Setting the timer. Sharp SD-HX500, SDHX500

SD-HX500

ENGLISH

Setting the timer (continued)

1

Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.

2

Within 10 seconds, press the or button to select "TIMER

ONCE" or "TIMER DAILY", and press the ENTER button.

Once timer Daily timer

7

Switch the input with the or button, and then press the ENTER button.

" Available playback sources: DVD/CD, TUNER, TV, VCR, AUX 1 and AUX 2.

" If you select TV, VCR, AUX 1 or AUX 2, connect the unit to the corresponding equipment and set the timer.

" When you select "TUNER", select a station by pressing the or button, and then press the ENTER button.

" If a station has not been programmed, "NO P.SET" will be displayed and timer setting will be canceled.

3

Within 10 seconds, press the or button to select "ONCE SET" or "DAILY SET", and press the ENTER button.

Once timer Daily timer

4

Press the or button to adjust the hour and then press the EN-

TER button.

5

Press the or button to adjust the minutes and then press the

ENTER button.

6

Set the time to finish as in steps

4 and 5 above.

Preset channel number

8

Adjust the volume with the or

button and press the ENTER button.

Do not set the volume too high.

9

Press the ON/STAND-BY button to enter the power stand-by mode.

" The unit enters the timer stand-by mode.

(The timer set indicator lights up. See page 52.)

" The timer setting is retained.

E-51

04/2/4 SD_HX500_SEC_SECL_E5.fm

TINSKA015AWZZ