CD OPERATIONS. JVC KD-SX924R, KD-SX925R, kd sx 925 r, KD-SX909R, kd sx 909 r, kd-sx979r

CD OPERATIONS

Playing a CD

1

1

2

Open the control panel.

1. Insert a disc into the loading slot.

The unit turns on, draws a CD and starts playback automatically.

2. Close the control panel by hand.

Total playing time of the inserted disc

Total track number of the inserted disc

Elapsed playing time Current track

Lights up

Notes:

• When a CD is inserted upside down, “PLEASE” and “EJECT” appear on the display alternately.

When you open the control panel by pressing

0, the CD automatically ejects.

• When you play a CD Text, the disc title and performer appear on the display. Then the current track and elapsed playing time appears on the display. See also “Playing a CD Text” (page 21) and

“Selecting the scroll mode” (page 33).

If a CD Text includes much text information, some may not appear on the display.

Note on One-Touch Operation:

When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically.

To stop play and eject the CD

Press 0 .

CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.

If you change the source to FM, AM, CD changer or external component, the CD play also stops (without ejecting the CD this time).

18

Notes:

• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust. (CD play will not start this time.)

• You can eject the CD even when the unit is turned off.

EN18-21.KD-SX979R[E]/f 18 00.1.20, 2:01 PM