5.22 Processor. HP Pavilion dv6100 Entertainment Notebook PC series, Dv6426ca - Pavilion - Core Duo 2 GHz
Add to My manuals278 Pages
advertisement
Removal and Replacement Procedures
5.22 Processor
Processor Spare Part Number Information
Intel Core Duo T7200 (2.00-GHz)
Intel Core Duo T1350 (1.86-GHz)
Intel Core Duo T5600 (1.83-GHz)
Intel Core Duo T5200 (1.66-GHz), use with dv6200
Intel Core Duo T2350 (1.60-GHz), use with dv6200
Intel Core Duo T2250 (1.73-GHz)
Intel Core Duo T5500 (1.66-GHz)
Intel Core Duo T2300E (1.66-GHz)
Intel Core Duo T2060 (1.60-GHz), use with dv6200
Intel Core Duo T2050 (1.60-GHz)
Intel Celeron 440 (1.86-GHz), use with dv6200
Intel Celeron 430 (1.73-GHz)
Intel Celeron 420 (1.60-GHz)
AMD Turion ML-60 (2.0-GHz)
AMD Turion ML-56 (1.8-GHz)
AMD Turion ML-52 (1.6-GHz)
AMD Turion ML-50 (1.6-GHz)
Mobile AMD Sempron 3500+ (1.80-GHz)
Mobile AMD Sempron 3400+ (1.80-GHz)
Mobile AMD Sempron 3200+ (1.60-GHz)
434730-001
430896-001
434731-001
436900-001
441762-001
430897-001
436157-001
419437-001
441763-001
430898-001
441761-001
436159-001
434735-001
436257-001
431373-001
431372-001
431371-001
434414-001
431375-001
431374-001
1. Prepare the computer for disassembly (
remove the following components:
❏
❏
❏
❏
❏
Keyboard (
Speaker assembly (
)
Maintenance and Service Guide 5–69
Removal and Replacement Procedures
❏
❏
❏
❏
❏
Display assembly (
Top cover (
Audio board (
)
)
)
2. Turn the processor locking screw 1 one-half turn counterclockwise until you hear a click.
3. Lift the processor 2 straight up and remove it.
✎
The gold triangle 3 on the processor should be aligned with the triangle icon 4 embossed on the processor socket when you install the processor.
5–70
Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
Computer
Dimensions
Length
Width
Height (varies front to rear)
Weight (varies by configuration)
Stand-alone power requirements
35.7 cm
25.7 cm
4.1 cm
2.7 kg
14.05 in
10.12 in
1.57 in
5.8 lb
Operating voltage
Operating current
Temperature
Operating
Nonoperating
18.5 V dc —19.0 V dc
3.5 A or 4.74 A
Operating*
Nonoperating
Relative humidity (noncondensing)
5°C to 35°C
-20°C to 60°C
41°F to 95°F
-4°F to 140°F
10% to 90%
5% to 95%, 38.7°C (101.6°F) maximum wet bulb temperature
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Maintenance and Service Guide 6–1
Specifications
Table 6-1
Computer (Continued)
Shock
Operating
Nonoperating
Random Vibration
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Operating
Nonoperating
0.75 g zero-to-peak, 10 Hz to 500 Hz,
0.25 oct/min sweep rate
1.50 g zero-to-peak, 10 Hz to 500 Hz,
0.5 oct/min sweep rate
*Applicable product safety standards specify thermal limits for plastic surfaces.
The computer operates well within this range of temperatures.
6–2 Maintenance and Service Guide
Specifications
Table 6-2
15.4-inch, WXGA, SVA Display
Dimensions
Height
Width
Diagonal
Number of colors
Contrast ratio
Brightness
Pixel resolution
Pitch
Format
Configuration
Backlight
Character display
Total power consumption
Viewing angle
20.7 cm
33.1 cm
39.1 cm
Up to 16.8 million
200:1
160 nits typical
8.15 in
13.03 in
15.39 in
0.259 × 0.259 mm
1280 × 800
RGB vertical stripe
Edge lit
80 × 25
4 W
+/-65° horizontal, +/-50° vertical typical
Maintenance and Service Guide 6–3
Specifications
Table 6-3
Hard Drives
200-GB* 160-GB*
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks
†
Disk rotational speed
9.5 mm
70 mm
99 g
ATA-7
150 MB/sec
ATA security
2 ms
12ms
22 ms
390,721,968
4200 rpm
9.5 mm
70 mm
102 g
ATA-7
150 MB/sec
ATA security
2 ms
12 ms
21 ms
312,581,808
5400 rpm
Operating temperature 0°C to 60°C
(32°F to 140°F)
5°C to 60°C
(41°F to 140°F)
✎
Certain restrictions and exclusions apply. For details, consult technical support by selecting Start > Help and Support > Contact support.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications may differ slightly.
6–4 Maintenance and Service Guide
Specifications
Table 6-3
Hard Drives (Continued)
120-GB* 100-GB*
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks
†
9.5 mm
70 mm
102 g
ATA-5
100 MB/sec
ATA security
3 ms
13 ms
24 ms
234,433,260
9.5 mm
70 mm
102 g
ATA-5
100 MB/sec
ATA security
3 ms
13 ms
24 ms
195,364,233
Disk rotational speed 5400 rpm
Operating temperature 5°C to 55°C (41°F to 131°F)
✎
Certain restrictions and exclusions apply. For details, consult technical support by selecting Start > Help and Support > Contact support.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications may differ slightly.
Maintenance and Service Guide 6–5
Specifications
Table 6-3
Hard Drives (Continued)
80-GB* 60-GB*
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous (maximum)
Security
Seek times (typical read, including setting)
Single track
Average
Maximum
Logical blocks
†
9.5 mm
70 mm
99 g
ATA-5
100 MB/sec
ATA security
3 ms
13 ms
24 ms
156,301,488
9.5 mm
70 mm
99 g
ATA-5
100 MB/sec
ATA security
3 ms
13 ms
24 ms
117,210,240
Disk rotational speed 5400 rpm
Operating temperature 5°C to 55°C (41°F to 131°F)
✎
Certain restrictions and exclusions apply. For details, consult technical support by selecting Start > Help and Support > Contact support.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Accessible capacity is less. Actual drive specifications may differ slightly.
