Siemens M75 Mobile Phone User Manual

s

Siemens Aktiengesellschaft, issued by Communications,

Haidenauplatz 1

D-81667 Munich

© Siemens AG 2005

All rights reserved. Subject to availability.

Rights of modification reserved.

Siemens Aktiengesellschaft www.siemens.com/m75 s

Designed for life

M75

right page (1) of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)

Table of

Contents

See also Index at the end of this User

Guide

Safety precautions ..................... 3

Overview of phone .................... 5

Display symbols ......................... 7

Getting started ........................... 9

Insert SIM card/battery ............. 9

Inserting an

RS MultiMediaCard ................. 10

Charge battery ....................... 11

Switch on/off, PIN entry ........... 12

Entering the PIN ..................... 12

Emergency number (SOS) ...... 12

General instructions ................ 13

Standby mode ....................... 13

Signal strength ...................... 13

Digital Rights Mgmt. (DRM) .... 13

Main menu ............................ 13

Standard functions .................. 15

Highlighting mode ................. 16

Menu speed dialling ............... 16

Security .................................... 17

PIN codes ............................... 17

Preventing accidental activation ............................... 18

Text entry ................................. 19

Calling ...................................... 23

My items .................................. 29

Default book ............................ 30

Addressbook ............................ 31

New entry .............................. 31

Change entry ......................... 33

Call entry ............................... 33

Groups ................................... 34

Table of Contents 1

Phonebook ...............................35

New entry ..............................35

Call (search for an entry) ........36

Change entry .........................36

<Special books> .....................37

Call records ...............................38

Durat/charges ...........................39

Camera .....................................40

Photo mode ...........................41

Video mode ............................41

Inbox ........................................43

SMS ...........................................44

Write/send ..............................44

Read .......................................46

Setting ...................................48

MMS .........................................50

Create ....................................50

Templates ..............................52

Send ......................................53

Receive ..................................54

Read .......................................55

Setting ...................................56

E-mail ........................................58

Write ......................................58

Receive/read ...........................59

Setting ...................................60

Voice message/mailbox ............61

Inst. message ...........................62

Start menu .............................62

Login .....................................63

Contact lists ...........................63

Start Inst. message .................66

See also Index at the end of this User Guide

left page (2) of M75 Sirius FUG en, A31008-H7430-A1-1-7619 (04.06.2005, 09:01)

2 Table of Contents

Msg. history ........................... 67

Setting ................................... 67

CB services ............................... 69

Text zoom .............................. 69

Surf & fun ................................. 70

Internet ................................. 70

Bookmarks ............................. 72

Games and Applications ......... 73

Downl. assist. ......................... 73

Setup ........................................ 75

Profiles .................................. 75

Themes .................................. 77

Display setup ......................... 78

Ringtones .............................. 80

Call setup ............................... 82

Phone setup ........................... 84

Clock ..................................... 86

Connectivity .......................... 87

Security ................................. 93

Network ................................ 95

Accessories ............................ 97

My menu .................................. 98

Fast access ............................... 99

Speed dialling keys ............... 100

Organiser ............................... 101

Calendar .............................. 101

Appointments ...................... 102

Tasks ................................... 103

Notes ................................... 104

Missed appts. ....................... 104

Dictat.machine .................... 105

Time zones .......................... 106

See also Index at the end of this User Guide

Extras ......................................107

SIM services (optional) .........107

Music player .........................107

Push to talk ..........................108

Alarm clock ..........................113

Sound recorder .....................114

Calculator .............................115

Unit converter ......................116

Stopwatch ............................117

Countdown ..........................117

Remote synchronisation .......118

Device manag. .....................119

Media player ...........................120

My stuff ..................................121

RS MultiMediaCard ...............122

Mobile Phone Manager ..........123

Questions & Answers .............125

Customer Care ........................128

Care and maintenance ...........130

Product data ...........................131

Accessories .............................132

SAR – European Union (RTTE) ..134

SAR – International (ICNIRP) ..136

Quality ....................................137

Guarantee certificate (UK) .....138

Guarantee certificate (IRL) .....139

License Agreement .................140

Menu tree ...............................143

Index .......................................149


Safety precautions

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with legal requirements and local restrictions when using the phone. For example in aeroplanes, petrol stations, hospitals or while driving.

Mobile phones can interfere with the functioning of medical devices such as hearing aids or pacemakers. Keep at least

20 cm/9 inches between phone and pacemaker. When using the mobile phone hold it to the ear which is further away from the pacemaker. For more information consult your doctor.

Small parts such as the SIM card, sealing stop, lens ring and lens cap can be dismantled and swallowed by small children.

The phone must therefore be stored out of the reach of small children.

Do not use an optical magnifier to look at the activated infrared interface [Class 1 LED product

(classification as per

IEC 60825-1)].

The mains voltage specified on the power supply unit (V) must not be exceeded. Otherwise the charging device may be destroyed.

The power supply must be plugged into an easily accessible AC mains power socket when charging the battery. The only way to turn off the charging device after charging the battery is to unplug it.

The ringtones (p. 80), message

tones (p. 84)

and handsfree

(p. 25) talking are reproduced

through the loudspeaker. Do not hold the phone to your ear when it rings or when you have switched on the handsfree func-

tion (p. 25). Otherwise you risk

serious permanent damage to your hearing.

Only use original Siemens batteries (100% mercury-free) and

– charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance.

3


4 Safety precautions

You may only open the phone to replace the battery (100% mercury-free) or SIM card. You must not open the battery under any circumstances. All other changes to this device are strictly prohibited and will invalidate the guarantee.

Please dispose of unwanted batteries and phones as permitted by the laws in your country.

The phone may cause interference in the vicinity of TV sets, radios and PCs.

Use only Siemens original accessories. This will avoid potential risks to health or property and ensure compliance with all relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to

Siemens original accessories.

Bluetooth

®

Your phone has a Bluetooth interface. This makes it possible to establish a wireless connection of your phone with a headset of a car kit, or with other Bluetooth-enabled devices.

In order to establish a secure link between the devices and to prevent a third party from having access to your phone, you should observe the following points:

• The initial connection between two devices, what is called "pairing", should take place in familiar surroundings.

• Both devices must be able to identify themselves one time by using a password/

PIN. To ensure sufficient security, you should choose a 16-digit number combination for a password that would be difficult to guess (if a PIN has not been assigned).

• An automatic connection acceptance

("connection without confirmation") should only be used in exceptional cases.

• In general, only trustworthy devices should be linked in order to minimize security risks.

• The name of your phone is transmitted in a Bluetooth connection. The factory default is the "Bluetooth ID". The first time

Bluetooth is activated, or later in the

Bluetooth menu, you can change this name ( My BT name

(page 89)).

• If Bluetooth is not needed, this function should be deactivated.

Before using Bluetooth accessories, or a mobile phone inside a vehicle, check the vehicle user guide for any limitations on the use of these products.


Overview of phone

Overview of phone

1

A

B

C

Call key

Dial displayed/highlighted phone numbers/names, take calls. In standby mode, show last phone numbers dialled.

2 On/Off/End key

• Switched off: press and hold to switch on.

• During a conversation or in an application: press briefly to finish.

• In menus: press briefly to go back a level.

Press and hold to return to standby mode.

• In standby mode: press and hold to switch off phone.

3

Joystick

Press the joystick down vertically to start an application or function. The current function is displayed between the softkeys

(page 14).

In standby mode

C

Open main menu.

G

Open user profiles.

H

Open Phonebook/

Addressbook.

E

Open Inbox .

D

Start the camera.

In lists, messages and menus

I

Scroll up and down.

D

Back one level.

During a call

I

Set volume.

E

Call options.

Z

£

X

Service provider

01.05.2005

Inbox

í

10:10

New SMS

4

< >

Softkeys

The current functions of this key are shown in the bottom line of the displays as §Text§ /symbol (e.g. p

).

5

Internet

Access to the Internet portal.

5


6 Overview of phone

1

Integrated antenna

Do not obstruct the phone above the battery cover unnecessarily. This reduces the signal quality.

2

Loudspeaker

3

Sidekeys

a

Camera

• Press in standby mode:

Start the camera.

• During a call: Decrease volume.

b

Push to talk

6

• Press in standby mode :

Start push to talk.

• During a call: Increase volume.

4 Display

5

Infrared interface (IrDA)

*

#

Ringtone

• Press and hold in standby mode: switch acoustic signals on/off

(except for alarm clock).

• Press and hold when incoming call is received: switch off ringtone for this call only.

7

Key lock

Press and hold in standby mode or when playing a music file:

Switch key lock on/off.

8

Connection socket

For charger, headset, flash, etc.

9

Slot for RS MultiMediaCard

:

Car kit holder

!

Connection for external antenna

" Camera lens

§

Mirror

Z

£

X


01.05.2005

Inbox

í

10:10

New SMS


Display symbols

Display symbols

Display symbols (selection)

Z

Strength of receiving signal

Y

Charging

W

Battery charge level, e.g. 50%

L

Phonebook

P

Call records

O

Surf & fun/

Service provider portal

Q

Organiser

M

Messages

R

Camera

S

Extras

N

My stuff

T

Setup

Ç

All calls are diverted

¿

Ringer (beep) off

¾

Short ring (beep) only

¼

Ringtone only if the caller is stored in the Phonebook

¹

Ä

Alarm set

Keypad locked

Å

Auto answer feature on

£

Activated and available

¢

Registered

¤

Temporarily interrupted

±

Internet offline

²

Internet online

³

Internet via GPRS online

´

Internet no network

¯

IrDA activated

®

IrDA transmission

¨

Bluetooth activated

ª

Bluetooth transmission

Events (selection)

ã

SMS memory full

ä

MMS memory full

å

Phone memory full

Æ

No network access

Â

Missed call

Ê

Memory assistant

7


8 Display symbols

Message symbols (selection)

p

Unread

q

Read

r

Draft

s

Sent

t

MMS not sent

w

MMS notification received

x

MMS notification read

y

MMS with DRM contents

(page 13)

z

E-mail forwarded

{

E-mail with attachment

À

Voice mail received

Camera symbols

È

Switch to photo mode

É

Switch to video mode

Ù

Brightness

Ú

Zoom factor

Û

×

White balance

Flash connected


Getting started

Getting started

The phone is packaged in dismantled form and must be re-assembled prior to using for the first time.

Your phone's display is supplied with a protective film .

Remove this film slowly before assembling the phone.

the SIM card in using gentle pressure 1 (ensure that the chamfered corner is in the correct position).

1

2

In rare cases, static discharge may cause discolouration at the edges of the display. However, this will disappear within approx. 10 minutes.

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the important data for your line is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges.

• Place the SIM card flat in front of the slot with the contact surface facing downwards . Then push

3

• To remove the SIM card push the latch downwards 2 and pull out the SIM card in shown direction

3 . Please do not use any tools.

• Insert the battery sideways into the phone downwards position.

5

4 , then press it

until it clicks into

4

5

• To remove the battery, pull it out with the retaining tab on the side.

9


10 Getting started

• Place the cover in position and push it towards the front 6 .

6

Inserting an

RS MultiMediaCard

When delivered, the RS MultiMedia-

Card is not yet in the phone.

• To insert the RS MultiMediaCard, gently push the card right in until it clicks into place 1 .

• Close the cover by turning the locking catch ninety degrees clockwise 7 .

1

• If necessary, use the plug 2 .

7

Additional information

Please switch off your phone before removing the battery!

The phone supports 1.8 V and 3 V SIM cards. Please contact your service provider if you have an older card.

2

• Before removing the RS MultiMedia-

Card, carry out the Eject card function in the My stuff options menu.

This prevents any possible data loss.

• To remove the RS MultiMedia-

Card, open the cover and press the card briefly (if necessary, use the plug). The card will pop out a little and you can remove it. Finally, close the cover again.


Charge battery

Charging procedure

The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours .

Display during charging.

Y

Charging time

An empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to 45 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning.

The mains voltage specified on the power supply unit must not be exceeded.

Operating times

The operating time depends upon the respective conditions of use.

Extreme temperatures considerably reduce the phone’s standby time.

Avoid placing the phone in the sun or on a heater.

Talktime: up to 300 minutes

Standby time: up to 250 hours

Getting started 11

Charge icon not visible

If the battery has been discharged fully, the charge icon is not immediately visible when the power supply is plugged in. It will appear after up to two hours. In this case, the battery is fully charged after 3 to 4 hours.

Only use the plug-in power supply unit included in delivery!

Display while in service

Charge level display during operation (empty–full):

V W X

A beep sounds when the battery is nearly empty. The charge level of the battery is only displayed correctly after an uninterrupted charging/discharging cycle. Therefore do not remove the battery unnecessarily , and where possible, do not end the charging process prematurely.


The power supply unit heats up when used for long periods. This is normal and not dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.


12 Switch on/off, PIN entry

Switch on/off, PIN entry

Switching phone on/off

B

Press and hold the On/Off/

End key.

Entering the PIN

The SIM card can be protected with a 4 to 8-digit PIN.

J

§OK§

Enter the PIN using the number keys. The characters

****

appear to ensure nobody can read your PIN on the display.

Correct with

]

.

Confirm. Logging on to the network will take a few seconds.


Change PIN..................................page 17

Clear SIM card barring .................page 18

Emergency number

(SOS)

Only to be used in real emergencies!

By pressing the §SOS§ softkey you can make an emergency call on any network without a SIM card and without entering a PIN (not available in all countries).

Switching your phone on for the first time

Time/date

Set the clock correctly on a one-off basis when getting started.

C

J

C

Press this key, then select

§Change§ .

First enter the date (day/ month/year), then the time (24 hours, including seconds).

Press. The time and date are updated.

Time zones

Set the time zone for your area.

I

§Set§

Select the city in the desired time zone from the list ...

... and set it.

Copy SIM addresses

The first time the SIM card is inserted, the entries on it can be copied to the Addressbook. Please do not interrupt this procedure . During this time, do not accept incoming calls . Follow the instructions in the display.

You can also copy data from the

SIM card at a later time (page 36).


General instructions

General instructions

Standby mode

The phone is in standby mode and is ready for use when the name of the service provider appears on the display.

B

Press and hold the On/Off/

End key to return to standby mode from any situation.

Signal strength

Strong receiving signal.

Z

[

A weak signal reduces the voice quality, can cause the connection to be lost, and consumes more current. Change your location.

Digital Rights Mgmt.

(DRM)

Remember that your phone has

Digital Rights Management. The use of downloaded pictures, sounds or applications can be restricted by the suppliers, e.g. copy protection, use for a limited period of time only, the number of times it can be used etc.

(see also page 74).

Main menu

The main menu is displayed graphically with symbols:

C

Call main menu up from standby mode.

F

/

I

Select the application symbols.

C

Start an application.

Main menu options

§Options§ Open menu.

Different functions are available depending on the context.

Big letters Select one of two font sizes.

Illumination Set display illumination to brighter/darker.

Eject card Allows the RS MultiMedia-

Card to be removed without loss of data.

13


14 General instructions

User guide

Menu controls

The steps needed to reach a function are shown in a condensed form in the user guide, e. g. to display record of dialled calls in condensed form:

C

¢

P

¢ Calls dialled

This comprises the following steps:

C

Open main menu.

G

Select

P

.

C

Confirm.

H

Select Calls dialled function.

Confirm.

C

Symbols

The following symbols are used to explain operation:

J

B

A

Enter numbers or letters.

On/Off/End key

Call key

< >

Softkeys

§Menu§ Displays a softkey function.

C

Press vertically down on the joystick (to call up the menu, for example).

D F E

H

I

G

=

Press the joystick in the direction indicated.

Function dependent on service provider. May require special registration.

C

Press joystick

The symbol in the centre of the lower line of the display shows the current function when the joystick is pressed down vertically.

í

Display

î

ï

Zoom

ð

Call,

ì

OK

ñ

/

ò

Play/Pause for sounds & videos.


Standard functions

Standard functions

Option menus

Functions which appear repeatedly in the options menu are listed here.


Edit Open the entry to edit.

View Display entry.

Delete/

Delete all

Reply/

Reply to all

Delete entry/delete all entries after confirmation.

New entry Create new entry.

Send...

Select transmission service and medium for sending or printing e.g. IrDA or

Bluetooth.

The sender becomes the recipient, “Re:” is placed in front of the subject matter and the received text is transferred to the new message.

Save

Sort

Save entry.

Save to 9 Save recipients in the current address directory.

Set sort criteria (alphabetical order, type, time).

Text input

(page 19)

T9 preferred : Activate/ deactivate T9 input.

Input language : Select language for text.

Rename Rename selected entry.

Capacity

Help

Display memory capacity.

Attributes Display properties of the highlighted object.

Display help text.

15


16 Standard functions

Highlighting mode

With some applications (e.g. Phonebook/Addressbook), you can highlight one or more entries in a list in order to carry out a function jointly.


Mark Activate highlighting mode.

Select entry/entries.

I

C

§Mark§

Highlight or delete highlighting.

The current entry is highlighted.

§Unmark§ Unhighlight the current entry.

Additional highlighting functions:


Mark all Highlight all entries.

Unmark all Delete highlighting on all highlighted entries.

Delete marked

All highlighted entries are deleted.

Menu speed dialling

All menu functions are numbered internally. A function may be selected directly by entering these numbers in sequence.

E.g., to write new SMS (from standby mode):

C

Press to display the main menu. Then press for Messages , then

5

1 for Create new , then for SMS .

1


Security

Security

The phone and SIM card are protected against misuse by several security codes.

Keep these security codes in a safe place where you can access them again if required.

PIN codes

PIN

PIN2

PUK

PUK2

Phone code

Protects your SIM card

(Personal Identification

Number).

This is needed to set the charge detail display and to access additional functions on special

SIM cards.

Key code. Used to unlock SIM cards after the wrong PIN has been entered repeatedly.

Protects your phone. Must be entered at the first security setting.

C

¢

T

¢

Security

¢

PIN codes

¢ Select function.

PIN control

The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone.

Some service providers do not permit deactivating the control.

§Change§ Press.

Enter PIN.

J

C

Confirm entry.

Change PIN

You can change the PIN to any 4 to

8-digit number you find easier to remember.

§Select§ Press.

J

Enter current PIN.

Press.

C

J

,

C

Enter new PIN.

J

,

C

Repeat new PIN.

17


18 Security

C

¢

T

¢ Security ¢ PIN codes

¢

Select function.

Change PIN2

(Display only if PIN2 is available)

Proceed as for Change PIN .

Chg.phonecode

(Change phone code)

You define the phone code (4 to

8 digits) when you call up a phonecode protected function for the first time (e.g. Direct call

, page 27). It is

then valid for all phone-code protected functions.

Following the third unsuccessful attempt, access to the phone code and the functions that use it is denied. If this occurs, contact Siemens Service

(page 128).

Clear SIM card barring

If the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN) provided by your service provider with the

SIM card in accordance with the instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider.

Preventing accidental activation

Even if PIN control is deactivated

(page 17) confirmation is required

to switch on the phone.

This prevents accidental activation of the phone, e.g. when you are carrying it in a bag or when you are travelling in an aircraft.

Press and hold .

B

§OK§ Press. The phone switches on.

§Cancel§ Press this key or take no action. The phone does not switch on.


Text entry 19

Text entry

Text entry without T9

Press the number key repeatedly until the required character appears.

After a brief interval the cursor will advance. Example:

2

Press once briefly to write the letter a , twice to write b etc.

Press and hold to write the number.

Ä, ä, 1–9 Unusual characters and numbers are displayed after the relevant letters.

]

Press briefly to delete the letter before the cursor.

Press and hold to erase the whole word.

F

Move the cursor

(forwards/back).

#

Press briefly: Swap between abc , Abc , T9 abc ,

T9 Abc , 123 . Status shown in top line of display.

Press and hold: all inputvariants are displayed.

*

0

1

Press briefly: special characters are shown.

Press and hold: open input menu.

Press once/repeatedly :

. , ? ! ’ " 0 + - ( ) @ / : _

Press and hold: writes 0 .

Writes blank. Press twice = line break.

Special characters

*

Press briefly . The symbols chart is displayed:

1 ) ¿ ¡ _ ; .

, ? !

