DigiPos WD-202A Customer Display User's Manual
Reklamë
Reklamë
Vacuum Fluorescent
Customer Display
MODEL : WD-202A*
Version: 1.38
Customer Display
MODEL : WD-202A*
Version: 1.38
WD-202A customer display
1
INDEX
1. FEATURES ....................................................................................... 3
2. GENERAL SPECIFICATIONS......................................................... 4
3. UNPACKING AND CHECKING THE PARTS................................. 5
4. INTERFACE ..................................................................................... 6
4.1 S PECIFICATIONS ............................................................................. 6
4.2 T HE COMMUNICATION FLOW ............................................................ 6
4.4 I NTERFACE CONNECTOR (O N THE BUTTOM OF THE BASE SECTION ) ..... 7
4.5 P OWER S UPPLY C ONNECTORS .......................................................... 7
4.6 RS232C LINK TO PC/HOST CONNECTOR (CN5) ............................... 8
4.7 RS232C LINK TO PRINTER CONNECTOR (CN3) .................................. 8
4.8 RS232C LINK TO DISPLAY PANNEL (CN4) ........................................ 8
5. DIP SWITCH SETTING ................................................................... 9
5.1 C OMMAND TYPE SELECTION ............................................................ 9
5.2 B AUD RATE SELECTION ................................................................... 9
5.3 P ARITY CHECK SELECTION ............................................................... 9
5.4 I NTERNATIONAL CHARACTER SET SELECTION ..................................10
5.5 S ELF - TEST & DEMO FUNCTION SELECTION .......................................10
6. COMMAND ......................................................................................11
6.1 CD5220 S TANDARD M ODE C OMMAND L IST ....................................11
6.2 UTC STANDARD MODE COMMAND LIST ...........................................14
6.3 UTC ENHANCED MODE COMMAND LIST ...........................................14
6.4 AEDEX MODE COMMAND LIST .......................................................15
6.5 ADM787/788 MODE COMMAND LIST ...............................................15
6.6 DSP-800 MODE COMMAND LIST ......................................................16
6. 7 EPSON E SC / POS COMMAND LIST ...................................................17
7. CHARACTER SET...........................................................................20
7.1 USA, STANDARD CHARACTER SET (20 H – 7E H ) ................................20
7.2 I NTERNATION C HARACTER S ETS .....................................................21
7.3 P AGE 0 (PC437: USA, S TANDARD E UROPE ) (80H – FFH) ...............22
7.4 P AGE 1 (K ATAKANA ) (80H – FFH).................................................23
7.5 P AGE 2 (PC850: M ULTILINGUAL ) (80H – FFH) ..............................24
7.6 P AGE 3 (PC860: P ORTUGUESE ) (80H – FFH) ..................................25
7.7 P AGE 4 (PC863: C ANADIAN -F RENCH ) (80H – FFH) ........................26
7.8 P AGE 5 (PC865: N ORDIC ) (80H – FFH) ..........................................27
7.9 P AGE 6 (S LAVONIC ) (80H – FFH) ..................................................28
7.10 P AGE 7 (R USSIA ) (80H – FFH) .....................................................29
1
INDEX
1. FEATURES ....................................................................................... 3
2. GENERAL SPECIFICATIONS......................................................... 4
3. UNPACKING AND CHECKING THE PARTS................................. 5
4. INTERFACE ..................................................................................... 6
4.1 S PECIFICATIONS ............................................................................. 6
4.2 T HE COMMUNICATION FLOW ............................................................ 6
4.4 I NTERFACE CONNECTOR (O N THE BUTTOM OF THE BASE SECTION ) ..... 7
4.5 P OWER S UPPLY C ONNECTORS .......................................................... 7
4.6 RS232C LINK TO PC/HOST CONNECTOR (CN5) ............................... 8
4.7 RS232C LINK TO PRINTER CONNECTOR (CN3) .................................. 8
4.8 RS232C LINK TO DISPLAY PANNEL (CN4) ........................................ 8
5. DIP SWITCH SETTING ................................................................... 9
5.1 C OMMAND TYPE SELECTION ............................................................ 9
5.2 B AUD RATE SELECTION ................................................................... 9
5.3 P ARITY CHECK SELECTION ............................................................... 9
5.4 I NTERNATIONAL CHARACTER SET SELECTION ..................................10
5.5 S ELF - TEST & DEMO FUNCTION SELECTION .......................................10