6–6 Maintenance and Service Guide
Specifications
Dimensions
Height
Width
Depth
Weight
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
Temperature
Operating
Nonoperating
Table 6-4
Primary 6-cell, Li-Ion Battery
2.00 cm
9.40 cm
13.40 cm
0.34 kg
11.1 V
4.4 Ah
48 Wh
5°C to 45°C
0°C to 60°C
0.79 in
3.70 in
5.28 in
0.75 lb
41°F to 113°F
32°F to 140°F
Maintenance and Service Guide 6–7
Specifications
Applicable disc
Center hole diameter
Disc diameter
Standard disc
Mini disc
Table 6-5
DVD/CD-RW Combo Drive
Read:
DVD-R, DVD-RW,
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and multisession)
CD-Bridge
1.5 cm (0.59 in)
Write:
CD-R and CD-RW
12 cm (4.72 in)
8 cm (3.15 in)
6–8 Maintenance and Service Guide
Specifications
Table 6-5
DVD/CD-RW Combo Drive (Continued)
Disc thickness
Track pitch
Access time
Random
Full stroke
Audio output level
Cache buffer
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
Startup time
Stop time
1.2 mm (0.047 in)
0.74 µm
CD media
< 110 ms
< 210 ms
Line-out, 0.7 V rms
2 MB
DVD media
< 130 ms
< 225 ms
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
< 15 seconds
< 6 seconds
Maintenance and Service Guide 6–9
Specifications
Applicable disc
Table 6-6
DVD±RW/R and
CD-RW Double-Layer Combo Drive
Read:
DVD-R, DVD-RW,
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and multisession)
CD-Bridge
Write:
CD-R and CD-RW
DVD-R and DVD-RW
1.5 cm (0.59 in) Center hole diameter
Disc diameter
Standard disc
Mini disc
12 cm (4.72 in)
8 cm (3.15 in)
6–10 Maintenance and Service Guide
Specifications
Table 6-6
DVD±RW/R and
CD-RW Double-Layer Combo Drive (Continued)
Disc thickness
Track pitch
Access time
Random
Full stroke
Audio output level
Cache buffer
Data transfer rate
CD-R (16X)
CD-RW (8X)
CD-ROM (24X)
DVD (8X)
DVD-R (4X)
DVD-RW (2X)
Multiword DMA mode 2
Startup time
Stop time
1.2 mm (0.047 in)
0.74 µm
CD media
< 175 ms
< 285 ms
Audio-out, 0.7 Vrms
2 MB
DVD media
< 230 ms
< 335 ms
2,400 KB/s (150 KB/s at 1X CD rate)
1,200 KB/s (150 KB/s at 1X CD rate)
3,600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
5,400 KB/s (1,352 KB/s at 1X DVD rate)
2,700 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
< 15 seconds
< 6 seconds
Maintenance and Service Guide 6–11
Specifications
Hardware DMA
DMA0
DMA1
DMA2
DMA3
DMA4
DMA5
DMA6
DMA7
Table 6-7
System DMA
System Function
Not applicable
Not applicable
Not applicable
Not applicable
Direct memory access controller
Available for ExpressCard
Not assigned
Not assigned
6–12 Maintenance and Service Guide
Specifications
Table 6-8
System Interrupts
Hardware IRQ
IRQ0
IRQ1
IRQ2
IRQ3
IRQ4
IRQ5*
IRQ6
IRQ7*
IRQ8
IRQ9*
IRQ10*
System Function
System timer
Quick Launch buttons
Cascaded
USB2 Enhanced Host Controller—24CD
COM1
Conexant AC—Link Audio
SMBus Controller—24C3
Data Fax Modem with SmartCP
Diskette drive
Parallel port
System CMOS/real-time clock
Microsoft ACPI-compliant system
USB UHCI controller—24C2
GM/GME Graphic Controller
Realtek RTL8139 Family PCI fast Ethernet Controller
IRQ11 USB EHCI controller—24CD
USB UHCI controller—24C4
USB UHCI controller—24C7
Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
*Default configuration
✎
ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20.
Maintenance and Service Guide 6–13
Specifications
Table 6-8
System Interrupts (Continued)
IRQ17
IRQ19
IRQ19
IRQ19
IRQ20
IRQ20
Hardware IRQ
IRQ12
IRQ13
IRQ14
IRQ15
IRQ17
IRQ17
IRQ21
IRQ21
IRQ21
IRQ22
System Function
Synaptics PS/2 port pointing device
Numeric data processor
Primary IDE channel
Secondary IDE channel
Conexant AC -Link Audio
Soft V90 Data Fax Modem with SmartCP
ATi Mobility Radeon Xpress 200 Series
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
TI 6411 PCIxx21/x515 Cardbus Controller
TI OHCI Compliant IEEE 1394 Host Controller
TI Integrated PCIxx21 FlashMedia Controller
Broadcom 802.11b/g WLAN
Microsoft ACPI-compliant system
Realtek RTL8100CL Family PCI fast Ethernet
Controller
IRQ23 SDA Standard Compliant SD Host Controller
*Default configuration
✎
ExpressCard may assert IRQ3, IRQ4, IRQ5, IRQ7, or IRQ20.