+ - " ’ : * / ( )

¤ ¥ $ £ € @ \ & #

[ ] { } % ~ < = >

| ^ ` § Γ ∆ Θ Λ Ξ

Π Σ Φ Ψ Ω

1 ) Line break

I

,

F

Navigate to characters.

C

Press.


20 Text entry

Input menu

For text input:

*

Press and hold . The input menu is displayed:

Text format (SMS only)

Input language

Mark

Copy / Insert

Text entry with T9

“T9” deduces the correct word from the individual key entries by making comparisons with an extensive dictionary.

Activate, deactivate T9

§Options§ Open text menu.

T9 input Select.

§Change§ Activate T9.

Select input language

Select the language in which you want to compose your message.


Input language

Select.

I

§Select§

Select language.

Confirm. The new language is set. Languages with T9 support are marked with the T9 symbol.

Writing with T9

The display changes as you proceed.

It is therefore best if you finish a word without looking at the display.

Simply press the keys once where the relevant letter is located. For “hotel”, for example:

Press briefly for T9 Abc then

#

46835

1

A blank ends a word.

Do not use special characters such as

Ä. Use standard characters instead, e.g. A; T9 will do the rest for you.

T9® Text Input is licensed under one or more of the following:

U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945,928 and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide.


T9 word suggestions

If several options are found in the dictionary for a key sequence (a word), the most probable is displayed first. If the word you want has not been recognised, the next suggestion from T9 may be correct.

The word must be shown

§highlighted§ . Then press

^

^

Press. The displayed word is replaced with a different word. If this word is also incorrect, press again.

Press. Repeat until the correct word is displayed.

If the word you want is not in the dictionary, it can also be written without T9.

To add a word to the dictionary:

§Spell§ Select.

The last suggestion is deleted and the word may now be entered without T9 support. Press §Save§ to add it automatically to the dictionary.

Text entry

Correct a word

F

Move left or right, word by word, until the required word is

§highlighted§ .

^

Scroll through the T9 word suggestions again.

]

Deletes the character to the left of the cursor and displays a new possible word.


Within a “T9 word“, individual letters may not be edited without first removing the T9 status. In most cases it is better to rewrite the complete word.

0

Set a full stop. The word is concluded if it is followed by a space. Within a word, a full stop represents an apostrophe or hyphen:

# e.g. §provider.s§ = provider’s.

E

Moving the cursor to the right ends the word.

Press briefly: switch between: abc , Abc , T9 abc ,

T9 Abc , 123 . Status shown in top line of display.

*

Press and hold: all input variants are displayed.

Press briefly: select special

characters (page 19).

Press and hold: opens input

menu (page 20).

21


22 Text entry

Text modules

Text modules can be stored in the phone for adding to your messages

(SMS, MMS, e-mail).

Write text modules

C

¢

M

¢

Text modules

<New entry>

Select.

C

The input field is opened.

J

Write text.

§Options§ Open menu and select

Save . Accept the suggested name or allocate a new one.

C

Save.

Use text modules

J

Write message

(SMS, MMS, e-mail).


Insert...

Select.

Select Text module .

I

I

Select text module from the list.

§Select§

C

Confirm. The text module is displayed.

Confirm. The text module is inserted in the message to the right of the cursor.


Calling 23

Calling

Dialling with number keys

The phone must be switched on

(standby mode).

J

A

Enter the number (always with area/international dialling code).

]

A short press clears the last digit, a long press clears the entire phone number.

Press the Call key. The displayed phone number is dialled.

End call

B

Press the End key briefly .

Press this key even if the person on the other end of the line has hung up first.

Set volume

It is only possible to adjust the volume during a call.

I

With the joystick or with the sidekeys.

If a car kit is used, its volume setting will not affect the usual setting on the phone.

Redial previous numbers

To redial the phone number last called:

Press the Call key twice .

A

To redial other numbers that were dialled previously:

Press the Call key once .

A

I

Pick out the phone number from the list, then to dial press the …

... key.

A


24 Calling

If the number is busy

If the called number is busy or cannot be reached because of network problems several options are available (depending on the service provider). An incoming call or any other use of the phone interrupts these functions.

Either

Auto. redial

§Auto dial§ The phone number is automatically dialled ten times at increasing time intervals. End with:

B

End key.

Or

Call back

b

§Call back§ Your phone rings when the busy number is free.

Press the Call key to dial the number.

Reminder

§Prompt§ A beep reminds you to redial the displayed phone number after 15 minutes.


Ð

Store phone number in the

Addressbook/Phonebook.

§Handsfr.§

Switch on Handsfree (play-

back from loudspeaker).

*

Press and hold to switch microphone off.

International dialling codes

0

Press and hold until a “+” is displayed.

§Country§ Press and select country.

Phone number memo

You can enter a phone number during the call. The person to whom you are speaking can hear these entries. When the connection has ended you can save or dial the phone number.


Accept call

The phone must be switched on. An incoming call will interrupt any other use of the phone.

C

Press.

Or

Press.

A

A phone number transmitted by the network plus the corresponding name (possibly with a picture) are displayed if they are stored in the

Phonebook/Addressbook (page 32).

Reject call

§Reject§ Press.

Or

B

Press .

Warning!

Please make sure you have accepted the call before holding the phone to your ear.

This will avoid damage to your hearing from loud ringtones.


*

Press and hold to switch off the ringtone and silent alert.

Â

Missed call display.

Calling 25

Handsfree

You can put the phone down during a call. You can then hear the caller via the loudspeaker.

§Handsfr.§ Activate handsfree talking.

Switch on.

C

I

Regulate the volume with the joystick.

§Handsfr.§ Deactivate.

Warning!

Always switch off “handsfree talking” before holding the phone to your ear!

Otherwise, you will damage your hearing!

Swap between 2 calls

b

Establish a second connection

You can call another number during a call.

C

Open call menu.

Hold

J

The current call is put on hold.

Now dial the new phone number or select

C

Open the call menu, then select Default book , and then select the phone number.

When the new connection is established:

§Swap§ Swap between calls.


26 Calling

Incoming calls during a call

You may need to register for this service with your service provider and set your phone accordingly

(p. 82). During a call, you may be ad-

vised that there is another call waiting. You will hear a special tone during the call. You have the following options:

• Accept the waiting call in addition to the first

§Swap§ Accept the waiting call, putting the current call on hold to do so.

Always proceed as above to swap between the two calls.

• Reject the waiting call

§Reject§ Press.

§Divert§

Or

The waiting call is diverted, for example, to the mailbox.

• Accept the waiting call and end the current call

B

End the current call.

Accept new call.

C

End call(s)

Press the End key.

B

After the Return to held call?

display, you have the following selection:

§Yes§

§No§

You accept the call on hold.

You end the second call too.

Conference

b

Call up to 5 parties one by one and link them together in a multiparty call. Some of the functions described may not be supported by your service provider or may have to be enabled specially.

A connection has already been established:

C

Open the call menu and select Hold . The current connection is maintained.

J

C

Now dial a new number.

When the new connection is established ...

... Open the call menu and select Conference . The held call is joined.

Repeat procedure until all participants are linked together (up to

5 participants).


Calling 27

End

B

All calls in the conference are ended when you press the End key.

Call options

The following functions are only available during a call:

C

Press.

Hold Hold current call.

Microphone on

If switched off, the person on the other end of the line cannot hear you (muting).

Also:

*

Press and hold.

Handsfree Playback through the loudspeaker.

Volume Adjust handset volume.

Default book Phonebook/Addressbook.

Conference

(page 26)

Time/charge Display talktime that has elapsed so far and (if set) charges incurred during

the connection (page 39).

Send DTMF Enter tone sequences

(numbers) for remote inquiries to an answering machine.

Call transfer

=

Connect the original call to a second call. For you, both calls are now ended.

Main menu Access to the main menu.

Call status List all held and active calls

(e.g. participants in a conference).

Direct call

If this is active, only one number can be dialled.

Switch on

C

¢

T

¢ Security ¢ Direct call

C

Confirm selection.

Enter phone code.

J

When first prompted you define and enter the phone code (4–8 digits).

C

Confirm selection.

Please do not forget this code (page 17)!

Ï

/

J

Select phone number from the Phonebook/

Addressbook or enter it.

C

Confirm.


28 Calling

Apply

§Carola§ To dial the phone number

(e.g. Carola’s phone number), press and hold the right softkey.

Switch off

Press and hold .

#

J

Enter phone code.

C

Confirm input.

Tone sequences (DTMF)

You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists . These entries are transmitted directly as

DTMF codes (control codes).

C

Open the call menu.

Send DTMF

Select.

Using the Phonebook/

Addressbook

Store phone numbers and control codes (DTMF codes) in the Phonebook/Addressbook in the same way as a normal entry.

Enter phone number.

J

0

J

0

Press until a “+” appears in the display (wait for the connection to be established).

Enter DTMF codes

(numbers).

If necessary, wait again for three seconds at a time for the receiver to process the entries safely.

Enter a name.

J

§Save§ Store entry.

You may also store just the

DTMFcodes (numbers) and then send them during the call.


My items 29

My items

Set your phone as you wish for the following items:

Ringtones (p. 80)

Assign individual ringtones to caller groups or special dates.

Pictures (p. 121)

Assign individual pictures or photos to your Addressbook entries.

Animations (p. 79)

Choose a start up and shut down animation as well as a personal greeting.

Themes (p. 77)

Load a completely new visual presentation onto your phone.

Screensaver (p. 78)

Choose an analogue or digital clock, or a personal picture.

(Operator) Logo (p. 78)

Choose an individual picture (to be displayed in standby mode)

Wallpaper (p. 78)

Choose your own permanent background image.

Colour skin (p. 78)

Select a colour skin for the user interface.

Applications (p. 73)

Download your own applications from the Internet.

Where do I get what?

You can purchase additional ringtones, logos, animations and Java applications from your service provider or directly from Siemens.

Service provider portal

Depending on your service provider, you will find direct access to his portal on your telephone via menu items or bookmarks. Please contact your service provider for more information on these services.

Siemens Mobile Portal

You will find additional ringtones, logos, animations and screensavers as well as more applications, games and services on the Internet at: www.siemens.com/mobilephones or you can download them directly from the Internet: wap.siemens.com

You will also find a service for saving data here as well as a list of the countries in which these services are available.

My menu

Create your own menu (p. 98) with

frequently used functions, phone numbers or Internet pages.


30 Default book

Default book

C

¢

L

¢ Select function.

Show entries

The entries in the default book

(Addressbook or Phonebook) are shown.

J

/

I

Select a name with the first letter and/or scroll.

New entry

Create new entry.

Addressbook

(see also page 31)

Phonebook

(see also page 35)

Default book

You can set which directory you prefer to use.

The selected default book is opened in standby mode with the joystick.

H

Open Phonebook or

Addressbook

Addressbook

A lot of data can be saved in the

Addressbook for each entry and additional functions (e.g., Birthday: ,

Picture: , Inst. message ) can be used.

Phonebook

The Phonebook is located on the SIM card. Only one phone number can be entered per entry. The Phonebook on the SIM card can easily be transferred into a different phone.

Business card

Create your own business card to send to a different GSM-phone. If no business card has been created yet, you will be asked for your input.

H

§Save§

Move from field to field to enter your details.

Press.


The content of the business card corresponds to international standards (vCard).

Ï

Copy numbers from Addressbook/Phonebook.

Groups

See page 34.

<Info numbers>

See page 37.


Addressbook 31

Addressbook

The Addressbook can store up to

1,000 entries, each with a variety of phone and fax numbers as well as additional address details. These entries are managed in the phone memory separately from those in the Phonebook. However, you can exchange data between the

Addressbook and the Phonebook on the SIM card.

New entry

The Addressbook is set as standard:

H

Open Addressbook

(in standby mode).

Display input fields.

C

I

Select required input fields.

J

Fill in input fields. The maximum number of characters available is shown at the top of the display.

At least one name must be entered. Always enter phone number with dialling code.

Possible input fields

Last name:

First name:

URL:

Inst. message >>

Phone number: Group:

Phone no./office: Company:

Phone no./mobile: Address: >>

Fax: Birthday: >>

Fax 2:

E-mail:

Picture:

E-mail 2: All fields


Group: Allocation to a group

(page 34).

Address: Extension to enter the complete address:

Street: , Post code: , City: ,

Country:

Com. services

Information if the entry is being used as an Inst. Mes-

sage contact (page 62) or

for push to talk:

Nickname: , Push to talk ID:,

Push to talk type:, WV user

ID: , ICQ number: , AIM screen name:


32 Addressbook

Birthday: After activation, the date of birth is entered.

Reminder : The phone reminds you at the time you set one day before the birthday.

Picture: Assign a picture to the entry. This is displayed when you are called by a corresponding phone number.

All fields / Reduced fields

Displays the number of input fields.

§Save§ Save the entry.


Î

Temporary switch to

Phonebook.

Synchronisation

With the mobile phone manager (page 123)

you can synchronise your Addressbook with Outlook ® , Lotus Notes™ and other

Siemens phones.

Using Remote syncr.

you can synchronise your mobile with an organiser stored on the

Internet (see also page 118).

Display/find entry

H

J

/

I

Open Addressbook

(in standby mode).


C

Display.

Display options

§Options§ The options menu only ever offers the functions for the currently selected input field.

Move to ...

Assign current entry or highlighted entries to a group.

View Display an assigned picture.

Copy to SIM Copy name and one phone number to the SIM card

(Phonebook).

New SMS,

New MMS,

New e-mail

Browser

Create a message with the selected entry.

Start browser and visit

URL.

Inst.

Message

Start a dialogue with the

selected entry (page 62).

(For standard functions see page 15)


Change entry

H

Open Addressbook

(in standby mode).

Select required entry.

I

§Edit§

I

§Edit§

Press.

Select input field.

Open entry.

J

§Save§

Make changes.

Save.

Call entry

H

Open Addressbook

(in standby mode).

J

/

I


The number is dialled.

A

If there are several numbers in the

Addressbook entry, these are offered for selection.

I

Select phone number.

The number is dialled.

A

Addressbook

Addressbook options

Depending on the actual situation, different functions will be offered.

These functions can be applied to the entry currently selected as well as to multiple selected entries:


Move to ...

Assign current or highlighted entries to a group.

Copy to SIM Copy name and phone number to the SIM card

(Phonebook).

Filter Only those entries which match the filter criteria are displayed.

Import Set up readiness to receive for a Phonebook entry via

IrDA (page 87) or SMS

(page 44).

Search Enter search term.


33


34 Addressbook

Groups

Nine groups are specified in your phone to enable you to arrange your

Addressbook entries clearly. You can rename seven groups.

H

Open Addressbook

(in standby mode).

<Groups> Select (the number of entries is listed after the group name).

I

Select group.

C

List entries in the group for viewing and editing.

Groups menu


Rename Change name of group.

Group symbol

Assign a symbol to a group.

The symbol will then appear in the display when one of the group members calls.

Ringtone for group

Assign a ringtone to a group that plays when one of its members calls you.

C

¢

T

¢

Ringtones

¢

Group calls

Select group.

I

C

Confirm. If a ringtone has already been set, it will be played. Otherwise, the ringtone list will be displayed and you can select one.

I

If necessary, select a ringtone.

C

Confirm.


No group : Contains all Addressbook entries that do not belong to a group (name cannot be changed).

Received : Contains Addressbook entries

received by IrDA (page 87), Bluetooth

(page 88) or SMS (page 44) (name cannot

be changed).


Phonebook 35

Phonebook

Entries in the Phonebook (on the

SIM card) are managed separately from those in the Addressbook.

You can, however, exchange data between the Phonebook and the

Addressbook.

New entry

If the Phonebook has been selected as the default book:

H

Open Phonebook

(in standby mode).

<New entry>

Select.

Display input fields.

C

Select input field.

I

J

Fill in input fields. The maximum number of characters available is shown at the top of the display.

Number:

Always enter phone number with dialling code. An entry will not be saved without a phone number.

Name:

Enter first and/or last names.

Group:

Default: No group

Important phone numbers can be put in one group ( VIP ). This group is independent from groups in the

Addressbook.

Location:

Default: SIM

Special SIM cards can save phone numbers in a protected area

( Protected SIM ) (PIN2 required).

Record number:

Each entry is automatically assigned a record number. You can also dial using the record number.

§Save§ Press to store the new entry.


Î

Temporary switch to Addressbook.

§Country§ International

dialling code .................................page 24

Functions concerning Text entry... page 19


36 Phonebook

Call (search for an entry)

H

J

/

I

Open Phonebook.


Phone number is dialled.

A

Call using record no.

A record number is automatically assigned to every new entry in the

Phonebook.

J

#

Enter record number.

Press.

Press.

A

Change entry

I

§Edit§

Select entry in

Phonebook.

Press.

Select desired input field.

I

Make changes.

J

§Save§ Press.

Phonebook options

The following functions are available, depending on the current situation.


Copy into 9 Copy all highlighted entries to the Addressbook.

Copy all to 9 Copy all entries to the

Addressbook.

Delete all The whole Phonebook is deleted (PIN-protected).

Import Set up readiness to receive for a Phonebook

entry via IrDA (page 87)

or SMS (page 44).



<Special books>

H

Open Phonebook

(in standby mode).

<Special books>

Select.

<Own numbers>

Enter “own” phone numbers in

Phonebook (e.g., fax) for information. These numbers can be changed, deleted and also sent as an SMS message.

<VIP numbers>

Display the phone numbers saved in the VIP group.

<SIM phonebook>

Entries stored in the Phonebook on the SIM card can also be used on other GSM phones.

<Protected SIM>

b

On special SIM cards, phone numbers can be stored in a protected location. PIN2 is required for editing.

Phonebook 37

<Service nos.>/<Info numbers>

There might be phone numbers saved in your Phonebook that have been provided by your service provider. They may be used to call local or national information services or to use services offered by your service provider.

Completing phone numbers in the

Phonebook

Digits may be replaced by a “?” when phone numbers are entered in the

Phonebook:

Press and hold .

#

These wildcards must be replaced with numbers before dialling (e.g., with the extension numbers in a phone system).

To make a call, select the phone number from the Phonebook.

A

J

Press.

Replace “?” with numbers.

The phone number is dialled.

A


38 Call records

Call records

The phone number of a caller is displayed if

• the caller has switched off the

Hide ID function and

• the network supports the

“Caller Identity” function.

Alternatively, a caller’s name is displayed if it is stored in the Phonebook/Addressbook.

Your phone stores the phone numbers of calls for convenient redialling.

C

¢

P

Select record.

I

C

Open call record.

Select phone number.

I

Dial phone number.

A

Or

§View§ Display information on the phone number.

Up to 500 entries are stored in the records.

Calls missed b

The phone numbers of calls that you have received but not answered are stored for call back purposes.

Â

Symbol for missed call (in standby mode). Press the softkey beneath the symbol to bring up the Inbox

(page 43).

Calls received

Accepted calls are listed.

Calls dialled

Access to the last numbers you have dialled.

A

Fast access in standby mode.

Delete records

The records are deleted.

Records menu

The records menu can be called up if an entry is highlighted.


Copy into 9 Copy the currently selected phone number into the preferred directory.



Durat/charges

Durat/charges

You can display the charges and duration during a call. You can set a unit limit for outgoing calls.

C

¢

P

¢ Durat/charges

Select:

Last call

All outg. calls

All incom.calls

Remain. units

Charge sett.

Scroll through the display.

I

C

Open item.

§Reset§ Reset the currently selected setting.

Charge sett.

C

Open menu.

Currency

Enter desired currency.

Personal rate

(PIN2 prompt)

Enter the currency as well as the charge per unit and time.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the service provider to define a credit limit or a period after which the phone is barred for outgoing calls.

§Edit§ Press.

Enter PIN2.

J

Account limit

Switch on.

J

§OK§

Enter number of units.

Confirm.

Then confirm the credit or reset the counter. The status display for prepaid cards may vary depending on the service provider.

Auto display

Call duration and charges are displayed automatically.

39


40 Camera

Camera

You can view photos/videos recorded on the integrated camera immediately and

• use the photo as a background image, logo, a start-up/shutdown animation or a screensaver;

• assign the photo to an Addressbook entry;

• send the photo/video via MMS or e-mail;

• save the photo in My stuff

(page 121) or on the


(page 122).

