ZTE EuFi891 User manual

EuFi891

Let’s go

Getting started with your device.

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

LEGAL INFORMATION

Copyright © 2013 ZTE CORPORATION.

All rights reserved.

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifica tions without prior notice.

Version No. : R1.0

Edition Time : 2013.09

Manual No. : 079584506070

NOTE:

Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety.

In the case of such event, cool the device in a well-ventilated place before turning on for normal use.

Getting to Know Your Device

Appearance

The following figure is only for your reference. The actual product may be different.

1. OLED Screen

2. Up Button

3. Down Button

4. OK Button

5. Power Switch

6. Micro USB Port

7. Reset Button

8. (U)SIM Card Slot

Indicators

When the device is powered on, the following icons will appear on the OLED screen, with the corresponding indicators listed in the table below:

Icon Indication

Battery power indication.

Network signal strength.

CDMA 1X Network

2G Network

3G Network

4G LTE Network

Roaming network indication.

New message received.

Text messages are full. You need to delete some messages to free some space for new text mes sages.

Wi-Fi Status and number of the connected users.

Settings

Connection Scenario

Your device allows you to use your (U)SIM card to access the

Internet and supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference.

3. Insert the battery.

Installing Your Device

1. Open the back cover and remove it.

4. Close the back cover.

2. Insert the (U)SIM card.

IMPORTANT: Your device does not support Micro/Nano or any other non-standard SIM cards. To avoid device damage, please do not use them.

Connecting to Your Device

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search for the available wireless networks.

4. Input the password, and then click Connect .

NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring your PC”, and then the client will get an IP address like “192.168.1.101”.

3. Select the SSID of your device, and then click Connect .

NOTE: You may need to input the password for Wi-Fi connec tion. Please check the label on your device to get the default.

5. Wait a moment, and then the client will connect to your device successfully.

NOTE:

Please check the label on your device to get the default SSID.

Accessing the Internet

After the client connected to your device successfully, you can access the Internet in the Automatic or Manual mode. The default mode is Automatic .

Mode

Automatic

Operations

Your device will connect to the Internet automati cally, and your clients can surf on the Internet directly.

Manual

Log in the webGUI configuration page, and select WAN Settings > WAN Connection >

Manual , and then click Connect or Disconnect .

NOTE:

If you want to modify the detailed parameters of your de vice, please log in the webGUI configuration page by visiting http://192.168.1.1 or http://m.home. The default password is admin .

Configuring Your PC

Follow the following steps and figures for Windows XP to con figure the Internet Protocol for your Wi-Fi connection.

1. Right-click , and then select Properties .

2. Right-click , and then select Properties .

3. Select , and then click Properties .

4. Select and Obtain

DNS server address automatically , and then click OK to finish the configuration.

Warning and Notice

To the Owner

• Some electronic devices are susceptible to electromag netic interference sent by your device if inadequately shielded, such as the electronic system of vehicles.

Please consult the manufacturer of your device before using if necessary.

• Operating your device may interfere with medical devices like hearing aids and pacemakers. Please always keep them more than 20 centimeters away from such medical devices when they are turned on. Turn your device off if necessary. Consult a physician or the manufacturer of the medical device before using your device.

• Be aware of the usage limitation when using your device at places such as oil warehouses or chemical factories, where there are explosive gases or explosive products be ing processed. Turn off your device if required.

• The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in hospitals. Please observe and obey all warning signs and switch off your de vice in these conditions.

• Do not touch the inner antenna area if not necessary. Oth erwise it will affect your device’s performance.

• Store your device out of the reach of little children. Your device may cause injury if used as a toy.

• Do not touch the metallic parts of your device so as to avoid a burn, when your device is working.

Using Your Device

• Please use original accessories or accessories that are authorized. Using any unauthorized accessories may affect your device’s performance, and violate related na tional regulations about telecom terminals.

• Avoid using your device near or inside metallic structures or establishments that can emit electromagnetic waves.

Otherwise it may influence signal reception.

• Your device is not waterproof. Please keep it dry and store in a shady and cool place.

• Do not use your device immediately after a sudden tem perature change. In such case, it will produce dew inside and outside your device, so don’t use it until it becomes dry.

• Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged.

• No dismantling by non-professionals and only qualified technicians can undertake repair work.

• Operating temperature range of 0°C ~ +35°C and humidity range of 5% ~ 95% are recommended.

Using Battery

• Do not short-circuit the battery, as this can cause exces sive heat and fire.

• Do not store battery in hot areas or dispose of it in a fire to avoid explosion.

• Do not disassemble or modify the battery.

• When not using the battery for a long period, remove it from your device and store it in a cool dry place.

• Never use any charger or battery damaged or worn out.

• Return the wear-out battery to the provider or put it in the appointed recycle place. Do not put it in familial rubbish.

WARNING: If the battery is broken, keep away from it. If it taints your skin, wash your skin with abundant fresh water and ask doctor for help if necessary.

Limited Warranty

• This warranty does not apply to defects or errors in the

Product caused by: i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, opera tion or maintenance instructions or procedures.

iii. End User’s mishandling, misuse, negligence, or im proper installation, disassembly, storage, servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTEcertified individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party products provided that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the Product.

End User shall have no right to reject or return the Product, or receive a refund for the Product from ZTE under the abovementioned situations.

• This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming items, and is in lieu of all other warranties, expressed, implied or statu tory, including but not limited to the implied warranties of merchantability and fitness for a particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of or in connection with using of this product, whether or not ZTE had been advised, knew or should have known of the possibility of such damages, including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute facilities or product, or any downtime cost.

Troubleshooting

Problem

Cannot establish the

Wi-Fi connection between your device and client.

•

•

•

•

Suggested Solution

Make sure the Wi-Fi function is active.

Refresh network list and select the cor rect SSID.

Check the IP address to make sure your client can obtain an IP address automatically in the Internet protocol (TCP/IP) properties.

Type the correct network key (Wi-Fi password) when you connect to the de vice.

Problem

The client connected to the device cannot access the Internet.

•

•

•

•

Suggested Solution

Make sure your (U)SIM card is available.

Change the location to find a place with good signal.

Check WAN Connection mode setting.

Contact your service provider and confirm your APN settings.

When I use

Internet Wi-

Fi mode, the client cannot access the Internet.

•

•

Make sure the other WLAN device has already connected to the Internet.

Make sure that the subnet of your device and the other WLAN device is different

Cannot visit the webGUI configuration page.

•

•

•

Enter the correct address. The default address is http://192.168.1.1 or http:// m.home.

Only use one network adapter in your

PC.

Do not use any proxy server.

Problem

About the password

•

•

•

•

Suggested Solution

For the Wi-Fi connection password, please check the label on the device.

Power on your device and then the SSID and Wi-Fi connection password appear on the screen.

The default password of the webGUI configuration page is admin .

If you changed the password and forgot the new password, you need to restore the device to the factory default settings.

For more assistance, please:

• Send E-mail to [email protected]

• Visit www.ztedevice.com

• Call Service Hotline: +86–755–26779999