6–14 Maintenance and Service Guide
Specifications
I/O Address (hex)
0x00000000-0x00000CF7
0x00000000-0x00000CF7
0x00000020-0x00000021
0x0000002E-0x0000002F
0x00000040-0x00000043
0x00000060-0x00000060
0x00000061-0x00000061
0x00000062-0x00000062
0x00000064-0x00000064
0x00000066-0x00000066
0x00000070-0x00000071
0x00000072-0x00000073
0x00000080-0x0000008F
0x00000092-0x00000092
0x000000A0-0x000000A1
0x000000B0-0x000000B1
0x000000C0-0x000000DF
0x000000F0-0x000000FE
0x00000170-0x00000177
Table 6-9
System I/O Addresses
System Function (shipping configuration)
PCI bus
Direct memory access controller
Programmable interrupt controller
System board resources
System timer
Quick Launch Buttons
System speaker
Microsoft ACPI-Compliant Embedded
Controller
Quick Launch Buttons
Microsoft ACPI-Compliant Embedded
Controller
System CMOS/real time clock
System board resources
Direct memory access controller
System board resources
Programmable interrupt controller
System board resources
Direct memory access controller
Numeric data processor
Secondary IDE Channel
Maintenance and Service Guide 6–15
Specifications
Table 6-9
System I/O Addresses (Continued)
I/O Address (hex)
0x000001F0-0x000001F7
0x00000220-0x0000022F
0x00000274-0x00000277
0x00000279-0x00000279
0x00000280-0x00000293
0x00000376-0x00000376
0x000003B0-0x000003BB
0x000003B0-0x000003BB
0x000003C0-0x000003DF
0x000003C0-0x000003DF
0x000003F6-0x000003F6
0x0000040B-0x0000040B
0x000004D0-0x000004D1
0x000004D6-0x000004D6
0x00000530-0x00000537
0x00000870-0x0000087F
0x00000A79-0x00000A79
0x00000C00-0x00000C01
0x00000C14-0x00000C14
0x00000C50-0x00000C52
0x00000C6C-0x00000C6C
System Function (shipping configuration)
Primary IDE Channel
System board resources
ISAPNP Read Data Port
ISAPNP Read Data Port
System board resources
Secondary IDE Channel
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
Primary IDE Channel
System board resources
System board resources
System board resources
System board resources
System board resources
ISAPNP Read Data Port
System board resources
System board resources
System board resources
System board resources
6–16 Maintenance and Service Guide
Specifications
Table 6-9
System I/O Addresses (Continued)
I/O Address (hex)
0x00000C6F-0x00000C6F
0x00000CD4-0x00000CD5
0x00000CD6-0x00000CD7
0x00000CD8-0x00000CDF
0x00000D00-0x0000FFFF
0x00000F40-0x00000F47
0x00001080-0x00001080
0x00008000-0x0000805F
0x00008100-0x000081FF
0x00008400-0x0000840F
0x00008410-0x0000841F
0x00009000-0x00009FFF
0x00009000-0x00009FFF
0x0000A000-0x0000A0FF
0x0000F000-0x0000FFFF
0x0000FD00-0x0000FDFF
0x0000FE00-0x0000FEFF
System Function (shipping configuration)
System board resources
System board resources
System board resources
System board resources
PCI bus
System board resources
System board resources
System board resources
System board resources
ATI SMBus
Standard Dual Channel PCI IDE Controller
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
Realtek RTL8139/810x Family Fast Ethernet
NIC
PCI standard PCI-to-PCI bridge
Texas Instruments PCIxx21/x515 Cardbus
Controller
Texas Instruments PCIxx21/x515 Cardbus
Controller
Maintenance and Service Guide 6–17
Specifications
Memory Map Address (hex)
0xD4100000-0xD41FFFFF
0xD4100000-0xD41FFFFF
0xD8000000-0xDBFFFFFF
0xD8000000-0xDBFFFFFF
0xFAC00000-0xFEBFFFFF
0xF6C00000-0xFABFFFFF
0xD4000000-0xD4000FFF
0xD4001000-0xD4001FFF
0xD4002000-0xD4002FFF
0xD4003000-0xD40033FF
0xFFF80000-0xFFFFFFFF
0xE0000000-0xE03FFFFF
0xE0000000-0xE03FFFFF
0x0000-0x0FFF
0xD4208000-0xD42087FF
0xD4200000-0xD4203FFF
0xD4204000-0xD4205FFF
0xFFEFF000-0xFFEFFFFF
Table 6-10
System Memory Map
0xFFEFE000-0xFFEFEFFF
System Function (shipping configuration)
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
PCI standard PCI-to-PCI bridge
PCI standard PCI-to-PCI bridge
Standard OpenHCD USB Host Controller
Standard OpenHCD USB Host Controller
Standard Enhanced PCI to USB Host
Controller
ATI SMBus
System board
System board
System board resources
System board
Texas Instruments OHCI Compliant IEEE
1394 Host Controller
Texas Instruments OHCI Compliant IEEE
1394 Host Controller
Broadcom 802.11b/g WLAN
Texas Instruments PCIxx21/x515 Cardbus
Controller
Texas Instruments PCIxx21/x515 Cardbus
Controller
6–18 Maintenance and Service Guide
Specifications
Table 6-10
System Memory Map (Continued)
Memory Map Address (hex)
0xF2C00000-0xF6BFFFFF
0xD4206000-0xD4207FFF
0xD4209000-0xD42090FF
0xD4208C00-0xD4208CFF
0xD4208800-0xD42088FF
0xD4209400-0xD42094FF
0xD4003400-0xD40034FF
0xD4003800-0xD40038FF
0xFEC00000-0xFEC00FFF
0xFEE00000-0xFEE00FFF
0xA0000-0xBFFFF
0xA0000-0xBFFFF
0xA0000-0xBFFFF
0xD6000-0xD7FFF
0xDC000-0xDDFFF
0xDD000-0xDDFFF
0xE0000-0xFFFFF
0x40000000-0xFFFFFFFF
System Function (shipping configuration)
Texas Instruments PCIxx21/x515 Cardbus
Controller
Texas Instruments PCIxx21 Integrated
FlashMedia Controller
SDA Standard Compliant SD Host Controller
SDA Standard Compliant SD Host Controller
SDA Standard Compliant SD Host Controller
Realtek RTL8139/810x Family Fast
Ethernet NIC
Conexant AC-Link Audio
SoftV90 Data Fax Modem with SmartCP
System board resources
System board resources
PCI bus
PCI standard PCI-to-PCI bridge
ATI MOBILITY RADEON Xpress 200 Series
PCI bus
PCI bus
Texas Instruments PCIxx21/x515 Cardbus
Controller
System board
PCI bus
Maintenance and Service Guide 6–19
A
Screw Listing
This appendix provides specification and reference information for the screws used in the computer.
The four Phillips PM3.0×3.0 screws (Table A-1) used to secure the hard drive bracket to the hard drive.
The remainder of the screws listed in this appendix are available in the Screw Kit, spare part number 434747-001, and the Display
Screw Kit, spare part number 431400-001.
Maintenance and Service Guide A–1
Screw Listing
Table A-1
Phillips PM3.0×3.0 Screw mm
Color
Silver
Qty.
6
Length
3.0 mm
Thread
3.0 mm
Head
Width
5.0 mm
Where used:
6 screws that secure the hard drive bracket to the hard drive (documented in
)
A–2
Phillips PM3.0×3.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-2
Phillips PM2.0×5.0 Captive Screw mm
Color
Black
Qty.
Length
4 5.0 mm
Thread
2.0 mm
Head
Width
5.0 mm
Where used:
1 Two screws that secure the hard drive cover to the computer (screws are
captured on the cover by C-clips; documented in Section 5.4
2
Two screws that secure the memory module compartment cover to the computer (screws are captured on the cover by C-clips; documented in
)
Phillips PM2.0×5.0 Captive Screw Locations
Maintenance and Service Guide A–3
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw mm
Color
Silver
Qty.
27
Length
5.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
2 screws that secure the Mini Card module to the computer (documented in
)
A–4
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw (Continued) mm
Color
Silver
Qty.
27
Length
5.0 mm
Thread
2.5 mm
Where used:
3 screws that secure the top cover to the base enclosure (documented in
Head
Width
5.0 mm
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide A–5
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw (Continued) mm
Color
Silver
Qty.
