advertisement
Radio Basic Operation
1
Press the <
8
MENU> button.
2
Touch [Radio].
Ñ
Source control screen
5
1
2
4
3
1
Displays the information of the current station:
PS name, Frequency, PTY Genre, Indicator Items
[<<] [>>] :
Touch to the next frequency manually.
2
Recalls the memorized station.
When touched for 2 seconds, stores the current
3 receiving station in memory.
[
E
] [
F
] :
Tunes in a station with good reception automatically.
*
1
[TA] :
Traffic information mode is set.
*
2
*
3
[PTY] :
Select the available Program Type.
*
2
*
3
4
*1 If “AF” is set to ON on the Tuner screen, only RDS stations are received.
*2 FM only
*3 Europe, CIS sales area only
[
1
] :
Presets stations automatically.
5
[FM] :
Switches the FM band.
“FM1”, “FM2”, “FM3”
[AM] :
Switches the AM band.
“AM1”, “AM2”
Presetting stations
Ñ
Auto memory
You can preset 18 stations for FM and 12 stations for
AM.
1
Touch [FM] or [AM] to select the band.
2
Touch [
1
].
The local stations with the strongest signals are found and stored automatically.
• If “AF” is set to “ON” on the Tuner screen, only RDS
stations are stored in the memory.
Ñ
Manual memory
You can store the current receiving station in memory.
1
Tune in to a station you want to preset.
2
Touch and hold [#] (#:1-6) in which you want to store the station.
Ñ
Recalling the preset station
1
Touch [#] (#:1-6).
✎ NOTE
• Only frequencies are registered as preset stations.
Information about RDS stations is not registered.
FM RDS features
(Europe, CIS sales area only)
Ñ
Search by program type
1
Touch [PTY].
2
Select a program type from the list.
PTY Search starts.
Ñ
Traffic Information
1
Touch [TA].
Switches to the traffic information automatically when the traffic bulletin starts. (TA indicator lights up.)
“ON”, “OFF” (Default)
• If “AF” is set to “ON” on the Tuner screen, the station is
When the traffic bulletin starts
The Traffic Information screen appears automatically.
B5A-2245-00_KEQ_EnFrEsPt.indb 11
English | 11
Continued on the next page...
2017/09/07 13:46
Radio
Radio Setup
Ñ
Function menu
1
Press the <
8
MENU> button.
2
Touch [Setup].
RDS Clock Sync
Synchronizing the Radio Data System station time data and this unit’s clock.
“ON” (Default), “OFF”
AF *
2
When station reception is poor, automatically switches to the station that is broadcasting the same program over the same Radio Data System network.
“ON” (Default), “OFF”
*1 North America, South America sales area only
*2 Europe, CIS sales area only
5
Touch [
6
].
3
Touch [Radio].
4
Set each item as follows.
Area *
1
North America (Default):
For North/Central/South
America, AM/FM intervals: 10 kHz/200 kHz.
South America:
For some South American countries,
AM/FM intervals: 10 kHz/50 kHz.
Europe:
For Europe, AM/FM intervals: 9 kHz/50 kHz.
Stereo
Determines whether to receive stereo broadcasts in the stereo mode or monaural mode (the
MONO
indicator lights up).
“ON” (Default), “OFF”
Local
Tunes in only to the stations with sufficient signal strength. (
LOC
indicator lights up.)
“ON”, “OFF” (Default)
12
B5A-2245-00_KEQ_EnFrEsPt.indb 12 2017/09/07 13:46
advertisement