ICX Section 700 Feature Operation Ver 5

Chapter 5. Key Telephone Features Section 700 - Operation

Action

4. Enter the Walking TRS (Call Barring)/Station Lockout security code.

5. Replace the handset or press the ON/OFF key.

Result

Cleared St. Lock displays

The telephone display returns to the normal display.

To change the Walking TRS (Call Barring)/Station Lockout security code:

Action

1. Lift the handset or press the ON/OFF key.

2. Enter the Walking TRS (Call Barring)/Station Lockout

Security Code Change code (default = 749 [UK/HK] or

749# [Taiwan, Malaysia, Indonesia]).

3. Enter the current Walking TRS (Call Barring)/Station Lockout security code.

4. Enter the new Walking TRS (Call Barring)/Station Lockout security code.

5. Replace the handset or press the ON/OFF key.

Result

Intercom dial tone

Enter Old ID displays

Enter New ID displays

Stored ID Code displays

The telephone display returns to the normal display.

Hardware Requirements

• N/A

Considerations

• Walking TRS (Call Barring) and Station Lockout use the same security code.

• You cannot override station lockout using Walking TRS (Call Barring) feature.

• If you enter an incorrect key code and then try to dial, the phone will issue a busy tone.

• If station lockout is set, the phone is limited to the Station Lockout TRS (Call Barring) Class outside calling abilities. This TRS (Call Barring) Class should be carefully selected to only allow the desired call types.

• Without Walking TRS (Call Barring) /Station Lockout Security Code, you cannot set the Station

Lockout feature.

Step Call (Reset Call)

Description

If you dial a busy extension, the system allows you to quickly dial another extension by simply pressing the last digit of the new extension number.

204 ICX (International) issued October 2000 ICX-50-700