Switch on

C

¢

R

Or a

Pressing the sidekey to start the camera in standby mode.

È

Switch to single image

É

and video recording.

The current (preview) image is displayed. You will see the following in the first line from left to right:

Ù

Brightness

Ú

Zoom factor

Û

×

White balance (page 42)

Flash connected

The number of photos which can still be taken in the selected resolution is displayed in the top right-hand corner of the preview image. This number varies considerably depending on the subject matter and how much storage space is required.

The selected resolution is indicated beneath the preview image or, if video mode has been selected, there is an indication as to how much recording time has already been used and how much time is still available for a video.

è

Camera

ÙÚ

×

É

Premium

î

Options


Photo mode

C

Take a photo.

C

Display the preview image for the next photo.

The photo is saved with a name, the date and the time. To enter the name, see Setup in the options menu.

Settings prior to taking a photo:

F

Set the brightness.

Set the zoom factor.

I

Image resolution

The quality of the image can be set in four stages regardless of the preview image resolution. The highest possible resolution is 1280 × 960 pixels.

To create your own display background, select the Wallpaper resolu-

tion (page 78).

The resolution may decrease depending on the selected digital zoom.

Camera 41

Video mode

The video mode resolution is the same as the preview image resolution. You can set two different resolutions.

Start the video recording.

C

C

End the video recording.

A red dot appears in the top right of the display while the video recording is being made.

§Play§ Plays the video recording.

Flash (accessories)

If the flash is active, this is shown by a symbol in the display. The flash is constantly charged while connected to the phone and switched on. This reduces the stand-by time.

×

This symbol appears when the flash is being charged.

For settings, see options menu.


42 Camera

Camera options

The following functions are available, depending on the current situation.


Settings • Name for recordings

• Image resolution

• Colour mode: normal, sepia, grey tones.

• Storage medium:

My stuff

(page 121) or


(page 122)

Pictures Display list of photos.

Other videos Display list of videos.

Microphone on

Switch microphone on or off.

Use flash Choose between:

Automatic , Off ,

Red eye red.

Self timer The photo is taken approx.

15 seconds after triggering. For the last 5 seconds, you will hear a beep each second.

White balance

Choose between:

Automatic , Indoor ,

Outdoor



Ê

Insufficient memory available.

Start the memory assistant to

delete specific data (page 84).

Alternatively, you can transfer data to the RS MultiMedia-

Card.


Inbox

Inbox

The inbox folder offers immediate access to the messages currently received. This means that you no longer have to look through all inbox folders for the various message types. The entries are marked with a symbol to indicate their type and status. You will find an overview of

the symbols on page 7.

To call up the inbox folder, e.g. if you have received a new SMS:

ç

Press the softkey beneath the symbol.

Or

E

Press in standby mode.

In the inbox folder you will find the following message types:

SMS , MMS , E-mail

System messages

Notification about MMS , Missed alarm ,

Missed appts.

, Calls missed , WAP push ,

Voice message

Data objects

Ringtones , Pictures and Video , calendar entries, Notes and Business card.

C

When you open an entry, the relevant application also starts.

After a set period, entries which have already been read and opened are only displayed in the messagerelated incoming lists (see Setup in the options menu).

Inbox options


Rec. e-mails Select set account and send all e-mails.

Setup If entries have been read, remove them from the Inbox :

Daily , Never ,

Immediately

If Daily has been selected, specify the time.



Where applicable you will receive WAP push messages from special servers.

These may contain information from the service provider or important data such as how to set up a connection profile.

§Accept§ For example, start setting up a connection profile automatically.

43


44 SMS

SMS

You can use your phone to transmit and receive very long messages

(up to 760 characters). They are automatically composed of several

“normal” SMS messages (note higher charges).

Additionally, you can insert pictures and sounds in an SMS.

Write/send

C

¢

M

¢

Create new

¢ SMS text

Enter text.

J You will find information on writing texts with and without T9 in the chapter

“Text entry” (page 19).

The following is displayed in the display line: text entry status, number of SMS required, number of characters still available.

Start sending procedure.

A

Ï

/

J

C

Select phone number from the Phonebook/

Addressbook or enter it.

§Group§ If necessary, select a group.

Confirm. The SMS is transmitted to the service centre to be sent and saved in the Sentbox list.

Text options


Save Save composed text in draft list.

Picture&sound

Add pictures, animations and sounds to message

(see following text).

Insert...

Text module

(page 22),

Bookmarks , From 9

(Addressbook/Phonebook).

Format Font size : Small font ,

Medium font , Large font

Underline

Alignment : Default alignm.

, Left , Centre ,

Right

Mark (highlight text with the joystick)

Delete text Delete the whole text.

Send with...

Select SMS profile so the

SMS can be sent.



Picture&sound

Send pictures and sounds with or without accompanying text.

Remember that these may be pro-

tected (DRM, page 13).

With the text input field open:


I

Select Picture&sound .

The menu contains:

Fix animations

Fix sounds

Own animat.

Own pictures

Own sounds

I

C

Select list.

Confirm. The first entry of the selected section is displayed.

I

Scroll to entry required.

For Fix animations / Fix sounds :

C

The selection is added to the SMS.

SMS 45

For Own animat.

/ Own pictures /

Own sounds :

C

The selection is displayed/ played back.

C

The selection is added to the SMS.

The pictures which have been added are displayed. Sounds are displayed in the form of “wildcards”.

SMS to group

You can send an SMS message as a

“circular” to a recipient group.

A

§Group§


The Addressbook is opened.

<Groups> The list of groups is displayed.

I

C

C

Select group.

Open group and highlight all/individual entries.

Transmission is started after a security prompt.


46 SMS

Read

p

Arrival of a new SMS announced in the display.

Open Inbox

(page 43) with

the softkey beneath it.

C

Reading the SMS.

I

Scroll through message line by line.

ç

SMS

10.05.200419:42

+ 12398765431

SMS text. . .

Reply

ì

Options

Reply

You can answer the SMS that is currently open immediately. The newly added text is placed above the received text.

C

Reply immediately.

Reply options

§Reply§ Open reply menu.

Write message Create a new reply text.

Edit Edit received SMS or add new text.

Answer is YES Add Answer is YES to the SMS.

Answer is NO Add Answer is NO the SMS.

to

Please call back,

Delay, Thank you

Add a standard text as a reply to the SMS.

Read options

§Options§ Open reply menu.

Reply See “Reply options” above.

Picture&sound Save picture/sound contained in the SMS.

Text zoom Enlarge or reduce text display.

Archive Move SMS message to archive.



Lists

All SMS messages are archived in different lists, according to their status.

(For overview of message symbols,

see page 7):

Inbox

C

¢

M

¢ Inbox ¢ SMS

The list of received SMS messages is displayed.

Draft

C

¢

M

¢ Draft ¢ SMS

The list of not yet transmitted SMS messages is displayed.

Unsent

C

¢

M

¢ Unsent ¢ SMS

The list of concatenated SMS messages not yet sent is displayed.

Transmission can be restarted.

Sentbox

C

¢

M

¢

Sent

¢

SMS

The list of sent SMS messages is displayed.

SMS archive

C

¢

M

¢

SMS archive

The list of SMS messages stored in the phone is displayed.

SMS

List options

Different functions are offered depending on the list.


Send

Archive

Send or forward entry.

Send with...

Select an SMS profile for transmission.

Move SMS message to archive.


47


48 SMS

Setting

SMS signature

C

¢

M

¢

Message setup

¢ SMS setup ¢ SMS signature

You can enter a “signature” with up to 16 characters. This signature will then be attached to each SMS except for a §Reply§ and when changes are made to an existing SMS.

SMS profiles

C

¢

M

¢

Message setup

¢ SMS setup ¢ SMS profiles

Up to 5 SMS profiles can be set.

These define the transmission characteristics of an SMS. The pre-setting depends on the SIM card inserted.

Activate profile

I

Select profile.

C

Activate.

Set profile

Select profile.

I

§Edit§ Open to edit the profile.

Service centre

Enter the phone numbers for the service centre as provided by the service provider.

Recipient Enter a standard recipient for the profile.

Message type

Validity period

Status report

=

Direct reply

=

SMS via

GPRS

=

Save aft. send

• Manual : Inquiry for all messages.

• Standard text : Normal SMS message.

• Fax : Transmission via SMS.

• E-mail : Transmission via

SMS.

• New : You may need to obtain the required code number from your service provider.

Period in which the service centre is to try to deliver the message:

Manual , 1 hour , 3 hours ,

6 hours , 1 day , 1 week ,

Maximum *

* Maximum period that the service provider permits.

Receive confirmation of successful/failed transmission of a message. This service may be subject to a charge.

If activated, the reply to your

SMS message is handled via your service centre (for information, please contact your service provider).

Send SMS automatically via

GPRS (page 87).

Sent SMS messages are saved in the Sentbox list.


More information on SMS

SMS status report

If the message cannot be transmitted to the service centre you are offered the chance to repeat the transmission. If this also fails, contact your service provider. The Message sent!

message only indicates transmission to the service centre. This will then attempt to relay the message within a certain period.

See also Validity period

(page 48).

Phone number in SMS

(

Phone numbers displayed

§highlighted§ in the text can be dialled

A

) or saved in the Phonebook/

Addressbook.

SMS 49

Downloading ringtones and logos

You can receive links for downloading ringtones, logos, screensavers, animations and information about applications with an SMS. Please highlight this link and, by pressing the Call key

A

, start the download.

Please check that the dial-in access is

configured (page 90).

Remember that these may be pro-

tected (DRM, page 13).

ã

SIM memory full

If the message symbol flashes the

SIM memory is full. No more SMS messages can be received. You need to delete messages or move them to the RS MultiMediaCard.


50 MMS

MMS

The M ultimedia M essaging S ervice enables you to send texts, pictures/ videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a “slide show”.

Depending on your phone's settings, you will receive either the complete message automatically or notification that an MMS has been saved in the network, giving sender and size details. You may then download it to your phone to read it.

Ask your service provider whether this service is available. You may need to register for this service separately.

Create

C

¢

M

¢ Create new ¢ MMS

An MMS consists of the address header and the content.

An MMS may consists of a series of pages. Each page may contain a text, a picture/video and a sound. Remember that pictures and sounds

may be protected (DRM, page 13).

Write texts with the help of T9

(page 19).

Pictures and videos can be recorded with the integrated camera and/or loaded from My stuff

(page 121)

.

Sounds can be recorded with the sound recorder and/or loaded from

My stuff

(page 121).

First select an object for processing to be added to the first page of the

MMS:

Pictures/videos

Limits on picture size can be set in the user settings.

C

Display picture/video functions:

Insert picture

Open list to select a picture.

Insert video

Open list to select a video.

Camera

Activate the camera to take a photo or record a video for the MMS

(page 40).

R

Also possible.

Open

Display picture.

Delete item

Delete inserted picture/video.

Save picture/Save video

Save picture/video for use later on.

Rights details

Display properties, including any

user right restrictions (page 13).


Sounds

SOUND Select.

C

Display sound functions:

Insert sound

Open list to select a sound.

Record

Activate sound recording to record

sounds (page 114).

Also possible.

m

Open

Play back sound.

Delete item

Delete inserted sound.

Save sound

Save sound to use later on.

Rights details

Display properties, including any

user right restrictions (page 13).

MMS 51

Text

TEXT

C

Select and write the text.

The text functions are dis-

played (see also page 19):

Insert

Choose any of the following for insertion: Text module , Bookmark ,

From 9

Delete text

Delete text on current page.

Save text

Save text on the page as a text module.

T9 input

T9 settings:

T9 preferred , Input language

Mark

Text processing together with Copy and Insert .


52 MMS

Generation options


Send Send MMS.

Preview Play entire MMS on the display.

Picture...

See page 50.

Sound...

See page 51.

Text...

See page 51.

Page...

Msg. details Enter sending parameters

(page 54).

Save as templ.

Save created MMS as a template. See also below.

Layout

Add page : Insert new page after current one.

Delete page : Delete current page.

Page list : Display available pages.

Timing : Enter the lifespan of a page in seconds.

Select one of four possible layouts:

Text above, beneath, beside (on left or right of) picture.

Colour...

Select the colours for:

• Picture backg.

• Text backg.

• Text colour


Templates

C

¢

M

¢

MMS templates

MMS templates are MMS messages that are saved without an address.

They can be sent as new MMS messages or used as part of a new MMS.

A maximum of 10 templates can be saved.

Create templates by writing a new

MMS or using an MMS which you have already received.


Save as templ.


Send

The page(s) of the new MMS is (are) already created and the MMS is displayed.

Open address entry.

A

ç

MMS

Subject:

Greetings from London

To:

+1234567654321 |

Size:

85 KB

Subject: Enter a brief description.

Send to: Enter one or more phone number(s) / e-mail address(es).

Ï

book.

Insert from Address-

Size: Display the size of the current MMS in kilobytes (KB).

Attachments:

Insert attachments.

A

C


The MMS is sent after confirmation.

MMS 53

Expanded address fields

Scroll downwards.

H

F

More: Provide additional address fields.

Cc:

Bcc:

Address(es) of copy recipient(s).

Address(es) of copy recipient(s) who are not visible to the other recipients.

Creation date.

Date:

Use delivery time:

Use specified send time.

If §Yes§ :

Delivery date:

Send date.

Delivery time:

Send time.

Symbols for status information

Priority

Þ

ß

Send report

Contains DRM (page 13)

á


54 MMS

Sending options


Send Send MMS.

Play Play entire MMS on the display.

Edit Display object selection so that object can be changed.

Add recipient

Add recipient from the current address directory.

Delete recip.

Add attachm.

Delete individual recipient.

Add attachment:

• Business card

• Appointments

• Picture

• Video

• Sound

• File

Page list Display MMS pages for viewing and/or changing.

Save as templ.

Save created MMS as a template.


Receive

Depending on the setting (page 56),

an MMS can be received in two ways:

Complete transmission

The complete MMS is sent to your phone. This can take quite a while if the MMS is large.

Shown in the display.

ç

<

Start reception. The MMS is sent.

Preliminary notification

You are notified that an MMS is waiting to be received.


w

<

C

Open the notification.

Display sender/date.

Display the properties of the MMS.

§Receive§ The complete MMS is sent.

§OK§ Display in Inbox .


Read

An MMS has been received in full.

Select the MMS.

I

C

Start automatic playing of the MMS.

Key functions for playback:

E

To the next page.

D

Press briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page.

I

Set volume.

C

/

B

End.

The message details are displayed when the MMS is complete.

Subject: Description of the MMS.

From: Information about the sender.

Size: Size of the MMS in KB.


Scroll downwards.

I

More:

Cc:

Additional input fields.

Copy recipient.

Attachments:

Save attachments.

Date: Date received.

Symbols for status information

(see page 53).

MMS 55

Lists

All MMS messages are saved in four different lists (for overview of mes-

sage symbols, see page 7):

Inbox

C

¢

M

¢

Inbox

¢

MMS

The list of MMS messages and notifications received is displayed. To receive an MMS at a later time, open notification and press §Receive§ .

Draft

C

¢

M

¢

Draft

¢

MMS

The list of stored drafts is displayed.

Unsent

C

¢

M

¢ Unsent ¢ MMS

The list of the MMS messages not yet fully transmitted is displayed.

Sentbox

C

¢

M

¢ Sent ¢ MMS

The list of sent MMS messages is displayed.


56 MMS

List options

Different functions are offered depending on the list/situation.


Play Play MMS on the display.

Edit Display MMS for processing.

View Display MMS for viewing only (write-protected).

Send all Send MMS.

Reply to all Reply to MMS immediately.

Forward Enter recipient(s) for forwarding.

Msg. details Display message parameters.

Receiv.all

MMS

Send all new MMS messages immediately.


Setting

C

¢

M

¢

Message setup

¢ MMS setup

Select function.

Connection profile:

Six MMS profiles can be set (5 in the telephone memory, one on the SIM card). The send properties can be specified in them. In most cases, they have already been set. If necessary, check with your service provider for details.

Activate profile

Select profile.

F

§OK§ Profile is activated.

Set profile

§Change§ Display list of profiles.

Select profile.

I

§Edit§ Press. Make settings.


User settings

Set the MMS dispatch to suit your requirements:

Delivery report:

Request delivery confirmation for sent messages.

Default priority:

Send priority:

Normal , High , Low

Expiry time: Select the period of time in which the service centre is to try to deliver the message:

Manual , 1 hour , 3 hours ,

6 hours , 1 day , 1 week ,

Maximum *

* Maximum period that the service provider permits.

Page duration:

Enter the lifespan of a page in seconds (standard requirement).

Scroll forward in Manual or Automatic mode.

MMS 57

Retrieval:

Creation mode:

Size indication:

=

Receive complete MMS or only notification of arrival.

Automatic

Receive complete MMS immediately.

Auto.homenet

Receive complete MMS immediately in home network.

Manual

Only receive the notification.

Free , Restricted , Warning

May be used to receive a warning message or to limit the size of a message.

Set max. message size and message handling.


58 E-mail

E-mail

Your phone has an e-mail program

(client). You can use it to create and receive e-mails.

Write

C

¢

M

¢

Create new

¢

E-mail

Enter the address details for the e-mail:

To: Enter one or more e-mail address(es).

Ï

Insert from Addressbook/Phonebook.

Subject: Enter e-mail heading

(up to 255 characters).

Text: Enter text.


More: Open additional input fields.

Cc:

Bcc:

Address(es) of copy recipient(s).

Address(es) of copy recipient(s) who are not visible to the other recipients.

Attachments:

Add attachments such as images and sounds.

To send

A

Press.

Options

Different functions are offered depending on the position of the cursor.


Send Send e-mail.

Send later

Save Save e-mail in the Draft list.

Add recipient Add recipient from the current address directory.

Delete line Delete current line.

Insert...

Transfer e-mail into the

Unsent list.

Text module

Bookmark

From 9 insert from the Addressbook/

Phonebook.

Add attachm.

My stuff Open to make a selection. Remember that pictures and sounds may be protect-

ed (DRM, page 13).

Delete text Delete the whole text.

Text input • T9 preferred

• Input language


Receive/read

C

¢

M

¢

Inbox

¢ Select function.

Before an e-mail can be read, it must be retrieved from the server. You have two options:

Retr. e-mail

Only the message header in the

Inbox

(page 43) is sent. You can

then decide if you also want to receive the contents:


Retrieve body .

or if you want to delete the e-mail on the server:


Del. on server .

Send/rec. mail

The set access is selected and all e-mails transferred to the Inbox

(page 43). At the same time, com-

pleted e-mails are transferred from the Unsent list.

E-mail 59

Attachments

Contains the e-mail attachments; these can be saved in My stuff

(page 121).


Save attach.

Lists

All e-mails are saved in different lists depending on their status (for overview of message symbols, see

page 7):

Inbox

C

¢

M

¢ Inbox ¢ E-mail

The list of received e-mails is displayed.

Draft

C

¢

M

¢ Draft ¢ E-mail

The list of e-mails not yet transmitted is displayed.

Unsent

C

¢

M

¢ Unsent ¢ E-mail

The list of e-mails not yet transmitted is displayed.

Sentbox

C

¢

M

¢ Sent ¢ E-mail

The list of transmitted e-mails is displayed.


60 E-mail

List options

Different functions are offered depending on the list.


Retr. e-mail Only transfer the message header into the Inbox

(page 43).

Retrieve body

Retrieve the contents from the server if only the message header was received.

Del. on server

Delete the contents on the server if only the message header was received.


Setting

C

¢

M

¢

Message setup

¢ E-mail setup

Select function.

Accounts

Before using this service you must set the server access and your e-mail parameters. You will receive the necessary data from the service provider.

Select account.

I

Activate access

C

Activate an account that has already been created.

Set access

§Edit§ Start editing. Fill in the data fields as specified by your service provider.

General sett.

Enter an e-mail address to which a

Bcc (blind carbon copy) is always sent.


Voice message/mailbox 61

Voice message/mailbox

C

¢

M

¢ Message setup

¢

Voice message

Most service providers provide a mailbox in which a caller can leave a voice mail for you

• if your phone is switched off or not ready to receive,

• if you do not want to answer,

• if you are making a phone call

(and if Call waiting

(page 82) is not

activated).