27
Length
5.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
4 screws that secure the display bezel to the display enclosure (documented in
A–6
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw (Continued) mm
Color
Silver
Qty.
27
Length
5.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
4 screws that secure the display panel to the display enclosure (documented in
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide A–7
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw (Continued) mm
Color
Silver
Qty.
Length
27 5.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
1 Two screws that secure the audio board to the computer (documented in
2
Four screws that secure the ExpressCard assembly to the system board
(documented in
3
Two screws that secure the USB/power connector board to the computer
(documented in
4
Two screws that secure the system board to the computer (documented in
A–8
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-3
Phillips PM2.5×5.0 Screw (Continued) mm
Color
Silver
Qty.
27
Length
5.0 mm
Thread
2.5 mm
Where used:
Four screws that secure the fan/heat sink assembly to the system board
(documented in
Head
Width
5.0 mm
Phillips PM2.5×5.0 Screw Locations
Maintenance and Service Guide A–9
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw mm
Color
Black
Qty.
Length
26 7.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
1 One screw that secures the optical drive to the computer (documented in
)
2
Four screws that secure the keyboard to the computer (documented in
3
Two screws that secure the display assembly to the computer (documented
)
A–10
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw (Continued) mm
Color
Black
Qty.
26
Length
7.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
2 screws that secure the display assembly to the computer (documented in
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide A–11
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw (Continued) mm
Color
Black
Qty.
26
Length
7.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
2 screws that secure the display bezel to the display assembly (documented in
A–12
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw (Continued) mm
Color
Black
Qty.
26
Length
7.0 mm
Thread
2.5 mm
Where used:
9 screws that secure the top cover to the computer (documented in
Head
Width
5.0 mm
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide A–13
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw (Continued) mm
Color
Black
Qty.
26
Length
7.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
3 screws that secure the top cover support trim to the computer (documented in
A–14
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-4
Phillips PM2.5×7.0 Screw (Continued) mm
Color
Black
Qty.
Length
26 7.0 mm
Thread
2.5 mm
Where used:
1 One screw that secures the top cover support trim to the computer
(documented in
2
Two screws that secure the top cover to the computer (documented in
Head
Width
5.0 mm
Phillips PM2.5×7.0 Screw Locations
Maintenance and Service Guide A–15
Screw Listing
Table A-5
Phillips PM2.0×3.0 Screw mm
Color
Silver
Qty.
10
Length
3.0 mm
Thread
2.0 mm
Head
Width
4.0 mm
Where used:
2 screws that secure the optical drive bracket to the optical drive (documented in
)
A–16
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-5
Phillips PM2.0×3.0 Screw (Continued) mm
Color
Silver
Qty.
10
Length
3.0 mm
Thread
2.0 mm
Head
Width
4.0 mm
Where used:
2 screws that secure the power button board to the computer (documented in
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide A–17
Screw Listing
Table A-5
Phillips PM2.0×3.0 Screw (Continued) mm
Color
Silver
Qty.
10
Length
3.0 mm
Thread
2.0 mm
Head
Width
4.0 mm
Where used:
4 screws that secure the display hinges to the display panel (documented in
Phillips PM2.0×3.0 Screw Location
A–18 Maintenance and Service Guide
Screw Listing
Table A-5
Phillips PM2.0×3.0 Screw (Continued) mm
Color
Silver
Qty.
10
Length
3.0 mm
Thread
2.0 mm
Head
Width
4.0 mm
Where used:
2 screws that secure the Bluetooth module to the system board (documented in
Phillips PM2.0×3.0 Screw Locations
Maintenance and Service Guide A–19
Screw Listing
Table A-6
Phillips PM2.5×4.0 Screw mm
Color
Black
Qty.
2
Length
4.0 mm
Thread
2.5 mm
Head
Width
5.0 mm
Where used:
2 screws that secure the speaker assembly to the computer (documented in
A–20
Phillips PM2.5×4.0 Screw Locations
Maintenance and Service Guide
Screw Listing
Table A-7
Phillips PM2.0×4.0 Screw mm
Color
Silver
Qty.
2
Length
4.0 mm
Thread
2.0 mm
Head
Width
5.0 mm
Where used:
2 screws that secure the wireless antenna transceivers to the display enclosure
(documented in
Phillips PM2.0×4.0 Screw Locations
Maintenance and Service Guide A–21
Screw Listing
Table A-8
Phillips PM2.5×2.0 Screw mm
Color
Silver
Qty.
3
Length
2.0 mm
Thread
2.5 mm
Head
Width
6.0 mm
Where used:
3 screws that secure the top cover to the base enclosure (documented in
A–22
Phillips PM2.5×2.0 Screw Locations
Maintenance and Service Guide
B
Backup and Recovery in
Windows XP
Recovering System Information
Tools provided by the operating system and PC Recovery software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure:
■ Backing up your information regularly to protect your important system files.
■ Making a set of recovery discs (PC Recovery software feature). Recovery discs are used to start up (boot) your computer and restore the operating system and software programs to factory settings in case of system failure or instability.
■ Creating system restore points (operating system feature).
System restore points allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state.
■ Recovering a program or driver (PC Recovery software feature). This feature helps you reinstall a program or driver without performing a full system recovery.
■ Performing a full system recovery (PC Recovery software feature). With PC Recovery, you can recover your full factory image if you experience system failure or instability.
PC Recovery works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Maintenance and Service Guide B–1
Backup and Recovery in Windows XP
Backing Up Your Information
When to Back Up
■ On a regularly scheduled basis
✎
Set reminders to back up your information periodically.
■ Before the computer is repaired or restored
■ Before you add or modify hardware or software
■
■
Backup Suggestions
■ Create system restore points using Windows XP Professional
System Restore feature.
■ Store personal files in the My Documents folder and back up these folders periodically.
Back up templates stored in their associated programs.
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a Word document: a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc .
To copy the entire screen, press fn+prt sc .
c. To paste the copied images into a document, open Word, and then select Edit > Paste.
B–2 Maintenance and Service Guide
Backup and Recovery in Windows XP
Using System Restore Points
When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system.
✎
Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.
You also can create additional restore points to provide increased protection for your system files and settings.
When to Create Restore Points
■
■
Before you add or extensively modify software or hardware.
Periodically, whenever the system is performing optimally.
✎
If you revert to a restore point and then change your mind, you can reverse the restoration.
Creating a System Restore Point
1. Select Start > Help and Support > System Restore.
The System Restore window opens.
2. Click Create a restore point, and then click Next.
3. Follow the on-screen instructions.
Maintenance and Service Guide B–3
Backup and Recovery in Windows XP
Restoring to a Previous Date and Time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally:
1. Select Start > Help and Support > System Restore.
The System Restore window opens.
