NANO PODS Ture Wirelss Earbuds
with Tuya APP Control
Bluetooth Version: V5.3
Speaker Diameter: 10 mm
Speaker Power Output: 3 mW
Speaker Sensitivity: 105dB at 1KHz
Speaker Impedance: 32 Ω
Battery Capacity: 3.7V, 300mAh
Frequency Response: 50Hz-5KHz
Bluetooth Connecting Range: 10m
APP: Tuya Smart APP
BATTERY CASE:
Capacity: 300 mAh
Charging Port: USB Type-C
Earphone Battery: 35 mAh
Playing Time:
Up to 5H + 15H with charging case
Charging Time: approx. 1H
②
③
⑤
④
①
Model No.: IQ-24
1
TWS
Please read carefully this manual before operating the device.
⑥
FCC ID:2AMD8IQ-241TWS
⑦
Pairing the Earbuds with your mobile device
•Once you take out the earbuds from the charging case, they will pair with each other automatically within 2 seconds. The LED indicator (4) on both earbuds will be flashing green alternately. After pairing, the left earbuds will flash green alternately.
•Activate the Bluetooth function on your device and search for nearby devices.
•Select“ IQ-241TWS ” from the list to connect with the TWS earbuds.
•Once paired successful, you would hear a beep and the LED will turn off.
•Your device is now connected and you can play music or take calls with your
IQsound Nano Pods TWS Earbuds.
AUTO CONNECTION
•After you pair the earbuds to your device for the first time, the earbuds will pair your deviceautomatically once they're taken out of charging case.
• Note: When the abnormal operation of the user causes the device to only connect to a single earbud orcannot search for the Bluetooth name, please put the dual earbuds back into the charging case, delete the pairing record in the device, then turn off the device Bluetooth. Then reconnect your device with the earbuds in standard way.
•Power On: Take out the earbuds from charging case. The earbuds will power on automatically or long press MF touch button for 3 seconds.
• Power Off: Put it into the charging case to automatically power off or long press
MF touch button for 4 seconds until green light flashes.
•Play/Pause: Touch one of the earbuds MF button during play to pause, and touch
MF button to re play again.
•Answer /End call: Touch any of the earbud MF button to answer the call. To end the call , touch any of the MF button again to hang up while on call.
•Reject the call: Long touch MF button for 1.5 seconds when incoming call.
•Increase Volume: Double touch the right MF button when the device is connected to increase volume.
•Decrease Volume: Double touch the left MF button when the device is connected to decrease volume.
•Previous Track: Touch the left MF button 3 times to skip previous track.
•Next Track: Touch the right MF button 3 times to skip next track.
•Google / Siri Activate: Touch and hold the MF button for 2 seconds on either of the earbuds to activate.
Once the earbuds reach low battery, the LED indicator (6) will be flashing green on the earbuds three times. Put both earbuds into the charging case , the earbuds will now automatically start charging.
How to charge the charging case
• Plug the Type C end of the included cable into the charging case (7)
• Plug the USB-A side of the included cable into a suitable USB charger on other power source or any computer or other 5V but current do not exceed 2A output charger.
• While the earbuds are charging, the LED indicator on the charging case (6) will be constantly green.
• Once the charging case is fully charged the LED indicator will automatically turn off.
How to use Tuya Smart APP
APP Download
Download the Tuya Smart App on your mobile phone. You can search Tuya Smart
App in your APP store or scan below QR Code.
Connect with APP and mobile phone at the first time
1.After the earbus is turned on, click on the APP and wait for the pairing popup,
Click Add - NEXT- Done in sequence to complete the connection with the APP.
2.Then connect device with Bluetooth.
TIPS: Please turn on your Bluetooth and location before connecting.
Connect with APP and mobile phone at the second time
After the earbus is turned on, ensure the network signal is good. Click the APP and wait for the connection.
EQ Choice (Equalizer)
1.There are 20 different kinds of EQ for choice. Dynamic, bass boast and vocals……
2.The equalizer can be adjusted through Tuya App. Enter APP and got to setting
page, you can choose the sound effect you want.
Settings
1.From the setting menu, you can change the bluetooth name of your TWS.
