Factory Settings on Delivery Internet Functions
The following important settings are active without further configuration:
■ External authorisation: International numbers can be dialled from all configured terminals. External lines must be seized by entering a preset code.
■ Call forwarding to internal and external numbers can be activated. Call forwarding after delay is performed after 20 seconds. Door calls and MSN groups can be forwarded. Call diversions for other users and call diversions by other users are deactivated.
■ The telephone lock can be activated. The terminal PIN is “0000”.
■ The white list, black list and call filters are not preconfigured and therefore not active. If these lists are configured, they can be activated for user groups. A special list of emergency phone numbers is preset and activated.
■ The door opener can be opened from all terminals. Door calls can be forwarded.
■ Every standard user can change the configuration of OpenCom 100.
■ Every standard user can create a personal telephone book and edit entries in the central telephone book.
■ Every standard user can read out the charges.
■ Applications requiring a licence (e.g. OpenCount) can be used after being activated.
■ RAS access is not allowed.
■ The multi-company version is not activated.
2.3
Internet Functions
■ RAS access (with or without callback) can be set up for every OpenCom 100 user. RAS access requires activation of the RAS authorisation.
■ More than one mail account query can be set up for every user.
22
Factory Settings on Delivery Internet Functions
■ Every user with a system terminal can be informed automatically of the receipt of e-mails.
■ Users can disconnect existing Internet connections (via the OpenCom 100 Web console and from a system terminal if the function has been configured on that terminal).
The following IP addresses are preset for the network configuration:
■ Host name: host
■ IP address: 192.168.99.254
■ Network mask: 255.255.255.0
The following addresses are transmitted to the client PCs in the LAN via DHCP or
PPP:
■ Gateway address: 192.168.99.254
■ Domain name: domain
■ Domain name server: 192.168.99.254
■ PPP addresses: 192.168.100.0 to 192.168.100.10
■ DHCP addresses: 192.168.99.130 to 192.168.99.169
You can change the IP settings in the Configurator. Check with the network administrator responsible for the LAN if you wish to do this.
23