2. Click Restore my computer to an earlier time, and then click Next.
3. Follow the on-screen instructions.
Creating Recovery Discs
PC Recovery Disc Creator creates a set of recovery CDs or DVDs for the computer. Use recovery discs to restore the operating system and software programs to factory settings, in case of system failure or instability.
✎
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of recovery discs.
Note the following guidelines before creating recovery discs:
■ You will need high quality CD-R, DVD-R, or DVD+R media
(purchased separately).
✎
DVD±RW/R and double-layer DVD±RW are not compatible with the PC Recovery Disc Creator software.
■
■
The computer must be connected to AC power during this process.
Only one set of recovery discs can be created per computer.
B–4 Maintenance and Service Guide
Backup and Recovery in Windows XP
■ Number each disc before inserting it into the computer optical drive.
■ If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open
PC Recovery Disc Creator, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > System Recovery >
PC Recovery Disc Creator.
The PC Recovery Disc Creator tool opens.
2. Click Next.
✎
If you are operating the computer on battery power, you will be prompted to connect to AC power before you can go to the next step.
3. Select the type of disc you want to use and click Next.
✎
The software examines the image and displays the number of blank discs needed to create your recovery discs.
4. Insert the first disc and follow the on-screen instructions to complete the creation of the recovery discs.
Maintenance and Service Guide B–5
Backup and Recovery in Windows XP
Reinstalling Software Programs and Drivers
If a program or driver preinstalled at the factory is accidentally erased or is damaged, the Application and Driver Recovery tool allows you to reinstall it.
✎
Software not provided with this computer must be reinstalled from the disc provided by the manufacturer or downloaded from the manufacturer's Web site.
✎
Before reinstalling the program, be sure it is fully uninstalled.
The Application and Driver Recovery tool replaces corrupted system files and reinstalls deleted system files within the program.
■ In most cases, if the program you are reinstalling is still on your computer, the reinstallation process does not affect your personal settings.
■ In all cases, if a program has been deleted from your computer, the reinstallation process reinstalls the program or utility to the factory image but cannot restore your personal settings.
Reinstalling Preinstalled Programs and
Drivers
1. Remove the program or driver:
✎
In some cases, drivers are not listed in the Add or Remove
Programs list. If the driver is not listed, it does not need to be removed.
a. Select Start > Control Panel > Add or
Remove Programs.
b. Click the program or driver you want to remove, and then click Change/Remove.
B–6 Maintenance and Service Guide
Backup and Recovery in Windows XP
2. Select Start > All Programs > System Recovery >
Application and Driver Recovery.
The Application and Driver Recovery tool opens.
3. Select Application Installation or Driver Installation, and then click Next.
4. Follow the on-screen instructions to complete the program or driver recovery.
5. Restart the computer if prompted.
Reinstalling Programs from Discs
1. Insert the disc into the optical drive.
2. When the installation wizard opens, follow the installation instructions on the screen.
3. Restart the computer if prompted.
Performing a Recovery
PC Recovery software allows you to repair or restore the system if you experience system failure or instability. PC Recovery works from recovery discs that you create or from a dedicated recovery partition on the hard drive.
✎
Microsoft Windows XP has its own built-in repair features, such as System Restore and driver roll-back capabilities. If you have not already tried these features, try them before using
PC Recovery.
✎
PC Recovery only recovers software that was preinstalled at the factory. Software not provided with this computer must be reinstalled from the disc provided by the manufacturer or downloaded from the manufacturer's Web site.
Maintenance and Service Guide B–7
Backup and Recovery in Windows XP
Recovering from the Recovery Discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the Partition on the
Hard Drive
You can perform a recovery from the partition on the hard drive from either the Start button or f11 .
To restore the system from the partition:
1. Access the PC Recovery tool:
❏ To access PC Recovery from the Start button, select
Start > All Programs > System Recovery >
PC Recovery.
❏ To access PC Recovery from press f11 while the “Press <F11> for recovery” message is displayed on the screen.
f11 , restart the computer and
The PC Recovery tool opens.
2. Select PC Recovery and click Next.
The computer restarts and the PC Recovery tool opens.
3. Click OK.
4. Follow the on-screen instructions to complete the system recovery.
B–8 Maintenance and Service Guide
Backup and Recovery in Windows XP
If you want to perform a destructive recovery:
✎
A destructive recovery formats the hard drive and restores the computer to its factory state. Select this option only as a last resort.
a. Click Advanced Options on the System Recovery screen.
b. Select Destructive Recovery and follow the on-screen instructions.
Deleting the Recovery Partition on the
Hard Drive
The PC Recovery Advanced Options menu provides the option of deleting the recovery partition, which will increase space on the hard drive. Delete the recovery partition only if you have already created recovery discs.
Ä CAUTION: After you create the recovery discs, you can increase space on the hard drive by deleting the recovery partition. However, doing this is not recommended. If you delete this partition, you will lose any information that is on the partition, including the PC Recovery software. Thereafter, you must use the recovery discs to access PC
Recovery software.
To delete the recovery partition:
1. If you have not already created recovery discs, create them now.
2. Select Start > All Programs > System Recovery >
PC Recovery.
The PC Recovery tool opens.
3. Select PC Recovery and click Next.
The computer restarts and the PC Recovery tools opens.
Maintenance and Service Guide B–9
Backup and Recovery in Windows XP
4. Click OK.
5. At the System Recovery screen, click Advanced Options.
6. Select Delete Recovery Partition (not recommended) and follow the on-screen instructions.
Updating Reinstalled Software
After you perform a system recovery, connect to the Internet to update all reinstalled software.
To access update links for the operating system and other software provided on your computer:
» Select Start > Help and Support.
To update optional software, follow the instructions provided by the software manufacturer. Some programs include an update feature you can access from a Help button or menu within the program.
B–10 Maintenance and Service Guide
C
Backup and Recovery in
Windows Vista
Recovering System Information
Tools provided by the operating system and Recovery Manager software are designed to help you with the following tasks for safeguarding your information and restoring it in case of a system failure:
■ Back up your information regularly to protect your important system files.
■ Make a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up (boot) your computer and restore the operating system and software programs to factory settings in case of system failure or instability.
■ Create system restore points (operating system feature).
System restore points allow you to reverse undesirable changes to your computer by restoring the computer to an earlier state.
■ Recover a program or driver (Recovery Manager software feature). This feature helps you reinstall a program or driver without performing a full system recovery.
