Function table and default factory settings. Brother IEEE 802.11b, MFC-490CW, Version B, MFC-5490CN, G, MFC-6890CDW, MFC-790CW, MFC-990CW, DCP-585CW, MFC-6490CW
Add to My manuals199 Pages
advertisement
Appendix B
Function table and default factory settings
For MFC-5490CN
Level1 Level2
5.Network 1.Setup TCP/
IP
Level3 Options
1.BOOT Method Auto/Static/RARP/BOOTP/DHCP
2.IP Address [000-255].[000-255].[000-255].[000-255].
3.Subnet Mask [000-255].[000-255].[000-255].[000-255].
4.Gateway
5.Node Name
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
BRNxxxxxxxxxxxxx= (your machine’s Ethernet address)
(up to 15 characters)
0.Factory Reset
6.WINS Config Auto/Static
7.WINS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
[000].[000].[000].[000]
8.DNS Server Primary/Secondary
[000-255].[000-255].[000-255].[000-255].
9.APIPA
0.IPv6
2.Setup Misc. 1.Ethernet
[000].[000].[000].[000]
On/Off
On/Off
Auto/100B-FD/100B-HD/10B-FD/10B-HD
B
B
B
174
Appendix B
For other machines
Level1 Level2
Network Wired LAN
Level3
TCP/IP
Options1
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS Config
WINS Server
DNS Server
APIPA
IPv6
(MFC-5890CN,
MFC-6490CW,
DCP-6690CW and
MFC-6890CDW only)
Ethernet Auto/100B-FD/100B-
HD/10B-FD/10B-HD
Options2
Auto/Static/RARP/BOOTP/DHCP
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
BRNXXXXXXXXXXXX= (your Ethernet address)
(up to 15 characters)
BRNXXXXXXXXXXXX*
Auto/Static
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
On/Off
On/Off
B
B
175
Level1
Network
(Continued)
Level2
WLAN
Appendix B
Level3
TCP/IP
Options1
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS Config
WINS Server
DNS Server
APIPA
IPv6
(MFC-5890CN,
MFC-6490CW,
DCP-6690CW and
MFC-6890CDW only)
Setup Wizard —
SES/WPS/
AOSS
—
WPS w/PIN
Code
—
WLAN Status Status
Signal
SSID
Comm. Mode
Options2
Auto/Static/RARP/BOOTP/DHCP
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
BRWXXXXXXXXXXXX= (your Ethernet address)
(up to 15 characters)
BRWXXXXXXXXXXXX*
Auto/Static
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
Primary/Secondary
[000-255].[000-255].
[000-255].[000-255].
[000].[000].[000].[000]
On/Off
On/Off
(Choose SSID from list or manually add
SSID)
Active(11b)/Active(11g)/
Connection Failed
Strong/Medium/Weak/None
(Shows SSID with up to 32 digits)
Ad-hoc/Infrastructure
B
176
Level1
Network
(Continued)
Level2
E-mail/IFAX
(MFC-6490CW and
MFC-6890CDW only)
Level3 Options1
Mail Address —
Setup Server SMTP Server
Options2
SMTP Port
Auth. for SMTP
POP3 Server
Setup Mail
RX
POP3 Port
Mailbox Name
Mailbox Pwd
APOP
Auto Polling
Poll Frequency
(MFC-6490CW only)
Header
Del Error Mail
Notification
Sender Subject Setup Mail
TX
Size Limit
Notification
Setup Relay Rly Broadcast
Relay Domain
Relay Report
Name
(Up to 30 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255].
[0001-65535]
None/SMTP-AUTH/POP bef.SMTP
Name
(Up to 30 characters)
IP Address
[000-255].[000-255].
[000-255].[000-255].
[00001-65535]
—
—
On/Off
On/Off
10 Min(s)
All/Subject+From+To/None
On/Off
On/MDN/Off
—
On/Off
On/Off
On/Off
Relayxx
On/Off
Appendix B
B
177
Appendix B
1
2
Level1
Network
(Continued)
Level2
Scan to FTP
(MFC
MFC
5890CN,
6490CW and
MFC-6890CDW only)
Time Zone
Level3 Options1
Passive Mode On/Off
Port Number 21
File Name1 —
File Name2 —
Setup Profile Not Registered
Not Registered
Not Registered
Not Registered
Not Registered
UTC xxxx:xx
Network I/F Wired LAN
/WLAN
LDAP
On/Off
(MFC-6890CDW only)
Factory Reset Yes/No
The factory settings are shown in bold.
Options2
[00001-65535]
(Up to 15 characters)
(Up to 15 characters)
(Up to 30 characters)
(Up to 30 characters)
(Up to 30 characters)
(Up to 30 characters)
(Up to 30 characters)
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
The LDAP protocol is not supported for China.
