STMicroelectronics STD3NK60Z-1 Datasheet
Reklāma
Reklāma
STB3NK60ZT4, STD3NK60Z-1, STD3NK60ZT4
STP3NK60Z, STP3NK60ZFP
Datasheet
N-channel 600 V, 3.2 Ω typ., 2.4 A SuperMESH™ Power MOSFETs in
D²PAK, IPAK, DPAK, TO-220 and TO-220FP packages
TAB
TAB
1
D 2 PAK
3
TO-220
1
2
3
TAB
1
2 3
DPAK
TAB
D(2, TAB)
IPAK
1
2
3
TO-220FP
1
2
3
G(1)
S(3)
Product status link
STB3NK60ZT4
STD3NK60Z-1
STD3NK60ZT4
STP3NK60Z
STP3NK60ZFP
AM01475V1
Features
Order codes V
DS
STB3NK60ZT4
STD3NK60Z-1
STD3NK60ZT4
STP3NK60Z
600 V
STP3NK60ZFP
• Extremely high dv/dt capability
• 100% avalanche tested
• Gate charge minimized
• Very low intrinsic capacitance
• Zener-protected
R
DS(on)
max.
3.6 Ω
I
D
2.4 A
Package
D 2 PAK
IPAK
DPAK
TO-220
TO-220FP
Applications
• Switching applications
Description
These high-voltage devices are Zener-protected N-channel Power MOSFETs developed using the SuperMESH™ technology by STMicroelectronics, an optimization of the well-established PowerMESH™. In addition to a significant reduction in on-resistance, these devices are designed to ensure a high level of dv/dt capability for the most demanding applications.
DS2912 - Rev 6 - August 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
1
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical ratings
Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter
D 2 PAK, TO-220
V
DS
V
GS
I
D
I
D
I
DM
P
TOT
Drain-source voltage
Gate-source voltage
Drain current (continuous) at T
C
= 25 °C
Drain current (continuous) at T
C
= 100 °C
Drain current (pulsed)
2.4
1.51
9.6
ESD
Total dissipation at T
C
= 25 °C
Gate-source human body model
(R = 1.5 kΩ, C = 100 pF)
45
V
ISO
Insulation withstand voltage (RMS) from all three leads to external heat-sink
(t = 1 s, T
C
= 25 °C)
Peak diode recovery voltage slope dv/dt
T j
T stg
Operating junction temperature range
Storage temperature range
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. I
SD
≤ 2.4 A, di/dt ≤ 200 A/μs, V
DSpeak
≤ V
(BR)DSS
, V
DD
= 80% V
(BR)DSS
.
Value
TO-220FP
600
±30
20
2.1
2.5
4.5
-55 to 150
DPAK, IPAK
2.4
1.51
9.6
45
Table 2. Thermal data
Symbol Parameter
D 2 PAK TO-220
R
R thj-case thj-amb
Thermal resistance junction-case
Thermal resistance junctionambient
R thj-pcb
Thermal resistance junction-pcb
1. When mounted on an 1-inch² FR-4, 2oz Cu board.
35
2.78
62.5
Value
TO-220FP
6.25
DPAK
2.78
IPAK
100
50
Symbol
I
AR
E
AS
Table 3. Avalanche characteristics
Parameter
Avalanche current, repetitive or notrepetitive
(pulse width limited by T j
Max)
Single pulse avalanche energy
(starting T j
= 25 °C, I
D
= I
AR
, V
DD
= 50 V)
Value
2.4
150
Unit
°C/W
°C/W
°C/W mJ
Unit
V
V
A
A
A
W kV kV
V/ns
°C
Unit
A
DS2912 - Rev 6 page 2/34
2
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical characteristics
Electrical characteristics
(T
CASE
= 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
V
(BR)DSS
Parameter
Drain-source breakdown voltage
I
D
= 1 mA, V
Test conditions
GS
= 0 V
I
DSS
Zero gate voltage drain current
V
GS
= 0 V, V
DS
= 600 V
V
GS
= 0 V, V
DS
= 600 V, T
C
= 125 °C
V
R
I
GSS
GS(th)
DS(on)
Gate body leakage current
Gate threshold voltage
Static drain-source on resistance
V
V
V
DS
DS
GS
= 0 V, V
GS
= V
GS
, I
D
= 10 V, I
1. Defined by design, not subject to production test.
D
= ±20 V
= 50 µA
= 1.2 A
Min.
