Beverage pre-selection. WMF 9000 S Plus

Software | Operating options

DS_Getraenkevorwahl

Beverage pre‑selection

Options:

Default value:

• active inactive

• inactive active Previously selected beverages are dispensed without an additional button touch.

The header line displays, “Beverage pre-selection active”.

Cancel beverage

Options:

Default value:

• active inactive

• inactive active Beverage dispensing can be interrupted by touching the beverage button again.

Hot water temperature pre‑selection

Three hot water temperatures between 70 and 95 °C can be set.

Options: • active

• inactive

Default value: inactive active Touching the hot water button brings up a selection of three dispensing temperatures in two sizes.

inactive No temperature selection is possible.

The hot water temperature is preset.

Beverage pre-selection

46

User Manual WMF 9000 S +