EXTERNAL COMPONENT OPERATIONS. JVC KD-SX924R, KD-SX925R, kd sx 925 r, KD-SX909R, kd sx 909 r, kd-sx979r

EXTERNAL COMPONENT OPERATIONS

You can connect the external component to the CD changer jack on the rear using the Line

Input Adaptor KS-U57 (not supplied).

3 1

Preparations:

• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/

Connection Manual (separate volume).

• Before operating the external component using the following procedure, select the external input correctly. (See “Selecting the external component to use” on page 33.)

1

Select the external component.

CD

-CH

• If “LINE IN”* does not appear on the display, see page 33 and select the external input (“LINE IN”).

* Displayed only when one of the following sources is selected

— FM, AM and CD.

Note on One-Touch Operation:

When you press CD-CH, the power automatically comes on. You do not have to press

to turn on the power.

2

Turn on the connected component and start playing the source.

3

Adjust the volume.

40

EN40-40.KD-SX979R[E]/f 40 00.1.20, 2:08 PM