ICX Section 700 Feature Operation Ver 5

Chapter 7. SLT Features Section 700 - Operation

Hardware Requirements

• N/A

Related Programming

• FF1-0-03: Extension COS (Hookflash Control on SLTs)

Considerations

• Intercom calls will be held as Exclusive.

Broker’s Hold

Broker’s Hold allows you to toggle between the current call and the last held call by hookflash.

Operation

To place a call on Broker’s Hold:

1. Pick up the first call.

2. Hookflash.

3. Pick up the second call.

4. Hookflash.

Action

First call on hold

Result

Second call on hold, first call retrieved

Hardware Requirements

• N/A

Related Programming

• F1-0-03: Extension COS (Hookflash Control on SLTs - Broker’s Hold or Conference)

• FF3: Extension COS

Considerations

• If Broker’s Hold is enabled, it is not possible to establish a conference call from an SLT position.

Call Park

You can use the Call Park function to transfer a call, even if you cannot locate the intended recipient of the call.

Trunk, extension, and network calls may be parked.

There are two ways for an extension to park a call on the ICX. One way is to park the call at the receiving extension and to retrieve the parked call at another extension by dialling the park answer code plus the parking extension number. The other way is to park the call at another extension and dial the park transfer answer code at the other extension to retrieve the call. In Version 5.0, an Extension

Group Pickup code allows the user to pick up a Transfer Recall (only on non-appearing calls), a Hold

Recall, and a Station Park Recall.

284 ICX (International) issued June 2000 ICX-50-700