advertisement
8.6
Filter cover/Filter
10
11
5
6
1
2
4
3
7
Item
1
2
3
4
Designation
Bayonet cap
Filter cover
Prefilter
Gasket
9
8
Item
5
6
7
8
Designation
Lower part of the plug
Spark plug cap
Hood
Air filter cartridge
Item
9
10
11
Designation
Internal filter
Torx screw
Gasket
77
Filter cover/Filter
8 Assembly
1.
Lay the internal filter (9) into the intake manifold (x).
x
9
2.
Set the air filter cartridge (8) onto the internal filter (9).
3.
Screw the hood (7) onto the intake manifold (x) with the Torx screws (10).
4.
Insert the seal rings (4,11).
4
11
5.
Insert the lower part of the plug (5).
6.
Attach the spark plug cap (6).
6
7.
Press the prefilter (3) into the filter cover (2).
Note: Align the prefilter (3) with the filter cover holder.
8.
Set the filter cover (2) on top and lock with the bayonet cap (1).
78
Filter cover/Filter
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Foreword
- 7 Safety instructions
- 7 Proper use
- 7 General notes
- 8 Fuel, Lubricants, and Coolants / Filling the tank
- 9 Starting up
- 10 Cutting discs
- 13 Kickback and pulling motion
- 14 Maintenance
- 15 Starting up
- 16 Attaching the cutting disc
- 17 Fuel, lubricants, and coolants
- 19 Storing fuel
- 20 Filling the tank
- 21 Starting the engine
- 22 Cold start
- 23 Warm start
- 23 Turning off the engine
- 24 Setting the carburetor
- 25 Technical data
- 27 Special tools
- 29 Disassembly
- 29 Cover/Handle
- 31 Clutch
- 35 Recoil starter
- 39 Filter cover/Filter
- 41 Ignition system module/intake manifold
- 49 Cylinder/Crankshaft
- 53 Vibration dampers
- 55 Protective hood/V-belt pulley
- 59 Disassembly/Inspection
- 59 Carburetor/Inspection
- 63 Assembly
- 63 Protective hood/V-belt pulley
- 67 Vibration dampers
- 69 Cylinder/Crankshaft
- 75 Ignition system module/intake manifold
- 79 Filter cover/Filter
- 81 Recoil starter
- 85 Clutch
- 89 Cover/Handle
- 91 Malfunction
- 93 Maintenance
- 93 Maintenance schedule
- 95 Cleaning the protective hood
- 96 Replacing the V-belt
- 97 Tightening the V-belt
- 98 Carburetor setting
- 100 Cleaning/Changing the air filter
- 103 Replacing the spark plug
- 105 Replacing the suction head
- 105 Replacing the starter rope
- 106 10.10 Miscellaneous
- 109 Torque values