advertisement
All MOBATime network devices are displayed in the so-called device view. Here, the devices can be grouped according to user-defined criteria. For this, the individual devices can simply be moved to the according groups and sorted using drag and drop.
There is no limit to the number of groups and sub-groups.
Besides the organizational advantages (easier locating, better overview), a device group has the following advantages:
commands and device updates can be applied to the whole group (including sub-groups).
Alarms and errors of included devices are displayed on the group level.
Complete groups can be moved / sorted among themselves.
The content of the device view can be saved and opened at a later time. The created structure and breakdown into groups is preserved.
© MOBATIME 12 / 108 801053.02
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- - Safety
- - Maintenance
- - General Information: Introduction
- - Displays
- - Installation
- - Operation
- - Updates
- - Time administration
- 4 Power supply alternatives
- 5 Connection diagrams
- 9 Time zone table
- 12 Alarm list
- 14 Troubleshooting
- 16 Serial Telegrams
- 21 Copyright Notice
- 22 Parameters
- 27 Technical data
- 30 Index
- 32 Connection table (to fill in)
- 6 Safety
- 6 Safety instructions
- 6 Instruction Manual
- 6 Intended Use
- 7 Observe operating safety!
- 7 Consider the installation site!
- 7 compatibility!
- 8 Maintenance
- 8 Troubleshooting: Repairs
- 8 Cleaning
- 8 Disposing
- 9 General Information: Introduction
- 9 Scope of Delivery
- 9 Technical Data
- 9 Device Description in this Manual
- 9 Introduction
- 10 Device types
- 10 DTS Distributed Time System
- 10 MOBA-NMS - Network Management System
- 11 Overview of the main functions
- 12 Device management
- 13 Displays
- 13 LED displays front side
- 13 LED indication back side
- 14 Display
- 15 Installation
- 15 Connections
- 15 Initial configuration
- 15 Firmware
- 15 Basic settings (factory settings)
- 16 Operation
- 16 General
- 16 Telnet
- 17 Menu structure
- 18 MOBA-NMS operation
- 19 Main menu
- 20 Status menu
- 22 Time information and status
- 23 Time source information
- 24 Configuration menu
- 25 Lines
- 25 DCF – output
- 26 DCF / Pulse / Frequency output
- 27 Serial interface
- 29 IRIG / AFNOR / DCF-FSK Output
- 30 NTP slave clocks / time zone server
- 32 SINEC
- 32 Time handling
- 33 Time source
- 34 Time adjustment / Time-keeping
- 35 Redundant operation
- 36 NTP server
- 40 Manual time set / Leap second
- 41 PTP Server
- 43 Alarms
- 43 Alarm relay
- 44 Alarm mask
- 45 E-mail
- 47 SNMP traps
- 49 Alarm input
- 50 General settings
- 51 Network
- 53 Services (network services FTP, telnet, SSH...)
- 55 SNMP V1 / V2c
- 56 SNMP V
- 59 Time zone selection
- 60 Maintenance menu
- 61 Updates
- 61 Updating images with MOBA-NMS
- 61 Updating images with FTP
- 62 Updating images via USB
- 64 FTP connection
- 64 SFTP connection
- 65 SCP connection
- 65 Save Configuration externally
- 66 4148.grandmaster
- 67 Time administration
- 67 Concept of time administration
- 68 Time acceptance
- 68 (DCF or GPS)
- 69 IRIG-B12x source
- 69 Time acceptance from NTP
- 69 NTP as backup
- 69 Time server
- 70 Time accuracy, time-keeping
- 70 Leap second
- 70 NTP Authentication
- 70 NTP symmetric keys
- 71 NTP Autokey
- 73 4148.grandmasters
- 75 General
- 76 Device configuration with SNMP
- 76 DTS subagent SNMP notification
- 76 Startup [dts4148StartUp]
- 76 Shutdown [dts4148Shutdown]
- 77 Status changed [dts4148StatusChanged]
- 77 [dts4148ConfigChanged]
- 78 Alive Notification [dts4148Alive]
- 78 Alarm Notification [dts4148Alarm]
- 79 Power supply alternatives