Using Standby Reception. JVC KD-SX924R, KD-SX925R, kd sx 925 r, KD-SX909R, kd sx 909 r, kd-sx979r

Using Standby Reception

Standby Reception allows the unit to switch temporarily to your favorite programme (PTY:

Programme Type) and Traffic Announcement (TA) from the current source (another FM station,

CD and other connected components).

Note:

Standby Reception will not work if you are listening to an AM station.

TA Standby Reception

TP

RDS • When you press TP RDS while listening to an FM station, the TP indicator is lit during reception of a TP (Traffic Programme) station and the TA standby mode is engaged.

Note:

When the station being received is not a TP station, the TP indicator flashes. Press

¢ or 4 to engage the TA standby mode. “SEARCH” appears on the display, and TP station search starts. When a TP station is tuned in, the TP indicator is lit.

• If you are listening to a CD and wish to listen to a TP station, press

TP RDS to enter the TA standby mode. (The TP indicator lights up.)

If a traffic programme starts broadcasting while the TA standby mode is active,

“TRAFFIC” appears and the playback source changes to the FM band. The volume increases to the preset TA volume level and the traffic programme can be heard (see page 17).

To deactivate the TA standby mode, press TP RDS again.

PTY Standby Reception

PTY

• When you press PTY while listening to an FM station, the PTY indicator is lit during reception of a PTY station and the PTY standby mode is engaged.

The selected PTY name stored on page 14 flashes for 5 seconds.

Note:

When the station being received is not a PTY station, the PTY indicator flashes.

Press

¢ or 4 to engage the PTY standby mode. “SEARCH” appears on the display, and PTY station search starts. When a PTY station is tuned in, the PTY indicator is lit.

• If you are listening to a CD and wish to listen to a selected PTY broadcast, press PTY to enter the PTY standby mode. (The PTY indicator lights up.)

If the selected PTY programme starts broadcasting while the PTY standby mode is active, the selected PTY name appears and the playback source changes to the FM band. The selected PTY programme can then be heard.

To deactivate the PTY standby mode, press PTY again.

12

EN10-17.KD-SX979R[E]/f 12 00.1.20, 2:00 PM