If the voice mail service is not part of your service provider's standard package, you will need to register, and possibly adjust the settings manually. The following sequence may vary from service provider to service provider.

Setup

The service provider supplies you with two phone numbers: b

Save mailbox number

You call this phone number to listen to the voice mails left for you.

C

¢

M

¢

Message setup

Ï

¢ Voice message

/

J

Select number from

Phonebook/Addressbook or enter/change it.

§OK§ Confirm.

Save call divert number

Calls are diverted to this phone number.

C

¢

T

¢ Call setup ¢ Divert

¢ e.g.

Unanswered

¢

Set

Enter phone number.

J

Or

§Mailbox§ Press to divert call to the mailbox number.

§OK§ Registration with the network is confirmed a few seconds later.

Listen to message

b

A new voice message can be announced as follows, depending on the service provider:

À

Symbol plus beep.

Or

ç

Notification via SMS.

Or

You receive a call with an automatic announcement.

Call your mailbox and play the message(s) back.

1

Press and hold (if necessary enter mailbox number once). Confirm with §OK§ and §Mailbox§ depending on your service provider.


62 Inst. message

Inst. message

b

With Inst. message you can transfer text, audio clips, pictures and files straight to and from one or more terminals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this.

Your dialogue partners are entered in contact lists. When a connection has been established, these lists show who is available, whether he/ she wants to be disturbed and what mood he/she is in at present.

GPRS must be switched on.

C

¢

M

¢

Inst. message

Start menu

Login Select the access through which the dialogue is to take place or select Account

(page 67).

Msg. history

Read the messages from the last session.

Setup Settings for your representation, the applications and servers.

Quit End application.

Fast access ...

Select account (page 67)

C

¢

M

¢

Inst. message

¢ Login

The current contact list or the overview is displayed (if necessary, set

account first, page 67).

Specify your own status

(page 68)


My settings

Select and make entries.

Return to contact list.

B

Enter new contact


Manage Press, then:

Add contact select and enter at least the user ID.

Return to contact list.

B

Hold dialogue with new contact

(page 66)

Select the contact.

I

C

Start dialogue.

C

Open editor.

J

C

Write text.

Send text ...

... and so on.


Login

C

¢

M

¢

Inst. message

¢ Login

Select the last account used (see also

Automatic login:

page 68).

Contact lists

When the connection has been established, the contact list or the overview of the contact lists is shown for selection.

In the contact list, you will find a list of the most recently used contacts.

The first time you log in, an “empty” contact list will be generated by the server if necessary.

Displays in the list:

-Conversation

Displays online contacts for whom there are messages.

-Online

Online contacts with whom no conversations are being held at present.

-Group

Groups for Inst. Messaging with several contacts.

b

-Offline

Contacts who are not online at present.

Inst. message

Manage contacts

Select a contact.

I


Manage Select.

Contacts

Different functions are offered depending on the selection:

Add contact User ID:

Enter an unambiguous user (login) name.

Nickname:

Enter your own nickname for the contact.

Friend:

The contact receives the status Friend: and access to personal infor-

mation (page 68).

Search contact

Search for contact.

Delete contact Delete contact from the list.

Block contact No more messages are received from the contact and the contact receives no status information from you. This function works for all your lists.

63



Manage groups

I b

Select one of the groups you set up yourself.


Manage Select.

Manage group

Different functions are offered depending on the selection:

Add member Add a new group member, see also Add contact .

Search memb.

Invite

Search for group member.

Invitation to the contacts in your own group to Inst.

Message.

Delete member

Delete contact from the group member list.

Add group Add new group.

Search group

Search for group on the server (also groups no longer managed in the list).

Create group Group ID:

Enter an unambiguous group name.

Name:

Name of group.

Topic:

Topic of group.

Searchable:

Other people can look for the group.

Welcome note:

Enter own greeting.

Delete group Delete group.


Create a new contact list

The current contact list is displayed.


Contact lists

Available contact lists are displayed.


Create Select.

Contact list ID:

Give the contact list an unambiguous name.

Name: Allocate self-explanatory name.

C

Confirm.

Inst. message 65

Contact list options


Details

=

Additional information about the contact or the group.

My settings Information on your current personal status

(page 68).

Manage Functions for managing a contact or a group.

Contact lists Display contact lists for selection.

Block listtp Display all blocked contacts. Can be unblocked.

Appl. settings Set the application

(page 68).

Suspend End the application; the server remains connected.

Logout Log off from the server and return to start menu.

Help Display help text.



Start Inst. message

A contact list must be displayed.

I

Select a contact or a group.

C

Start communication with the contact.

The page with the Inst. message is displayed.

When a group is engaged in a dialogue, the name of the sender is placed in front of each contribution.

C

Open editor.

J

C

Write text.

Send text. The text appears in the Inst. message soon afterwards.

Naturally, you can also receive messages from contacts you do not know. This will be pointed out to you in the display, and you can either switch to Inst. Message or ignore/ block the contact.

Options (individual contact)


Send sound

=

Send picture

Send any

=

Details

=

Select and send a melody/ sound from the list (DRM,

page 13).

Select and send a picture from the list (DRM,

page 13).

Send any file.

Clear all

Block contact

Information about the contact, if they authorise this.

Delete all texts in the current Inst. Message.

No more messages are received from the contact and the contact receives no status information from you.

This function works for all your lists.


Options (group contact)


b

Leave group Exit group.

Details Information about the group:

Group ID: , Name: , Topic: ,

Owner:

Clear all Delete all texts in the current Inst. Message.

Receiving objects

b

If sounds or pictures are sent to you during a dialogue, you will be informed of such in the display.

§Receive§ Accept object or

§Reject§ Reject object.

Msg. history

C

¢

M

¢ Inst. message

¢

Msg. history

The messages from the last meeting are displayed. You can read and delete the contributions.

Requirement: The server must be disconnected, see Suspend

(page 65)

and Automatic login:

(page 68).

Inst. message 67

Setting

C

¢

M

¢

Inst. message

¢ Setup ¢ Select function.

Account

The list of available accounts is displayed.

I

/

C

Select an account to establish a connection.

Or

<New entry> / Account sett.

b

Set up an account or change the settings as specified by the service provider. Depending on the service provider, the settings may not be changeable.

Name: Name of account.

URL: Enter URL, e.g.

www.abc.com

User ID: Enter an unambiguous user (login) name.

Password: Enter password (shown as a series of asterisks).



My settings

Information on your current personal status:

Alias: Your own alias under which you can be found on the server.

Screen name:

Name to be displayed in the group.

Mood: Information about your own mood, e.g.

Happy , Sad , Sleepy etc.

Status text: General text information, e.g. “Am at home”.

Availability: Availability:

Available , Busy , Busy

Mobile: Enter the phone number with international dialling code.

§Options§ For each setting, specify who is allowed to view your personal information:

Public

All contacts.

Private

Contacts designated as

Friend:

(page 63).

Hidden

Nobody.

Appl. settings

Settings for the application used:

Automatic login:

Timeout:

Message info:/

Online info:

Auto-reconnect to the last account used.

Time without action after which the application is terminated. However, the server remains connected.

Signal the receipt of messages: Yes / No

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows authorised: Yes / No


CB services

CB services

C

¢

M

¢ Message setup

¢

CB services

Some service providers offer information services (info channels, C ell

B roadcast). If reception is activated, you will receive messages on the activated topics in your Topic list .

CB messages are displayed in standby mode; longer messages are scrolled automatically.

Receive CB

You can activate and deactivate the

CB service. If the CB service is activated, standby time for the phone will be reduced.

Topic list

You can add any topics to this personal list from the topic index. You can preset 10 entries with their channel numbers (ID) and, if applicable, with their names.

New topic Select.

• If no topic index is available, enter a topic with its channel number and confirm with §OK§ .

• If the topic index has already been transmitted, select a topic and activate it with §Options§ .

Topic Select

§Options§ Open list menu.

If a topic is selected in the list you can view it, activate/ deactivate it, edit it or delete it.

CB languages

Receive Cell Broadcast messages in only one specific language or in all languages.

Displays

Ö

,

Õ p q

Topic activated/deactivated.

New messages received on the topic.

Messages already read.

Text zoom

You can set three fixed sizes for the presentation of the display texts across the entire message range:

Standard Medium font size

Zoom + Large font

Zoom Small font

69


70 Surf & fun

Surf & fun

Obtain the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service provider.

Access to the service provider

Direct call-up of the browser with the URL from your service provider.

Internet

C

¢

O

¢

Internet

The browser is activated with the pre-set option as soon as you call up the function (

Browser settings

,

page 71; may be specified/pre-

assigned by service provider).

Browser menu


Homepage Call up the pre-set homepage for the current profile.

Bookmarks List bookmarks

Display list of bookmarks stored in the phone.

Bookmark site

The current page is saved as a bookmark.

Go to...

Enter URL to dial an Internet address directly, e.g.

wap.siemens.com

Reload Reload current page.

Show URL Display the URL of the page currently loaded for sending via SMS/MME/ e-mail.

History Display most recently visited Internet sites.

Disconnect Disconnect the Internet.

File Save object on the current page or save the complete page; display saved pages.

Setup Set or reset browser

(page 71).

Exit browser Close the browser.


End connection

B

Press hold to clear down the connection and close the browser.

Navigation in the browser

C

• Select a link.

• Settings, status on/off.

B

• Press briefly : one page back.

I

• One input field/link forward/back.

• Scroll one line.

Display symbols in the browser

(selection)

²

Connect

±

Network

´

No network

³

GPRS online

Surf & fun

Browser settings

C

¢

O

¢

Internet


Setup

Browser

Profiles

Protocol parameters

Security

Context

Select.

Set start option as well as handling of pictures and sounds plus send options.

The list of profiles is displayed for activation/setting.

For more information, contact your service provider.

Set protocol parameters, push messages and abort time as well as handling of cookies.

Set encryption.

Reset session; delete cache, history and cookies.

71

Enter special characters

*

0

Table of special characters

(page 19).

List of special characters, depending on the situation.

Your Internet browser is licensed by:


72 Surf & fun

Profiles

Preparation of the phone for Internet access depends on the service provider concerned:

Profil pre-set

In most cases, access profiles have already been created for one or more service provider(s).

I

Select profile.

C

Activate profile.

Set profile manually

If necessary, please contact your service provider.


Edit

Delete

Start processing. For the

Internet-specific settings below, please contact your service provider.

Delete selected profile.

Bookmarks

C

¢

O

¢

Bookmarks

Display URL/call up page

List bookmarks

Display list of bookmarks stored in the phone.

Select bookmark.

I

C

Call up URL.

Save

Bookmark site

The current page is saved in the phone as a bookmark.

Bookmark options


Here you will find functions for changing and managing bookmarks and their folders. This includes editing individual entries with the corresponding URLs as well as deleting and moving them to other folders.


Surf & fun

Games and Applications

Games and applications are offered on the Internet. Once downloaded, you can access these via the phone.

Most applications include instructions. Some applications and games are already pre-installed on your phone. You will find these described under www.siemens.com/m75

Requirements

Browser profile (page 71) and access

(page 90) must be configured

already.

Download

Select the correct access depending on whether you are loading games or applications:

C

¢

O

¢

Games or

C

¢

O

¢ Applications

Load or start games, or else start applications or reload them with

Download-Assistant .

Surf & fun 73

Description file only

Ì

The description file is loaded for information purposes only. The application/game itself must be loaded separately. or complete download

Ë

The application/game is completely loaded.

Apply

Remember that applications/games


Í

The executable application is saved on the phone and can be started immediately.

Downl. assist.

C

¢

O

¢

Downl. assist.

You will not be left on your own during the download!


74 Surf & fun

Games&More options

Processing and managing your applications and folders:

Move Move applications between folders.

New folder Create and name new folder.

Update Reinstall an application

(update).

Security Select a security level.

Reinstall Repeat after transmission error.

Attributes Show details of the application/folder (name, version, size, path, producer, date).

HTTP profile

Display profile list for activation/setting



You can use the browser to download applications (e.g. ringtones, games, pictures, animations) from the Internet.

Siemens excludes all warranty and liability claims in respect of or in connection with any applications subsequently installed by the customer and any software not included in the original delivery package. This also applies to functions enabled subsequently at the customer's instigation. The purchaser bears sole risk for the loss of, damage to, and any defects arising in, this device or the applications and for any direct damage or consequential damage of whatever nature resulting from the use of this application. For technical reasons, such applications and subsequent enabling of certain functions are lost in the event of the device being replaced/re-supplied and may be lost if it is repaired. In such cases, the buyer is required to download or enable the application again.

Please ensure that your phone has Digital Rights

Management (DRM) so that downloaded applications are protected from unauthorised reproduction. These applications are then exclusively intended for your phone and cannot be transferred from this even to create a backup.

Siemens offers no warranty or guarantee nor does it accept any liability for the customer's ability to download or enable applications again or to do so free of charge. We recommend that you carry out a backup from time to time of the applications on your Windows® PC using the “Mobile

Phone Manager” ( www.siemens.com/m75 ),

page 123.


Setup 75

Setup

Profiles

C

¢

T

¢

Profiles

Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surrounding level of noise.

• Six standard profiles are provided with default settings. They can be changed however:

Normal environment

Quiet environment

Noisy environment

Car Kit

Headset

Mob.music set

• You can set two personal profiles

( <Name> ).

• The special profile Aircraft mode is fixed and cannot be changed.

Switch on

I

Select default profile or personal profile.

C

Switch on profile.

Profile settings

Edit a default profile or create a new personal profile:

Select profile.

I


Change sett.

Select.

The list of available functions is displayed.

When you have finished setting a function, return to the profile menu where you can change a further setting.


Call up the list in standby mode:

G

The profile list is displayed.

The active profile is identified with

·

.


76 Setup

Profile options


Activate Activate selected profile.

Change sett.

Change profile settings.

Copy from Copy settings from another profile.

Rename Change personal profile

(except default profiles).

Car Kit

If an original Siemens car kit is used, the profile is switched on automatically when the phone is inserted into

the cradle (see also page 133).

Headset

The profile is only switched on automatically if an original Siemens

headset is used (see also page 132).

Aircraft mode

All alarms (appointments, alarm clock) are deactivated. This profile cannot be modified.

Switch on

Scroll to Aircraft mode .

H

C

Confirm selection.

C

Confirm safety inquiry again in order to activate the profile. The phone switches itself off automatically.

Normal mode

When you switch on your phone again, the previously set profile will be reactivated automatically.


Setup 77

Setup

Themes

C

¢

T

¢

Themes

Load a completely new visual presentation onto your phone. At the press of a key various functions are re-organised on a theme basis, e.g.:

Start up/shut down animation, wallpaper, screensaver, start up/shutdown melody, additional animations.

Theme files are compressed to save memory space. After being downloaded or called up from My stuff , these are automatically unzipped when activated.

Activating a new theme

Select theme.

I

Display theme preview.

C

C

Activate new theme.


Setup

78 Setup

Display setup

C

¢

T

¢

Display setup

¢ Select function.

Language

Set the language for the display text.

When “automatic” is set, the language of your home service provider is used.

If a language that you do not understand happens to be set, the phone can be reset to the language of your home service provider with the following input (in standby mode):

* # 0 0 0 0 #

A

Text input

T9 preferred

Activate/deactivate intelligent text entry.

Input language

Select language for text entry. Languages with T9 support are marked with the T9 symbol.

Wallpaper

Set wallpaper graphic for the display.

Logo

Choose graphic to be displayed instead of the provider logo.

Colour skin

Select colour skin, incl. background image for the entire user interface.

Screensaver

After a specifiable time, the screensaver shows a picture in the display.

An incoming call and/or pressing any key will end the function except if the code protection is activated.

Change settings:

§Change§ Settings are displayed:

Preview

Display the screensaver.

Style:

Select Analogue clock , Digital clock ,

Bitmap , Energy saving

Picture:

Select image in My stuff .


Timeout:

Set period after which the screensaver starts.

Code protection:

The phone code is requested to close the screensaver.

Auto key lock:

Automatic keypad locking if no key has been pressed for one minute in standby mode.

Unlocking :

Press and hold .

#

Note

The animated Bitmap screensaver and the

Digital clock considerably reduce the phone’s standby time.

Start up anim.

Select animation to be shown when phone is switched on.

Shutdn anim.

Select animation to be shown when phone is switched off.

Setup 79

Own greeting

Enter greeting to be displayed instead of animation when phone is switched on.

Big letters

You can choose between two font sizes for the display.

Illumination

Set display illumination to brighter/ darker. The darker the setting the longer the standby time.

I

Press the joystick repeatedly at the top/bottom to adjust up or down.


Setup

80 Setup

Ringtones

C

¢

T

¢

Ringtones

¢ Select function.

Set the signal tones on the phone to suit your requirements.

Ringer setting

On/off

Beep

Activate/deactivate all tones.

Reduce ringtone to a short signal (beep).

Silent alert

To avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alternative. The silent alert can also be activated in addition to the ringtone

(e.g. in noisy environments). This function is deactivated when the battery is being charged and accessories are connected (except the headset).

C

I

Settings are displayed for changing.

Select from several silent alert versions.

C

Confirm setting.

Volume

Set different volumes for types of call/functions.

C

Settings are displayed for changing.

I

Select

Calls

Push to talk

Messages

CB services

Alarm clock

Organiser

System

Applications

§OK§

I

The ringtone sounds again.

Set volume.

Confirm setting.

C


Please make sure you have accepted the call before holding the phone to your ear.

This will avoid damage to your hearing from loud ringtones.


Setup 81

Assign ringtone

A ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection.

d Calls

Assign a single ringtone to all phone numbers in the Addressbook.

Group calls

Assign a different ringtone to each group.

Other calls

Assign one ringtone to the remaining calls.

Push to talk

Assign one ringtone to Push to talk calls.

More melodies

Assign further ringtones for:

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

or record new with:

Sound recorder

(page 114)

You will find a list of all supported formats for ringtones in My stuff

(page 122).


Setup

82 Setup

Call setup

C

¢

T

¢

Call setup

¢ Select function.

Hide ID

b

When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers).

To suppress this display, you can enable the “Hide ID” mode for all subsequent calls or just for the next call.

You may need to register separately with your service provider for these functions.

Call waiting

b

If you are registered for this service, you can check whether it is set and you can activate/deactivate it.

Divert

You can specify the conditions under which calls should be diverted to your mailbox or other numbers.

Status check

You can check the current divert status for all conditions. After a short pause, the current situation is transmitted by the network and displayed.

Ö

Õ

Condition set.

Not set.

Ô

Display if status is unknown (e.g. with a new

SIM card).

Clear all

All set diversions are cleared.

b

Set up call divert (example)

The most common condition for call divert is, for example:

Unanswered

I b

Select Unanswered .

(Includes the conditions

Not reachable , No reply ,

Busy , see below.)

C

Confirm.

Set Select.

C

Confirm.

Ï

/

J

§OK§

Select or enter the phone number to which the calls are to be diverted.

§Mailbox§ Use existing mailbox phone numbers, or enter them if necessary.

Confirm. After a short pause, the setting is confirmed by the network.


All calls

All calls are diverted.

Ç b

Symbol in the top line of the display in standby mode.

Not reachable

Divert occurs if phone is switched off or is out of range.

No reply

A call is only diverted after a delay that is determined by the network.

The period can be set to a maximum of 30 seconds in 5-second intervals.

Busy

Divert occurs if a call is in progress.

If Call waiting

is activated (page 24),

you will hear the call waiting tone

during a call (page 26).

Receiving fax b

Fax calls are diverted to a number with a fax connection.

Receiving data

Data calls are diverted to a phone number with a PC connection. b


Note that the divert is stored in the network and not in the phone (e.g. when the SIM card is changed).

Reactivate divert

The last divert has been stored. Proceed as with “Set divert”. The stored phone number is displayed. Confirm number.

Setup 83

Call screening

b

Only calls from phone numbers that are in the Phonebook/Addressbook or assigned to a group are signalled.

Other calls are only displayed.

Any key answ.

Incoming calls can be accepted by pressing any key (except for

B

).