600
3
Typ.
Max.
3.75
3.2
1
50
±10
4.5
3.6
µA
V
Ω
Unit
V
µA
µA
Table 5. Dynamic
Symbol
C iss
C oss
Parameter
Input capacitance
Output capacitance
Test conditions Min.
Typ.
311
43
Max.
Unit
V
DS
= 25 V, f = 1 MHz, V
GS
= 0 V pF
C rss
C oss eq.
Reverse transfer capacitance
Equivalent output capacitance
V
DS
= 0 to 480 V, V
GS
= 0 V -
8
26 pF
Q g
Q gs
Q gd
Total gate charge
Gate-source charge
Gate-drain charge
V
DD
= 480 V, I
D
(see Figure 16. Test circuit for gate charge behavior
)
= 2.4 A, V
GS
= 0 to 10 V
-
11.8
2.6
6.4
-
nC
1. C oss eq.
is defined as a constant equivalent capacitance giving the same charging time as C oss to 80% V
DSS
.
when V
DS
increases from 0
Symbol t d(on) t r t d(off) t f
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Table 6. Switching times
Test conditions
V
DD
= 300 V, I
D
= 1.5 A,
R
G
= 4.7 Ω, V
GS
= 10 V
)
Min.
-
Typ.
9
14
19
14
Max.
-
Unit ns
DS2912 - Rev 6 page 3/34
DS2912 - Rev 6
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical characteristics
Table 7. Source drain diode
Symbol
I
I
SD
SDM
Parameter
Source-drain current
Source-drain current
(pulsed)
Forward on voltage
Test conditions
V
I
SD t
Q rr rr
RRM
Reverse recovery time
Reverse recovery charge
Reverse recovery current
I
SD
= 2.4 A, V
GS
= 0 V
I
SD
= 2.4 A, di/dt = 100 A/µs
V
DD
= 48 V, T j
= 150°C (see
Figure 17. Test circuit for inductive load switching and diode recovery times
)
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
Min.
-
-
-
Typ.
Max.
2.4
9.6
1.6
306
948
6.2
Unit
A
V ns nC
A
Symbol
V
(BR)GSO
Parameter
Gate-source breakdown voltage
Table 8. Gate-source Zener diode
Test conditions
I
GS
= ±1 mA, I
D
= 0 A
Min.
±30
Typ.
-
Max.
-
Unit
V
The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device.
The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry.
page 4/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical characteristics curves
2.1
Electrical characteristics curves
Figure 1. Safe operating area
Figure 2. Thermal impedance
Figure 3. Safe operating area for TO-220FP
Figure 5. Output characterisics
Figure 4. Thermal impedance for TO-220FP
K GC20940
10 -1
10 -2
10 -3
10 -4 10 -3 10 -2 10 -1 10 0 t p
(s)
Figure 6. Transfer characteristics
DS2912 - Rev 6 page 5/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical characteristics curves
Figure 7. Static drain-source on resistance Figure 8. Gate charge vs gate-source voltage
.
Figure 9. Capacitance variations
Figure 10. Normalized gate threshold voltage vs temperature
Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristic
DS2912 - Rev 6 page 6/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Electrical characteristics curves
Figure 13. Normalized V
(BR)DSS
vs temperature Figure 14. Maximum avalanche energy vs temperature
DS2912 - Rev 6 page 7/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Test circuits
3
Test circuits
Figure 15. Test circuit for resistive load switching times
V
GS pulse width
V
D
R
G
R
L
+
2200
μF
3.3
μF
D.U.T.
