advertisement
Operations after setting the timer
1
After setting the timer
Lights up
" The unit is in the timer stand-by mode.
"
If the timer set indicator does not light up, turn on the power and set the timer again.
2
At the start time or flashes
!
In the timer stand-by mode
Checking the timer setting:
1 Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE" or "TIMER
DAILY", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE CALL" or "DAILY
CALL", and press the ENTER button.
The unit returns to the timer stand-by mode after displaying the settings in order.
Canceling the timer setting:
1 Set the MODE 1/MODE 2 switch to MODE 2 and press the TIMER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE" or "TIMER
DAILY", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE OFF" or "DAILY OFF", and press the ENTER button.
Timer will be canceled (the setting will be retained).
!
To use the same timer setting
Once timer:
1 Turn on the power, set the MODE 1/MODE 2 switch to MODE 2 and press the TIM-
ER/SLEEP button.
2 Within 10 seconds, press the or button to select "TIMER ONCE", and press the ENTER button.
3 Within 10 seconds, press the or button to select "ONCE ON", and press the
ENTER button.
4 Press the ON/STAND-BY button to enter the power stand-by mode.
Daily timer:
The timer will operate at the same time every day. It will continue until the daily timer setting is canceled. Cancel the daily timer when it is not in use.
When you use the same setting for the daily timer, select "TIMER DAILY" instead of
"TIMER ONCE", and select "DAILY ON" instead of "ONCE ON".
SD-HX500
ENGLISH
The volume will increase gradually until it reaches the preset volume.
3
When the finish time is reached:
The unit is set to the power stand-by mode automatically.
N
P
I
V
E
E
F
S
04/2/4 SD_HX500_SEC_SECL_E5.fm
E-52
TINSKA015AWZZ
advertisement
Related manuals
advertisement