For Ad-hoc mode. Brother IEEE 802.11b, MFC-490CW, Version B, MFC-5490CN, G, MFC-6890CDW, MFC-790CW, MFC-990CW, DCP-585CW, MFC-6490CW

Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)

For Ad-hoc mode

a

Confirm your network environment. (See page 23.)

„ Ad-hoc mode

Connected to a wireless capable computer without an access point or

„ Infrastructure mode

See page 21.

Connected to a computer with an access point

3

3 b

Confirm your wireless network setup method. (See page 24.)

Using the Setup Wizard from the control panel

(Recommended)

Using the Brother installer

application c

Configure your machine for a wireless network. (See page 27.)

See page 27.

For Windows

®

(See page 50.)

For Macintosh

®

(See page 69.)

Installing drivers and software (See the Quick Setup Guide.)

Wireless configuration and installing drivers and software have been completed.

22