V
DD
AM01468v1
Figure 17. Test circuit for inductive load switching and diode recovery times
Figure 16. Test circuit for gate charge behavior
12 V
V
GS pulse width
2200
μF
+
1 kΩ
I
G
= CONST
2.7 kΩ
47 kΩ
47 kΩ
100 nF
100 Ω
V
DD
1 kΩ
D.U.T.
V
G
AM01469v1
Figure 18. Unclamped inductive load test circuit
G
25 Ω
D
A
D.U.T.
S
B
+
_
R
G
A A fast diode
B
B
G
100 µH
D
D.U.T.
3.3
µF
S
+
1000
µF
V
DD
AM01470v1
Figure 19. Unclamped inductive waveform
V (BR)DSS
V D
I
DM
I D
V DD V DD
AM01472v1
V i pulse width
V
D
L
I
D
+
2200
µF
3.3
µF
V
DD
D.U.T.
AM01471v1
0
Figure 20. Switching time waveform t d(on) t on t r t d(off) t off t f
90% 90%
10%
V
GS
V
DS
90%
10%
0 10%
AM01473v1
DS2912 - Rev 6 page 8/34
4
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: www.st.com
. ECOPACK ® is an ST trademark.
DS2912 - Rev 6 page 9/34
4.1
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
D²PAK (TO-263) type A package information
D²PAK (TO-263) type A package information
Figure 21. D²PAK (TO-263) type A package outline
DS2912 - Rev 6
0079457_25 page 10/34
DS2912 - Rev 6
Dim.
e1
H
J1
L
L1
L2
R
V2
D
D1
D2
E
E1
E2 e
A
A1 b b2 c c2
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
D²PAK (TO-263) type A package information
Table 9. D²PAK (TO-263) type A package mechanical data mm
Typ.
1.14
0.45
1.23
8.95
7.50
Min.
4.40
0.03
0.70
1.10
10.00
8.30
6.85
7.75
1.30
8.50
7.05
2.54
4.88
15.00
2.49
2.29
1.27
1.30
0.40
0°
5.28
15.85
2.69
2.79
1.40
1.75
8°
1.70
0.60
1.36
9.35
8.00
Max.
4.60
0.23
0.93
1.50
10.40
8.70
7.25
page 11/34
DS2912 - Rev 6
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
D²PAK (TO-263) type A package information
Figure 22. D²PAK (TO-263) recommended footprint (dimensions are in mm)
Footprint page 12/34
4.2
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
D²PAK packing information
D²PAK packing information
Figure 23. D²PAK tape outline
DS2912 - Rev 6 page 13/34
DS2912 - Rev 6
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
D²PAK packing information
Figure 24. D²PAK reel outline
T
40mm min. access hole at slot location
D
B
C
A
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
Dim.
E
F
K0
P0
P1
P2
R
T
W
A0
B0
D
D1
Min.
1.65
11.4
4.8
3.9
11.9
1.9
50
0.25
23.7
10.5
15.7
1.5
1.59
Tape
Table 10. D²PAK tape and reel mechanical data
Reel mm
Dim.
Max.
10.7
15.9
1.6
1.61
1.85
11.6
5.0
4.1
12.1
2.1
C
D
A
B
G
N
T
Base quantity
Bulk quantity
Min.
1.5
12.8
20.2
24.4
100
0.35
24.3
mm
AM06038v1
Max.
330
13.2
26.4
30.4
1000
1000 page 14/34
4.3
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
IPAK (TO-251) type A package information
IPAK (TO-251) type A package information
Figure 25. IPAK (TO-251) type A package outline
DS2912 - Rev 6
0068771_IK_typeA_rev14 page 15/34
DS2912 - Rev 6
Dim.
D
E e c c2 e1
H
L
L1
L2
V1
A
A1 b b2 b4
B5
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
IPAK (TO-251) type A package information
Table 11. IPAK (TO-251) type A package mechanical data mm
Typ.
Min.
2.20
0.90
0.64
5.20
0.45
0.48
6.00
6.40
4.40
9.00
0.80
0.30
2.28
16.10
0.80
10°
0.60
0.60
6.20
6.60
4.60
Max.
