advertisement
3-2. Using the audio system
Setting station presets (excluding XM
®
Satellite Radio)
Search for desired stations by turning or or pressing “
” or “
” on .
Press and hold a button (from until you hear a beep.
Type B and C:
to or one of
Each time total of 6 pages.
is pressed, station pages are changed. There are a
)
Scanning radio stations (excluding XM
®
Satellite Radio)
■
Scanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press
■
Scanning all radio stations within range
again.
Press .
All the stations with reception will be played for 5 seconds each.
When the desired station is reached, press again.
302
3-2. Using the audio system
■
Displaying radio text messages (for type B and C, FM mode only)
When a new radio text message is received, “MSG” is shown on the display. To display the message, press .
If the text continues past the end of the display, “ ” is displayed. Press and hold until you hear a beep.
Text messages are not displayed while driving.
XM
®
Satellite Radio (if equipped)
■
Receiving XM
®
Satellite Radio
3
The display changes as follows each time pressed.
Type A
AM
SAT1
SAT2
SAT3
Type B and C
AM
FM
SAT
Turn or
or is
to select the desired channel in all the categories or press “
” or “
” on channel in the current category.
to select the desired
303
3-2. Using the audio system
■
Setting XM
®
Satellite Radio channel presets
Select the desired channel. Press and hold a button (from to or one of ) until you hear a beep.
Type B and C:
Each time is pressed, station pages are changed. There are a total of 6 pages.
■
Changing the channel category
Press “
” or “
” on .
■
Scanning XM
®
Satellite Radio channels
●
Scanning channels in the current category
Press .
again.
When the desired channel is reached, press
●
Scanning the preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press again.
304
3-2. Using the audio system
■
Displaying text information
Press .
Each time is pressed, the display changes in the following order:
Type A
Channel name
Title (song/program title)
Name (artist name/feature)
Channel number.
Type B and C
Title (song/program title)
Title (song/program title)
Name (artist name/ feature).
3
305
3-2. Using the audio system
■
When the battery is disconnected
All preset stations are erased. (type A only)
■
Reception sensitivity
●
Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM
®
Satellite Radio.
●
Maintaining perfect radio reception at all times is difficult due to the continually changing position of the antenna, differences in signal strength and surrounding objects, such as trains, transmitters, etc.
●
The radio antenna is mounted inside the rear quarter windows. To maintain clear radio reception, do not attach metallic window tinting or other metallic objects to the antenna wire mounted inside the rear quarter windows.
■
XM
®
Satellite Radio
An XM
®
Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous states and 10 Canadian provinces.
●
XM
®
subscriptions
For detailed information about XM
U.S.A.
®
Satellite Radio or to subscribe:
Visit on the web at www.xmradio.com or call 1-800-967-2346.
Canada
Visit on the web at www.xmradio.ca or call 1-877-438-9677.
●
Radio ID
You will need the radio ID when activating XM
®
service or reporting a problem. Select “CH000” using
or
, and the receiver’s
8-character ID number will appear.
●
Satellite tuner
The tuner supports only Audio Services (Music and Talk) and the accompanying Text Information of XM
®
Satellite Radio.
306
3-2. Using the audio system
■
If XM
®
Satellite Radio does not operate normally
If a problem occurs with the XM
®
tuner, a message will appear on the display. Refer to the table below to identify the problem, and take the suggested corrective action.
ANTENNA or
CHECK
ANTENNA
UPDATING
NO SIGNAL
LOADING
The XM
®
antenna is not connected. Check whether the XM
®
antenna cable is attached securely.
There is a short-circuit in the antenna or the surrounding antenna cable. See a Toyota certified dealer.
You have not subscribed to XM
®
Satellite Radio.
The radio is being updated with the latest encryption code. Contact XM
®
Satellite Radio for subscription information. When a contract is canceled, you can choose the “CH000” and all free-to-air channels.
The premium channel you selected is not authorized. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. If you want to listen to the premium channel, contact XM
®
Satellite Radio.
The XM
®
signal is too weak at the current location.
Wait until your vehicle reaches a location with a stronger signal.
The unit is acquiring audio or program information.
Wait until the unit has received the information.
OFF AIR or
CHANNEL OFF
AIR
The channel you selected is not broadcasting any programming. Select another channel.
-----
There is no song/program title or artist name/feature associated with the channel at this time. No action needed.
3
307
3-2. Using the audio system
---
The channel you selected is no longer available.
Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel.
Contact the XM
®
Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877-
438-9677 (Canada)
■
Certifications for the radio tuner
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following:
●
Reorienting or relocating the receiving antenna.
●
Increasing the separation between the equipment and receiver.
●
Connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
●
Consulting the dealer or an experienced radio/TV technician for help.
308
3-2. Using the audio system
Using the CD player
Type A
Power Volume
Random playback
Repeat play
Reverse
Fast-forward
CD eject
Selecting a track
Type B and C
Power Volume
Playback
Searching playback
Displaying text messages
Selector buttons
CD eject
CD load
(type B only)
3
Fast-forwarding and reversing/
Selecting a track
Selecting a track
Playback
Searching playback
Playback/pause
Displaying text messages
309
3-2. Using the audio system
Loading CDs
■
Loading a CD (type A and C)
Insert a CD.
■
Loading a CD (type B)
Press .
When the indicator on the slot turns from amber to green, insert a CD.
■
Loading multiple CDs (type B only)
Press and hold until you hear a beep.
When the indicator on the slot turns from amber to green, insert a CD.
The indicator on the slot turns to amber when the CD is inserted.
When the indicator on the slot turns from amber to green again, insert the next CD.
Repeat the procedure for the remaining CDs.
To cancel, press . If you do not insert a disc within 15 seconds, loading will be canceled automatically.
310
advertisement
Related manuals
advertisement