■ Perform a full system recovery (Recovery Manager software feature). With Recovery Manager, you can recover your full factory image if you experience system failure or instability.
Recovery Manager works from a dedicated recovery partition on the hard drive or from recovery discs you create.
Maintenance and Service Guide C–1
Backup and Recovery in Windows Vista
Backing up Your Information
When to Back Up
■ On a regularly scheduled basis.
✎
Set reminders to back up your information periodically.
■ Before the computer is repaired or restored.
■ Before you add or modify hardware or software.
■
■
Backup Suggestions
■ Create system restore points using the Windows System
Restore feature.
■ Store personal files in the Documents folder and back up these folders periodically.
Back up templates stored in their associated programs.
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings.
The screen shot can be a time saver if you have to reset your preferences.
To copy the screen and paste it into a word-processing document: a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc .
To copy the entire screen, press fn+prt sc .
c. Open a word-processing document, and then select Edit >
Paste.
C–2 Maintenance and Service Guide
Backup and Recovery in Windows Vista
Using System Restore Points
When you back up your system, you are creating a system restore point. A system restore point allows you to save and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you want to reverse subsequent changes made to your system.
✎
Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.
You also can create additional restore points to provide increased protection for your system files and settings.
When to Create Restore Points
■
■
Before you add or extensively modify software or hardware.
Periodically, whenever the system is performing optimally.
✎
If you revert to a restore point and then change your mind, you can reverse the restoration.
Creating a System Restore Point
1. Select Start > Control Panel > System and Maintenance >
System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.
Maintenance and Service Guide C–3
Backup and Recovery in Windows Vista
Restoring to a Previous Date and Time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally, follow these steps:
1. Select Start > Control Panel > System and Maintenance >
System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
Creating Recovery Discs
Recovery Manager creates a set of recovery CDs or DVDs for the computer. Use recovery discs to restore the operating system and software programs to factory settings, in case of system failure or instability.
✎
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of recovery discs.
Note the following guidelines before creating recovery discs:
■ You will need high quality CD-R, DVD-R, or DVD+R discs
(purchased separately).
✎
Formatted DVD ± RW discs and DVD ± RW double-layer discs are not compatible with the Recovery Manager software.
■
■
■
The computer must be connected to AC power during this process.
Only one set of recovery discs can be created per computer.
Number each disc before inserting it into the computer optical drive.
C–4 Maintenance and Service Guide
Backup and Recovery in Windows Vista
■ If necessary, you can exit the program before you have finished creating the recovery discs. The next time you open
Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager >
Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
✎
If you are operating the computer on battery power, you will be prompted to connect to AC power before you can go to the next step.
3. Click Recovery disc creation, and then click Next.
4. Follow the on-screen instructions.
Reinstalling Software Programs and Drivers
If a program or driver preinstalled at the factory is accidentally erased or is damaged, Recovery Manager allows you to reinstall it.
✎
Software not provided with this computer must be reinstalled from the disc provided by the manufacturer or downloaded from the manufacturer's Web site.
✎
Before reinstalling the program, be sure it is fully uninstalled.
Recovery Manager replaces corrupted system files and reinstalls deleted system files within the program.
■ In most cases, if the program you are reinstalling is still on your computer, the reinstallation process does not affect your personal settings.
Maintenance and Service Guide C–5
Backup and Recovery in Windows Vista
■ In all cases, if a program has been deleted from your computer, the reinstallation process reinstalls the program or utility to the factory image but cannot restore your personal settings.
Reinstalling Preinstalled Programs and
Drivers
1. Remove the program or driver:
✎
In some cases, drivers are not listed in the Programs and
Features list. If the driver is not listed, it does not need to be removed.
a. Select Start > Control Panel > Programs > Uninstall a
program.
b. Right-click the program or driver you want to remove, and then click Uninstall.
2. Reinstall the program or driver: a. Select Start > All Programs > Recovery Manager >
Recovery Manager.
Recovery Manager opens.
b. Click Advanced Options.
c. Click either Software program re-installation or
Hardware driver re-installation, and then click Next.
d. Follow the on-screen instructions.
e. Restart the computer if prompted.
Reinstalling Programs from Discs
1. Insert the disc into the optical drive.
2. When the installation wizard opens, follow the installation instructions on the screen.
3. Restart the computer if prompted.
C–6 Maintenance and Service Guide
Backup and Recovery in Windows Vista
Performing a Recovery
Recovery Manager software allows you to repair or restore the system if you experience system failure or instability. Recovery
Manager works from recovery discs that you create or from a dedicated recovery partition on the hard drive.
✎
Windows has its own built-in repair features, such as System
Restore and driver rollback capabilities. If you have not already tried these features, try them before using Recovery Manager.
✎
Recovery Manager only recovers software that was preinstalled at the factory. Software not provided with this computer must be reinstalled from the disc provided by the manufacturer or downloaded from the manufacturer's Web site.
Recovering from the Recovery Discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the Partition on the Hard
Drive
You can perform a recovery from the partition on the hard drive from either the Start button or f11 .
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
❏ Select Start > All Programs > Recovery Manager >
Recovery Manager.
Maintenance and Service Guide C–7
Backup and Recovery in Windows Vista
❏ Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed on the screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions.
Deleting the Recovery Partition on the Hard
Drive
The Recovery Manager Advanced Options menu provides the option of deleting the recovery partition, which will increase space on the hard drive. Delete the recovery partition only if you have already created recovery discs.
Ä CAUTION: After you create the recovery discs, you can increase space on the hard drive by deleting the recovery partition. However, doing this is not recommended. If you delete this partition, you will lose any information that is on the partition, including Recovery Manager software. Thereafter, you must use the recovery discs to access Recovery
Manager software.
To delete the recovery partition:
1. If you have not already created recovery discs, create them now.
2. Select Start > All Programs > Recovery Manager >
Recovery Manager.
Recovery Manager opens.
3. Click Advanced Options.
4. Click Remove recovery partition, and then click Next.
5. Follow the on-screen instructions.
C–8 Maintenance and Service Guide
Backup and Recovery in Windows Vista
Updating Reinstalled Software
After you perform a system recovery, connect to the Internet to update all reinstalled software.
To access update links for the operating system and other software provided on your computer:
» Select Start > Help and Support.
To update optional software, follow the instructions provided by the software manufacturer. Some programs include an update feature you can access from a Help button or menu within the program.
Maintenance and Service Guide C–9
D
Display Component Recycling
Å WARNING: The backlight contains mercury. Caution should be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury.
Ä CAUTION: The procedures in this appendix can result in damage to display components. The only components intended for recycling purposes are the liquid crystal display (LCD) panel and the backlight.
