advertisement
3-3. Using the Bluetooth
®
audio system
Using the Bluetooth
®
audio system for the first time
Before using the Bluetooth
®
audio system, it is necessary to register a Bluetooth
®
enabled portable player in the system. Follow the procedure below to register (pair) a portable player:
Press until “BT AUDIO” is displayed.
Press that corresponds to “SETUP”.
The introductory guidance and portable player name registration instructions are heard.
Select “Pair Audio Player” using a voice command or
Register a portable player name by either of the following methods:
.
3 a. Select “Record Name” using , and say the name to be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.
Select “Confirm” using a voice command or .
A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard.
Input the passkey into the portable player.
Refer to the manual that comes with the portable player for the operation of the portable player.
Guidance for registration completion is heard.
If the portable player has a Bluetooth
®
phone, the phone can be registered at the same time. (
353
3-3. Using the Bluetooth
®
audio system
Menu list of the Bluetooth
®
audio system
■
Normal operation
First menu
Second menu
Third menu Operation detail
“Setup”
“BT
•
A
Setup”
“System
Setup”
“Pair Audio
Player”
“Select Audio
Player”
“Change Name”
“List Audio Players”
“Set Passkey”
“Delete Audio”
“Guidance Volume”
“Device Name”
Registering a portable player
Selecting a portable player to be used
Changing the registered name of a portable player
Listing the registered portable players
Changing the passkey
Deleting a registered portable player
Setting voice guidance volume
Displaying the Bluetooth
® device address and name
Initializing the system “Initialize”
“BT•A Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.
354
3-3. Using the Bluetooth
®
audio system
■
When using a voice command
For numbers, say a combination of single digits from zero to nine.
Say the command correctly and clearly.
■
The system may not recognize your voice in the following situations:
●
When driving on rough roads
●
When driving at high speeds
●
When air is blowing out of the vents onto the microphone
●
When the air conditioning fan emits a loud noise
■
Operations that cannot be performed while driving
●
Operating the system with
●
Registering a portable player to the system
■
Changing the passkey
3
355
3-3. Using the Bluetooth
®
audio system
Operating a Bluetooth
®
enabled portable player
Power Volume
Selecting an album
Selector buttons
Fast-forwarding and reversing/
Selecting a track
Selecting a track
Playback/pause
Displaying text messages
Playback
Selecting an album
Press “
” or “
” on
Selecting tracks
.
Turn track.
or press “
” or “
Playing and pausing tracks
” on
Press .
to select the desired
356
3-3. Using the Bluetooth
®
audio system
Fast-forwarding and reversing tracks
Press and hold “
” or “
” on .
Switching the display
Press .
Each time is pressed, the display changes in the following order:
Track title
Track title/Artist name
Track title/Album name
Track title/Elapsed time
3
Using the steering wheel audio switches
■
Bluetooth
®
audio system functions
Depending on the portable player that is connected to the system, certain functions may not be available.
■
Error messages
“BT AUDIO ERROR”: This indicates a problem in the system.
357
3-3. Using the Bluetooth
®
audio system
Setting up a Bluetooth
®
enabled portable player
Registering a portable player in the Bluetooth
®
audio system allows the system to function. The following functions can be used for registered portable players:
■
Functions and operation procedures
Press until “BT AUDIO” is displayed.
Press that corresponds to “SETUP”.
Select one of the following functions using a voice command or .
●
Registering a portable player
“Pair Audio Player”
●
Selecting a portable player to be used
“Select Audio Player”
●
Changing the registered name
“Change Name”
●
Listing the registered portable players
“List Audio Players”
●
Changing the passkey
“Set Passkey”
●
Deleting a registered portable player
“Delete Audio Player (Delete Audio)”
Registering a portable player
Select “Pair Audio Player” using a voice command or , and perform the procedure for registering a portable player. (
358
advertisement
Related manuals
advertisement