BASIC OPERATIONS. JVC KD-SX924R, KD-SX925R, kd sx 925 r, KD-SX909R, kd sx 909 r, kd-sx979r

BASIC OPERATIONS

1

1

3

Note:

When you use this unit for the first time, set the built-in clock correctly, see page 26.

2

Turn on the power.

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on.

You do not have to press this button to turn on the power.

2

CD -CH FM/AM CD

Select the source.

To operate the tuner, see pages 6 – 17.

To operate the CD player, see pages 18 – 21.

To operate the CD changer, see pages 37 – 39.

To operate the external component, see page 40.

To operate the DAB tuner, see pages 41– 46.

3

Adjust the volume.

Volume level appears.

Volume level indicator

4

Adjust the sound as you want (see pages 22 – 25).

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

To turn off the power

Press for more than 1 second.

CAUTION on Volume Setting

CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume before playing a disc and adjust it as required during playback.

5

EN02-05.KD-SX979R[E]/f 5 00.1.20, 1:26 PM