Form No. 3455-226 Rev A
Flex-Force Power System ™
60V MAX Battery Charger
Model No. 81801—Serial No. 323000001 and Up
Register at www.Toro.com.
Original Instructions (EN)
*3455-226*
Introduction
This battery charger is intended to be used by residential homeowners.
This charger is designed to charge only Toro 60V lithium-ion battery packs.
It is not designed to charge any other batteries. Using this product for purposes other than its intended use could prove dangerous to you and bystanders.
Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely.
Visit www.Toro.com for more information, including safety tips, training materials, accessory information, help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready.
Figure 1
identifies the location of the model and serial numbers on the product. Write the numbers in the space provided.
Important: With your mobile device, you can scan the QR code on the serial number decal (if equipped) to access warranty, parts, and other product information.
g400607
1.
Model and serial number location.
Figure 1
© 2022—The Toro®
Company
8111 Lyndale Avenue
South
Bloomington, MN
55420
Register at www.Toro.com.
Original Instructions
(EN)
Printed in China
All Rights Reserved
*3455-226*
Model No.
Serial No.
Safety-Alert Symbol
The safety-alert symbol (
Figure 2 ) shown in this manual and on the
machine identifies important safety messages that you must follow to prevent accidents.
g000502
Figure 2
Safety-alert symbol
The safety-alert symbol appears above information that alerts you to unsafe actions or situations and is followed by the word DANGER ,
WARNING , or CAUTION .
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
This manual uses two other words to highlight information.
Important calls attention to special mechanical information and Note emphasizes general information worthy of special attention.
3
Safety
IMPORTANT SAFETY INSTRUCTIONS
1.
SAVE THESE INSTRUCTIONS—This manual contains important safety and operating instructions for Toro 60V lithium-ion battery packs and Toro 60V lithium-ion battery chargers.
2.
Before using the battery charger, read all the instructions and cautionary markings on the battery charger, battery pack, and product using the battery pack.
3.
CAUTION—To reduce risk of injury, charge Toro 60V lithium-ion battery packs with Toro 60V lithium-ion battery chargers only. Other brands of battery packs may burst, causing personal injury and damage.
4.
WARNING—Plugging the battery charger into an outlet that is not
220 to 240 V can cause a fire or electric shock. Do not plug the battery charger into an outlet other than 220 to 240 V. For a different style of connection, use an attachment plug adapter of the proper configuration for the power outlet if needed.
I. Training
1.
Do not allow children or untrained people to operate or service this device. Allow only people who are responsible, trained, familiar with the instructions, and physically capable to operate or service the device.
2.
Do not allow children to use or play with the battery pack or battery charger; local regulations may restrict the age of the operator.
II. Preparation
1.
Use appliances only with specifically designated battery packs.
Using other types of battery packs may create a risk of injury and/or fire.
2.
Do not use a damaged or modified battery pack or battery charger.
It may exhibit unpredictable behavior, resulting in fire, explosion, or risk of injury.
3.
If the supply cord to the battery charger is damaged, contact an
Authorized Service Dealer to replace it.
III. Operation
1.
Charge the battery pack with only the battery charger specified by
Toro. A charger suitable for 1 type of battery pack may create a risk of fire when used with another battery pack.
4
2.
Charge the battery pack in a well-ventilated area only.
3.
Follow all charging instructions and do not charge the battery pack outside of the temperature range specified in the instructions.
Otherwise, you may damage the battery pack and increase the risk of fire.
4.
Under abusive conditions, the battery pack may eject liquid; avoid contact. If you accidently come into contact with the liquid, flush with water. If the liquid contacts your eyes, seek medical help. Liquid ejected from the battery pack may cause irritation or burns.
5.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130°C (265°F) may cause explosion.
6.
CAUTION—A mistreated battery pack may present a risk of fire, explosion, or chemical burn.
• Do not disassemble the battery pack.
• Replace the battery pack with a genuine Toro battery pack only; using another type of battery pack may cause a fire or risk of injury.
• Keep battery packs out of the reach of children and in the original packaging until you are ready to use them.
IV. Maintenance and Storage
1.
Do not allow children to clean or maintain the battery charger.
2.
When the battery pack is not in use, keep it away from metal objects such as paper clips, coins, keys, nails, and screws that can make a connection from 1 terminal to another. Shorting the battery terminals may cause burns or a fire.
3.
Do not attempt to repair the battery pack or battery charger. Have an Authorized Service Dealer perform service on the battery pack or battery charger using identical replacement parts to ensure that the product is safely maintained.
4.
Check with local codes for possible special battery disposal instructions.
SAVE THESE INSTRUCTIONS
5
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing.
decal144-6022
144-6022
1.
Read the
Operator’s
Manual .
3.
Double insulated
2.
For indoor use 4.
Do not dispose improperly decal144-3094
1.
The battery pack is charging.
144-3094
2.
The battery pack is fully charged.
3.
The battery pack is over or under the appropriate temperature range.
4.
Battery pack charging fault
6
Setup
Installing the Correct Plug
If necessary, remove and install the correct plug from the charger to match your receptacle as shown in
Figure 3 .
