advertisement
Alarm sending Tab — Setting the e-mail sending mode when detecting the alarm
Set to send an e-mail linked with alarm detection by the external sensor input or by the built-in detection functions.
Alarm sending
Select On to set sending an e-mail linked with alarm detection.
File attachment
Set whether an image file (JPEG file) is to be attached to the e-mail or not.
When On is selected, the image file made using the settings below is attached. When Off is selected, only the message is sent.
Image file name
Type the file name you want to assign to the image to be attached to an e-mail. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming.
Suffix
Select a suffix to be added to the file name.
None: No suffix is added. The image file name is assigned to the image to be sent via e-mail.
Date & time: The date & time suffix is added to the image file name.
The date/time suffix consists of lower two-digits of the year (2 digits), month (2 digits), date (2 digits), hour (2 digits), minute (2 digits), second (2 digits), and sequential number (2 digits), thus adding 14digit number to the image file name.
Sequence number: A sequential number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 are added to the image file name.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the alarm to be linked with e-mail notification.
Sensor input 1: The external sensor that is connected to sensor input1 of the camera I/O port.
Sensor input 2: The external sensor that is connected to sensor input 2 of the camera I/O port.
Sensor input 3: The external sensor that is connected to sensor input 3 of the camera I/O port.
Sensor input 4: The external sensor that is connected to sensor input 4 of the camera I/O port.
Tampering: An alarm that is triggered when the camera detects tampering, such as direction shift or spraying.
VMF: An alarm of the VMF detection function.
Motion detection: The alarm detected by the motion detection function.
Click Detection, and the motion detection menu is displayed to allow you to set the motion detection
Audio detection: Select the preset position linked with alarm by audio detection function.
Click Detection, and the audio detection menu is displayed to allow you to set the audio detection
Note
In the case that the synchronized preset position is specified in Position at alarm in the Preset position menu, an alarm event that happens when the camera moves to the preset position will be invalid.
Effective period
Set the period during which alarm detection is effective.
Always: Alarm detection is always effective.
Schedule: You can specify the period during which alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
OK/Cancel
See “Buttons common to every menu” on page 34.
Sending an Image via E-mail — e-Mail (SMTP) Menu
77
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Features
- 5 How to Use This User’s Guide
- 5 System Requirements
- 6 Assigning the IP Address to the Camera
- 6 Assigning an IP address using SNC toolbox
- 8 later
- 10 When using Windows Vista
- 13 When using Windows
- 15 Browser
- 18 Basic Configuration by the Administrator
- 19 Administrator and User
- 20 Logging in to System
- 20 Logging in as a user
- 20 About Viewers
- 21 Configuration of Main Viewer
- 21 Main menu
- 21 Control panel section
- 24 Monitor image
- 24 Plug-in free viewer
- 25 Operating the Camera
- 25 dragging mode)
- 26 (Area zoom mode only)
- 26 area (Area zoom mode only)
- 26 dragging mode only)
- 27 modes)
- 27 control bar (PTZ Control bar only)
- 27 Image
- 27 Facing the camera toward a specified point
- 28 Using the Trigger Button
- 28 Sending a monitor image via e-mail
- 28 Sending a monitor image to an FTP server
- 28 Recording a camera image as a still image
- 29 Controlling alarm output
- 29 Controlling the Day/Night function
- 29 Playing an audio file stored in the camera
- 29 Switching TCP/UDP Transmission Mode
- 30 Using the System Utility
- 30 SNC viewer
- 32 SNC desktop viewer
- 34 How to set up the Administrator menu
- 35 Configuration of the Administrator menu
- 36 Configuring the System — System Menu
- 36 System Tab
- 37 Date & time Tab
- 38 Superimpose Tab
- 39 Installation Tab
- 40 Initialize Tab
- 42 System log Tab
- 42 Access log Tab
- 43 — Camera Menu
- 43 Common Tab
- 44 Picture Tab
- 46 Privacy Masking tab
- 47 Day/Night Tab
- 48 Video codec Tab
- 50 Streaming Tab
- 51 Configuring the Network — Network Menu
- 51 Network Tab
- 53 connection
- 56 QoS Tab
- 57 — Notifying the IP Address
- 59 Setting the SSL function — SSL Menu
- 59 SSL tab
- 61 client authentication
- 62 How to install the CA certificate
- 63 To remove an installed CA certificate
- 64 — 802.1X Menu
- 64 System configuration of 802.1X network
- 65 authentication function
- 66 Client certificate Tab
- 67 CA certificate Tab
- 67 – Example of Windows Server
- 70 Setting the User — User Menu
- 71 Setting the Security — Security Menu
- 72 — Preset position Menu
- 72 position
- 73 Position Tour Tab — Setting a position tour
- 74 Shadow Tour Tab - Setting a shadow tour
- 75 Function
- 77 mode when detecting the alarm
- 78 e-mail sending mode
- 79 function
- 79 action when detecting the alarm
- 80 FTP client activity
- 82 function
- 83 alarm
- 84 recording mode
- 85 Folder structure of image memory
- 86 — FTP server Menu
- 88 Folder structure of Edge Storage
- 88 Alarm output 1, 2 Tab
- 90 — Voice alert Menu
- 90 Voice alert 1, 2, 3 Tab
- 91 — Trigger Menu
- 93 Setting the Schedule — Schedule Menu
- 94 — Event detection menu
- 94 Sensor input tab — Set the sensor input
- 94 tampering detection
- 94 detection
- 94 What are VMF functions
- 95 Setting items for motion detection
- 98 VMF setting items
- 101 detection
- 102 — PTZ control I/F Menu
- 103 Configuring the Viewer — Viewer Menu
- 103 Layout tab
- 106 HTML output tab
- 107 Using the SNC toolbox
- 107 Starting SNC toolbox
- 107 How to use SNC toolbox
- 109 Registering in My device
- 110 Changing the Device list display method
- 111 Setting SNC toolbox options
- 112 Image
- 114 — Creating a Panorama Image
- 115 — Setting the customized homepage
- 115 Using the Firmware Upgrade
- 116 Using the Schedule Task
- 118 Configuring the device setting
- 120 Device restart and initialization
- 121 Audio to Camera
- 121 Installing the SNC audio upload tool
- 122 Connecting the Camera to the Computer
- 122 Using the SNC audio upload tool
- 127 Audio File Recorded with the Camera
- 127 Installing the SNC video player
- 127 Using the SNC video player
- 128 Using the SNMP
- 128 1. Inquiry Commands
- 129 2. Setting Commands
- 130 Glossary
- 133 Index