6. COMMAND ......................................................................................11
6.1 CD5220 S TANDARD M ODE C OMMAND L IST ....................................11
6.2 UTC STANDARD MODE COMMAND LIST ...........................................14
6.3 UTC ENHANCED MODE COMMAND LIST ...........................................14
6.4 AEDEX MODE COMMAND LIST .......................................................15
6.5 ADM787/788 MODE COMMAND LIST ...............................................15
6.6 DSP-800 MODE COMMAND LIST ......................................................16
6. 7 EPSON E SC / POS COMMAND LIST ...................................................17
7. CHARACTER SET...........................................................................20
7.1 USA, STANDARD CHARACTER SET (20 H – 7E H ) ................................20
7.2 I NTERNATION C HARACTER S ETS .....................................................21
7.3 P AGE 0 (PC437: USA, S TANDARD E UROPE ) (80H – FFH) ...............22
7.4 P AGE 1 (K ATAKANA ) (80H – FFH).................................................23
7.5 P AGE 2 (PC850: M ULTILINGUAL ) (80H – FFH) ..............................24
7.6 P AGE 3 (PC860: P ORTUGUESE ) (80H – FFH) ..................................25
7.7 P AGE 4 (PC863: C ANADIAN -F RENCH ) (80H – FFH) ........................26
7.8 P AGE 5 (PC865: N ORDIC ) (80H – FFH) ..........................................27
7.9 P AGE 6 (S LAVONIC ) (80H – FFH) ..................................................28
7.10 P AGE 7 (R USSIA ) (80H – FFH) .....................................................29
WD-202A customer display
2
7.11 P AGE 19 (PC858 E URO ) (80H – FFH)...........................................30
7.12 P AGE 16 (WPC1252) (80H – FFH) ...............................................31
7.13 P AGE 12 (G REEK ) (80H – FFH)....................................................32
APPENDIX A: CUSTOMER DISPLAY DIMENSION ........................33
APPENDIX B: DISPLAY BASE DIMENSION ....................................33
APPENDIX C: DISPLAY MODULE DIMENSION .............................34
APPENDIX D: PASS THROUGH INSTALLATION GUIDE ..............35
2
7.11 P AGE 19 (PC858 E URO ) (80H – FFH)...........................................30
7.12 P AGE 16 (WPC1252) (80H – FFH) ...............................................31
7.13 P AGE 12 (G REEK ) (80H – FFH)....................................................32
APPENDIX A: CUSTOMER DISPLAY DIMENSION ........................33
APPENDIX B: DISPLAY BASE DIMENSION ....................................33
APPENDIX C: DISPLAY MODULE DIMENSION .............................34
APPENDIX D: PASS THROUGH INSTALLATION GUIDE ..............35
WD-202A customer display
3
1. FEATURES
1.) Data can be displayed on 20 columns x 2 lines.
2.) Blue-green color and large character are easy to eyes.
3.) The display panel is adjustable to provide the best view
angle.
4.) Provide 2 poles for bast position installation.
5.) The DIP-switches setting emulate commands mode, baud rate
and international characters.
6.) CD5220/UTC/EMAX/ADM/EscPOS/DSP-800 emulation
command sets.
7.) User-defined characters can be downloaded ( for EscPOS
/CD5220/DSP-800 command).
8.) Display area can be controlled by window function ( for
EscPOS command only).
9.) Provides an interface based on RS-232C, and RS232C baud
rate from 4800 to 38400 bps.
10.) Provides pass through function, so both printer and display
can be connected to the same port (ref. Appendix D).
11.) Multi power connectable and wide range power input (9 – 45
Vdc).
3
1. FEATURES
1.) Data can be displayed on 20 columns x 2 lines.
2.) Blue-green color and large character are easy to eyes.
3.) The display panel is adjustable to provide the best view
angle.
4.) Provide 2 poles for bast position installation.
5.) The DIP-switches setting emulate commands mode, baud rate
and international characters.
6.) CD5220/UTC/EMAX/ADM/EscPOS/DSP-800 emulation
command sets.
7.) User-defined characters can be downloaded ( for EscPOS
/CD5220/DSP-800 command).
8.) Display area can be controlled by window function ( for
EscPOS command only).
9.) Provides an interface based on RS-232C, and RS232C baud
rate from 4800 to 38400 bps.
10.) Provides pass through function, so both printer and display
can be connected to the same port (ref. Appendix D).
11.) Multi power connectable and wide range power input (9 – 45
Vdc).
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
Reklamë
Të lidhura
Customer Pole Display WD-202 User's Manual
WinPOS WD-2049 User Manual | AI Chat & PDF Download
DigiPos WD-2030 XXXX Vacuum Fluorescent Customer Display User's Manual
DigiPos WD-2030 User Manual
Epson CD5220, CD6220 User's Manual
CD 5220 / CD 6220 Customer Display User's Manual
AURES YUNO 151, YUNO 156 User Manual
P07303 Stand Alone VFD Pole Display User's Manual
Appostar CPD-3230 User Manual
