- 79 function
- 79 action when detecting the alarm
- 80 FTP client activity
- 82 function
- 83 alarm
- 84 recording mode
- 85 Folder structure of image memory
- 86 — FTP server Menu
- 88 Folder structure of Edge Storage
- 88 Alarm output 1, 2 Tab
- 90 — Voice alert Menu
- 90 Voice alert 1, 2, 3 Tab
- 91 — Trigger Menu
- 93 Setting the Schedule — Schedule Menu
- 94 — Event detection menu
- 94 Sensor input tab — Set the sensor input
- 94 tampering detection
- 94 detection
- 94 What are VMF functions
- 95 Setting items for motion detection
- 98 VMF setting items
- 101 detection
- 102 — PTZ control I/F Menu
- 103 Configuring the Viewer — Viewer Menu
- 103 Layout tab
- 106 HTML output tab
- 107 Using the SNC toolbox
- 107 Starting SNC toolbox
- 107 How to use SNC toolbox
- 109 Registering in My device
- 110 Changing the Device list display method
- 111 Setting SNC toolbox options
- 112 Image
- 114 — Creating a Panorama Image
- 115 — Setting the customized homepage
- 115 Using the Firmware Upgrade
- 116 Using the Schedule Task
- 118 Configuring the device setting
- 120 Device restart and initialization
- 121 Audio to Camera
- 121 Installing the SNC audio upload tool
- 122 Connecting the Camera to the Computer
- 122 Using the SNC audio upload tool
- 127 Audio File Recorded with the Camera
- 127 Installing the SNC video player
- 127 Using the SNC video player
- 128 Using the SNMP
- 128 1. Inquiry Commands
- 129 2. Setting Commands
- 130 Glossary
- 133 Index