2.40
1.10
0.90
0.95
5.40
9.40
1.20
1.00
page 16/34
4.4
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
IPAK (TO-251) type C package information
IPAK (TO-251) type C package information
Figure 26. IPAK (TO-251) type C package outline
DS2912 - Rev 6
0068771_IK_typeC_rev14 page 17/34
DS2912 - Rev 6
Dim.
c2
D
D1
E
E1 e e1
A
A1 b b2 b4 c
L2
θ1
θ2
H
L
L1
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
IPAK (TO-251) type C package information
Table 12. IPAK (TO-251) type C package mechanical data
Min.
2.20
0.90
0.66
mm
Typ.
2.30
1.00
5.20
6.50
4.60
2.20
4.40
5.23
0.46
0.46
6.00
16.18
9.00
0.80
0.90
3°
1°
5.33
6.10
5.37
6.60
4.78
2.25
4.50
16.48
9.30
1.00
1.08
5°
3°
16.78
9.60
1.20
1.25
7°
5°
5.55
6.70
4.95
2.30
4.60
0.90
5.43
0.59
0.59
6.20
Max.
2.35
1.10
0.79
page 18/34
4.5
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type A package information
DPAK (TO-252) type A package information
Figure 27. DPAK (TO-252) type A package outline
DS2912 - Rev 6
0068772_A_25 page 19/34
DS2912 - Rev 6
Dim.
c2
D
D1
E
E1 e e1
A
A1
A2 b b4 c
L2
L4
R
V2
H
L
(L1)
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type A package information
Table 13. DPAK (TO-252) type A mechanical data mm
Typ.
9.35
1.00
2.60
0.65
0.60
4.95
6.40
4.60
2.159
4.445
0.64
5.20
0.45
0.48
6.00
Min.
2.20
0.90
0.03
5.10
4.70
2.286
4.572
2.80
0.80
0.20
0°
10.10
1.50
3.00
0.95
1.00
5.25
6.60
4.80
2.413
4.699
0.90
5.40
0.60
0.60
6.20
Max.
2.40
1.10
0.23
8° page 20/34
4.6
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type C package information
DPAK (TO-252) type C package information
Figure 28. DPAK (TO-252) type C package outline
DS2912 - Rev 6
0068772_C_25 page 21/34
DS2912 - Rev 6
Dim.
L
L1
L2
L3
L4
L6
θ1
θ2
V2 c2
D
D1
E
E1 e
H
A
A1
A2 b b4 c
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type C package information
Table 14. DPAK (TO-252) type C mechanical data
0.72
5.13
0.47
0.47
6.00
Min.
2.20
0.90
0.00
5.25
6.50
4.70
2.186
9.80
1.40
mm
Typ.
2.30
1.01
5.33
6.10
6.60
2.286
10.10
1.50
2.90 REF
0.90
0.60
5°
5°
0°
0.51 BSC
0.80
1.80 BSC
7°
7°
6.70
2.386
10.40
1.70
1.25
0.85
5.46
0.60
0.60
6.20
Max.
2.38
1.10
0.10
1.00
9°
9°
8° page 22/34
4.7
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type E package information
DPAK (TO-252) type E package information
Figure 29. DPAK (TO-252) type E package outline
DS2912 - Rev 6
0068772_type-E_rev.25
page 23/34
DS2912 - Rev 6
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) type E package information
Dim.
D
D1
E
E1 e e1
H
L
L1
L2
L4
A
A2 b b4 c c2
Table 15. DPAK (TO-252) type E mechanical data
Min.
2.18
mm
Typ.
5.97
5.21
6.35
4.32
0.65
4.95
0.46
0.46
2.286
4.572
9.94
1.50
0.89
2.74
Figure 30. DPAK (TO-252) recommended footprint (dimensions are in mm)
10.34
1.78
1.27
1.02
Max.