Figure 3 g347487
7
Product Overview
Specifications
Battery Charger
Model
Type
Input
Output
81801
60V MAX Lithium-Ion Battery Charger
220 to 240V AC 50-60Hz Max 2.0A
60V MAX DC 1.0A
Battery Pack
Model
Battery pack capacity
81820
2.0 Ah
108 Wh
81825
2.5 Ah
135 Wh
81850
4.0 Ah
216 Wh
81860
6.0 Ah
324 Wh
81875
7.5 Ah
405 Wh
68810
10.0 Ah
540 Wh
Battery manufacturer rating = 60V maximum and 54V nominal. Actual voltage varies with load.
Appropriate Temperature Ranges
Charge battery pack at
Use battery pack at
Store battery pack/charger at
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
5°C (41°F) to 40°C (104°F)*
*Charging time will increase if you do not charge the battery within this range. Store the tool, battery pack, and battery charger in an enclosed clean, dry area.
Store the machine, battery pack, and battery charger in an enclosed clean, dry area.
8
Operation
Charging the Battery Pack
Important: Charge the battery pack only in temperatures that are within the appropriate range; refer to
Specifications (page 8)
.
Note:
At any time, press the battery-charge-indicator button on the battery pack to display the current charge (LED indicators).
1.
Ensure that the vents on the battery are clear of any dust and debris.
g347460
1.
Battery pack cavity
2.
Battery pack venting areas
3.
Battery pack terminals
Figure 4
4.
Battery-charge-indicator button
5.
LED indicators (current charge)
6.
Handle
2.
Line up the cavity in the battery pack ( Figure 4 ) with the tongue on
the charger.
3.
Slide the charger into the battery pack until it is fully seated (
Figure 4
).
4.
To remove the battery pack, slide the charger backward out of the battery pack.
9
5.
Refer to the following table to interpret the LED indicator light on the battery charger.
Indicates Indicator light
Off
Green blinking
Green
Red
Red blinking
No battery pack inserted
Battery pack is charging
Battery pack is charged
Battery pack and/or battery charger is over or under the appropriate temperature range
Battery pack charging fault*
*Refer to
Troubleshooting (page 12)
for more information.
Important: The battery can be left on the charger for short periods between uses.
If the battery will not be used for longer periods, remove the battery from the charger; refer to
Storage (page 11)
.
10
Maintenance
Maintenance and servicing are not required under normal conditions.
When you clean the surface of the equipment, wipe it only with a dry cloth.
Do not disassemble the equipment; if it is damaged, contact your
Authorized Service Dealer.
Storage
Important: Store the charger only in temperatures that are within the appropriate range; refer to
Specifications (page 8)
.
Important: If you are storing the charger for the off-season, ensure that it is unplugged and that there are no batteries installed.
• Disconnect the product from the power supply (i.e., remove the battery pack) and check for damage after use.
• Do not store the charger with the battery pack installed.
• Clean all foreign material from the product.
• Do not store any machine with the battery pack installed.
• When not in use, store the tool, battery pack, and battery charger out of the reach of children.
• Keep the tool, battery pack, and battery charger away from corrosive agents, such as garden chemicals and de-icing salts.
• To reduce the risk of serious personal injury, do not store the battery pack outside or in vehicles.
• Store the tool, battery pack, and battery charger in an enclosed clean, dry area.
11
Troubleshooting
Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself.
Problem
The battery charger is not working.
The LED indicator light on the battery charger is blinking red.
Possible Cause
1. The battery charger is over or under the appropriate temperature range.
2. The outlet that the battery charger is plugged into does not have power.
1. There is an error in the communication between the battery pack and the charger.
Corrective Action
1. Unplug the battery charger and move it to a place where it is dry and the temperature is between 5°C (41°F) and 40°C (104°F).
2. Contact your licensed electrician to repair the outlet.
2. The battery pack is weak.
1. Remove the battery pack from the battery charger, unplug the battery charger from the outlet, and wait
10 seconds. Plug the battery charger into the outlet again and place the battery pack on the battery charger. If the
LED indicator light on the battery charger is still blinking red, repeat this procedure again.
If the LED indicator light on the battery charger is still blinking red after 2 attempts, properly dispose of the battery pack at a battery recycling facility.
2. Properly dispose of the battery pack at a battery recycling facility.
12
Notes:
Notes:
EEA/UK Privacy Notice
Toro’s Use of Your Personal Information
The Toro Company (“Toro”) respects your privacy. When you purchase our products, we may collect certain personal information about you, either directly from you or through your local Toro company or dealer. Toro uses this information to fulfil contractual obligations - such as to register your warranty, process your warranty claim or to contact you in the event of a product recall - and for legitimate business purposes - such as to gauge customer satisfaction, improve our products or provide you with product information which may be of interest. Toro may share your information with our subsidiaries, affiliates, dealers or other business partners in connection these activities. We may also disclose personal information when required by law or in connection with the sale, purchase or merger of a business. We will never sell your personal information to any other company for marketing purposes.
Retention of your Personal Information
Toro will keep your personal information as long as it is relevant for the above purposes and in accordance with legal requirements. For more information about applicable retention periods please contact [email protected]
.
Toro’s Commitment to Security
Your personal information may be processed in the US or another country which may have less strict data protection laws than your country of residence. Whenever we transfer your information outside of your country of residence, we will take legally required steps to ensure that appropriate safeguards are in place to protect your information and to make sure it is treated securely.
Access and Correction
You may have the right to correct or review your personal data, or object to or restrict the processing of your data. To do so, please contact us by email at [email protected]. If you have concerns about the way in which Toro has handled your information, we encourage you to raise this directly with us.
Please note that European residents have the right to complain to your Data Protection Authority.
374-0282 Rev C
