Storing volume, surround or amplifier settings. Sharp SD-HX500, SDHX500

Storing volume, surround or amplifier settings

You can recall volume, surround or amplifier settings you stored (up to 4 settings) with a simple operation.

Settings are stored in sound pattern buttons by default.

3

Within 5 seconds, press a SOUND PATTERN

(A/B/C/D) button.

To store in other buttons, repeat from step 1.

Example: When you press the SOUND

PATTERN A button.

SD-HX500

ENGLISH

Notes:

" You cannot store or recall sound patterns while playing a DVD-Audio/SACD disc or listening to the radio.

" Even if you store a pattern with "STADIUM" or "HALL", 5.1 channel/mono sound plays in "STANDARD".

Recalling stored settings:

Set the MODE 1/MODE 2 switch to MODE 2 and press a SOUND PATTERN (A/B/C/D) button containing settings.

Stored settings apply to volume, surround and amplifier.

Example: When you press the SOUND PAT-

TERN A button.

!

Change the settings

1

Adjust volume, surround and the amplifier

Refer to page 18 (volume control), pages 40 - 41 (surround) and pages 46 - 49

(amplifier).

2

After setting, set the MODE 1/MODE 2 switch to MODE 2 and press the SOUND MEMORY button.

If 5.1 channel sources (Dolby Digital or DTS) are played in "STADIUM" or "HALL", you cannot recall sound patterns.

Default settings:

SOUND PATTERN button

Volume:

Sound mode (*):

Amplifier settings:

Speaker size:

Front speakers

Center speaker

Surround speakers

Subwoofer

Speaker delay:

Speaker level:

Crossover frequency:

20 dB

MOVIE1

20 dB

MOVIE2

20 dB

MUSIC1

20 dB

MUSIC2

F-LARGE F-LARGE F-LARGE F-LARGE

C-LARGE C-LARGE C-LARGE C-LARGE

S-LARGE S-LARGE S-LARGE S-LARGE

SW-YES

6ft (2 m)

0 dB

100 Hz

SW-YES SW-YES SW-YES

6ft (2 m)

0 dB

120 Hz

6ft (2 m)

0 dB

100 Hz

6ft (2 m)

0 dB

120 Hz

(*) indicates the supported surround sound.

04/2/4 SD_HX500_SEC_SECL_E5.fm

E-56

TINSKA015AWZZ

N

P

I

V

E

E

F

S

SD-HX500

ENGLISH

Mounting the unit on the wall

!

Attaching the wall bracket

1

Remove the stand.

Main unit

2

Route all connection cables through the wall bracket.

3

Attach the wall bracket.

Main unit

Wall bracket

Amplifier unit

Place the main unit and amplifier unit on a cushion or a soft cloth to avoid damage.

Amplifier unit

Screw

Wall bracket

Screw

" Fix them securely with the screw removed in step 1.

" Do not use other screws. The unit may fall or break.

E-57

04/2/4 SD_HX500_SEC_SECL_E6.fm

TINSKA015AWZZ