Minute beep

During the call, you will hear a beep after each minute as a reminder of the time elapsed. The person you are talking to does not hear this beep.


Setup

84 Setup

Phone setup

C

¢

T

¢

Phone setup

¢ Select function.

Key tones

Set the type of acoustic key acknowledgement.

Info tones

Set service and alarm tones:

On/off Activate/deactivate tones.

Extended If switched on, a wider range of service tones is available, e.g. end of menu reached, network connection interrupted.

Auto off

The phone switches off each day at the set time.

Activate

§Time§

J

Press.

Enter time

(24-hour clock).

Confirm.

§OK§

Deactivate

§Manual§ Press.

§OK§ Confirm.

Phone identity

The phone identity number (IMEI) is displayed. This information may be useful for customer service.

Device check

After the last information page, a self-test as well as individual tests are offered. If you select Selftest , all individual test are carried out.

Software version

Display the software version for your phone in standby mode:

* # 0 6 # , then press §More§ .

Memory assis.

The memory assistant will help you if there is insufficient phone memory.

If required it can also be started automatically from applications.

After their capacities have been checked, all files and folders are displayed along with their size and may be viewed/opened and, if necessary, deleted.


File system

Format

(Phone-code protected)

The telephone memory is formatted and all saved data such as ringtones, pictures, games, etc. is deleted.

Formatting may take longer than one minute.

Clean up

Create more memory by deleting temporary files no longer required.

Format card

All saved data on the RS MultiMedia-

Card are deleted.

Eject card

Allows the RS MultiMediaCard to be removed without loss of data.

Setup 85

Master reset

The phone is reset to default values

(factory setting). This does not affect the SIM card or the network settings.

Alternatively, in standby mode enter:

* # 9 9 9 9 #

A


Setup

86 Setup

Clock

C

¢

T

¢

Clock

¢ Select function.

Time/date

The clock must be set correctly once, at start-up.

§Change§ Press.

J

First enter the date (day/ month/year), then the time (hours/minutes/ seconds).


If the battery is removed for longer than

30 seconds, the clock must be reset.

Time zones

The time zone can be selected in the world map or a city list:

World map

F

Select the desired time zone.

City list

I

Select a city in the selected time zone.


Set Set time zone.

Auto time zone

=

Have the time zone automatically set by the network.

Search city Search for a city.

Help Operating instructions.

Date format

Select the display format for the date.

Time format

Select 24h or 12h .

Buddhist year

Switch to the Buddhist year (not on all phone models).

Show clock

Activate/deactivate time display in standby mode.

Auto time

The timezone is identified automatically.

b


Setup

Connectivity

C

¢

T

¢

Connectivity

¢ Select function.

GPRS

b

( G eneral P acket R adio S ervice)

C

Switch GPRS on/off.

GPRS is a method for transmitting data faster in the mobile network.

Use GPRS and if the network has sufficient capacity, you can be connected to the Internet permanently. The network provider charges only for the volume of data transmitted.

Some service providers do not yet support this service.

Shown in the display:

£

Activated and available.

¢

Registered.

¤

Temporarily interrupted.

GPRS info

Display the transmitted volume.

Setup 87

IrDA

C

Activate/deactivate IrDA.

Your phone has an infrared interface. With this interface, you can exchange data such as pictures, ringtones, Addressbook entries, business cards or organiser data with other devices which also have an infrared interface.

The infrared interface is on the left side of the phone. The distance between the two devices must not exceed 30 cm. The infrared windows in both appliances must be aligned as accurately as possible with each other.

Shown in the display:

¯

IrDA activated.

®

During transmission.

If IrDA is activated, standby time for the phone will be reduced.


88 Setup

Bluetooth

®

(BT)

Bluetooth is a short-range radio connection by means of which a headset or car kit, for example, can be connected without the need for wires.

Using the Send/print function in the options menu for the application concerned you can also use this route to send data.

With SAP (SIM Access Profile) a car phone GSM module can, for example, use the access data from the SIM card on your phone. There is no need to swap the SIM card. It is possible that SAP might not be supported by your service provider.

Each Bluetooth device has its own specific address and can be given a self-explanatory name as an option.

Password protection ensures the security of a Bluetooth connection, as does including the BT partner in a list as a “confidential” device.

To establish a Bluetooth connection between your phone and other

Bluetooth devices you must activate

Bluetooth.

The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Siemens are under license. Other trademarks and trade names are those of their respective owners.

C

Activate/deactivate

Bluetooth.

My BT name : You can give the phone a name when you activate Bluetooth for the first time.

If Bluetooth is activated, IrDA (infrared) is not active and vice versa.

If Bluetooth is activated, standby time for the phone will be reduced.

Bluet'th setup

C

Call up the setting functions (Bluetooth must be activated).

• Search/Search all

Specify which BT devices are to be searched for:

All

Audio

Phone

PC

All BT devices

E.g. headset, car kit

Other BT phones

Personal computer with

BT connection

C

Start search

The number and name of the most recently found BT device are displayed.

C

The search is ended and the first 10 devices found are shown in a list.

§Retry§ Start new search.

Scroll to entry required.

I


C

Dial the device or start the procedure for acceptance as a “confidential” device

(see below).


Details Display the name and address of the BT device.

Trusted dev.

Add the device as confidential to the list of known devices. To do this, enter the password for the other device. The device must first be set to a “confidential mode”.

If the list is full it is not possible to add another device.

To known list

Add to the list of known devices (see below).

To black list Add to the black list

(see below).

Retry Start new search.

• Known devices

To make selection easier, frequent

BT partners can be recorded in the known device list. If entries are

“confidential”, no password query is made.

• Last connect.

List of most recently and/or still connected devices.

• Black list

Attempts to make connections to devices in this list are rejected.

Setup 89

List options

Each list offers different functions.


Mark as audio

If not possible automatically, specify device as an

“audio” device.

Increase prio.

Move entry up the list so that, for example, a specific audio device is used first.

Decrease prio.

To known list

Move entry down the list.

Move entry to the list of known devices.

To black list Move entry to the black list.


• My BT name

The phone is given a name (max.

16 characters) – this is the name the partner sees. If no name is given, the phone uses the non-changeable device address.

• Visib.to others

Set how your phone should respond to other BT devices. This means (if

“visible”) for example that the device address or the BT name of your phone is shown to other BT devices if they request this in order to receive or send data.


90 Setup

• Not visible

Your phone is not “visible” to other

BT devices. Known devices such as

Bluetooth-Headset/Car Kit continue operating.

• Auto mode

Your phone is “visible” to other BT devices for several minutes. You will then be asked if “visibility” should continue.

Shown in the display

Bluetooth activated.

¨

©

Bluetooth visible to others.

Bluetooth during data transfer.

ª

«

Call to Bluetooth device accepted.

Data services

Basic setting and activation of the connection profiles for data transmission such as MMS, WAP .

The phone default setting varies from service provider to service provider:

• The settings have already been implemented by the provider.

You can start immediately.

• Access profiles have already been created by your provider. Then select and activate profile.

• The access profiles must be configured manually.

If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare in the FAQ section.

Select profile

Select the profile.

I

C

Confirm selection.

Set profile

Select the profile.

I


§Edit§

I

§Edit§

Open the selection.

Select CSD settings , and/or

GPRS settings .

Make the settings as specified by your service provider.


HTTP profile


• The settings have already been implemented by the provider.

You can start immediately.


• The access profiles must be configured manually.

If necessary, check with your service provider for details. You will also find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare in the FAQ section.

Make the settings.

I

Authentication

Activate or deactivate encrypted dial-up (CSD connections only) for

Internet access.

Setup 91

Fax/data

Fax/data mode using a PC

With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone.

Fax and data services must be enabled by the service provider. There are variations in fax and data reception, depending on the network.

Please ask your service provider about this.

Send voice/fax b

Set this function on the phone before transmission so that you can switch from voice mode to fax mode.


92 Setup

Rec. voice/fax b

( Only if no special fax or data number is available)

Start the required communication program on your PC and activate the function on the phone during the call (the PC will take over the connection).

End transmission

End transmission with PC software and/or press .

B

Rec. fax/data b

Your service provider has given you a number for telephoning and a fax/ data number.

The call is signalled by a special ringtone and the type of call (fax or data) is displayed. Now start the communication program on your PC to receive the fax/data.


Setup

Security

C

¢

T

¢

Security

¢ Select function.

Auto key lock

The keypad is locked automatically if no key has been pressed for one minute in standby mode. This prevents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.


The keypad can also be directly locked and unlocked in standby mode.

In each case:

Press and hold.

#

Direct call


Only one phone number can be

dialled (see also page 27).

Setup 93

Only

‚ b

(PIN2 or phone-code protected)

Dialling options are restricted to SIMprotected phone numbers in the

Phonebook. If only area codes are entered, relevant phone numbers can be added to these manually before dialling.

If the SIM card does not support PIN2 input, the whole Phonebook can be protected with the phone code.

PIN codes

For description, see page 17:

PIN control , Change PIN , Change PIN2 ,

Chg.phonecode

This SIM only

b


The phone can be connected to a

SIM card once the phone code is entered. Unless the phone code is known the phone will not operate with a different SIM card.

If the phone is to be used with a different SIM card, enter the phone code when requested.


94 Setup

Barrings

b

Barring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit network password for network barring.

Your service provider will give you this password. You may need to be registered separately for each barring.

Outgo. access

All outgoing calls except emergency numbers are barred.

Outgoing intl.

(International outgoing)

Only national calls can be made.

Out.int.x.home

(International outgoing without home country)

International calls are not permitted.

However you can make calls to your home country when abroad.

All incoming

The phone is barred for all incoming calls (forwarding all calls to mailbox provides a similar effect).

When roaming

You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.

Status check

The following information can be displayed after a status check:

Ö

Õ

Ô

Barring set.

Barring not set.

Status unknown

(e. g. new SIM card).

Clear all

All barrings are deleted. A password which the service provider will give you is necessary for this function.


Setup

Network

C

¢

T

¢

Network

¢ Select function.

Line

b

This function is only displayed if it is supported by the service provider.

Two separate phone numbers must be registered on the phone.

Select line

Select the currently used phone number.

\

Display current phone number.

Protected


You may limit usage to one phone number.


Special settings may be made for each phone number (e.g., melody, call divert etc.) To do this, first switch to the required phone number.

Switch from phone number/connection in standby mode:

0

Press.

§Line 1§ Press.

Setup 95

Network info

The list of GSM networks currently available is displayed.

Æ

Indicates non-authorised service providers (depending on SIM card).

Choose netwrk

Network search is restarted. This is useful if you are not on your home network or want to register on a different network. The network list is rebuilt when Auto network is set.

Auto network

Activate/deactivate, see also Choose netwrk above. If “Automatic network” is activated, the next network on the list is dialled in ranking order of your

“preferred networks”. Otherwise a different network can be selected manually from the list of the available GSM networks.

Pref. network

Enter your preferred service providers here for when you leave your home network (e.g. if there are differences in price).


96 Setup

Your service provider is displayed:

§List§ Display list of preferred networks.

Create/change entry:

<Empty> or select an existing entry, then select a new service provider in the list and confirm.

Record new service provider

(last entry in the list):

Furth.network

Select, enter the provider data and save it.


If you are outside your home network, your phone automatically dials another GSM network.

If the signal strength of the preferred network is inadequate when you switch on the phone, the phone may register in a different network. This can change when the telephone is next switched on or if another network is selected manually.

Band selection

b

Select either GSM 900, GSM 1800 or

GSM 1900.

Fast search

When this function is active, network reconnection is speeded up

(standby time is reduced).

User group

b

Depending on the service provider, you can create groups with this service. These can have access to internal (company) information, for example, or special rates apply. Please check with your service provider for details.

Active

Activate/deactivate function. “User group” must be deactivated for normal phone use.

Select group

You can select or add groups other than preferred groups (see below).

Code numbers for the groups are obtained from your service provider.

Outgo. access

In addition to network control for a user group, it is possible to set whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.

Pref. group

If activated, calls may only be made within this standard user group

(depending on the network configuration).


Setup

Accessories

C

¢

T

¢

Accessories

¢ Select function.

Car Kit

Only in combination with an original

Siemens handsfree car kit (see page 133). The car kit profile is acti-

vated automatically when the phone is inserted into the cradle.

Auto answer

(factory default: off)

Calls are accepted automatically after a few seconds. Eavesdropping is possible!

Shown on the display.

Å

Automatic switch off

(factory default: 2 hours)

The phone is powered by the car's power supply. You can adjust the time between switching off the ignition and the time at which the phone switches off automatically.

Car loudspk.

Improves playback in certain circumstances.

Setup 97

Automatic settings

• Permanent illumination: switched on.

• Key lock: switched off.

• Charging the phone battery.

• Auto. activation of the car kit profile when phone is inserted in the cradle.

Headset

Only in conjunction with an original

Siemens headset (see page 132). If

an original Siemens headset is used the profile is automatically activated when the headset is plugged in.

Auto answer

(factory default: off)

Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep).

You should therefore be wearing the headset.

Automatic setting

Accept call with Call key or PaT key

(Push To Talk), even when the auto key lock is activated.

Auto answer

If you do not notice that your phone has accepted a call, there is the danger that the caller may eavesdrop.


98 My menu

My menu

C

Press.

§My menu§ Press.

Create your own menu with frequently used functions, phone numbers or Internet pages.

The list of 10 entries is preset. You can, however, change it as you wish.

Use

Select the required entry.

I

C

Confirm.

A

Or

If the entry selected is a phone number, you can also dial it with the

Call key.

Change menu

You can replace each entry (1–10) with another entry from the selection list.

Select the required entry.

I

§Change§ The function list is opened for selection.

I

Select the new entry from the list.

C

Confirm. The entry is saved.

If Phonebook is selected, the phone number must also be selected; if Internet is selected, the bookmark must also be selected.

Reset all

(Phone code required)

§Reset all§ Select. After a security prompt, the pre-assignment is reset.


Fast access 99

Fast access

You can assign one important phone number or function to each of the two softkeys and number keys 2 to 9

(speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button.

Z

£


X

01.03.2004

Internet

10:10

ì

Help


The service provider may have already assigned functions to a softkey (e.g. access to “SIM services” or direct call-up of the Internet portal). It may not be possible to modify this key assignment.

The left softkey may sometimes be replaced automatically by p

/ a new message for example.

À

to access

Softkeys

Change

For example, the Internet function is assigned to the softkey. To change this (in standby mode):

§Internet§ Press briefly .

§Change§ Scroll to new assignment in the list.

C

Confirm.

• Special case Phone number . Choose a name from the Phonebook/

Addressbook for assignment to the key.

• Special case Bookmark . Scroll to a URL in the bookmark list for assignment to the key.

Apply

In standby mode:

Application

The “Internet” is just used as an example here.

§Internet§ Press and hold ; the application is started.

Phone number

The assignment “Carola” is used here only as an example.

§Carola§ Press and hold . The phone number is dialled.


100 Fast access

Speed dialling keys

Number keys 2 to 9 can be used as speed dialling numbers for fast access. Number key 1 is reserved for the mailbox phone number

(page 61) and number key 0 is re-

served for switching between two

connections during use (page 95).

Change

In standby mode:

3

Press number key briefly

(e.g. the 3).

§Set§

If this number is still free:

Press.

Select a new function from the list and confirm with §OK§ .

Or

If an assignment has already been made to this key (assignment displayed above the right softkey): e.g. Games.

§Games§ briefly .

§Change§

Scroll to application in the list.

C

Confirm.

• Special case Phone number . Choose a name from the Phonebook/

Addressbook for assignment to the key.

• Special case Bookmark . Scroll to a URL in the bookmark list for assignment to the key.

Apply

Select a stored phone number or start a stored application

(e.g.

Calendar ).

In standby mode:

Press briefly .

3

The assignment of the number key 3 is displayed above the right softkey e.g.:

§Calendar§ Press and hold .

Or simply

Press and hold .

3


Organiser 101

Organiser

Calendar

C

¢

Q

¢

Calendar

You can enter appointments in the calendar. Time and date must be set for the calendar to work correctly.

The calendar offers you three views:

Monthly view

Special colour coding:

Day with entries for appointments, day-long appointments, weekends.

Navigation:

F

One day forward/back.

I

One week forward/back.

C

Daily view open.

Weekly view

Special displays:

Appointments are shown as a horizontal colour bar on the vertical hour division.

Navigation:

F


I

Forward/backward by the hour through the day.

Daily view

Special displays:

Description of appointment.

Navigation:

F


I

To the start/end of the day or next/last entry.

Calendar setup

C

¢

Q

¢

Calendar setup

Start of day:

Time when the working day begins.

Start of week:

Weekday on which the monthly and weekly view on the left starts.

Set weekend

Set the days for the weekend.

Show birthdays:


Synchronising with a PC

With the mobile phone manager (page 123)

you can synchronise appointments, tasks and memos with Outlook ® or Lotus

Notes™.


102 Organiser

Appointments

C

¢

Q

¢

Appointments

Appointments are displayed in chronological order in a list.

Enter new appointment

<New entry>

Select.

Category: c d e f g h

Memo

Text input for description.

Voice memo

Enter voice memo.

Shown with alarm.

Call

Enter phone number to be displayed with the alarm.

Meeting

Text input for description.

Holiday

Enter start and end date.

Birthday

Enter name and date.

Different input/selection fields are displayed depending on the type.

The number of fields can be restricted, see Standard

, page 103.

Description:

Description of nature of appointment.

Phone number:

Enter a phone number or select one from the Addressbook.

Voice memo:

Enter a voice recording, see

Dictat.machine,

page 105.

Location:

Location of appointment.

Whole day:

All-day appointment: Yes/No

Start date:

Date when appointment starts.

Start time:

Time when appointment starts.

End date:

Date when appointment ends.

End time:

Time when appointment ends.


Alarm:

On/off or Silent alert .

J

Enter the period of time before the appointment and select the time unit:

Minutes , Hours , Days

Reoccurrence:

Select a timeframe for repeating the appointment:

No , Daily , Weekly , Monthly , Yearly

Enter a parameter for repeating:

Forever , Until , Occurrences (number)

If Weekly is selected, certain weekdays can be highlighted.

All fields/Reduced fields

In the list, select those fields which are to be offered for future entries.


Display above set alarms:

Alarm clock

¹

»

Appointment

An alarm sounds even when the phone is switched off (except in aircraft mode,

page 76). The phone does not go to stand-

by mode. Press any button to switch the alarm off.

Organiser 103

Information on the alarm

When the set date and time are reached there is an audio and a visual alarm. If an alarm is missed it appears in the list of missed appoint-

ments (page 104).

Alarm type Memo :

Meeting : The text is shown in the display.

Alarm type Call : The phone number is displayed and can be dialled immediately.

Alarm type Birthday : You can send special birthday greetings by SMS,

MMS, e-mail or a call via §Options§ .

Use Snooze to set the alarm to repeat.

Tasks

C

¢

Q

¢ Tasks

A task is displayed like an appointment in the agenda of the selected day. However, unlike an appointment it does not require a time.

When no time is entered the task appears at the top of the list every day until it is marked as completed.

The entries are made in the same way as Appointments (see “Appointments”). Then:


104 Organiser

Status:

Select Done or Outstanding .

Priority:

Select 5 levels from Lowest to Highest .

Date in use:

If activated with Yes , the following time input option is offered.

Due date:/Due time:

Enter the date and time by which the task is to be completed.

Alarm: As for Appointments .

Notes

C

¢

Q

¢ Notes

Write and manage brief text notes.

Enter a new note

<New entry>

Select.

J

Enter text. The first line is displayed as a “title” in the notes list. Total length: max. 160 characters.


Save Save note. When Confidential is selected, a note is protected with the phone code.

Missed appts.

C

¢

Q

¢

Missed appts.

Events with an alarm ( Appointments,

Tasks ) to which you have not reacted are listed for reading.

Organiser options

Depending on the application used

( Calendar , Appointments, Tasks , Notes ) and the current situation, different functions are offered.


Delete Delete entry.

Delete until Delete all entries prior to a certain date.

Delete all Delete all entries after confirmation.

Delete done

Activate/

Deactivate

Filter

Delete all completed tasks.

Switch alarm on/off.

