Milk foam selection. WMF 9000 S Plus

Software | Operating options

Milk foam selection

Options:

Default value:

• active active

• inactive

Logo

Manufacturer's logo

Options:

Default value:

• active active

• inactive active The manufacturer's logo is shown at the top left of the ready-to-operate display.

Customer logo

Options:

Default value:

• active inactive

• inactive active When the option is set to “active” and a customer logo has been downloaded, the customer logo is shown at the center of the header line when ready to operate. When vending devices are connected, it shows the customer logo. In this case, both logos cannot be displayed.

Load customer logo

Insert the USB stick containing the customer logo.

Load the customer logo.

Size of customer logo

The logo must not be greater than 80 pixels high.

Larger logos will be scaled to this size automatically.

Milk foam selection is possible only with Auto Steam option.

User Manual WMF 9000 S +

47