Enter APP and go to setting page, edit the bluetooth name.
2.You can turn on/off the gaming mode function (low latency).
Last TWS Location
1.This function can help you in locating the TWS. While using the online status
will record your positionin use, the last offline position and the time since the
last use.
2.The earbuds Ring to find after receiving the phone, you can control the sound
of the earbuds to help you find the earbuds hidden in the corner.
Disconnection and Connecting to another Device:
1.lf you want to use the IQsound Nano Pods (IQ-241TWS) on another mobile phone, first you need to disconnect to the current device and connected
Tuya Smart App.
2.Click on the upper right button of the APP (As shown in image) to enter device disconnection interface.
3.Follow the below process:
Remove Device > Disconnect and wipe Data, this will disconnect your device with Tuya Smart App, then disconnect the bluetooth device from the phone.
And search for IQsound Nano Pods (IQ-241TWS) in new mobile device.
TIPS: If you can't find the TWS on your new device, reset the earbuds with six quick taps on the MFB touch button on either earbud, and you can find it on your new device.
• Do not expose the earbuds to excessive amounts of liquid, moisture or humidity to avoid the product's internal circuit of being affected.
• Do not use abrasive cleaning solvents to clean the device.
• Only clean the product with a slightly damp cloth and mild washing-up liquid.
• Do not listen to high volume sound for a prolonged time to avoid hearing damage. Set the volume to a safe level. The louder the volume, the higher the damage.
• Only use a charger with the right output, the output can be found on the rating label of the earbuds. In case of any doubts don't use the charger!
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
• Do not expose earbuds to extreme temperatures.
• Do not attempt to modify this product. Doing so will void the warranty and could result in personal injury or product failure.
• Do not immerse in water. such as while taking a bath or washing your face, otherwise sound deterioration or failures may result.
• Wipe the earbuds and sleeves with mild antiseptic toavoid infections. Do not use alcohol-based disinfectants.
• The cable connectors to the earbuds may collect debrisor other deposit that can affect audio quality. If this is happens, disconnect the cables and clean them using a dry cotton swab.
• Set the volume level of the audio device to minimum, and then after connecting the earbuds, adjust the volume gradually. Sudden exposure to loud noises could cause hearing damage.
• Stop using the earbuds immediately if they are causing great discomfort, iritation, rash, discharge, or any other uncomfortable reaction.
• Do not use when a failure to hear your surroundings could be dangerous, such as while driving, or when biking, walking, or jogging where traffic is present and accidents could occur.
DISPOSAL
ENVIRONMENTAL PROTECTION
Waste electrical production should not be disposed of with ho usehold waste.Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
Warranty
Basic Warranty StatementSupersonic Inc.("Supersonic") warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) required.
Please visit http://www.supersonicinc.com/warranty for additional information.
Garantía
Declaración básica de garantía Supersonic Inc. ("Supersonic") garantiza este producto al comprador original SOLAMENTE, para estar libre de defectos en materiales y mano de obra bajo uso normal, por noventa (90)
DÍAS a partir de la fecha de compra original. Se requiere una prueba de compra (recibo). Visite http://www.supersonicinc.com/warranty para obtener información adicional.
T his device complies with part 15 of the FCC R ules. O peration is subject to the following two conditions:
( 1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
N OT E : This e q uipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interferenc e in a residential installation.
This e q uipment generates, uses and canradiate radio fre q uency energy and, if not i nstalled and used in accordance with the instructions, maycause harmful interference to radio communications.
H
— owever,
—I
there is
Reorient or
no guarantee that interferencewill ncrease the separation between the e
— Connect the e
— Consult the dealer or an e
W the user
relocate q
the receiving x antenna.
q uipment perienced radio arning: Changes or modifications not e
' s authority to operate the e q
/ T uipment.
not
and occur in
receiver.
a particular
that
installation.
to which the
I f
receiver this e q uipment is connected.
does
V technician for help.
x pressly approved by the party responsible for compliance could void c ause harmful interference to radio ortelevision reception, which can be determined by turning the e q uipment off a nd on, the user isencouraged to try to correct the interference by one or more of the following measures: uipment into an outlet on a circuit different from