Display all entries with the selected feature.

Confidential

Protect note with phone code. We recommend that you do not store any passwords (PIN, TAN etc.) as notes.



Dictat.machine

C

¢

Q

¢

Dictat.machine

Use the dictating machine to record short voice memos.

• Use your phone as a dictating machine when on the move.

• Record a memo as a reminder or as a note for others.

• Add a voice memo to an appointment in the calendar.

New recording

<Record new>

Select.

The remaining time available, as well as the recording time, are shown in the display.

C

C

A brief beep sounds when the recording starts. Now dictate the text.

Switch between pause/ record.

D

End recording.

The recording is automatically saved with a time stamp.

Rename with §Options§ .

Organiser 105

Playback

I

C

Select the desired recording.

Switch between playback/ pause.

D

/

E

Press and hold for rapid rewind and fast forward.

Dictating machine options


Handsfree Playback through the built-in loudspeaker.



106 Organiser

Time zones

C

¢

Q

¢

Time zones

The time zone can be selected in the world map or a city list:

World map

F

Select the desired time zone.

City list

I

Select a city in the selected time zone.

Time zone options


Set Specify the time zone.

Auto time zone

=

The time zone is switched automatically to local time by the network.

Search city Search for a city.

Help Operating instructions.


Extras 107

Extras

SIM services (optional)

C

¢

S

¢

SIM services

Your service provider may offer special applications such as mobile banking, share prices, etc. via the

SIM card.

If you have such a SIM card, the SIM services will appear in the main menu under “Extras” or directly above the softkey (on the left).

Symbol for SIM services.

U

Where there are several applications, these are displayed in a SIM services menu. With the SIM services menu, your phone can support future additions to your service provider's user package. For further information, please contact your service provider.

Music player

C

¢

S

¢

Music player

With the Music Player, you can play music files, e.g. in AAC format, and group together several tracks as a playlist. Music files and playlists are stored by default in My stuff / Sounds .

Music files can, for example, be downloaded from the Internet or transferred to the telephone via a

PC connection (page 13).

Playing music

You can play music by

• Starting the Music player and selecting a track or a playlist.

• Selecting a music file directly from

My stuff and opening it.

#

Press and hold to lock/ unlock keypad, when a music file is playing.

Displays

Music Player entries appear in the following order:

Folder – Playlists – Music files


108 Extras

New playlist

<New Playlist>

Select.

J

Enter a name for the playlist.

Select the required track.

I

Repeat the process until the playlist is complete.

Music Player options


Different functions are offered depending on the situation.

Shuffle Random playback of tracks in the current directory.

Repeat Repeat tracks in a playlist.

New playlist Create a new playlist.

Add to playlist

Attributes

Add a track to the playlist.

Display information about a track or a playlist.


Push to talk

b

This application can be used to simultaneously connect multiple subscribers. Like a normal Walkie-

Talkie, only one subscriber can speak at a time. The others can only listen until the speaker allows others to talk.

A recipient is selected using their push to talk address (ptt ID) or their phone number. Groups created in

advance (page 111) can be invited

to a session. Your service provider will supply you with your own ptt address.

The recipient can also use a mobile phone, as well as a PC with an Internet connection and headset (depending on service provider).

To use the application, GPRS (page 87)

must be switched on and Push to talk

(page 113) activated.

Preparing a session

From the Addressbook

H

Open Addressbook

(in standby mode).

I b

Select an entry with a push to talk ID

( Com. services ).

The session with the selected subscriber is started. For details of how to invite additional subscrib-

ers, see page 110.


From standby mode

C

¢

S

¢ Push to talk

<New session>

Select.

The possible functions as well as already added subscribers are displayed.

You have several options to combine the subscribers:

<Add from d >

I

Search and mark recipient in Addressbook.

Add recipient.

C

Or

<Add f. sess.>

I

Select a subscriber from an earlier session.

Or

<Enter ptt ID>

Enter ptt ID of a recipient.

J

§Select§ Add entries.

Or

<Add from grp>

I

Select group.

C

Open.

Select and mark recipient.

I

§Select§ Add recipient.

Extras 109

Starting a session

If all the desired subscribers are combined, start the session: b

The subscribers are displayed, and the authorised speaker is shown in bold.

Speaking rights

The list of subscribers is displayed.

The current authorised speaker is shown in bold.

b b

Request speaking rights.

The delegation of speaking rights is displayed and then the requester can talk.

Returning speaking rights.


D epending on the setting for Hold mode

(page 113)

b

must be pressed and held as long as one speaks.

If the person with speaking rights takes a long pause, the speaking rights are automatically released again.


110 Extras

Inviting additional subscribers

You can invite additional subscribers during a session.

§Options§ Open menu, select Invite and mark new subscribers.

You are being invited

The invitation is shown in a window.

You can accept/refuse this invitation.

C

Accept the invitation.

The list of subscribers is displayed.

Leaving the session and ending

Only if you yourself started the session.


Quit session

Select. You will leave and end the current session.

Letting the session run in the background

The current session remains open in the background and you can listen to the calls. A phone call ends the session.

Press and hold .

B

Request speaking rights: b

Press.

View the session again:

C

¢

S

¢

Push to talk

¢ Sessions

Push to talk options


Different functions are offered depending on the situation.

History view Display of subscribers in order of speaking.

Session view Display of subscribers for the current session.

Quit session End session.

Session details

Start time , Status ,

Duration , Type etc.

User details Display subscriber properties (see also

My presence

, page 112).

Add to d Save ptt ID in Addressbook.

Invite user Invite a subscriber to a session.

Add to group Add subscriber to the group.

Clear Delete the list except for the last entry.

Handsfree Switch on handsfree talking (loudspeaker).

Request pres.

Request information about the readiness to receive for a subscriber.

Volume Set volume.

I

is also possible.



Sessions

C

¢

S

¢

Push to talk

¢ Sessions

Display subscriber list for the current session. The authorised speaker is shown in bold.

Records

C

¢

S

¢

Push to talk

¢ Records

Select the list of received and made ptt calls as well as the option to delete all lists.

You can mark subscribers for one session in the list.

b

Start session.

The function Create as group in

§Options§ can be used to combine entries in the list into a new group.

Extras 111

Groups

C

¢

S

¢

Push to talk

¢ Groups

Only your groups are displayed and can be edited.

Setting up a new group

<New entry>

Select.

Fill in input fields:

J

Push to talk ID:

Subscriber ID.

Name:

Type

Group name.

Instant or Chat .

Max. users:

Maximum number of group members

("0" means "no limit").

Membership:

Set if membership in this group is open to everyone

( Open ) or if the subscriber is limited to the member list ( Restricted ).

Memberlist

Add member to the group.

Rejectlist List of subscribers which may not become members of this group.

§Save§ Save group.


112 Extras

<Rejectlist>

List of subscribers with whom a session is not desired. Invitations from this list are always refused automatically.

<Acceptlist>

List of subscribers whose invitation is automatically accepted (see also

Auto answer,

page 112).

Starting a session (group conversation)

I

Select group.

Start session.

b

Viewing group properties

I

Select group.

C

View properties.


Add to d Copy group ID to the

Addressbook.

Edit

Memberlist

Edit (your own) group.

Copy ID to clip Save group ID (ptt ID) in the clipboard.

Display the member list.

Rejectlist Display the refused subscribers.

My presence

C

¢

S

¢

Push to talk

¢ Presence ¢ My presence

The following properties (yours) can be set:

Interruption

Allow, forbid interruption

Mood

Notes

Display your mood.

Note.

Settings

C

¢

S

¢

Push to talk

¢ Settings

Some settings must be made by the user or can be copied from your service provider.

I

Select and confirm the function, area.

Dwnl. settings

Download settings from the server of the service provider.

Ptt online

Log in/out, status information for login.

Block ptt calls

Allow/block push to talk calls.

Auto answer

Automatically accept invitations because of the Acceptlist

(page 112).

Use Acc.& Rej.

Activate/deactivate the use of

Acceptlist / Rejectlist

(page 112/ page 112).


Push to talk

• Ptt enabled

Activate/deactivate push to talk.

• History length:

Number of entries in the list.

• Timeout(min.):

Push to talk is put in the background if not used after an adjustable amount of time.

• Hold mode

Depending on the setting,

b

must be pressed and held to speak.

• Default view

Session view or History view .

• Request pres.

The saved properties are displayed.

Server

Settings for the server. Please check with your service provider.

Advanced

Further settings. Please check with your service provider.

Extras 113

Alarm clock

C

¢

S

¢

Alarm clock

The alarm will ring at the time set by you, even when the phone is switched off.

§Edit§ Press to set.

F

Activate/deactivate the alarm.

H

J

Switch to time setting.

Set alarm call time

(hh:mm).

Switch to week days.

H

F

Navigate to the various days.

C

Display options: alarm call time and days.

é

Alarm clock

¹

§On§

07:30

Mo Tu We Th Fr Sa Su

Edit

ì

OK


114 Extras

C

Set days for alarm calls.

Press again to delete the highlighting.

Press and hold to highlight/unhighlight all the days.

Confirm setting.

§OK§


¹

Screen display in standby mode: alarm clock activated.

Use Snooze to set the alarm to repeat.

Sound recorder

Use the sound recorder to record noises and sounds for use as ringtones. The sound recorder is usually started from other applications/functions such as assigning a ringtone.

New recording

Start from main menu

C

¢

S

¢ Sound recorder or also start from another application:

<Record new>

Select.

The remaining time available, as well as the recording time, are shown in the display.

C

C

D

A brief beep sounds when the recording starts.

Switch between pause/ record.

End recording.

The recording is saved with a timestamp in the

Sounds folder.

Rename with §Options§ .

If starting from another application, e.g. create MMS:

§Insert§ Transfer the recording into the application.

Playback

I

C

Select the desired recording.

Switch between playback/ pause.

D

/

E

Press and hold for rapid rewind and fast forward.


Handsfree Playback through the built-in loudspeaker.

Set as...

Set the recording as a ringtone.



Calculator

C

¢

S

¢

Calculator

The calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrix with the calculation functions) are located in the top half of the display.

J

F

/

I

Enter digit(s).

Navigate functions.

C

Use function.

Enter digit(s).

J

C

Use function. The result is calculated and displayed immediately.

.

±

1/x

%

Basic functions

+, -, *, /

=

Basic calculation types

Result

Reversion

Convert to percentage

Decimal point.

Sign change “+”/“–” x e

§Options§ Expansion of the range of functions:

2 x Square root

Square

Exponent

MS

MR

M+

Save displayed number

Call up saved number

Insert number from memory

Extras 115

Calculator options


Convert Call up the unit converter with the current result.

Clear all Delete all units.

Extended mode/

Basic mode

Convert calculation functions.

Memory save,

Memory recall,

Memory clear

Save or recall result; delete memory.



116 Extras

Unit converter

C

¢

S

¢

Unit converter

You can convert various measurement units into other measurement units.

The following types are offered with various units:

Velocity

Mass

Time

Area

Power

Currency

Energy

Volume

Length

Example for Velocity units:

Pressure

Temperature

Type

Velocity

Units

Kilometres/h , Metres/sec ,

Miles/h , Miles/sec , Knots ,

Mach

Converting the units/currency

F

Select the source unit/ currency.

H

J

H

Switch to the input field.

Enter the quantity to be converted.

Switch to the selection field.

F

Select the target measurement unit/currency.

The result is displayed.

You can use both input fields alternately.

C

Opens the calculator with the current converted value.

Special key functions:

Set decimal point.

*

#

Change sign.

Currency

When you call up the function, you must enter a base currency into which the conversions are to be made.

J

Enter currency

(e.g. euro).

§Save§ Store entry.

Now enter the name and exchange rate of the currency to be converted.


Add currency Enter new currency and exchange rate.

Set as base Use entered currency as base currency.

Edit rate Change the exchange rate of the base currency.

Calc.

Start calculator.



Stopwatch

C

¢

S

¢

Stopwatch

Two intermediate times can be recorded and saved.

Display, also in standby mode.

§Start§ / §Stop§

Save intermediate time.

*

After a stop:

§Reset§ Reset to zero.

Stopwatch options


Stopwatch list

Display saved entries.


Extras 117

Countdown

C

¢

S

¢

Countdown

A set time elapses. The last 3 seconds are indicated by a beep. At the end a special beep sounds.

Display, also in standby mode.

If no time has been entered:

C

Open input window.

J

Set period of time.

Confirm.

C

C

Start countdown.

If a countdown time is specified:

C

Start countdown.

While the time is elapsing:

C

Interrupt counter.

C

Let counter continue running.

§Reset§

§Edit§

Reset counter to starting time.

Enter new period of time and confirm with §OK§ .


118 Extras

Remote synchronisation

C

¢

S

¢

Remote syncr.

You can use this function remotely to access externally filed data (addresses, calendar, etc.) and synchronise these with the data on your phone. The data can, for example, be saved on a company computer or the Internet e.g.: www.siemens-mobile.com/syncml

Synchronise

§Sync§

§Next§

The computer is selected and synchronisation started. When completed, the actions which have been performed are displayed.

Scroll through the various displays.

Sync. setting

The following settings can be made prior to synchronisation:

Active profile

You can choose between 5 profiles.

I

C

§Edit§

Select profile.

Activate profile.

Or

Set profile.

Server sett.

Providers Display the current service provider.

Homepage: e.g. www.siemensmobile.com/syncml

Port: Enter port number e.g. 80.

User name: Enter user name

(login name).

Password: Enter password (shown as a series of asterisks).

Calendar path:, Contacts path:,

Notes path:, Tasks path:

HTTP authentication:

Confirmation required;

Yes / No (if No , the input fields are not visible).

HTTP name: Enter name.

HTTP password:

Enter password.

Last sync:

Time of the last synchronisation.

Sync. mode

• Sync data: Modified data or All data

• Sync direction: Two-way ,

Mobile update or Server update

Sync items:

Highlight database areas to be synchronised:

Calendar, Contacts, Notes, Tasks

Save settings.

C


Device manag.

C

¢

S

¢

Device manag.

If you were informed about software updates by a push message, you can establish a connection to the provider's server using the Device manager, so you can download them.

When downloading is finished, you will be asked to switch the phone off and on again. Afterwards, the software of your phone will be updated.

Please follow the instructions in the display.


• The settings have already been implemented by the provider. You can start immediately.


• The access profiles must be configured manually. If necessary, check with your service provider for details. You will find the current settings for the service provider on the Internet at www.siemens.com/ mobilephonescustomercare under "FAQ".

Extras 119

Active profile

A standard profile for downloading the current software of the operating system is displayed.

§Sync§ Establish a connection to the active profile.

Or

§Edit§ Call up profile list.

Select profile.

I

C

Activate profile.

Or

§Edit§ Set profile.

Last connect.

Display last connection.


120 Media player

Media player

The Media Player is started by the application if you play a media file that has been received by SMS/MMS or downloaded from the Internet.

F

Press briefly to scroll to the next media file.

0

–

9

Switch on display illumination.

Pictures

The following functions can be applied to a displayed picture:

C

Zoom function if the displayed picture has a higher resolution than the display.

F

The joystick moves the picture detail.

#

5

Centre the picture.

Switch to full screen mode and back again.

§Send§ Send via MMS or e-mail, for example.

Melodies/playlists/video

The media playback offers the following functions for music, playlist and video playback:

C

Play or stop, depending on the situation.

I

Set volume.

*

Switch to mute.

§Stop§ Pause function.

End playback.

B

Options


Different functions are offered depending on the starting situation and the object.

Volume Set the volume with the joystick.

Set as...

Set picture as Wallpaper ,

Logo , for example, and sounds, for example, for

Incoming call , Startup melody .

Slideshow Automatic run-through in full screen mode. Change individual picture with joystick.

Edit Access to picture editing.



My stuff 121

My stuff

To organise your files, you can use the file system like a PC file manager.

There are separate folders for the various data types in My stuff . If, for example, you want to download new pictures or sounds, the download function is contained in the relevant folder.

Remember that pictures and sounds


C

¢

N

The list of the folders and files is displayed. The first entry in My stuff is always the RS MultiMediaCard

(page 122).

Navigation

Select file/folder in lists.

I

F

C

/

I

The cursor can be moved as required in the preview.

Open folder and start download or start file with the related application.

My stuff options


Move Place highlighted file(s) or folder in temporary memory.

Copy Place highlighted file(s) or folder in temporary memory.

Paste Transfer content of temporary memory into current folder.

New folder Create a new folder and name it.

Thumbn. view/

List view

Attributes

Switch over to miniature view/view of list.

Display information on file or folder selected.

Format card Format inserted

RS MultiMediaCard .

Eject card Allows the RS MultiMedia-

Card to be removed without loss of data.



122 My stuff

Directory structure

Separate folders have already been created for different data types in

My stuff . These folders cannot be changed.

Folder

MultiMedia-

Card

Description

Access to the card

Format

Pictures Pictures bmp bmx jpg/jpeg png gif

3gp Videos Videos

Animations Start up/shut down animations

Sounds

Themes bmx gif

Melodies, music mp3 m3u aac(+) mid amr wav sdt Loaded theme

(zipped)

Theme configuration (unzipped) stc

Colour skins

Colour skins for the user interface scs

Games Java archive

Download info jar jad

Applications

Misc.

Applications

Text modules

Voice recordings

* tmo vmo

Depending on the service provider, the structure, content and range of functions in

My stuff may vary.


The RS MultiMediaCard gives your phone a very large memory capacity.

This allows you to save picture/video files, and sound recordings, for example. However, you can also use this memory card like a floppy disk to save any other files you may wish to save.

C

¢

N

¢

C

The list of the folders and files is displayed. The first entry is always

My stuff .

The folders and files on the memory card are managed in the same way as in My stuff . If the memory card assigns a file to a function in the phone such as a ringtone, this is copied to

My stuff .


RS MultiMediaCard is a trademark of the

MultiMediaCard Association.

Changing the RS MultiMediaCard

(page 10)

New RS MultiMediaCard™

1. Create a backup copy on a PC of the data on the old memory card.

2. Format the new memory card.

3. Copy the data from the PC onto the new memory card.


Mobile Phone Manager 123

Mobile Phone Manager

The Windows® PC program, Mobile

Phone Manager, enables you to use extended phone functions from your

PC. For example, you can update your

Addressbook in the phone, read, save and send SMS and MMS messages, or synchronise your phone with

Outlook® or Lotus Notes ™ . The phone and PC communicate via a da-

ta cable (See Accessories, page 132).

SMS and MMS management

(messages)

Write MMS and SMS messages from the convenience of your PC. Use all the options your PC offers you and use your sounds and pictures to create MMS and EMS messages. You can read, forward, print, delete and archive your messages.

You can download the software from the Internet: www.siemens.com/m75

Backup and restore

Contacts management

You can use contacts management to manage the personal contacts you have stored in your phone, to add new ones and to delete and edit them. You can compare and copy contacts between your phone,

Outlook®, Lotus Notes ™ and other

Siemens phones (including Gigaset).

With the back-up function, you can regularly make a back-up copy of your telephone data on the PC. If you ever lose the data on your phone or replace the phone, you can quickly re-instate all data with the restore function. Please observe any possible restrictions for DRM-protected

data (page 13).


124 Mobile Phone Manager

Bookmark management

(browser & bookmarks)

Processing pictures and photos

(images)

Use your PC to browse through the

Internet and define your preferred sites. Save the Internet addresses as bookmarks on your phone so that you can quickly call them up at a later time when you are on the move.

Phone explorer

Picture/photo processing offers the user the opportunity to conveniently create, edit and manage pictures and photos. Filters and effects are offered to help create colourful, attractive graphics. The user-friendly interface makes child’s play of transferring pictures/photos from or to the mobile phone, and of changing the graphic settings.

Ringtone management (sound)

You can use the phone explorer to read your phone’s file system. Files such as pictures, sounds and much more can easily be copied between the phone and PC by dragging and dropping.

GPRS modem

The sound module allows the user to manage nearly all sound formats easily and to save them on the phone.

The GPRS modem establishes an Internet connection via your mobile phone so that you can surf the Internet on your laptop while on the move and at the touch of a button.