Careful handling should be exercised when removing these components.
✎
Materials Disposal
This HP product contains mercury in the display assembly backlight and may require special handling at end-of-life.
Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities or visit the Electronic Industries Alliance
(EIA) at http://www.eiae.org
.
Maintenance and Service Guide D–1
Display Component Recycling
This appendix provides disassembly instructions for the display assembly. The display assembly must be disassembled to gain access to the backlight 1 and the LCD panel 2.
D–2
✎
Disassembly procedures differ from one display assembly to another. The procedures provided in this appendix are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.
Refer to
Section 5.14, “Display Assembly,”
for display assembly disassembly steps.
Maintenance and Service Guide
Display Component Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
Removing the Display Bezel Screw Covers and Screws
Maintenance and Service Guide D–3
Display Component Recycling
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel until the bezel disengages from the display assembly.
3. Remove the display bezel 3.
Removing the Display Bezel
D–4 Maintenance and Service Guide
Display Component Recycling
4. Disconnect all LCD panel cables 1 from the display inverter board and remove the inverter board 2.
Removing the Display Inverter Board
Maintenance and Service Guide D–5
Display Component Recycling
5. Remove all screws 1 that secure the LCD panel to the display enclosure.
6. Remove the LCD panel 2 from the display enclosure.
Removing the LCD Panel
D–6 Maintenance and Service Guide
Display Component Recycling
7. Turn the LCD panel upside down.
8. Remove all screws that secure the LCD panel frame to the
LCD panel.
Removing the LCD Panel Frame Screws
Maintenance and Service Guide D–7
Display Component Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the side of the LCD panel to the LCD panel frame.
10. Remove the LCD panel frame 2 from the display panel.
Removing the LCD Panel Frame
D–8 Maintenance and Service Guide
Display Component Recycling
11. Remove the screws 1 that secure the backlight cover to the
LCD panel.
12. Lift the top edge of the backlight cover 2 and swing it forward.
13. Remove the backlight cover.
Removing the Backlight Cover
Maintenance and Service Guide D–9
Display Component Recycling
14. Turn the LCD panel right-side up.
15. Remove the backlight cables 1 from the clip 2 in the
LCD panel.
Releasing the Backlight Cables
D–10 Maintenance and Service Guide
Display Component Recycling
16. Turn the LCD panel upside down.
17. Remove the backlight frame from the LCD panel.
Removing the Backlight Frame
Maintenance and Service Guide D–11
Display Component Recycling
Å WARNING: The backlight contains mercury. Caution should be exercised when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury.
18. Slide the backlight out of the backlight frame.
Removing the Backlight
D–12 Maintenance and Service Guide
Display Component Recycling
19. Disconnect the display cable 1 from the LCD panel.
20. Remove the screws 2 that secure the LCD panel to the LCD rear panel.
21. Release the LCD panel 3 from the LCD rear panel.
22. Release the tape 4 that secures the LCD panel to the LCD rear panel.
Releasing the LCD Panel
Maintenance and Service Guide D–13
Display Component Recycling
23. Remove the LCD panel.
Removing the LCD Panel
24. Recycle the backlight and LCD panel.
D–14 Maintenance and Service Guide
E
Connector Pin Assignments
Table D-1
Universal Serial Bus
Pin
1
2
Signal
+5 VDC
Data –
Pin
3
4
Signal
Data +
Ground
Maintenance and Service Guide E–1
Connector Pin Assignments
Table D-2
RJ-45 (Network)
3
4
Pin
1
2
Signal
Transmit +
Transmit –
Receive +
Unused
7
8
Pin
5
6
Signal
Unused
Receive –
Unused
Unused
E–2 Maintenance and Service Guide
Table D-3
S-Video-Out
Connector Pin Assignments
Pin
1
2
3
4
Signal
TV-Ground
TV-CVBS
TV-Ground
TV-Ground
Pin
5
6
7
Signal
TV-CD
TV-Ground
TV-YD
Maintenance and Service Guide E–3
Connector Pin Assignments
Table D-4
External Monitor
5
6
7
3
4
8
Pin
1
2
Signal
Red analog
Green analog
Blue analog
Not connected
Ground
Ground analog
Ground analog
Ground analog
11
12
13
14
15
Pin
9
10
Signal
+5 VDC
Ground
Monitor detect
DDC 2B data
Horizontal sync
Vertical sync
DDC 2B clock
E–4 Maintenance and Service Guide
Table D-5
RJ-11 (Modem)
Connector Pin Assignments
2
3
Pin
1
Signal
Unused
Tip
Ring
5
6
Pin
4
Signal
Unused
Unused
Unused
Maintenance and Service Guide E–5
Connector Pin Assignments
Table D-6
Audio-In (Microphone)
Pin
1
2
Signal
Audio signal in
Audio signal in
Pin
3
Signal
Ground
Table D-7
Audio-Out (Headphone)
Pin
1
2
Signal
Audio out, left channel
Audio out, right channel
Pin
3
Signal
Ground
E–6 Maintenance and Service Guide
F
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region where the computer is used.
Maintenance and Service Guide F–1
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries and regions.
■ The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■ All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country or region where the power cord set will be used.
■ The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by each country or region’s power system.
■ The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
F–2 Maintenance and Service Guide
Power Cord Set Requirements
Country/Region-Specific Requirements
3-Conductor Power Cord Set Requirements
Country/Region
Australia
Austria
Belgium
Canada
Denmark
Finland
France
Germany
Accredited Agency
EANSW
OVE
CEBC
CSA
DEMKO
FIMKO
UTE
VDE
1
1
1
2
1
1
Applicable Note Number
1
1
Italy IMQ 1
Japan METI 3
✎
NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide F–3
Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country/Region
Korea
The Netherlands
Norway
People’s Republic of China
Sweden
Switzerland
Accredited Agency
EK
KEMA
NEMKO
CCC
1
5
Applicable Note Number
4
1
SEMKO
SEV
1
1
Taiwan
United Kingdom
BSMI
BSI
4
1
United States UL 2
✎
NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75 mm² conductor size.
Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75 mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
F–4 Maintenance and Service Guide
Index
1394 port
A
AC adapter, spare part numbers
,
analog TV tuner, spare part number
arrow keys
audio board removal
spare part numbers
,
audio board cable, removal
audio troubleshooting
audio-in (microphone) jack location
pin assignments
audio-out (headphone) jack location
pin assignments
B
backpack, spare part number
Backup and Recovery
Windows Vista
Windows XP
backup suggestions
base enclosure, spare part numbers
battery removal
spare part numbers
specifications
battery bay
battery light
battery release latch
Bluetooth module removal
spare part number
bottom components
C
Cable Kit, spare part number
cables, service considerations
camera cable removal
spare part number
camera module removal
spare part number
Maintenance and Service Guide Index–1
Index
Index–2 caps lock key
caps lock light
carrying case, spare part number
CMOS clearing
components bottom
front
keyboard
left-side
rear
right-side
top
composite S-Video and audio input cable, spare part number
computer feet, locations
Computer Setup
Advanced Menu
File Menu
Security Menu
Tools Menu
computer specifications
connector pin assignments external monitor
headphone
microphone
monitor
RJ-11 (modem)
RJ-45 (network)
S-Video-out
Universal Serial Bus (USB)
connectors, service considerations
consumer infrared lens
creating recovery discs
Windows Vista
Windows XP
system restore point
Windows Vista
Windows XP
D
deleting recovery partition
Windows Vista
Windows XP
design overview
Digital Media Slot
disassembly sequence chart
diskette drive, OS loading problems
display assembly removal
spare part numbers
specifications
display bezel removal
spare part numbers
Display Cable Kit, spare part number
display enclosure spare part numbers
display enclosure, spare part numbers
display hinge removal
spare part number
Maintenance and Service Guide
Index display hinge cover removal
spare part numbers
,
Display Hinge Kit, spare part number
display panel removal
spare part numbers
,
Display Screw Kit, spare part number
docking device, troubleshooting
drive light
drives, preventing damage
DVB-T TV tuner, spare part number
DVD button
DVD/CD-RW Combo Drive
OS loading problems
precautions
removal
spare part number
,
specifications
DVD±RW/R and CD-RW
Combo Drive
OS loading problems
precautions
removal
spare part numbers
,
specifications
E
electrostatic discharge
expansion port 3
ExpressCard assembly removal
spare part number
,
ExpressCard slot
ExpressCard slot bezel illustrated
removal
external monitor port location
pin assignments
F
fan/heat sink assembly removal
spare part numbers
features
feet, locations
flowcharts, troubleshooting no audio
no network/modem connection
no OS loading
no OS loading from diskette drive
no OS loading from hard drive
no OS loading from optical drive
no power
no video
Maintenance and Service Guide Index–3
Index
Index–4 nonfunctioning device
nonfunctioning docking device
nonfunctioning keyboard
nonfunctioning pointing device
fn key
front components
function keys
G
grounding equipment and methods
H
hard drive
OS loading problems
precautions
removal
spare part numbers
,
,
specifications
hard drive bay
Hard Drive Bracket Kit, spare part number
,
hard drive bracket, removal
hard drive cover illustrated
removal
HDMI port
headphone jack location
pin assignments
headset, spare part number
hinge removal
spare part number
hinge cover removal
spare part numbers
I
I/O address specifications
infrared receiver, spare part numbers
interrupt specifications
inverter removal
spare part number
K
keyboard removal
spare part numbers
troubleshooting
keyboard components
keypad keys
L
left-side components
Logo Kit, spare part number
M
mass storage devices, spare part numbers
Maintenance and Service Guide
Index media button
memory module removal
spare part numbers
,
memory module compartment
memory module compartment cover illustrated
removal
microphone location
removal
spare part number
,
microphone jack location
pin assignments
Mini Card module removal
spare part numbers
,
,
,
modem jack location
pin assignments
modem, troubleshooting
monitor port location
pin assignments
mouse, spare part number
N
network jack location
pin assignments
network, troubleshooting
next/fast forward button
nonfunctioning device, troubleshooting
num lock key
num lock light
O
optical drive location
OS loading problems
precautions
removal
spare part numbers
specifications
optical drive bracket, removal
P
packing precautions
password clearing
performing a recovery
Windows Vista
Windows XP
plastic parts
Plastics Kit contents
spare part number
,
play/pause button
pointing device, troubleshooting
power button
Maintenance and Service Guide Index–5
Index
Index–6 power button board removal
spare part number
power connector
power cord set requirements
spare part numbers
,
power light
power management features
power, troubleshooting
previous/rewind button
processor removal
spare part numbers
,
,
R
rear components
recovering from partition on hard drive
Windows Vista
Windows XP
recovering from the recovery discs
Windows Vista
Windows XP
remote control, spare part numbers
,
removal preliminaries
procedures
replacement preliminaries
procedures
RF cable, spare part number
RF input adapter cable, spare part number
right-side components
RJ-11 (modem) jack location
pin assignments
RJ-45 (network) jack location
pin assignments
RTC battery removal
spare part number
Rubber Feet Kit, spare part number
S
Screw Kit, spare part numbers
screw listing
security cable slot
serial number
service considerations
Setup Utility
speaker assembly removal
spare part number
,
speakers
specifications battery
computer
display
Maintenance and Service Guide
Index
DVD/CD-RW Combo
Drive
DVD±RW/R and CD-RW
Combo Drive
hard drive
I/O addresses
interrupts
optical drive
system DMA
static shielding materials
stop button
S-Video-out jack location
pin assignments
switch cover removal
spare part numbers
,
system board removal
spare part numbers
,
,
system DMA
T
tools required
top components
,
top cover removal
spare part numbers
,
top cover support trim removal
spare part numbers
,
TouchPad
TouchPad buttons
TouchPad light
TouchPad on/off button
TouchPad vertical scroll zone
transporting precautions
troubleshooting audio
docking device
flowcharts
keyboard
modem
network
nonfunctioning device
OS loading
overview
pointing device
power
video
TV tuner antenna, spare part numbers
TV tuner remote control, spare part number
TV tuner, spare part numbers
U
Universal Serial Bus (USB) port location
pin assignments
unknown password
USB digital drive, spare part number
USB infrared receiver, spare part number
Maintenance and Service Guide Index–7
Index
USB/power connector board removal
spare part numbers
,
USB/power connector cable, removal
using system restore points
V
vents
video troubleshooting
volume mute button
volume scroll zone
W
Windows applications key
Windows logo key
wireless antenna removal
spare part number
,
wireless laser mouse, spare part numbers
wireless light
wireless switch
workstation precautions
Index–8 Maintenance and Service Guide
advertisement
Key Features
- Vivid 15.4-inch WXGA BrightView display for stunning visuals
- Powerful Intel® Core™ 2 Duo processor for seamless multitasking
- Up to 2GB of DDR2 memory for smooth performance
- Up to 160GB hard drive for ample storage
- DVD+/-RW drive for burning and watching movies and data
- Integrated webcam and microphone for video conferencing
- Built-in Altec Lansing speakers for immersive audio
- Long battery life for extended use away from power outlets