2.39
0.13
0.884
5.46
0.61
0.60
6.22
6.73
FP_0068772_25 page 24/34
4.8
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) packing information
DPAK (TO-252) packing information
Figure 31. DPAK (TO-252) tape outline
T
Top cover tape
10 pitches cumulative tolerance on tape +/- 0.2 mm
P0 D P2
F
E
W
B1
K0
For machine ref. only including draft and radii concentric around B0
B0
A0 P1
User direction of feed
D1
User direction of feed
R
Bending radius
AM08852v1
DS2912 - Rev 6 page 25/34
DS2912 - Rev 6
Dim.
D1
E
F
K0
P0
A0
B0
B1
D
P1
P2
R
T
W
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
DPAK (TO-252) packing information
Figure 32. DPAK (TO-252) reel outline
T
40mm min. access hole at slot location
D
B
C
A
N
G measured at hub
Full radius
Tape slot in core for tape start
2.5mm min.width
AM06038v1
2.55
3.9
7.9
1.9
40
0.25
15.7
1.5
1.5
1.65
7.4
Table 16. DPAK (TO-252) tape and reel mechanical data
Tape Reel mm
Dim.
Min.
6.8
10.4
Max.
7
10.6
12.1
1.6
C
D
A
B
G
N
T
Min.
1.5
12.8
20.2
16.4
50 1.85
7.6
2.75
4.1
8.1
2.1
0.35
16.3
Base qty.
Bulk qty.
mm
Max.
330
13.2
18.4
22.4
2500
2500 page 26/34
4.9
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
TO-220 type A package information
TO-220 type A package information
Figure 33. TO-220 type A package outline
DS2912 - Rev 6
0015988_typeA_Rev_21 page 27/34
DS2912 - Rev 6
Dim.
E e e1
F
H1
J1
L b1 c
A b
D
D1
L1
L20
L30
øP
Q
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
TO-220 type A package information
Table 17. TO-220 type A package mechanical data mm
Typ.
Min.
4.40
0.61
1.14
0.48
15.25
1.27
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
16.40
28.90
3.75
2.65
3.85
2.95
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
Max.
4.60
0.88
1.55
0.70
15.75
page 28/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
TO-220FP package information
4.10
TO-220FP package information
Figure 34. TO-220FP package outline
DS2912 - Rev 6
7012510_Rev_12_B page 29/34
DS2912 - Rev 6
Dim.
F2
G
G1
H
L2
L3
L4
L5
L6
L7
Dia
D
E
A
B
F
F1
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
TO-220FP package information
Table 18. TO-220FP package mechanical data mm
Typ.
Min.
4.4
2.5
2.5
0.45
0.75
1.15
1.15
4.95
2.4
10
16
28.6
9.8
2.9
15.9
9
3
Max.
4.6
2.7
2.75
0.7
1
1.70
1.70
5.2
2.7
10.4
30.6
10.6
3.6
16.4
9.3
3.2
page 30/34
5
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Ordering information
Ordering information
Order code
STB3NK60ZT4
STD3NK60Z-1
STD3NK60ZT4
STP3NK60Z
STP3NK60ZFP
Table 19. Order codes
Marking
B3NK60Z
D3NK60Z
P3NK60Z
P3NK60ZFP
Package
D 2 PAK
IPAK
DPAK
TO-220
TO-220FP
Packing
Tape and reel
Tube
Tape and reel
Tube
Tube
DS2912 - Rev 6 page 31/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Revision history
Date
07-Jul-2003
20-Aug-2018
Version
5
6
Table 20. Document revision history
Changes
Updated document.
Updated Section 1 Electrical ratings ,
Section 2 Electrical characteristics
Minor text changes.
DS2912 - Rev 6 page 32/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
Contents
Contents
DS2912 - Rev 6 page 33/34
STB3NK60ZT4,STD3NK60Z-1,STD3NK60ZT4,STP3NK60Z,STP3NK60ZFP
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS2912 - Rev 6 page 34/34
Lejupielādēt
Publiskā saite ir atjaunināta
Ir atjaunināta publiskā saite uz jūsu tērzēšanu. You may view and manage your chat links after registration here.
Dokumenta publiskā saite
Reklāma