Questions & Answers 125

Questions & Answers

If you have any questions on the use of your phone, you can contact us at www.siemens.com/mobilephonescustomercare around the clock. As further help we have listed below some frequently asked questions and answers.

Problem

Phone cannot be switched on.

Standby time is too short.

Charging error

(charge icon not displayed).

SIM error.

Possible causes Possible solution

On/Off key not pressed long enough.

Flat battery.

Battery contacts dirty.

See also below under

“Charging error”.

Press On/Off key for at least 2 seconds.

Charge battery. Check charging indicator in the display.

Clean contacts.

Frequent use of organiser and games.

Unintentional keystrokes (illumination!).

Battery totally discharged.

Restrict use if applicable.

Fast search activated.

Deactivate speed search (page 96).

Display illumination switched on. Switch off display illumination (page 79).

Activate key lock (page 93).

Temperature out of range:

+5 °C to +40 °C.

Contact problem

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Make sure the ambient temperature is right, wait for a while, then recharge.

No mains voltage.

Check power supply and connection to the phone. Check battery contacts and telephone connection socket, clean them if necessary, then insert battery again.

Use different mains power socket, check mains voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

SIM card not inserted correctly. Check that the SIM card is inserted correctly

(page 9).

Dirty SIM card contacts.

SIM card with wrong voltage.

SIM card damaged

(e.g. broken).

Clean SIM card with a dry cloth.

Use 1.8 or 3 V SIM cards only.

Carry out a visual check. Have service provider change the SIM card.


126 Questions & Answers

Problem

No network connection.

Possible causes

Weak signal.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Network call barring is set.

Network overloaded.

Phone loses network. Signal too weak.

Calls not possible.

Possible solution

Move higher, to a window or an open space.

Check service provider's coverage area.

Complain to the service provider.

Try manual selection or select a different

network (page 95).

Check network barrings (page 94).

Try again later.

Reconnection to another service provider is

automatic (page 95). Switching phone off and

on again can speed this up.

Second line set.

New SIM card inserted.

Charge limit reached.

Credit used up.

Call restrictions are in place.

Set first line

\

(page 96).

Check for new barrings.

Reset limit with PIN2 (page 39).

Load credit.

Barrings can be set by service provider.

Check barrings (page 94).

Phonebook/Addressbook is full. Delete entries in the Addressbook/Phonebook

(see standard functions, page 15).

Some calls not possible.

Impossible to make entries in Phonebook/

Addressbook.

Voice message not functioning.

ã

flashes to indicate an SMS.

ä

flashes to indicate an MMS.

å

flashes to indicate an MMS.

Function cannot be set.

Capacity problems with, for example,

Games & More, ringtones, pictures, videos, SMS archive.

No Internet access; downloading not possible.

Call divert to mailbox not set.

SMS memory full.

MMS memory full.

Phone memory full.

Not supported by service provider or registration required.

Phone memory full.

Profile not activated, profile settings wrong/incomplete.

Set call divert to mailbox (page 61).

Delete SMS messages (see standard functions,

page 15) or archive them (page 46).

Delete MMS messages (see standard functions,

page 15).

Delete messages, pictures, videos, games or applications.

Contact your service provider.

Delete files in the relevant areas. You can use the memory assistant to delete specific files

(page 84).

Activate or set browser profile (page 71).

If necessary ask your service provider.


Questions & Answers 127

Problem

Text message cannot be sent.

Possible causes

Service provider does not support this service.

Phone number for service centre not set or incorrectly set.

SIM card contract does not support this service.

Service centre overloaded.

Recipient does not have a compatible phone.

Destination phone does not support the EMS standard.

Possible solution


Set service centre (page 48).


Repeat message.

Check.

EMS pictures are not displayed on the destination phone.

No Internet access possible.

PIN error/

PIN2 error.

Incorrect browser profile set, or wrong or incomplete settings.

Three wrong entries.

Check browser settings (page 71), or contact

your service provider.

Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If you have lost the PUK (MASTER PIN), contact your service provider.

Three wrong entries.

Contact Siemens Service (page 128).

No authorisation for this service. Contact your service provider.

Phone code error.

Service provider code error.

Too few/too many menu entries.

No fax possible.

Functions may have been added or deleted by the service provider via the SIM card.

Check with your service provider.

Wrong settings in the PC.

Check settings (page 91).

No authorisation for this service. Contact your service provider.

Charge pulse is not being transmitted.


Charge meter does not work.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet.

Remove battery and SIM. Dry immediately with a cloth, but do not apply heat.

Dry connector contacts thoroughly. Stand mobile upright in an air current.

Do not dismantle the phone!

Reset all settings to factory default, page 85:

* # 9 9 9 9 #

A


128 Customer Care

Customer Care

We offer fast, individual advice! You have several options:

Our online support on the Internet: www.siemens.com/ mobilephonescustomercare

We can be reached any time, any place.

You are given 24 hour support on all aspects of our products. Here you will find an interactive fault-finding system, a compilation of the most frequently asked questions and answers, plus user guides and current software updates to download.

When calling customer service, please have ready your receipt and the phone identity number (IMEI, to display press

* #06#), the software version (to display, press * #06#, then §More§ ) and if available, your Siemens Service customer number.

You will also find the most frequently asked questions and answers in the sec-

tion entitled "Questions & Answers" in this user guide on page 125.

You can also get personal advice about our range of products on our Premium Hotline:

United Kingdom ............................ 0906 9597500

(0.75 £ per minute)

Qualified Siemens employees are waiting to offer you expert information about our products and installation.

In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.

If repair work is necessary, please contact one of our service centres:

Abu Dhabi .........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

Chile..................................................8 00 53 06 62

China ...........................................0 21 23 01 71 88

Colombia....................................01 80 07 00 66 24

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Ecuador ..........................................18 00 10 10 00

Egypt.................................................0 23 33 41 11

Estonia.................................................. 6 30 47 97

Finland ............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany ......................................0 18 05 33 32 26

Greece ............................................80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India .............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy .................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait ................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 70 07 07 00

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

Malaysia....................................+ 6 03 77 12 43 04


Customer Care 129

Malta .......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco ...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 27 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman ....................................................... 79 10 12

Pakistan ..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Peru ..................................................0 80 05 24 00

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 09 99 66

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia ............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand ............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 64 59 98 98

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Venezuela....................................0 80 01 00 56 66

Vietnam...........................................84 89 20 24 64

Zimbabwe ............................................04 36 94 24


130 Care and maintenance

Care and maintenance

A lot of care has gone into designing and manufacturing your phone; please treat it with care. You will enjoy using your phone for a very long time if you follow the suggestions below.

• Keep your phone dry and protect it from moisture. Precipitation, moisture and liquids contain minerals that will corrode electronic circuits. If your phone does become wet, you should immediately disconnect it from the power supply, if there is one, or remove the batteries.

• Never use your phone in dusty or dirty conditions, and don't keep it in such places. The phone's moving parts may be damaged.

• Never keep the phone in places that are too hot. High temperatures can shorten the life of electronic devices, damage batteries and deform or melt certain plastics.

• Never keep the phone in places that are too cold. Moisture that will damage electronic boards may form inside the phone when it warms up again (to its normal operating temperature).

• Never drop the phone; do not expose it to impacts or shocks and do not shake it. Rough treatment like this may break the circuit boards in the device.

• Never clean your phone with corrosive chemicals, cleaning solutions or harsh detergents.

All the above notes apply equally to phones, batteries, chargers and accessories of any kind. If any of these parts do not work properly please take them to your specialist dealer.

They will be able to assist you and repair the device if necessary.


Product data 131

Product data

Declaration of conformity

Siemens Information and Communication mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European

Directive 1999/5/EC (R&TTE). The declaration of conformity (DoC) concerned has been signed. Please call the company hotline if you require a copy of the original or visit: www.siemens.com/mobiledocs

Technical data

GSM class: 4 (2 watt)

Frequency range: 880 –960 MHz


Frequency range: 1,710 – 1,880 MHz


Frequency range: 1,850 – 1,990 MHz

Weight:

Size:

110 g

110.5 × 51.5 × 21 mm

(104 ccm)

Li-Ion battery: 750 mAh

Operating temp.: –10 °C to +55 °C

SIM card: 1.8 or 3.0 V

Phone ID

You will need the following information if you lose your phone or SIM card: the number of the SIM card (on the card):

..............................................................

15-digit serial number of the phone

(under the battery):

..............................................................

the customer service number of the service provider:

..............................................................

Lost phone

If you lose your phone or SIM card contact your service provider immediately to prevent misuse.

Operating times

The operating time depends upon the respective conditions of use.

Extreme temperatures considerably reduce the phone’s standby time.

Avoid placing the phone in the sun or on a heater.

Talktime: up to 300 minutes

Standby time: up to 250 hours

Action taken Time

(min)

Calling

Light *

1

1

Reduction of standby time by

30– 90 minutes

40 minutes

Network search

1 5 – 10 minutes

* Key input, games, organiser etc.


132 Accessories

Accessories

Fashion & Carry

Carrying Cases

A range of carry cases is available at specialist shops or you can visit the Siemens

Mobile Store online at:

Siemens Original Accessories www.siemens.com/shop

Energy

Li-Ion Battery (750 mAh) EBA-660

Spare battery.

Travel Charger

Travel Charger EU ETC-500

Travel Charger UK ETC-510

Travel charger with an extended input voltage range of 100–240 V.

Car Charger Plus ECC-600

Charger for the cigarette lighter socket in the car. It is possible to make phone calls during charging.

Handsfree portable

Headset Basic HHS-500

Simple headset without ptt (push to talk) key.

Headset HHS-510

Headset with ptt (push to talk) key to accept and end calls.

Headset Purestyle HHS-610

High quality headset with removable earpiece and ptt (push to talk) key.

Headset Stereo HHS-700

Stereo headset with ptt (push to talk) key for listening to music and making calls.

Headset Bluetooth ®

HHB-600 with EU power supply unit

HHB-610 with UK power supply unit

HHB-620 with Australian power supply unit

Elegant, small, easy to wear Bluetooth headset.

Office

Data Cable DCA-500

For connecting the phone to the serial

RS232 port of the PC.

Data Cable USB DCA-510

For connecting the phone to the USB port of the PC. With charging function

Data Cable USB DCA-540

For connecting the phone to the USB port of the PC.


Multitainment

Flash IFL-600

Plug-in flash module for taking photos in areas with low ambient light.

Mobile Music Set IMS-700

The portable Mobile Music Set allows to listen to the music of the mobile phone in excellent sound quality everywhere and share it with others via active loudspeakers.

Bike-o-Meter IBS-700

The innovative Bike-o-Meter with additional water protection cap for non-outdoor phones and included altimeter combines a robust and handy cradle for the mobile phone with a powerful bike computer.

Car Solutions

Mobile Holder Antenna HMH-710

The cradle for connecting an external antenna. Ideal for use with headset or car kit portable.

Can also be used as cradle for retrofitting your handsfree car kit (series 55).

Car Kit Comfort Basic HKC-710

Handsfree kit with first-class digital call quality and supreme ease of use. The phone specific Mobile Holder Antenna is necessary in addition

Car Kit Easy HKP-700

Facilitates convenient handsfree talking with high call quality. With the integrated, rotating cradle and the flexible microphone positioning, the telephone can be optimally adjusted to suit any vehicle interior. The power is supplied via the cigarette lighter socket.

Accessories 133

Car Kit Portable HKP-500

With the Car Kit Portable hands-free communication is easily transferred from one vehicle to the next. Simply plug into the cigarette lighter, connect and speak.

Car Kit Bluetooth ® Portable HKW-700

Bluetooth high-tech handsfree kit without cable connection to the mobile phone.

Plugs into cigarette lighter socket – no installation effort.

Car Kit Bluetooth ® HKW-600

Innovative Bluetooth handsfree kit with an external display for making in-car calls safely and conveniently.

Optional car kit accessories

Car-Data Adapter HKO-690

Phone-In Adapter Cable HKO-570

Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online:

Siemens Original Accessories www.siemens.com/shop


134 SAR – European Union (RTTE)

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

THIS MOBILE PHONE MEETS THE

LIMITS SET BY THE EU (1999/519/EC)

FOR PROTECTION OF THE HEALTH

OF THE PUBLIC FROM THE EFFECTS

OF EXPOSURE TO ELECTROMAGNETIC

FIELDS

These limits are part of comprehensive recommendations for the protection of the public. The recommendations were developed and confirmed by independent scientific organisations through periodic and thorough evaluation of scientific studies*. The limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

Before a radio equipment may be placed on the market, compliance with the European laws and the respective technical limit requirements must be demonstrated. Only then the CE mark may be affixed**.

The limit for mobile phones recommended by the Council of the

European Union employs a unit of measurement known as the Specific

Absorption Rate, or SAR. This SAR limit is 2.0 W/kg***. This corresponds with the requirements of the

International Commission for Non-

Ionizing Radiation Protection ICNIRP and was adopted into the European

Norm for Mobile Radio Equipment

EN 50360. The SAR of mobile phones is determined in accordance with the

European Norm EN 50361. This involves measuring the maximum value in all frequency bands of the mobile phone with the phone transmitting at its highest power level.

The actual SAR level of the phone during normal operation may be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output.

The highest SAR value for this phone model when tested for compliance against the standard was

0.44

W/kg****.

You can also find the SAR value for this device on the Internet at this address www.siemens.com/mobilephones

While there may be differences between the SAR levels of various phones and at various positions, all

Siemens products meet the legal requirements.

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states that present scientific information does not indicate the need for any special precautions for use of mobile phones.


Further information: www.who.int/peh-emf , www.mmfai.org

, www.siemens.com/mobilephones

** The CE mark confirms that the product is in compliance with the legal requirements of the European Union as a prerequisite for the placing on the market and the free movement of goods within the European internal market.

*** averaged over 10 g body tissue.

**** SAR values may vary depending on national requirements and frequency bands.

SAR information for different regions can be found at www.siemens.com/mobilephones

SAR – European Union (RTTE) 135


136 SAR – International (ICNIRP)

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

THIS MOBILE PHONE MEETS THE

LIMITS FOR PROTECTION OF THE

HEALTH OF THE PUBLIC FROM THE

EFFECTS OF EXPOSURE TO ELECTRO-

MAGNETIC FIELDS

Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits for exposure to radio frequency (RF) energy recommended by international guidelines from the

International Commission on Non-

Ionizing Radiation Protection

(ICNIRP). These limits are part of comprehensive guidelines for the protection of the public and establish permitted levels of RF energy for the population. The guidelines were confirmed by independent scientific organisations through periodic and thorough evaluation of scientific studies*. The limits include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure limit for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit stated in the international guidelines is

2.0 W/kg**. Tests for SAR are conducted in all frequency bands using standard operating positions with the phone transmitting at its highest power level. The actual SAR level of the phone during operation can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station, the lower the power output.

The highest SAR value for this model phone when tested for use at the ear is

0.44

W/kg***.

SAR information can also be found at www.siemens.com/mobilephones

While there may be differences between the SAR levels of various phones and at various positions, they all meet the international guidelines for safe RF exposure.

* The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland) states that present scientific information does not indicate the need for any special precautions for use of mobile phones.

Further information: www.who.int/peh-emf , www.mmfai.org

, www.siemens.com/mobilephones

** averaged over 10 g of tissue.

*** SAR values may vary depending on national requirements and frequency bands. information for different regions can be found at www.siemens.com/mobilephones


Quality 137

Quality

Battery quality declaration

The capacity of your mobile phone battery will reduce each time it is charged/discharged. Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your mobile phone may be considerably reduced, even after a full recharge of the battery.

Regardless of this, the battery has been designed and manufactured so that it can be recharged and used for six months after the purchase of your mobile phone. After six months, if the battery is clearly suffering from loss of performance, we recommend that you replace it. Please buy only

Siemens original batteries.

Display quality declaration

For technological reasons, some small dots in other colours may appear in the display in rare cases.

Please remember that if some dots appear brighter or darker in the display, this generally does not mean that a fault has occurred.


138 Guarantee certificate (UK)

Guarantee certificate (UK)

Without prejudice to any claim the user (customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer's Guarantee under the conditions set out below:

• In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within

24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. For wearing parts

(e.g., batteries, keypads, housings, small parts on housings, protective coverings where included in the scope of delivery), this durability guarantee shall be valid for six months from the date of purchase.

• This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to comply with information contained in the user manuals.

• This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves

(e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee.

• The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident.

• Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens.

• This Guarantee shall apply to new devices purchased in the European Union.

For Products sold in the United Kingdom the Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

• Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a

Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence.

• The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the customer for replacement or repair.

• The above provisions does not imply a change in the burden of proof to the detriment of the customer.

To invoke this Guarantee, please contact our online support on the Internet www.siemens.com/ mobilephonescustomercare or the Siemens telephone service. The relevant number is to be found in the accompanying user guide.


Guarantee certificate (IRL) 139

Guarantee certificate (IRL)

Without prejudice to any claim the user

(customer) may have in relation to the dealer or retailer, the customer shall be granted a manufacturer’s Guarantee under the conditions set out below:

• In the case of new devices and their components exhibiting defects resulting from manufacturing and/or material faults within

24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In respect of parts subject to wear and tear (including but not limited to, batteries, keypads, casing), this warranty shall be valid for six months from the date of purchase.

• This Guarantee shall be invalid if the device defect is attributable to improper care or use and/or failure to comply with information contained in the user manuals.

In particular claims under the Guarantee cannot be made if:

• The device is opened (this is classed as third party intervention)

• Repairs or other work done by persons not authorised by Siemens.

• Components on the printed circuit board are manipulated

• The software is manipulated

• Defects or damage caused by dropping, breaking, lightning or ingress of moisture.

This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.)

• Devices fitted with accessories not authorised by Siemens

• This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves

(e.g. installation, configuration, software downloads). User manuals and any software supplied on a separate data medium shall be excluded from the Guarantee.

• The purchase receipt, together with the date of purchase, shall be required as evidence for invoking the Guarantee. Claims under the Guarantee must be submitted within two months of the Guarantee default becoming evident.

• Ownership of devices or components replaced by and returned to Siemens shall vest in Siemens.

• This Guarantee shall apply to new devices purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford

Industrial Estate, Dublin 18 – The Republic of Ireland.

• Any other claims resulting out of or in connection with the device shall be excluded from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a

Customers Statutory Rights, nor the manufacturer’s liability for death or personal injury resulting from its negligence.

• The duration of the Guarantee shall not be extended by services rendered under the terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the customer for replacement or repair.

• The above provisions does not imply a change in the burden of proof to the detriment of the customer.

To invoke this Guarantee, please contact our online support on the Internet www.siemens.com/ mobilephonescustomercare or the Siemens telephone service. The relevant number is to be found in the accompanying user guide.


140 License Agreement

License Agreement

This License Agreement ("Agreement") is between You and Siemens Aktiengesellschaft

("Siemens"). The Agreement authorizes You to use the Licensed Software, speci-fied in

Clause 1 below, which may be included in your phone, stored on a CD-ROM, sent to

You by electronic mail or over the air, downloaded from Siemens Web pages or servers or from other sources under the terms and conditions set forth below.

Read this Agreement carefully before using your phone. By using your phone or installing, copying, and/or using the Licensed Software, You acknowledge that You have read and understood the Agreement and agree to be bound by all of the terms and conditions stated below. You further agree that if Siemens or any licensor of Siemens

("Licensor") is required to engage in any proceeding, legal or otherwise, to enforce their rights under this Agreement, Siemens and/or its Licensor shall be entitled to recover from

You, in addition to any other sums due, reasonable attorney's fees, costs and disbursements. If You do not agree to all of the terms and conditions of this Agreement, do not install or use the Licensed Software. This

Agreement governs any Updates, releases, revisions, or enhancements to the Licensed

Software.

1. LICENSED SOFTWARE. As used in this

Agreement, the term "Licensed Software" means collectively: all the software in Your phone, all of the contents of the disk(s),

CD-ROM(s), electronic mail and its file attachments, or other media with which this

Agreement is provided and includes any related Siemens or third party software and upgrades, modified versions, updates, additions and copies of the Licensed Software, if any, distributed over the air, downloaded from Siemens Web pages or servers or from other sources.