178
B
advertisement
Key Features
- Home & office Inkjet Colour printing
- 6000 x 1200 DPI
- 33 ppm
- Mono copying Colour scanning Colour faxing
- USB port Wi-Fi
- Internal memory: 48 MB
- 8.5 kg
Related manuals
advertisement
Table of contents
- 11 Overview
- 12 Network features
- 12 Network printing
- 12 Network scanning
- 12 Network PC-FAX (Not available for DCP models)
- 12 Network PhotoCapture Center
- 13 Management utilities
- 13 MFC-6890CDW: standard, MFC-5890CN: available as a download)
- 14 Types of Network Connections
- 14 Wired network connection example
- 16 Wireless network connection examples
- 17 Protocols
- 17 TCP/IP protocols and functions
- 18 Other Protocol
- 19 Overview
- 19 IP addresses, subnet masks and gateways
- 19 IP address
- 20 Subnet mask
- 20 Gateway (and router)
- 21 Step by step chart
- 22 Setting up the IP address and subnet mask
- 22 Using the BRAdmin Light utility to configure your machine as a network printer
- 24 Using the control panel to configure your machine for a network
- 24 Using other methods to configure your machine for a network
- 25 Changing the print server settings
- 25 Using the BRAdmin Light utility to change the print server settings
- 27 Using the Remote Setup to change the print server settings (Not available for DCP models)
- 27 Using the control panel to change the print server settings
- 28 Overview
- 29 Wireless network terms and concepts
- 29 SSID (Service Set Identifier) and channels
- 29 Authentication and encryption
- 31 Step by step chart for wireless network configuration
- 31 For Infrastructure mode
- 32 For Ad-hoc mode
- 33 Confirm your network environment
- 33 Connected to a computer with an access point in the network (Infrastructure mode)
- 33 (Ad-hoc mode)
- 34 Confirm your wireless network setup method
- 34 network machine
- 34 Configuration using the SES/WPS/AOSS control panel menu (Infrastructure mode only)
- 35 Configuration using the PIN Method of Wi-Fi Protected Setup™ (Infrastructure mode only)
- 36 network machine
- 37 Configuring your machine for a wireless network
- 37 Using the Setup Wizard from the control panel
- 41 network
- 45 Using the PIN Method of Wi-Fi Protected Setup
- 47 for a wireless network
- 48 Configuration in Infrastructure mode
- 48 Before configuring the wireless settings
- 49 Configure the wireless settings
- 55 Configuration using the SES/WPS/AOSS control panel menu (One-Push method)
- 55 Before configuring the wireless settings
- 55 Configure the wireless settings
- 60 Configuration in Ad-hoc Mode
- 60 Before configuring the wireless settings
- 60 Configure the wireless settings
- 68 Configuration in Infrastructure mode
- 68 Before configuring the wireless settings
- 69 Configure the wireless settings
- 75 Configuration using the SES/WPS/AOSS control panel menu (One-Push method)
- 75 Before configuring the wireless settings
- 75 Configure the wireless settings
- 79 Configuration in Ad-hoc Mode
- 79 Before configuring the wireless settings
- 79 Configure the wireless settings
- 86 Network menu
- 86 TCP/IP
- 99 Setup Misc. (MFC-5490CN only)
- 99 Setup Wizard (wireless network only)
- 99 SES/WPS/AOSS (wireless network only)
- 99 WPS w/PIN code (wireless network only)
- 100 WLAN Status (wireless network only)
- 104 Ethernet (wired network only)
- 105 E-mail/I-FAX (For MFC-6490CW and MFC-6890CDW)
- 125 Scan to FTP (For MFC-5890CN and MFC-6490CW)
- 129 Scan to FTP (For MFC-6890CDW)
- 132 Time Zone (For MFC-6490CW and MFC-6890CDW)
- 133 Network I/F (Not available for MFC-5490CN and MFC-5890CN)
- 133 LDAP (For MFC-6890CDW)
- 134 Restoring the network settings to factory default
- 135 Printing the Network Configuration List
- 136 Overview
- 136 Connection methods
- 136 Peer-to-Peer
- 137 Network Shared
- 137 How to install the Driver Deployment Wizard software
- 138 Using the Driver Deployment Wizard software
- 141 Overview
- 142 Configuring the standard TCP/IP port
- 142 Printer driver not yet installed
- 142 Printer driver already installed
- 143 Other sources of information
- 144 Overview
- 144 How to choose the print server (TCP/IP)
- 147 Changing the print server settings
- 147 Changing the configuration using the Remote Setup (Not available for DCP models)
- 147 Using the BRAdmin Light utility to change the print server settings
- 147 Other sources of information
- 148 Overview
- 150 LDAP operation using the control panel
- 151 Internet fax overview
- 151 Getting connected
- 152 Control panel key functions
- 153 Sending an Internet fax
- 153 Manually entering text
- 154 Receiving E-mail or Internet fax
- 154 Receiving an Internet fax to your computer
- 154 Forwarding received E-mail and fax messages
- 155 Relay broadcasting
- 158 TX Verification Mail
- 158 Setup Mail TX
- 158 Setup Mail RX
- 158 Error mail
- 159 Important information on Internet fax
- 160 Scan to E-mail Server overview (MFC-6490CW and MFC-6890CDW)
- 163 Overview
- 163 Security methods for E-mail notification
- 163 POP before SMTP (PbS)
- 163 SMTP-AUTH (SMTP Authentication)
- 163 APOP (Authenticated Post Office Protocol)
- 164 Using E-mail notification with user authentication
- 165 Overview
- 165 General problems
- 167 Network print software installation problems
- 169 Printing problems
- 170 Scanning and PC Fax problems
- 172 Wireless network troubleshooting
- 172 Wireless setup problems
- 172 Wireless connection problem
- 173 LDAP troubleshooting
- 174 Using services
- 174 Other ways to set the IP address (for advanced users and administrators)
- 174 Using DHCP to configure the IP address
- 175 Using BOOTP to configure the IP address
- 176 Using RARP to configure the IP address
- 176 Using APIPA to configure the IP address
- 177 Using ARP to configure the IP address
- 178 Using the TELNET console to configure the IP address
- 179 Installation when using a Network Print Queue or Share (printer driver only)
- 180 users)
- 181 Print server specifications
- 181 Ethernet wired network
- 182 Ethernet wireless network
- 184 Function table and default factory settings
- 189 Entering Text
- 189 For Touchscreen models
- 190 For MFC models
- 191 For DCP models
- 192 Open Source Licensing Remarks
- 192 This product includes SNMP software from WestHawk Ltd
- 193 OpenSSL statements
- 195 OpenLDAP Statements