2. COPYRIGHT. The Licensed Software and all related rights, without limitation including proprietary rights therein, are owned by

Siemens, its Licensors or affiliates and are protected by international treaty provisions and all applicable national laws. This Agreement does not convey to You nor allow You to acquire any title or ownership interest in the Licensed Software or rights therein. The structure, organization, data and code of the Licensed Software are the valuable trade secrets and confidential information of

Siemens, its Licensors or affiliates. You must reproduce and include the copyright notices with any permitted copies You make of the

Licensed Software.

3. LICENSE AND USE. Siemens grants to

You a non-exclusive, non-transferable end user right to install the Licensed Software or use the Licensed Software installed on the phone. The Licensed Software is licensed with the phone as a single integrated product and may be used with the phone only as set forth in these licensing terms.

4. LIMITATIONS ON LICENSE. You may not copy, distribute, or make derivative works of the Licensed Software except as follows:

(a) You may make one copy of the Licensed

Software, excluding the documentation, as an archival backup copy of the original. Any other copies You make of the Licensed Software are in violation of this Agreement.

(b) You may not use, modify, or transfer the right to use the Licensed Software other than together with the accompanying hardware or copy the Licensed Soft-ware except as expressly provided in this Agreement.


(c) You may not sublicense, rent or lease the

Licensed Software.

(d) You may not reverse engineer, decompile, modify, or disassemble those Licensed

Software programs except and only to the extent that such activity is ex-pressly permitted by applicable law notwithstanding this limitation.

Parts of the Licensed Software may be supplied by third parties and may be subject to separate license terms. Such terms are set out within the documentation.

5. MISUSE OF THE LICENSED SOFT-

WARE OR DATA GENERATED BY THE

LICENSED SOFTWARE IS STRICTLY

PROHIBITED BY SIEMENS, MAY VIOLATE

GERMAN, U.S. AND OTHER LAWS AND

MAY SUBJECT YOU TO SUBSTANTIAL

LIABILITY. You are solely responsible for any misuse of the Licensed Software under this Agreement and for any liability or damage related in any way to your use of the

Licensed Software in violation of this Agreement. You are also responsible for using the

Licensed Software in accordance with the limitations of this Agreement.

6. TERMINATION. This Agreement is effective from the first date you install, copy or otherwise use the Licensed Software. You may terminate this license at any time by deleting or destroying the Licensed Software, all back up copies and all related materials provided to You by Siemens. Your license rights terminate automati-cally and immediately without notice if You fail to comply with any provision of this Agreement. The rights and obligations under sections 2, 5, 6, 7, 9, 12 and 13 of this

Agreement shall survive the termination of this Agreement.

7. YOU ACKNOWLEDGE THE LICENSED

SOFTWARE IS PROVIDED "AS IS" AND

NEITHER SIEMENS NOR ANY OF ITS

LICENSORS MAKE ANY REPRESENTA-

License Agreement 141

TIONS OR WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED

TO THE WARRANTIES OF MERCHANTA-

BILITY OR FITNESS FOR A PARTICULAR

PURPOSE OR THAT THE LICENSED

SOFTWARE WILL NOT INFRINGE ANY

THIRD PARTY PATENTS, COPYRIGHTS,

TRADEMARKS OR OTHER RIGHTS.

THERE IS NO WARRANTY BY SIEMENS

OR ITS LICENSORS OR BY ANY OTHER

PARTY THAT THE FUNCTIONS CON-

TAINED IN THE LICENSED SOFTWARE

WILL MEET YOUR REQUIREMENTS

OR THAT THE OPERATION OF THE

LICENSED SOFTWARE WILL BE UNIN-

TERRUPTED OR ERROR-FREE AND

SIEMENS AND ITS LICENSORS HEREBY

DISCLAIM ANY AND ALL LIABILITY ON

ACCOUNT THEREOF. NO ORAL OR

WRITTEN INFORMATION OR ADVICE

GIVEN BY A SIEMENS REPRESENTATIVE

SHALL CREATE A WARRANTY OR IN ANY

WAY AFFECT THIS DISCLAIMER. YOU

ASSUME ALL RESPONSIBILITY TO

ACHIEVE YOUR INTENDED RESULTS

AND FOR THE INSTALLATION, USE, AND

RESULTS OBTAINED FROM IT.

8. NO OTHER OBLIGATIONS. This Agreement creates no obligations on the part of

Siemens other than as specifically set forth herein.

9. LIMITATION OF LIABILITY. IN NO

EVENT SHALL SIEMENS, ITS EMPLOY-

EES, LICENSORS, AFFILIATES OR

AGENTS BE LIABLE FOR ANY DIRECT

DAMAGES, LOST PROFITS, DATA OR

BUSINESS, OR COSTS OF PROCURE-

MENT OF SUBSTITUTE GOODS OR

SERVICES, PROPERTY DAMAGE, INTER-

RUPTION OF BUSINESS OR FOR ANY

SPECIAL, INDIRECT, INCIDENTAL, EXEM-

PLARY, ECONOMIC, PUNITIVE OR CON-

SEQUENTIAL DAMAGES, HOWEVER

CAUSED, AND WHETHER ARISING UN-


142 License Agreement

DER CONTRACT, TORT, NEGLIGENCE,

OR OTHER THEORY OF LIABILITY, OR

ARISING OUT OF THE USE OF OR INABIL-

ITY TO USE THE LICENSED SOFTWARE,

EVEN IF SIEMENS IS ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. THE

LIMITATION OF LIABILITY SHALL NOT

APPLY IF AND TO THE EXTENT SIEMENS´

LIABILITY IS MANDATORY UNDER THE

APPLICABLE LAW E.G. ACCORDING TO

PRODUCT LIABILITY LAW OR IN THE

EVENT OF INTENTIONAL MISCONDUCT,

PERSONAL INJURY OR DEATH.

10. TECHNICAL SUPPORT. Siemens has and its Licensors have no obligation to furnish you with technical support unless separately agreed in writing between You and

Siemens or the applicable Licensor.

Siemens and where applicable its Licensors in the Licensed Software shall be free to use any feedback received from You resulting from your access to and use of the Licensed

Software for any purpose including (without limitation) the manufacture, marketing and maintenance or support of products and services.

11. EXPORT CONTROL. The Licensed Software may include technical data and cryptographic software and is subject to German,

European Union and U.S. export controls and may be subject to import or export controls in other countries. You agree to strictly comply with all applicable import and export laws and regulations. Specifically, You agree, to the extent required by U.S. Export

Administration Regulations, that You shall not disclose or otherwise export or re-export the Licensed Software or any part thereof delivered under this Agreement to (a) Cuba,

Iran, Iraq, Libya, North Korea, Sudan, Syria or any other country (including a national or resident of such country) to which the U.S. has restricted or prohibited the export of goods or services.

12. APPLICABLE LAW AND FORUM. The laws of Germany govern this Agreement. No choice of law rules of any jurisdiction will apply. The courts in Munich shall settle any disputes arising out of or relating to this Agreement provided you are a merchant.

13. MISCELLANEOUS. This Agreement represents the entire agreement between You and Siemens relating to the Licensed Software and (i) supersedes all prior or contemporaneous oral or written communications, proposals, and representations with respect to its subject matter; and (ii) prevails over any conflicting or additional terms of any acknowledgement or similar communication between the parties during the term of this

License. Notwithstanding the foregoing, some products of Sie-mens may require You to agree to additional terms through an online "click-wrap" license, and such terms shall supplement this Agreement. If any provision of this Agreement is held invalid, all other provisions shall remain valid unless such validity would frustrate the purpose of this Agreement, and this Agreement shall be en-forced to the full extent allowable under applicable law. No modification to this Agreement is binding, unless in writing and signed by a duly authorized representative of each party.

This Agreement shall be binding on and shall inure to the benefit of the heirs, successors, and assigns of the parties hereto. The failure of either party to enforce any right resulting from the breach of any provision of this

Agreement by the other party will not be deemed a waiver of any right related to a subsequent breach of such provision or any other right hereunder. Notwithstanding anything to the contrary in this Agreement,

Siemens and/or its licensors may enforce its rights, including but not limited to copyright, trademark or trade names, in accordance with the rules of law in each country.


Menu tree 143

Menu tree

Default book > Show entries

New entry

Business card

Groups

Default book

<Info numbers>

Call records > Calls missed

Calls received

Calls dialled

Delete records

Time/charge > Last call

All incom.calls

All outg. calls

Remain. units

Charge sett.

Surf & fun > URL/service provider

Games

Applications

Downl. assist.

Bookmarks

Internet

Camera

Messages

> Create new > SMS text

MMS

E-mail

Inst. message

> Personal rate

Charge limit

Auto display


144 Menu tree

Messages

> Inbox

Draft

Unsent

Sent

MMS templates

SMS archive

Text modules

Message setup

> SMS

MMS

E-mail

WAP push

Retr. e-mail

Send/rec. mail

CB messages

> SMS

MMS

E-mail

> SMS

MMS

E-mail

Send e-mail

Send/rec. mail

> SMS

MMS

E-mail

> Text zoom

SMS setup

MMS setup

E-mail setup

> SMS profiles

SMS signature

> Connection profile:

User settings

Help

> Accounts

General sett.

Help


Messages

> Message setup > WAP push set.

Voice message

CB services

Organiser

Extras

My stuff

Setup

> Calendar

Appointments

Tasks

Notes

Missed appts.

Dictat.machine

Time zones

Calendar setup

> SIM services

Music Player

Push to talk

Alarm clock

Sound recorder

Calc.

Unit converter

Stopwatch

Countdown

Remote syncr.

Device manag.

> Profiles

Themes

Display setup > Language

Text input

Wallpaper

Logo

Colour skin

Screensaver

Start up anim.

Menu tree

> Security sett.

Help

> Receive CB

Topic list

CB languages

> T9 preferred

Input language

145


146

Setup

Menu tree

> Display setup

Ringtones

Call setup

> Shutdn anim.

Own greeting

Big letters

Illumination

Contrast

> Ringer setting

Silent alert

Volume d Calls

Group calls

Other calls

Push to talk

More melodies

> Hide ID

Call waiting

Divert

Call screening

Any key answ.

Minute beep

> Calls

Push to talk

Messages

CB services

Alarm clock

Organiser

System

Applications

> Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

> All calls

Unanswered

Not reachable

No reply

Busy

Receiving fax

Receiving data

Status check

Clear all


Setup

> Phone setup

Clock

Connectivity

Security

Menu tree 147

> Key tones

Info tones

Auto off

Phone identity

Memory assis.

File system

Master reset

> Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time

> GPRS

GPRS info

IrDA

Bluetooth

Data services

HTTP profile

Authentication

Fax/data

> Auto key lock

Direct call

Only ‚

> Format

Clean up

Format card

Eject card

> Search

Search all

Known devices

Last connect.

Black list

My BT name

Visib.to others

Help

> Send voice/fax

Rec. voice/fax

Rec. fax/data


148

Setup

Menu tree

> Security

Network

Accessories

> PIN codes

This SIM only

Barrings

> Line

Network info

Choose netwrk

Auto network

Pref. network

Band selection

Fast search

User group

> PIN control

Change PIN

Change PIN2

Chg.phonecode

> Outgo. access

Outgoing intl.

Out.int.x.home

All incoming

When roaming

Status check

Clear all

> Select line

Protected

> Car Kit

Headset

> Active

Select group

All outgoing

Pref. group

> Auto answer

Automatic switch off

Car loudspk.

> Auto answer


Index 149

Index

A

Accessories....................................... 132

Addressbook

Dial entry........................................ 33

Groups ........................................... 34

New entry ...................................... 31

Read entry ...................................... 33

Aircraft mode...................................... 76

Alarm

Alarm clock................................... 113

Type............................................. 103

Alarm clock....................................... 113

All calls (diversion).............................. 83

All incoming (barrings) ....................... 94

Answering service (external) ............... 61

Any key to answer .............................. 83

Appointments................................... 102

Authentication.................................... 92

Auto display

Clock .............................................. 86

Duration/charges ............................ 39

Auto key lock ...................................... 93

Auto time zone ........................... 86, 106

Auto. network dialling......................... 95

Auto. redial......................................... 24

Automobile accessories..................... 133

B

Band selection .................................... 96

Battery

Charge ........................................... 11

Insert................................................ 9

Operating times...................... 11, 131

Quality Declaration ....................... 137

Big letters ........................................... 79

Bluetooth ........................................... 88

Bookmarks (WAP) ......................... 70, 72

Browser .............................................. 71

Buddh. year ........................................ 86

Business card ...................................... 30

Busy number ...................................... 24

C

Calculator ......................................... 115

Calendar........................................... 101

Call

Accept/end ..................................... 25

Barring ........................................... 94

Charges.......................................... 39

Conference .................................... 26

Divert............................................. 82

End ................................................ 23

Hold............................................... 25

Menu ............................................. 27

Reject............................................. 25

Swap between calls (change) ......... 25

Call back............................................. 24

Call divert........................................... 82

Call screening..................................... 83

Call transfer........................................ 27

Call waiting ...................................26, 82

Calling................................................ 23

Calls dialled (call record)..................... 38

Calls received (call record) .................. 38

Camera .............................................. 40

Car Kit

Accessories .................................. 133

Setting........................................... 97

Car kit accessories ............................ 133

Care of phone .................................. 130

Cell Broadcast (CB) ............................. 69

Charges.............................................. 39

Charges/units ..................................... 39

Charging the battery .......................... 11

Clock.................................................. 86

Colour skin ......................................... 78

Conference ........................................ 26

Connection profiles ............................ 90

Connectivity ....................................... 87

Contact list......................................... 63

Control code (DTMF) .......................... 28

Converter ......................................... 116

Countdown ...................................... 117

Credit limit ......................................... 39

CSD settings ....................................... 90

Currency converter........................... 116

D

Date format........................................ 86

Default book ...................................... 30

Device manag. ................................. 119

Dialling code ...................................... 23

Dialling with number keys .................. 23

Dictating machine ............................ 105

Digital Rights Management................. 13

Direct reply (SMS)............................... 48


150 Index

Display

Illumination.................................... 79

Language ....................................... 78

Symbols ........................................... 7

Wallpaper image............................. 78

Divert ................................................. 82

Download........................................... 73

DTMF tones (tone sequences) ............. 28

Duration/charges ................................ 39

E

E-mail

Lists................................................ 59

Settings.......................................... 60

Write .............................................. 58

Emergency number ............................ 12

Extras ............................................... 107

F

Fast access.......................................... 99

Fast network search............................ 96

Fax/data mode.................................... 91

Flash .................................................. 41

Formatting (phone memory)............... 85

Formatting (SMS text)......................... 44

Forwarding (call) ................................ 27

Frequency range................................. 96

G

Games and applications ...................... 73

GPRS................................................... 87

Groups ............................................... 34

Guarantee certificate ........................ 138

H

Handset volume.................................. 23

Handsfree talking................................ 25

Headset

Accessories................................... 132

Setting ........................................... 97

Hide ID ............................................... 82

Highlighting mode.............................. 16

Hold call ....................................... 25, 27

Home network.................................... 95

Hotline ............................................. 128

HTTP profile ........................................ 91

I

Identity number (IMEI)........................ 84

IMEI number....................................... 84

Inbox.................................................. 43

Info tones ........................................... 84

Information services (CB) .................... 69

Infrared (IrDA) .................................... 87

Input language (T9)............................ 20

Inst. Message ..................................... 62

International dialling code .................. 24

Internet.............................................. 70

J

Joystick ................................................ 5

K

Key tones ........................................... 84

L

Language ........................................... 78

License Agreement........................... 140

Limit (duration/charges) ..................... 39

Logo .................................................. 78

Loss of phone, SIM card.................... 131

M

Mailbox.............................................. 61

Maintenance of phone ..................... 130

Master reset ....................................... 85

Media player .................................... 120

Memory assistant ............................... 84

Menu

Controls ......................................... 14

My menu ....................................... 98

Speed dialling ................................ 16

Menu speed dialling ........................... 16

Menu tree ........................................ 143

Message

CB.................................................. 69

E-mail ............................................ 58

MMS .............................................. 50

SMS ..........................................44, 46

Message memory full. ........................ 49

Message type ..................................... 48

Microphone on/off.........................27, 42

Minute beep....................................... 83

Missed appointments ....................... 104

Missed calls (call record)..................... 38

MMS

Lists ............................................... 55

Receive .......................................... 54

Send .............................................. 53

Write.............................................. 50

Mobile Phone Manager..................... 123

MultiMediaCard................................ 122

Muting (microphone) ....................27, 42

My items ............................................ 29

My menu............................................ 98

My stuff ........................................... 121


N

Network

Barring ........................................... 94

Connection..................................... 95

Settings.......................................... 95

Notes................................................ 104

O

One number only................................ 27

Only ‚

............................................. 93

Operating times (battery)............ 11, 131

Organiser.......................................... 101

Own (phone) numbers........................ 37

Own greeting ..................................... 79

P

Phone code......................................... 17

Phone data ....................................... 131

Phone identity number (IMEI) ............. 84

Phone number memo ......................... 24

Phone number transmission on/off...... 82

Phone setup ....................................... 84

Phonebook

Call an entry ................................... 36

New entry ...................................... 35

Protected SIM ................................. 37

Special books.................................. 37

VIP numbers ................................... 37

Photo ................................................. 40

Pictures & sounds (SMS)...................... 45

PIN

Change........................................... 17

Control........................................... 17

Enter .............................................. 12

Error............................................. 127

PIN2 ................................................... 17

Preferred network............................... 95

Preventing accidental activation.......... 18

Product data ..................................... 131

Profiles

MMS .............................................. 56

Phone............................................. 75

SMS................................................ 48

WAP ............................................... 72

Prompt ............................................... 24

Provider logo ...................................... 78

PUK, PUK2 .......................................... 17

Push to talk....................................... 108

Q

Questions & Answers ........................ 125

Index 151

R

Records .............................................. 38

Redial................................................. 23

Reminder ........................................... 24

Remote synchronisation ................... 118

Ringtone setting................................. 80

Ringtones......................................34, 80

S

Safety precautions................................ 3

Screensaver........................................ 78

Second phone number ....................... 95

Security.............................................. 17

Security codes .................................... 17

Service centre (SMS)........................... 48

Service provider portal........................ 29

Service tones...................................... 84

Set time/date...................................... 86

Settings.............................................. 75

Short message (SMS).......................... 44

Shown in the display ............................ 7

Shut down animation ......................... 79

Siemens City Portal............................. 29

Signal strength................................... 13

Silent alert.......................................... 80

SIM card

Clear barring .................................. 18

Insert ............................................... 9

Problems...................................... 125

SIM services (optional) ..............107, 112

SMS

Archive .......................................... 47

Lists ............................................... 47

Profiles........................................... 48

Read .............................................. 46

Settings ......................................... 48

Signature ....................................... 48

T9 input ......................................... 20

To group ........................................ 45

Write.............................................. 44

Software version ................................ 84

SOS.................................................... 12

Sound recorder................................. 114

Special books ..................................... 37

Special characters............................... 19

Speech time (battery) ....................... 131

Speed dialling keys ........................... 100

Standard functions ............................. 15

Standby mode .................................... 13

Standby time...............................11, 131

Start up animation.............................. 79


152 Index

Stopwatch ........................................ 117

Storage location (Phonebook) ............. 35

Surf & fun ........................................... 70

Swap .................................................. 25

Switch off phone

Automatic ...................................... 84

Manually ........................................ 12

Switch on phone................................. 12

Symbols................................................ 7

Synchronisation................................ 118

T

T9 text input....................................... 20

Tasks ................................................ 103

Technical data .................................. 131

Text entry

With T9 .......................................... 20

Without T9 ..................................... 19

Text module ....................................... 22

Themes .............................................. 77

This SIM only ...................................... 93

Time zones ........................... 12, 86, 106

U

Unanswered ....................................... 82

Upper and lowercase letters (T9)......... 19

User group.......................................... 96

V

Validity (SMS) ..................................... 48

Video mode ........................................ 41

Video playback.................................. 120

Voice message (mailbox) .................... 61

Volume

Handset volume ............................. 23

Profiles ........................................... 75

Ringtone ........................................ 80

W

Wallpaper (display) ............................. 78

WAP push ........................................... 43

No results